These are very dangerous if your left handed. Scoulded arms are bound to happen
@liamtheplumber19 күн бұрын
Doesn’t matter which hand you are, I’m right handed as shown. Left handed works just the same
@Tom-hl7wc9 күн бұрын
If you’re an idiot you will surely suffer many accidents in your life. If you’re gonna be dumb you better be tough.
@SadiTaichouАй бұрын
Finally, we've been telling the Nerrad rep to bring these out for a while now
@liamtheplumber27 күн бұрын
Glad they’re bringing it out!
@SadiTaichou27 күн бұрын
@@liamtheplumber Going to have to get it on the company account slyly 😬
@AlexRocks24-7Ай бұрын
About time 👏
@liamtheplumber27 күн бұрын
Definitely!
@cjbhoy87Ай бұрын
Hey bud do you know what this new kit is called with the longer sockets and when they are releasing it?
@liamtheplumber27 күн бұрын
They’ll release it soon but I think they just referred to it as the “tapex extension kit”. 👍🏻
@deano6017Ай бұрын
how did that bit in your impact go through the brick so easy
@liamtheplumber27 күн бұрын
It’s a Fischer hex drill bit 👍🏻
@shishir0472Ай бұрын
thanks' for share
@ToolReviewsofToolsIUseАй бұрын
Great vid mate
@pault37052 ай бұрын
Reviews on toolstation and screwfix are poor. Dont fit a lot of nuts...grips will always fit.
@fischerfixingsuk2 ай бұрын
DuoTec 💪
@liamtheplumber2 ай бұрын
Thankyou for all the likes and comments guys!🙌🏻
@Thorpe142 ай бұрын
What fixings are these?
@deano60172 ай бұрын
great video mate. have you used Dan stokes I think it is pipe cleaners. Thinking of getting them but I don't know how long they last and if they are worth it.
@ashleymapes39262 ай бұрын
The amount of times I have been talking to someone and pulled a bend in the wrong direction 😂. Your not alone mate
@CommercialGasEngineerVideos2 ай бұрын
It's not easy being a plumber. Have to always have your weetabix and bring your A game to work.
@gabrielbenavides7082 ай бұрын
Replace that shit
@deathstr0kexorn7652 ай бұрын
Give the apprentice the rad tail Allen keys, make them work. With the olive cutters I’d say teach them with a junior hacksaw first so olive cutters later on
@AlexanderAtterwell2 ай бұрын
Is that for a over flow or a spout or something?
@sleektoneofficial3 ай бұрын
Definitly want a sliding square
@pjgtech3 ай бұрын
Nice video thanx, Tools have certainly got better since I was a plumber 35 years ago!!! Lol... As an apprentice I had, small/large Footprint grips, junior and large hacksaw, tape measure, mini level, 15mm/22mm pipe bending springs, small hammer (claw), small jimmy/crowbar, some basic screwdrivers (flat and philips), a Rothenberger basin wrench, an old cigarette tin full of washers, olives, etc, all held in a large canvas bag. Also had a full set of drain rods and a plunger! I'm surprised no-one seems to use Footprint grips anymore, in my day every plumber had them? Cheers
@chorltondragon3 ай бұрын
Thanks for this. We're getting a new kitchen soon and it's interesting to see how the Quooker tap goes in. And how to use it :)
@jacko28153 ай бұрын
Replace not worth the messing around get on to next job
@nazar97943 ай бұрын
All that’s for a tap..
@brendanfisher25283 ай бұрын
Cocked these up on a claw foot bath before. Dunno how!
@DamoSaysThis3 ай бұрын
This is true it’s the difference between earning and not earning 💯
@AlexRocks24-73 ай бұрын
100% replace
@Purebeltersteve3 ай бұрын
Dont think ive ever done it lol
@liamtheplumber3 ай бұрын
Fair enough!
@jeffbradley77553 ай бұрын
What tools are the silicone tools in the little plastic container with lid on it?
@liamtheplumber3 ай бұрын
The green set is from screwfix and the Cramer kit can be found on Amazon 👍🏻
@jacko28153 ай бұрын
I never do. 99% o times never need to
@AlexRocks24-73 ай бұрын
Got one on Monday 10am in Kew 🤓
@jacko28153 ай бұрын
Those waste back nut spanners barely fit any wastes
@timothygraves61623 ай бұрын
Great job today, so well explained aswell.thanks, keep up the good work.👍
@liamtheplumber3 ай бұрын
Thankyou!
@no-ic3rg3 ай бұрын
Great job. What silicone do you use?
@liamtheplumber3 ай бұрын
Thanks! Fischer multi ms 👍🏻
@ladonna42343 ай бұрын
i dont get it
@DavidHannaford-ff1sw3 ай бұрын
Usually grips but might be tempted to get those box spanner’s 👌🏻
@liamtheplumber3 ай бұрын
Handy to have
@craigallan72804 ай бұрын
You do still need the hot, it’ll only do boiling, the low pressure hot wouldn’t affect the quooker as it’s cold mains that fills it then it’s boiled
@liamtheplumber4 ай бұрын
All quookers require a minimum pressure in order to operate. This house has mains cold but gravity hot water. This the reason for the “combi” tank as it only requires the cold mains. A quooker tap will not work or function correctly with a gravity hot water. Therefore in this case the hot feed has been blanked off. Only the cold mains is connected and that’s what feeds the tap.
@pabloplumbcobar6964 ай бұрын
One word for you Liam , moist ! It’s how you make me feel
@kamaldahal46724 ай бұрын
Could you tell the price for those jobs plz, just to know how much to charge as I’m new tks
@liamtheplumber3 ай бұрын
Wouldn’t know unfortunately as I don’t get involved in the pricing
@CommercialGasEngineerVideos4 ай бұрын
Go on Liam. Nice early Sunday morning vid to wake us up.
@liamtheplumber3 ай бұрын
Haha cheers!
@peterarmer90694 ай бұрын
Liam great work mate but i have a problem with mine i have had it for about 9 years it a 01 Basic handle tap you just push it down and turn, but now it leaks every time i turn it on and hot water and steam leaks allover my work top. I know its a seal or wash wanted but i can not see how the handle comes off ? now trying to get in touch with quooker is a nightmare ? I even tried to book a service on line but the time slot is the end of June 2024 by then one of us will end up getting burned. I have searched the web to find how to removed the handle because Quooker have not answered my emails and no susses from the internet any help would be much appreciated. Regards peter
@liamtheplumber4 ай бұрын
Genuinely keep on trying with quooker. There’s no advice I can give I’m afraid as it’s a job for a quooker engineer 👍🏻
@davesstuff15994 ай бұрын
For sealing though?
@liamtheplumber4 ай бұрын
Yes rapid blue seals 👍🏻
@tirvplumbing4 ай бұрын
Nice clean install 👍
@liamtheplumber4 ай бұрын
Thanks 👍
@jacko28154 ай бұрын
What do you use the set squar for?been plumbing 16 years no idea why you got one lol
@liamtheplumber4 ай бұрын
Use it for all the carpentry work, like in bathrooms and I use it for multipanel boards aswell 👍🏻
@jacko28154 ай бұрын
@@liamtheplumber nice one mate I thought you was somensort of plumbing doing somin I didn't no about lol
@Purebeltersteve4 ай бұрын
Was that stitched lagging or did you wrap it as ive a job chasing 22mm into floors to do dwnstairs rads
@liamtheplumber4 ай бұрын
Slide on lagging mate 👍🏻
@owsi22974 ай бұрын
Great video mate 👏
@danny4820054 ай бұрын
Loctite 577 every time. Made my thousands of fittings using it and never had issues.
@tracyjones91705 ай бұрын
Followed all instructions. No filter water coming through. What am I doing wrong? Thanks for any advice
@liamtheplumber5 ай бұрын
Best advice is to contact quooker directly. Hope that helps
@SmartPipePlumbing5 ай бұрын
Rapid blue for the win 💯
@MJ-ce6tv5 ай бұрын
This stuff is great and I use it on rad tails. I have been tempted to use it on taps but how easy are they to remove when they’re glued like this? I don’t know about anyone else but when I come to a dodgy outside tap, I simply unscrew and pop a brand new one on. This rapid blue could make that a bit of a challenge right? Maybe I’m wrong but I’d like to hear your thoughts. Thanks. Marcus.
@GasTraining5 ай бұрын
Bit of heat on it and you’re good to go
@MJ-ce6tv5 ай бұрын
@@GasTrainingThanks. 👍🏻
@liamtheplumber5 ай бұрын
Lightly heat it up and it’ll unwind nice and easy 👍🏻
@ashleymapes39265 ай бұрын
I tend to just drop the pressure out the valve if im doing them on a combi system its quicker i find.
@Heatking5 ай бұрын
Looks a really neat first fix, they always look best in copper ❤ however… Speedfit does have its time and a place. Great video Liam. 😊
Пікірлер
These are very dangerous if your left handed. Scoulded arms are bound to happen
Doesn’t matter which hand you are, I’m right handed as shown. Left handed works just the same
If you’re an idiot you will surely suffer many accidents in your life. If you’re gonna be dumb you better be tough.
Finally, we've been telling the Nerrad rep to bring these out for a while now
Glad they’re bringing it out!
@@liamtheplumber Going to have to get it on the company account slyly 😬
About time 👏
Definitely!
Hey bud do you know what this new kit is called with the longer sockets and when they are releasing it?
They’ll release it soon but I think they just referred to it as the “tapex extension kit”. 👍🏻
how did that bit in your impact go through the brick so easy
It’s a Fischer hex drill bit 👍🏻
thanks' for share
Great vid mate
Reviews on toolstation and screwfix are poor. Dont fit a lot of nuts...grips will always fit.
DuoTec 💪
Thankyou for all the likes and comments guys!🙌🏻
What fixings are these?
great video mate. have you used Dan stokes I think it is pipe cleaners. Thinking of getting them but I don't know how long they last and if they are worth it.
The amount of times I have been talking to someone and pulled a bend in the wrong direction 😂. Your not alone mate
It's not easy being a plumber. Have to always have your weetabix and bring your A game to work.
Replace that shit
Give the apprentice the rad tail Allen keys, make them work. With the olive cutters I’d say teach them with a junior hacksaw first so olive cutters later on
Is that for a over flow or a spout or something?
Definitly want a sliding square
Nice video thanx, Tools have certainly got better since I was a plumber 35 years ago!!! Lol... As an apprentice I had, small/large Footprint grips, junior and large hacksaw, tape measure, mini level, 15mm/22mm pipe bending springs, small hammer (claw), small jimmy/crowbar, some basic screwdrivers (flat and philips), a Rothenberger basin wrench, an old cigarette tin full of washers, olives, etc, all held in a large canvas bag. Also had a full set of drain rods and a plunger! I'm surprised no-one seems to use Footprint grips anymore, in my day every plumber had them? Cheers
Thanks for this. We're getting a new kitchen soon and it's interesting to see how the Quooker tap goes in. And how to use it :)
Replace not worth the messing around get on to next job
All that’s for a tap..
Cocked these up on a claw foot bath before. Dunno how!
This is true it’s the difference between earning and not earning 💯
100% replace
Dont think ive ever done it lol
Fair enough!
What tools are the silicone tools in the little plastic container with lid on it?
The green set is from screwfix and the Cramer kit can be found on Amazon 👍🏻
I never do. 99% o times never need to
Got one on Monday 10am in Kew 🤓
Those waste back nut spanners barely fit any wastes
Great job today, so well explained aswell.thanks, keep up the good work.👍
Thankyou!
Great job. What silicone do you use?
Thanks! Fischer multi ms 👍🏻
i dont get it
Usually grips but might be tempted to get those box spanner’s 👌🏻
Handy to have
You do still need the hot, it’ll only do boiling, the low pressure hot wouldn’t affect the quooker as it’s cold mains that fills it then it’s boiled
All quookers require a minimum pressure in order to operate. This house has mains cold but gravity hot water. This the reason for the “combi” tank as it only requires the cold mains. A quooker tap will not work or function correctly with a gravity hot water. Therefore in this case the hot feed has been blanked off. Only the cold mains is connected and that’s what feeds the tap.
One word for you Liam , moist ! It’s how you make me feel
Could you tell the price for those jobs plz, just to know how much to charge as I’m new tks
Wouldn’t know unfortunately as I don’t get involved in the pricing
Go on Liam. Nice early Sunday morning vid to wake us up.
Haha cheers!
Liam great work mate but i have a problem with mine i have had it for about 9 years it a 01 Basic handle tap you just push it down and turn, but now it leaks every time i turn it on and hot water and steam leaks allover my work top. I know its a seal or wash wanted but i can not see how the handle comes off ? now trying to get in touch with quooker is a nightmare ? I even tried to book a service on line but the time slot is the end of June 2024 by then one of us will end up getting burned. I have searched the web to find how to removed the handle because Quooker have not answered my emails and no susses from the internet any help would be much appreciated. Regards peter
Genuinely keep on trying with quooker. There’s no advice I can give I’m afraid as it’s a job for a quooker engineer 👍🏻
For sealing though?
Yes rapid blue seals 👍🏻
Nice clean install 👍
Thanks 👍
What do you use the set squar for?been plumbing 16 years no idea why you got one lol
Use it for all the carpentry work, like in bathrooms and I use it for multipanel boards aswell 👍🏻
@@liamtheplumber nice one mate I thought you was somensort of plumbing doing somin I didn't no about lol
Was that stitched lagging or did you wrap it as ive a job chasing 22mm into floors to do dwnstairs rads
Slide on lagging mate 👍🏻
Great video mate 👏
Loctite 577 every time. Made my thousands of fittings using it and never had issues.
Followed all instructions. No filter water coming through. What am I doing wrong? Thanks for any advice
Best advice is to contact quooker directly. Hope that helps
Rapid blue for the win 💯
This stuff is great and I use it on rad tails. I have been tempted to use it on taps but how easy are they to remove when they’re glued like this? I don’t know about anyone else but when I come to a dodgy outside tap, I simply unscrew and pop a brand new one on. This rapid blue could make that a bit of a challenge right? Maybe I’m wrong but I’d like to hear your thoughts. Thanks. Marcus.
Bit of heat on it and you’re good to go
@@GasTrainingThanks. 👍🏻
Lightly heat it up and it’ll unwind nice and easy 👍🏻
I tend to just drop the pressure out the valve if im doing them on a combi system its quicker i find.
Looks a really neat first fix, they always look best in copper ❤ however… Speedfit does have its time and a place. Great video Liam. 😊
Thanks 👍