Пікірлер

• 
  @carlbModels10 күн бұрын

  If it made that sound for real i wouldn't need to take it out to drive!

• 
  @c-man_adventures25 күн бұрын

  This is 🔥

• 
  @AVilleRCАй бұрын

  Good day That goes a lot faster than a dump truck lol, awesome my friend.

• 
  @thatsmyrcАй бұрын

  Hey buddy thanks, even w/ no traction in the warehouse and batteries down to 10% when I did the pass. You’re correct, a lot faster than my dump trucks 🤣🤣. Thanks again for stopping bye and commenting. Take care buddy 👍🏼

• 
  @Rckid28Ай бұрын

  Where’s the brappp?

• 
  @thatsmyrcАй бұрын

  The braapp is its twin that’s on the bench. Not sure what route I’m going w/ yet. This did have the 2 stroke in it, yet motor had issues once worked those out I pissed a few Karen’s off that threatened to call cops on me. Same day I then took it to big open area. While ripping it, my luck recent storms left a rain puddles hidden in the fields. Long story short truck disappeared then reappeared kept going. Well for awhile, motor must of took in water and damaged top end or the rings from factory gave out. Within think was an issue from start. So I converted this one just to go back to area and piss of the Karen’s again w/ zero noise 🤣🤣. Thanks for stopping bye ✌🏼

• 
  @Rckid28Ай бұрын

  @@thatsmyrc let them call the cops, they call to much for stupid things they will get fines, show the officer your rad ride!!

• 
  @thatsmyrcАй бұрын

  @@Rckid28I told her too, then I thought my luck I was on private property on a day that the school was closed. So I probably would have got a ticket for trespassing as there was signs also saying no trespassing on private property and the old hag would have pressed the issue.

• 
  @carloshnunezАй бұрын

  Cool 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

• 
  @thatsmyrcАй бұрын

  Thanks 👍🏼

• 
  @russellafowler7403Ай бұрын

  Where do you get the Decals for the 360 L like the ones you have ? Love your videos I just bought the same bulldozer & excavator that you have.

• 
  @thatsmyrcАй бұрын

  It’s been some time but I think I got them on Rc4wd website. Either there or aliexpress. Thanks for stopping by to check out the videos and the nice compliment 🙏🏼

• 
  @gerrysoldguyreviewАй бұрын

  Nice to see you back! Now i will have to pull out my 1/5's and see if i can put them back on the road!

• 
  @thatsmyrcАй бұрын

  What’s up Gerry! Thanks for stopping bye. I never knew you had 1/5 scales also. I’ve really fallen off the YT uploading etc thing. Freaking always busy, and when I do get time I like to chill out and build. Thanks again bud 👍🏼 I’ll try to get back into the game sooner or later 🤣

• 
  @xNevlosxАй бұрын

  I'd drill and tap a set screw into the back of the mount.

• 
  @thatsmyrcАй бұрын

  That’s a darn good idea. On the top portuon of the mount that wraps the bearing. There are holes that you can see the bearing yet not threaded. I think I will tap those holes and either add a grub screw or a hex bolt. Thank you for the idea and help 👍🏼🙏🏼

• 
  @user-ox2eu8cw9sАй бұрын

  Shorten the drive shaft on either side to get the play out.

• 
  @thatsmyrcАй бұрын

  Shorten drive shaft? That wouldn’t make any difference. The center diff is held between the tower housing. It’s the housing that’s a smig larger in distance than the outside of both bearings on diff cup. I think I’m going with other commenters thoughts. Tap and add grub screw pressing bearing to stay put, or I might take diff cup apart again to see if I can cram one more shim between the cup and inside of bearing which pushes bearing outwards thus pressing firmly on tower bearing seat. That’s if the cup carrier will allow one more shim do to the holding pin inside the diff cup might be max out pressing tight to the inner side of diff cup.

• 
  @thatsmyrcАй бұрын

  Thanks for the input, it’s harder to explain sometimes than just when you can get your hands on it and visually see the issue. I’m not the best at explaining at times 🤣🤷🏻‍♂️

• 
  @thatsmyrcАй бұрын

  Almost at a loss of what to do if I can’t find a size shim I need 🤷🏻‍♂️ not sure why it’s for the gap it’s all vitavon parts that came with/ kit. Unless the hot racing cup is just a fraction narrower than normal or is vitavon off? Last resort is I could try and buy a vitavon center diff cup?

• 
  @rcplaytimeАй бұрын

  hell of a machine dude 👌😎 hope you sort the problem out 👍👍😀😀👍👍

• 
  @rcplaytimeАй бұрын

  nice 👌 👍

• 
  @thatsmyrcАй бұрын

  Thanks 😊👍🏼

• 
  @kellerluizdossantos7776Ай бұрын

  Which model is this trailer?

• 
  @thatsmyrcАй бұрын

  I’m not exactly sure the brands name. I bought it yrs back. There was a seller on eBay which offered this style. The fitment was perfect for the bc8 yet other trucks like the zetros it would need a spacer under the king pin to bring it up to level. Sorry for not being able to give a direct answer to your question and thanks for viewing.

• 
  @josephglazier32862 ай бұрын

  I would bore it out that fraction - so the bushing on the brake pivot can fit down inside. Vitivon is great, but it is what it is. Ive had to polish and fit my vitivon stuff as well.

• 
  @thatsmyrc2 ай бұрын

  Thanks, I’ve also came across the issue as I had to shim out both sides of aluminum center diff between the vitavon bearings and aluminum diff housing. It pushed the bearings out farther to take slop from side to side movement. I couldn’t get any more shims to work if I wanted too had to do both sides 4 shims 🤷🏻‍♂️

• 
  @TasPerisanidis2 ай бұрын

  hi what wheels and tires are those on your stock losi 5t

• 
  @arakainer2 ай бұрын

  Method RC belted

• 
  @jgminiaturas83192 ай бұрын

  Brasil 🚜👍

• 
  @thatsmyrc2 ай бұрын

  Just getting back into the drivers seat of uploading videos editing etc. Been doing a lot over past yr. And w/ many different scaled rcs. Met some great people all of which are new owners of all my personal line up of construction rc builds. It was a great adventure but time to move on. From arrma, Losi, primal raminators in past yr. I’m now on to building 1/5 scale losi 5t 30n ddt7 rigs So far so good. Taylor Rc motor for one most likely in future to piss off all I can of the Karen’s of the world. And this one electric to see the difference and a no hassle rip it and get it rig 👍🏼 always on to new adventures I like to broaden the mind just like rcs always evolving 🤗

• 
  @hopoweredtrain84552 ай бұрын

  Good to see ya..

• 
  @Chargersctpk2 ай бұрын

  I've had my udr for 4 years so far and my servo still works fine it is a little slower this past year but it's not that bad but I'll probably come to replace it sooner or later for more torque. My other udr is 3 years old and same thing my servo is still fine. Idk what to tell u bro 😂😭

• 
  @Chino-vn3ot3 ай бұрын

  Oh wow that’s bad a$$ Eye candy right there 👍🏽💯

• 
  @thatsmyrc3 ай бұрын

  Thanks man

• 
  @mcemtpockets17754 ай бұрын

  Very cool cutting wheel...very cool

• 
  @jgminiaturas83194 ай бұрын

  Top Brasil 🚜👍

• 
  @jgminiaturas83194 ай бұрын

  Brasil Top 🚜👍

• 
  @MYRCHOBBY5 ай бұрын

  Hey bro. I was looking at a vid about the kabolite 966. I saw you comment about parts. Did yours break? I just bought one. Allot of good reviews and bad ones out there. Whats your opinion? Thanks

• 
  @thatsmyrc5 ай бұрын

  Did you buy the one on eBay that just sold? Someone had one for sale

• 
  @thatsmyrc5 ай бұрын

  They are strong little machines. If there is a leak it’s a complete breakdown of every nut and bolt To fix. Very compact and complex little booger. In the end I still liked it very much, as I did have to completely rebuild mine part by part bought from Tucan hobby as slightly used. It was toasted so I rebuilt it to my needs and personal touches.

• 
  @MYRCHOBBY5 ай бұрын

  I bought mines at toucan hobby. From there US stock. It will be here today. I'm excited and nervous at the same time. I don't think it's the upgraded pump and value version I'll keep my 🤞 . Thanks for responding.

• 
  @MYRCHOBBY5 ай бұрын

  Well, I got it today. I think it’s the 966-100 . It has a metal plate where the battery goes. It is pretty cool but I’m noticing when i reverse the beeping come on and it doesn’t go. I have to do It twice to go . I don’t think that’s right. I’ll play with it for a couple of and if it keeps doing it, I’ll send it back.

• 
  @Webb4RC6 ай бұрын

  Hey what frame is that off of?

• 
  @nicolasarias49676 ай бұрын

  Very nice trscl loader...interested in sell it?

• 
  @chuckdee607 ай бұрын

  Hi would you happen to know the screw size for the top canopy on top of the dozer it has two(4 lb top section,lost mine) ty

• 
  @thatsmyrc7 ай бұрын

  Sorry man don’t know it’s been some time ago. It’s going to be metric on thread count and bolt.

• 
  @gregcarthan44888 ай бұрын

  That paint job is sick!!!😮

• 
  @thatsmyrc8 ай бұрын

  Thanks

• 
  @hopoweredtrain84558 ай бұрын

  Sounds like the real deal Ron ..happy holidays man

• 
  @thatsmyrc8 ай бұрын

  Hey Dave thanks for checking it out. Things are good still catch your vids. Been coming far with layout and the turn table. I’ve kinda lost the steam for YT filming 🤷🏻‍♂️ just enjoying this rig when I get around to it. It’s almost like wrenching on a hot rod 🤣.

• 
  @hopoweredtrain84558 ай бұрын

  @@thatsmyrc I hear u man .yt can be a lot sometimes…it’s always there for sure..put that steam on reserve and catch it when u feel up to it..anyways always here man ..who knows Maybe a layout for ya more relaxing and family involved also …thanks again Ron

• 
  @seansrcconstruction8 ай бұрын

  That’s insane

• 
  @thatsmyrc8 ай бұрын

  Thanks buddy 👍🏼

• 
  @euroboyrc8 ай бұрын

  Havent heard from you in a while. Hope everythings Fine. Greets from Germany

• 
  @thatsmyrc8 ай бұрын

  Thanks buddy for commenting. As for me doing well, just spending more time w/ growing family. These Rc’s will always be around, kiddos are growing up too quickly.

• 
  @metomwhou8 ай бұрын

  I know this is an old video but... Do you by any chance build these for "customers"? I'd love to have one but know that my skills are not up to the task of converting.

• 
  @pwrofgrayskull8 ай бұрын

  Very nice!

• 
  @CLAUDIOSRC95298 ай бұрын

• 
  @jaredwilkins49389 ай бұрын

  Do you have a recommended parts list for this build?

• 
  @jaredwilkins49389 ай бұрын

  Got any more updates on your CASE skid steer conversion?

• 
  @thatsmyrc9 ай бұрын

  Built a few with attachments etc sold them have a few stationary models. If I get bored with free time I might build one again.

• 
  @jaredwilkins49389 ай бұрын

  @@thatsmyrc awesome! I’m looking into converting one myself, do you have your build documented anywhere? I’m looking for some pointers since this’ll be my first one:D

• 
  @jaredwilkins49389 ай бұрын

  Do you have this build documented somewhere? I’m planning on converting this model in the near future. It’ll be my first

• 
  @seansrcconstruction9 ай бұрын

  Hey did you upgrade the motor? Everyone is telling me to use hobbywing all in one. But I don’t think that’ll give me the torque I’m after as it struggles to pull the dozer

• 
  @boostjunkieMike9 ай бұрын

  Nice ❤ thanks for sharing

• 
  @The-Warm-voice13599 ай бұрын

  Congrats Ron And good to see you Again i'm about to buy JZM "LIEBHERR" wheel loader 2plus2 L580 From Oliver But i told him i want upgrade on it i want install jdm 870k sound system instead her Original one Even i want to replace PL CH18 Paladin instead Original FSI6S But i wonder if i Can replace her rims and i put JDM HITACHI wheel loader rims on it I'm waiting for him respond now👍

• 
  @mcemtpockets177510 ай бұрын

  Wow...neato❤ luv it man

• 
  @mcemtpockets177510 ай бұрын

  Crazy skills❤😊❤

• 
  @thatsmyrc10 ай бұрын

  Thanks buddy love the wheeled Bruder skids just fun and always puts a smile on face 👍🏼

• 
  @johnrambo134910 ай бұрын

  Where can we buy this saw? And price?

• 
  @johnrambo134910 ай бұрын

  So how do we buy one of this saw?

• 
  @johnrambo134910 ай бұрын

  How much does the top race 1580 weigh? I purchase the huina verison, it says weight is only 13 lb. The top race on Amazon claim 20 lb. Is it really 20 lb? I find it hard to believe its any heavier than huina full metal verison since both are same size.

• 
  @kl2s4d4kabuki511 ай бұрын

  I want to buy your work send to Thailand please

• 
  @simgaming187411 ай бұрын

  Can i download the file for the forklift?

• 
  @dennybobsrcconstructionagc2796 Жыл бұрын

  I hope to do one of these someday.

• 
  @connorhaistings1362 Жыл бұрын

  Do you have a video on how to make it or could you sell it

• 
  @boared21 Жыл бұрын

  Are you willing to share the file for the window net ? I can't find anything anywhere lol