Do this changes with the "springer" bring more power to the gun?
@dironizareyes5962 ай бұрын
Great video ! Accept Jesus Christ before it’s too late. Christ is coming very soon.
@cristianmora81112 ай бұрын
Que medida es el o ring
@mauricoramos26543 ай бұрын
how much is the thread of the pressure gauge rifle cricket carbine
@hieunhamtv4 ай бұрын
Có bán con ốc chỉnh lò xo bứa ko😊
@sameraloreibi57505 ай бұрын
Hi I found your video helpful even I am not using cricket, I have Vulcan 3 the 500mm and I want to ask a question about adjusting the FP without changing original spring, is it possible to loose the retainer a little bit? Which will give less stress on the original spring?
@jercool5 ай бұрын
Thank you 👍🏻👍🏻👍🏻👍🏻
@rodrigogsmj5 ай бұрын
Congratulations on the channel. Some questions to help me out. Is this system the same as the one in the Cricket 2 WSA? Can I increase the regulator pressure just by opening that Teflon seat very, very slightly without needing to adjust the regulator plates? Thank you 🙏🏻
@fisherman40426 ай бұрын
Muchas gracias amigo,solucione este problema, gracias a tu conocimiento que no has regalado,muchas gracias de parte de un mexicano, saludos 👋hasta donde te encuentras de parte de un mexicano🇲🇽
@fisherman40426 ай бұрын
My cricket has air coming out of that valve, could you tell me why that happens and what should I do?
@fisherman40426 ай бұрын
My cricket has an air leak, but I don't know which of the two regulators is failing😢
@fisherman40426 ай бұрын
Now I understand why my cricket leaks air through the regulator and I haven't been able to go hunting for pigeons for 1 year. I think I need to put new o rings on it🤔,thank you very much bro.
@chamanavenkatesh6 ай бұрын
thanku so much sir 💯
@dannywarren52046 ай бұрын
Any chancenof doing a video like this for the boss owners... we have been left out when it comes to these types of videos... I'd like to know exactly what I'm doing to adjust and repair my regulator.. and gun
@85ZERO176 ай бұрын
Ernest My hammer is stuck projection out in the firing position. Connor retract it with the cocking arm. Essentially it will NOT cock?
@muhammadisrarmuhammadisrar85407 ай бұрын
How are you sir I need regulator tester for vulcan air gun pl help
@justovelarde34568 ай бұрын
Excellent video. Congratulations. A question, WHAT is the best regulator value for a cricket tactical II 60 in .22 caliber for 50 meters? Thank you so much.
@MDCORPORATION8 ай бұрын
Seguo, mi interessa molto
@justovelarde34568 ай бұрын
@@MDCORPORATION 125 - 130 BAR.
@Jeeper13789 ай бұрын
Help i had my hunter compact apart cleaning it up. Put it all back together and had a huge poi shift. Probably should of market the position before removing the sleeve. Any advice ? Was thinking spinning the liner in 1/4’s and seeing if it shoots close to where it was ?
@cs189810 ай бұрын
R3m, r5m or Kalibrgun cricket gen1???
@jamiechapman8682 Жыл бұрын
Hi Ernest, I'm having trouble with a leak from the first hole from the valve assembly low pressure side I have used 2 lots of o rings with the same result leak from first hole from the rear is ther any thing else I could be missing other than o ring 8 thanks for any help
@N71403 Жыл бұрын
Useless. How do I adjust the regulator on my Bobcat. You only showed how to remove it. I need to bring it back to 130 bar as it is 120.
@EzH0fm4nN Жыл бұрын
Greetings from France Sir. If you come back arround here, just a quick question. My Cricket (carabine model but same mechanic I guess) has got a sudden loss of power. When I got it, it was shooting between 260 & 263 m/s. Now, it's only between 220 & 223 m/s. Any idea where the missing 40 metters per second are gone ? I can't hear any leaking. I was thinking about a problem with the regulator but well, the shots are well regulated, just like before when it was shooting at 260. Just, now, it's regulated between 220 & 223 instead of 260 & 263... I'm not sure what's happening. Your thoughts would be appreciated. Thank you !
@charlesstahlheber5457 Жыл бұрын
Are you out there no videos in long time Trying to contact u ..
@hawkslayers1 Жыл бұрын
Hi I’m wondering if anyone can help please my .22 crown mk2 after a service of the regulator isn’t showing any pressure on the gauge I have done a few services on my 2 crowns and I’m stumped I did seem to have a blow back from the side vent but it all seems fine when I took it out to check there’s no leaks whatsoever 🤔
@eduardocosme1997 Жыл бұрын
I can’t adjust my FX Crown MK1 for pellets. Slugs no Way… What’s you recomend ??? Thanks
@fredcarter7003 Жыл бұрын
Can you do an update video for the new style barrels
@menscheliton Жыл бұрын
Ok. A minha vaza no buraco abaixo da válvula, eh uma válvula huma aonde pode ser o problema. Na verdade o cilindro está en Zero ar y não enche já sai direto o ar ali no buraco abaixo da um.
@maarodigro2266 Жыл бұрын
I have FX bobcat MK2 in.25 cal, can i remove sylender with out degas the airgun
@cinemoriahFPV Жыл бұрын
Great a $200 break line with rifling smashed into it. 🤡
@LinhNguyen-bh9ch Жыл бұрын
Có bán nắp bịt đó k
@rolf-erikhafgren1616 Жыл бұрын
Hi Ernest! Love your film. Could you please make a film about how to install o-ring C39 into the Crown mk1 house fot the tegulator? I have very hard to install it. Best Regards Rolf
@menscheliton Жыл бұрын
Como vou saber que válvula usa la mía. Si hay una de 8 mm y una de 10 mm?
@kostadinmi525 Жыл бұрын
Благодаря за видеото!
@SpYucaipaSoCal Жыл бұрын
After removing my gen 1 crown regulator and replacing the adjustment screw and piston. I still have about a 10 bar leak overnight. The culprit should be the oring at the bottom of adjustment screw. But it’s new. I took a close look inside the regulator body where that oring seats. And find tiny scratches in the body. I’m now attempting to polish them out with metal polish liquid and a q tip on a drill. Just remove some of the cotton till a get a semi firm fit. This maybe why some new crowns have creep from the factory.
@SniperBrothers. Жыл бұрын
Sir , i m from India and I have fxcrown.22 mk1 and regulator is already set at 150 bar but i want to know how many time tighten my power wheel spring for good fps and smooth functioning. Please reply i m waiting 🙏🙏 I have not chrony 😭. Please give Idea/approximate no. Of Crank to power wheel spring
@franfasci3366 Жыл бұрын
La isiste vos ala valvula reguladora
@pfv3462 Жыл бұрын
Hoi Ernest, happy New Year! Can you do the dismantling of the cricket II? I want to install a Huma Air regulator but can't find a manual! thanks in advance
@nixosnixos1227 Жыл бұрын
Did u figure out how to install?
@pfv3462 Жыл бұрын
@@nixosnixos1227 No and because I can't find a manual and the kricket is still under warranty I'm going to wait until after the warranty period! Then I will order the regulator from huma-air and give it a try.
@nixosnixos1227 Жыл бұрын
@pfv3462 thanks for taking the time to answer. My cricket is no longer under warranty (original cricket) I have purchased the regulator but they don't have on the website any instructions regarding cricket (they have for a bunch of other brands). I emailed them about this issue and I'm still waiting for an answer. Also tomorrow I'm going to buy a 27mm socket and grind it to be able to dismantle the gauge. I have a leak from the gauge side.
@nixosnixos1227 Жыл бұрын
I got an answer Dear Nixos, It will directly replace the mounted regulator. So diassemble the gun, remove factory regulator, install ours. That is all there is to it. For disassembly we would like to point you to the factory exploded diagram. All the best
@buckhunter4496 Жыл бұрын
That spring is to long which restrict the air flow
@AnythingtosharE Жыл бұрын
Good day. May I ask what is the size of the manometer on crown. Thanks
@jp8351 Жыл бұрын
Hi How do you remove the stainless adapter from the tube? it feels glued on my M3. I need to remove it as the seal inside it came out with the other 3 o rings :(.
@richoperezinho7215 Жыл бұрын
@ ernest How i can do i cant put the part that is on hammer is more big
@daeijalhosni Жыл бұрын
I have 50 bars per day leaks in my Fx crown. Both gauge always show same pressure. What part could be the reasons 🤔
@fahadal-habsi2404 Жыл бұрын
Thanks for video… very valuable Where can I get the regulator tester?
@nsboost Жыл бұрын
The 8x1 o ring that you don't have a tool for. How and where exactly does it go in? My impact is missing that o ring and I'm trying to figure out how to put it in. Mine is a .25 so its a 9x1
@jp8351 Жыл бұрын
I also would be needing the info on how to taking the barrel apart and replacing that o ring
@nsboost Жыл бұрын
@@jp8351 unscrew the shroud by grabbing it with your hands and spin it off.. use a crescent wrench or box end wrench to unscrew the threaded part in the end of the barrel. Then remove the Allen headed set screw at the back of the barrel where is slides into the block. Then pull on the barrel and it will slide out. Then you will have to unscrew the barrel sleeve from the barrel inlet/brass fitting.
@nsboost Жыл бұрын
@@jp8351 You can pull the barrel liner out before you pull the set screw. But that's kinda up to you
@jp8351 Жыл бұрын
Stainless part feels glued. Did you have to use a lot of heat to undo the stainless part? Or am I wrong on the glue part?
@jp8351 Жыл бұрын
got the stainless part and the tube undone. Used a micro welding torch (dremel versatip) went super fast and easy :). also found a easy way to clamp that part in a vise without scratching it, I use some aluminum foil wrapped fairly thick around the stainless/brass part. zero scratched :)
@JuanFernandez-ox8pj Жыл бұрын
Amigo entones para Mallorca potencia hay q apretar poco verdad
@Erasmuspipebagger1 Жыл бұрын
Hi Ernest apologies if you've made a correction, but at 3:09, the o-ring is 4x1.5 (it is on mine and in the service kits) Best regards Mark.
@JuanFernandez-ox8pj Жыл бұрын
Hola estoy interesado en aumenta la potencia de cricket kalibrgun me podía aconsejar por favor
@juangugueto Жыл бұрын
Where did you buy the gauge tool?
@edd9384 Жыл бұрын
Thank you for these videos. After years of good service and a few o ring changes my R3 is all over the place! power wise. I think i need a few new parts. Could you let me know where i can buy regulator parts ? I am in the UK. Many thanks.
Пікірлер
You don't have a camera treepod?
Do this changes with the "springer" bring more power to the gun?
Great video ! Accept Jesus Christ before it’s too late. Christ is coming very soon.
Que medida es el o ring
how much is the thread of the pressure gauge rifle cricket carbine
Có bán con ốc chỉnh lò xo bứa ko😊
Hi I found your video helpful even I am not using cricket, I have Vulcan 3 the 500mm and I want to ask a question about adjusting the FP without changing original spring, is it possible to loose the retainer a little bit? Which will give less stress on the original spring?
Thank you 👍🏻👍🏻👍🏻👍🏻
Congratulations on the channel. Some questions to help me out. Is this system the same as the one in the Cricket 2 WSA? Can I increase the regulator pressure just by opening that Teflon seat very, very slightly without needing to adjust the regulator plates? Thank you 🙏🏻
Muchas gracias amigo,solucione este problema, gracias a tu conocimiento que no has regalado,muchas gracias de parte de un mexicano, saludos 👋hasta donde te encuentras de parte de un mexicano🇲🇽
My cricket has air coming out of that valve, could you tell me why that happens and what should I do?
My cricket has an air leak, but I don't know which of the two regulators is failing😢
Now I understand why my cricket leaks air through the regulator and I haven't been able to go hunting for pigeons for 1 year. I think I need to put new o rings on it🤔,thank you very much bro.
thanku so much sir 💯
Any chancenof doing a video like this for the boss owners... we have been left out when it comes to these types of videos... I'd like to know exactly what I'm doing to adjust and repair my regulator.. and gun
Ernest My hammer is stuck projection out in the firing position. Connor retract it with the cocking arm. Essentially it will NOT cock?
How are you sir I need regulator tester for vulcan air gun pl help
Excellent video. Congratulations. A question, WHAT is the best regulator value for a cricket tactical II 60 in .22 caliber for 50 meters? Thank you so much.
Seguo, mi interessa molto
@@MDCORPORATION 125 - 130 BAR.
Help i had my hunter compact apart cleaning it up. Put it all back together and had a huge poi shift. Probably should of market the position before removing the sleeve. Any advice ? Was thinking spinning the liner in 1/4’s and seeing if it shoots close to where it was ?
R3m, r5m or Kalibrgun cricket gen1???
Hi Ernest, I'm having trouble with a leak from the first hole from the valve assembly low pressure side I have used 2 lots of o rings with the same result leak from first hole from the rear is ther any thing else I could be missing other than o ring 8 thanks for any help
Useless. How do I adjust the regulator on my Bobcat. You only showed how to remove it. I need to bring it back to 130 bar as it is 120.
Greetings from France Sir. If you come back arround here, just a quick question. My Cricket (carabine model but same mechanic I guess) has got a sudden loss of power. When I got it, it was shooting between 260 & 263 m/s. Now, it's only between 220 & 223 m/s. Any idea where the missing 40 metters per second are gone ? I can't hear any leaking. I was thinking about a problem with the regulator but well, the shots are well regulated, just like before when it was shooting at 260. Just, now, it's regulated between 220 & 223 instead of 260 & 263... I'm not sure what's happening. Your thoughts would be appreciated. Thank you !
Are you out there no videos in long time Trying to contact u ..
Hi I’m wondering if anyone can help please my .22 crown mk2 after a service of the regulator isn’t showing any pressure on the gauge I have done a few services on my 2 crowns and I’m stumped I did seem to have a blow back from the side vent but it all seems fine when I took it out to check there’s no leaks whatsoever 🤔
I can’t adjust my FX Crown MK1 for pellets. Slugs no Way… What’s you recomend ??? Thanks
Can you do an update video for the new style barrels
Ok. A minha vaza no buraco abaixo da válvula, eh uma válvula huma aonde pode ser o problema. Na verdade o cilindro está en Zero ar y não enche já sai direto o ar ali no buraco abaixo da um.
I have FX bobcat MK2 in.25 cal, can i remove sylender with out degas the airgun
Great a $200 break line with rifling smashed into it. 🤡
Có bán nắp bịt đó k
Hi Ernest! Love your film. Could you please make a film about how to install o-ring C39 into the Crown mk1 house fot the tegulator? I have very hard to install it. Best Regards Rolf
Como vou saber que válvula usa la mía. Si hay una de 8 mm y una de 10 mm?
Благодаря за видеото!
After removing my gen 1 crown regulator and replacing the adjustment screw and piston. I still have about a 10 bar leak overnight. The culprit should be the oring at the bottom of adjustment screw. But it’s new. I took a close look inside the regulator body where that oring seats. And find tiny scratches in the body. I’m now attempting to polish them out with metal polish liquid and a q tip on a drill. Just remove some of the cotton till a get a semi firm fit. This maybe why some new crowns have creep from the factory.
Sir , i m from India and I have fxcrown.22 mk1 and regulator is already set at 150 bar but i want to know how many time tighten my power wheel spring for good fps and smooth functioning. Please reply i m waiting 🙏🙏 I have not chrony 😭. Please give Idea/approximate no. Of Crank to power wheel spring
La isiste vos ala valvula reguladora
Hoi Ernest, happy New Year! Can you do the dismantling of the cricket II? I want to install a Huma Air regulator but can't find a manual! thanks in advance
Did u figure out how to install?
@@nixosnixos1227 No and because I can't find a manual and the kricket is still under warranty I'm going to wait until after the warranty period! Then I will order the regulator from huma-air and give it a try.
@pfv3462 thanks for taking the time to answer. My cricket is no longer under warranty (original cricket) I have purchased the regulator but they don't have on the website any instructions regarding cricket (they have for a bunch of other brands). I emailed them about this issue and I'm still waiting for an answer. Also tomorrow I'm going to buy a 27mm socket and grind it to be able to dismantle the gauge. I have a leak from the gauge side.
I got an answer Dear Nixos, It will directly replace the mounted regulator. So diassemble the gun, remove factory regulator, install ours. That is all there is to it. For disassembly we would like to point you to the factory exploded diagram. All the best
That spring is to long which restrict the air flow
Good day. May I ask what is the size of the manometer on crown. Thanks
Hi How do you remove the stainless adapter from the tube? it feels glued on my M3. I need to remove it as the seal inside it came out with the other 3 o rings :(.
@ ernest How i can do i cant put the part that is on hammer is more big
I have 50 bars per day leaks in my Fx crown. Both gauge always show same pressure. What part could be the reasons 🤔
Thanks for video… very valuable Where can I get the regulator tester?
The 8x1 o ring that you don't have a tool for. How and where exactly does it go in? My impact is missing that o ring and I'm trying to figure out how to put it in. Mine is a .25 so its a 9x1
I also would be needing the info on how to taking the barrel apart and replacing that o ring
@@jp8351 unscrew the shroud by grabbing it with your hands and spin it off.. use a crescent wrench or box end wrench to unscrew the threaded part in the end of the barrel. Then remove the Allen headed set screw at the back of the barrel where is slides into the block. Then pull on the barrel and it will slide out. Then you will have to unscrew the barrel sleeve from the barrel inlet/brass fitting.
@@jp8351 You can pull the barrel liner out before you pull the set screw. But that's kinda up to you
Stainless part feels glued. Did you have to use a lot of heat to undo the stainless part? Or am I wrong on the glue part?
got the stainless part and the tube undone. Used a micro welding torch (dremel versatip) went super fast and easy :). also found a easy way to clamp that part in a vise without scratching it, I use some aluminum foil wrapped fairly thick around the stainless/brass part. zero scratched :)
Amigo entones para Mallorca potencia hay q apretar poco verdad
Hi Ernest apologies if you've made a correction, but at 3:09, the o-ring is 4x1.5 (it is on mine and in the service kits) Best regards Mark.
Hola estoy interesado en aumenta la potencia de cricket kalibrgun me podía aconsejar por favor
Where did you buy the gauge tool?
Thank you for these videos. After years of good service and a few o ring changes my R3 is all over the place! power wise. I think i need a few new parts. Could you let me know where i can buy regulator parts ? I am in the UK. Many thanks.