Is there anywhere i can buy them from i really want a vfc bcm gbbr really bad i like yhe 11.5 but cant find them anywhere any ideas or do you still have the current one an wanna sell it ?
@fubarbundyairsoft46463 ай бұрын
Hi Dustin we may be able to help please send an email to [email protected]
@Gisborne19906 ай бұрын
the cut out of front of grip to grab mag is ugly asf, why is it even needed? My mags literally drop out when the release is slightly touched, don't even need to touch the mag...
@fubarbundyairsoft46466 ай бұрын
The real G17 has the cut in the grip as it’s a vital if you have a stuck mag in the grip.
@Gisborne19906 ай бұрын
I've just ordered an WE G17F Gen5, Which is the french edition, I wanted this so it doesn't have the cut out. The Umarex 17 gen5 french has the cut out, but the real one doesn't? so the umarex one is not using the proper version.@@fubarbundyairsoft4646
@justincurll11108 ай бұрын
Nice to see a mature adult making an airsoft video. Getting tired of 20 somethings c-clamping to generic guitar music.
@DNH1710 ай бұрын
I don't understand how you moved from a 14” barrel to a shorter one. This literally looks like the CQB after your changes. Does the Angry ris kit includes a shorter barrel? Thanks for this review. wow that stock has ton of extra storage. Angry gun L1192 Rail Magpul ACS (modified for 1300 pq battery) Acog FMA Pq AFG model 1 (grip) Surefire flash hider Nice. Maybe it's better to buy the skeleton at this point? Or just go for the PTW... but maybe PTW is an older technology compared to GBLS?
@Droodog12711 ай бұрын
where can I get the case?
@anthonyseverino829211 ай бұрын
I was wondering if you got a chance to shoot to yourself, how far are you able to shoot out on yours?
@Saphy_Bagel Жыл бұрын
I wish VFC would come out with a better stock for these Avalon guns. The QRS stuff is mediocre all around. The stock was the first thing I upgraded when I bought my VFC Avalon Calibur CQC back in 2018.
@TedHeath373 Жыл бұрын
Beautiful! Does Archwick sell the shorter upper too? Rather than two full systems
@reaperairsoftgv53 Жыл бұрын
I have a hard time filling my mags
@Gaz258th Жыл бұрын
the grenade lug on the original had the same securing screw
@anthonywood9632 Жыл бұрын
kzread.info/dash/bejne/Z3asqLOPl5fOmMo.html
@anthonywood9632 Жыл бұрын
Video of Korean range test
@benchapman2703 Жыл бұрын
Great video and love the rif.
@dzartolineo Жыл бұрын
Looks sweet.
@user-sd3uh9yd7p Жыл бұрын
Hello sir we are maker of AEGIS FMG-9! Thank you for making review of our product :) I sent email please check ^^
@zybersniper Жыл бұрын
Hello Aegis, would like to know if you are still sending out the modified pins with e clips that were falling out (as shown by AirSix's video).Is it also possible to order more magazine baseplates? Thanks!
@ContentChaser Жыл бұрын
Wish I could find a place that ships this to the US
@AlgerLapitan Жыл бұрын
Same 😭
@jeff_chan Жыл бұрын
This would be a bit difficult due to rights owned by Magpul, a US company and they’ve also licensed this for sale by PTS.
@pspmaster510 Жыл бұрын
@@jeff_chan Evike was selling them just recently.
@jeff_chan Жыл бұрын
@@pspmaster510 I saw this too. But it’s also labelled as Laylax, a company that seems to own some licensing rights like Umarex. Maybe they got that sorted out.
@pspmaster510 Жыл бұрын
@Jeff Chan Most likely magpul doesn't care enough about a 10 year old unreleased product. Laylax probably doesn't have a license but rather distribution rights.
@badgerstrike8785 Жыл бұрын
ignore all the hate! great video thank you!
@micahwallin6918 Жыл бұрын
What did it say the rate of fire was?
@MrDoctour Жыл бұрын
Funny I got mine and I’m not seeing a metal badge anyway. Fuckers at the store must’ve taken it out the box
@patstrzeszewski3240 Жыл бұрын
They should make conversion kits for the Dutch rifles
@patstrzeszewski3240 Жыл бұрын
C tech should make a long version
@MidWestJigga Жыл бұрын
How do you adjust the gas flow good sir? Trying to figure that out
@fubarbundyairsoft4646 Жыл бұрын
There is an adjustable nozzle (floating valve) inside the loading nozzle it requires small adjustments with an Allen key (think it’s 1.5mm)
@oscarbadman18742 жыл бұрын
That's more of a compensator
@galaxygamer86492 жыл бұрын
What is the muzzle device if you have any link for i it I’d like to buy it
@fubarbundyairsoft46462 жыл бұрын
No sorry it just comes with the BCM
@OlRunnyEggs2 жыл бұрын
When you can let me know how to order some and I will… was trying to order 10
@fubarbundyairsoft46462 жыл бұрын
Sold out of our first batch second is due in 4 weeks
@OlRunnyEggs2 жыл бұрын
@@fubarbundyairsoft4646 where can I message you to try and order some when you get more in
@@fubarbundyairsoft4646 how can I go about ordering them.. I’ve been looking for these mags everywhere so it would be greatly appreciated
@fubarbundyairsoft46462 жыл бұрын
We have the Valken Surge in stock
@fionanicholson44862 жыл бұрын
Do you guys do gel blasters.?
@fubarbundyairsoft46462 жыл бұрын
We have the Valken Surge gel blasters in stock
@b7yn2 жыл бұрын
Can I buy it from you? There’s none in stock anywhere?
@fubarbundyairsoft46462 жыл бұрын
Thanks for the message, best to contact us through Facebook (fubarbundy airsoft) or via email [email protected] to discuss purchase
@CoffeeorDie-qc6yi2 жыл бұрын
1200 xD for a kit
@fubarbundyairsoft46462 жыл бұрын
Lots of engineering gone in to this and it’s on par with the Systema PTW kit by HAO
@fubarbundyairsoft46462 жыл бұрын
Thanks for the commen, this was three years ago we now have a dedicated mic system I place othe built in camera mic.
@mo-s-2 жыл бұрын
Good video :) (btw make your audio a little louder)
@chrismcginty36872 жыл бұрын
Bet that going be expensive steve
@46templar2 жыл бұрын
Well you will make a mint on them as i will be buying one 👍👍👍👍
@46templar2 жыл бұрын
How do i find it on your website bud?
@tfsampaio2 жыл бұрын
All we g17 gen 5 are compatible with co2 magazines?
@fubarbundyairsoft4646 Жыл бұрын
I believe so
@damiankidd39722 жыл бұрын
You say your shop name way to quick, hence I've ordered from elsewhere, as I couldn't find your website, Shame, excellent video really informative and the holder is and cool addition
@fubarbundyairsoft46462 жыл бұрын
Thanks for comments, glad you liked it and found the video useful. I would have thought the channel name, the intro and exit logo would have been enough in addition with saying the shop name in video. If you can’t find us are website is www.Fubarbundy.co.uk
@user-jz9wd7ep2v2 жыл бұрын
is it heavy enough
@nrmic28372 жыл бұрын
Very sought after replica now. You’re lucky to have one
@anthonymccarthy73732 жыл бұрын
How much for something like already custom built and painted ?
@fubarbundyairsoft46462 жыл бұрын
Something* like this instagram.com/p/B3hd7XFn49-/?
@Cons29112 жыл бұрын
I want one bad, just bought a cheaper m4 but I’m willing to spend for this. I want the longer version ,maybe make it a smr or something. Cab is nice but my other m4 is already on the short side
@dandetande2882 жыл бұрын
This video is so fake, more fake than made in China stuff
@fubarbundyairsoft46462 жыл бұрын
The test of the impact grenade on soft ground was real, it was loaded with a live charge and thrown as it would be in game. Struggling to see how you believe it is a fake video, unless you think we are really good at CGI?
@markpeters25083 жыл бұрын
How much joule is the gun?
@spiritualawakenings62513 жыл бұрын
Try loading them mine works every time.
@DM436853 жыл бұрын
Wish Id seen this before I spent £100 on a Dynatex 6209, that FAILED to go off on three occasions, today, after bigger throws than this guys did.... waste of money on Woodland / airsoft areas
@justiningle88843 жыл бұрын
We got 410 max on .28 and a 365 average, have not had any .20’s to shoot it but that’s an xcortex Crono unit?
@alanlegg61103 жыл бұрын
good video but how do you prime it !
@EfftupSmith2 ай бұрын
I know this is 3 years old but i thouight I'd answer in case anyone else was wondering. You put primers in the bit that rotates. After that, it will go off if the top part moves enough to make the firing pin go into the hole (i.e hitting on a hard surface) . On the Quake 8 there is a safety position where the firing pin can't impact a primer. On the 6209, that safety "pin" stops the top part from moving. It's primed as soon as you take that pin out.
@DM436853 жыл бұрын
Good video, and I agree the next upgrade to this grenade would be a marker system on the bottom between the 209 spindle and body, to show you what 209 has been fired... 1 - 6
@paulmiddlemass64653 жыл бұрын
I agree, probably mark an arrow on the base, and then number indicators on the primer housing
@Tberg763 жыл бұрын
I just got one, it was sitting on 160fps outta the box on a 9.9V Life. Hop up was way too tight, adjusted it to the fastest I could get, and it's on 250fps. Cleaned the barrel, 260fps. But, I can not get it any higher. 11.1 Lipo gave only 5fps more. Any ideas what could be holding up ~80fps? Thanks
@hikira26492 жыл бұрын
If you are in the UK VFC ships these guns with a weaker spring due to regulations. This seems about on par with the FPS of one of them.
@joshuastimmel2 жыл бұрын
where are you from and why is the fps so low.
@froggy_boy_kermuttt413 жыл бұрын
Can you add an orange tip?
@popnchicken3202 жыл бұрын
Yes! on kyairsoft you will find a WE orange tip piece that fits all we pistols, including this one.
Пікірлер
Is there anywhere i can buy them from i really want a vfc bcm gbbr really bad i like yhe 11.5 but cant find them anywhere any ideas or do you still have the current one an wanna sell it ?
Hi Dustin we may be able to help please send an email to [email protected]
the cut out of front of grip to grab mag is ugly asf, why is it even needed? My mags literally drop out when the release is slightly touched, don't even need to touch the mag...
The real G17 has the cut in the grip as it’s a vital if you have a stuck mag in the grip.
I've just ordered an WE G17F Gen5, Which is the french edition, I wanted this so it doesn't have the cut out. The Umarex 17 gen5 french has the cut out, but the real one doesn't? so the umarex one is not using the proper version.@@fubarbundyairsoft4646
Nice to see a mature adult making an airsoft video. Getting tired of 20 somethings c-clamping to generic guitar music.
I don't understand how you moved from a 14” barrel to a shorter one. This literally looks like the CQB after your changes. Does the Angry ris kit includes a shorter barrel? Thanks for this review. wow that stock has ton of extra storage. Angry gun L1192 Rail Magpul ACS (modified for 1300 pq battery) Acog FMA Pq AFG model 1 (grip) Surefire flash hider Nice. Maybe it's better to buy the skeleton at this point? Or just go for the PTW... but maybe PTW is an older technology compared to GBLS?
where can I get the case?
I was wondering if you got a chance to shoot to yourself, how far are you able to shoot out on yours?
I wish VFC would come out with a better stock for these Avalon guns. The QRS stuff is mediocre all around. The stock was the first thing I upgraded when I bought my VFC Avalon Calibur CQC back in 2018.
Beautiful! Does Archwick sell the shorter upper too? Rather than two full systems
I have a hard time filling my mags
the grenade lug on the original had the same securing screw
kzread.info/dash/bejne/Z3asqLOPl5fOmMo.html
Video of Korean range test
Great video and love the rif.
Looks sweet.
Hello sir we are maker of AEGIS FMG-9! Thank you for making review of our product :) I sent email please check ^^
Hello Aegis, would like to know if you are still sending out the modified pins with e clips that were falling out (as shown by AirSix's video).Is it also possible to order more magazine baseplates? Thanks!
Wish I could find a place that ships this to the US
Same 😭
This would be a bit difficult due to rights owned by Magpul, a US company and they’ve also licensed this for sale by PTS.
@@jeff_chan Evike was selling them just recently.
@@pspmaster510 I saw this too. But it’s also labelled as Laylax, a company that seems to own some licensing rights like Umarex. Maybe they got that sorted out.
@Jeff Chan Most likely magpul doesn't care enough about a 10 year old unreleased product. Laylax probably doesn't have a license but rather distribution rights.
ignore all the hate! great video thank you!
What did it say the rate of fire was?
Funny I got mine and I’m not seeing a metal badge anyway. Fuckers at the store must’ve taken it out the box
They should make conversion kits for the Dutch rifles
C tech should make a long version
How do you adjust the gas flow good sir? Trying to figure that out
There is an adjustable nozzle (floating valve) inside the loading nozzle it requires small adjustments with an Allen key (think it’s 1.5mm)
That's more of a compensator
What is the muzzle device if you have any link for i it I’d like to buy it
No sorry it just comes with the BCM
When you can let me know how to order some and I will… was trying to order 10
Sold out of our first batch second is due in 4 weeks
@@fubarbundyairsoft4646 where can I message you to try and order some when you get more in
@@OlRunnyEggs [email protected] or on Facebook fubarbundy airsoft
Do you ship to the US?
Magazines yes we can
@@fubarbundyairsoft4646 how can I go about ordering them.. I’ve been looking for these mags everywhere so it would be greatly appreciated
We have the Valken Surge in stock
Do you guys do gel blasters.?
We have the Valken Surge gel blasters in stock
Can I buy it from you? There’s none in stock anywhere?
Thanks for the message, best to contact us through Facebook (fubarbundy airsoft) or via email [email protected] to discuss purchase
1200 xD for a kit
Lots of engineering gone in to this and it’s on par with the Systema PTW kit by HAO
Thanks for the commen, this was three years ago we now have a dedicated mic system I place othe built in camera mic.
Good video :) (btw make your audio a little louder)
Bet that going be expensive steve
Well you will make a mint on them as i will be buying one 👍👍👍👍
How do i find it on your website bud?
All we g17 gen 5 are compatible with co2 magazines?
I believe so
You say your shop name way to quick, hence I've ordered from elsewhere, as I couldn't find your website, Shame, excellent video really informative and the holder is and cool addition
Thanks for comments, glad you liked it and found the video useful. I would have thought the channel name, the intro and exit logo would have been enough in addition with saying the shop name in video. If you can’t find us are website is www.Fubarbundy.co.uk
is it heavy enough
Very sought after replica now. You’re lucky to have one
How much for something like already custom built and painted ?
Something* like this instagram.com/p/B3hd7XFn49-/?
I want one bad, just bought a cheaper m4 but I’m willing to spend for this. I want the longer version ,maybe make it a smr or something. Cab is nice but my other m4 is already on the short side
This video is so fake, more fake than made in China stuff
The test of the impact grenade on soft ground was real, it was loaded with a live charge and thrown as it would be in game. Struggling to see how you believe it is a fake video, unless you think we are really good at CGI?
How much joule is the gun?
Try loading them mine works every time.
Wish Id seen this before I spent £100 on a Dynatex 6209, that FAILED to go off on three occasions, today, after bigger throws than this guys did.... waste of money on Woodland / airsoft areas
We got 410 max on .28 and a 365 average, have not had any .20’s to shoot it but that’s an xcortex Crono unit?
good video but how do you prime it !
I know this is 3 years old but i thouight I'd answer in case anyone else was wondering. You put primers in the bit that rotates. After that, it will go off if the top part moves enough to make the firing pin go into the hole (i.e hitting on a hard surface) . On the Quake 8 there is a safety position where the firing pin can't impact a primer. On the 6209, that safety "pin" stops the top part from moving. It's primed as soon as you take that pin out.
Good video, and I agree the next upgrade to this grenade would be a marker system on the bottom between the 209 spindle and body, to show you what 209 has been fired... 1 - 6
I agree, probably mark an arrow on the base, and then number indicators on the primer housing
I just got one, it was sitting on 160fps outta the box on a 9.9V Life. Hop up was way too tight, adjusted it to the fastest I could get, and it's on 250fps. Cleaned the barrel, 260fps. But, I can not get it any higher. 11.1 Lipo gave only 5fps more. Any ideas what could be holding up ~80fps? Thanks
If you are in the UK VFC ships these guns with a weaker spring due to regulations. This seems about on par with the FPS of one of them.
where are you from and why is the fps so low.
Can you add an orange tip?
Yes! on kyairsoft you will find a WE orange tip piece that fits all we pistols, including this one.
Large arc. More height
Where can I find this beauty? (Uk/ EU/China..)