dSPACE is a leading global provider of simulation and validation solutions for the development of connected, autonomous, and electrically powered vehicles. Our end-to-end solutions are used primarily by automotive manufacturers and their suppliers to test the software and hardware components of their new vehicles long before a new model is allowed on the road, while other application areas include the commercial vehicle, aerospace, and automation industries.
Welcome to the dSPACE KZread channel, your one-stop shop for a wide range of useful content from dSPACE. Here you will find software and hardware demos, deep dives on our solutions, tutorials, use cases, interviews and much more - in short, information on all topics relevant to dSPACE. Whether you're an engineer, a technology enthusiast, or simply looking to enhance your understanding of our offerings, our KZread channel is here to provide you with the content you are looking for.
www.dspace.com/en/pub/home/imprint.cfm
Пікірлер
thanks
Mathematical model to transfer function to discrete TF to C or matlab code, then code a input function to feed the controller, and you get the output of a software simulation of a real-world model
Is it possible to use without a bridge ?
Thank you for your interest and your inquiry. I can recommend the following article on this topic in our support forum: support.intempora.com/hc/en-us/articles/12992858698396-How-to-use-the-ROS-2-Bridge-with-RTMaps To access the article, please register in the support forum if you have not already done so. If you have any further questions, you can also contact our support team at [email protected].
Is the dSPACE SIL Interface for ROS 2 available?
There are multiple ways to integrate dSPACE HIL and SIL simulation with ROS, e.g. the "dSPACE Interface for ROS". We would be happy to discuss the most suitable option for your use case, just get in touch with us ([email protected]).
Sir, while preparing the system , when I am entering tl_prepare_system, the command window is showing an error unrecognised function. Please let me know how to fix this issue.
Thank you for your question! Unfortunately, this question is too complex to answer adequately in the comments. Please send an e-mail to [email protected]. Our colleagues will gladly help you.
Thank you sir for this video. I want to create an RTMaps diagram that extracts signal values from the “Radar_Target” CAN message which is defined in the CAN database .dbc file and attach a viewer or other diagnostic tool to analyze the radar detections. Can you give me some guidelines how can I proceed and what tools do I need so that I can create functional requirements such as requirement ID, message IDs, signal names, signal values, signal types?
Thank you for your question! Unfortunately, this question is too complex to answer adequately in the comments. Please send an e-mail to [email protected]. Our colleagues will gladly help you!
Hello does microautobox III has termination resistor at the end?
Thank you for your question. The termination restistor can be activated via software: ConfigurationDesk. For more details please contact [email protected]. Our colleagues will gladly help you.
@@dSPACEGroup Thanks for kind reply. We would like to give it a try. Should we require any assistance, we will ensure to reach out to you.
Does VECU supports for Fusa(ISO26262) Swcs also? E.g. ASIL D level?
Whether a V-ECU is suitable for testing functional safety requirements depends on the structure of the V-ECU. SIL is of course generally well suited for testing Functional Safty SWCs and the dSPACE tools are certified for such tests. Unfortunately, this question is too complex to answer in full detail in the comments. Please send an e-mail to mailto:[email protected]. Our colleagues will gladly help you.
I would like to know more about open scenario
Thank you for your interest! Please contact [email protected]. Our colleagues will be happy to help you.
Sie machen schöne sachen.Das ist das Unternehmen,für das ich arbeiten möchte
Thank's for sharing.
Thank's for sharing.
Amazing, Thank you!
total cost for the installation process?
For information on prices, please contact [email protected] Our colleagues will be happy to help you.
This shit stupid, just build trains yah gooffs
Hello Christian Becker, Thanks for the demonstration. I would like to know, if I have a binary file which is compiled by the tasking compiler for tricore architecture (TC397XX) & I want to test that file for the above mentioned target architecture. So is there any supported tool available. Basically I wanted to perform level 1 ECU virtualization.
Hi Sangram A Level 1 V-ECU means, that application C/C++ code is available and can be compiled for the simulator platform, i.e. linux or windows, so that a native and fast simulation is possible for testing. If the code has already been compiled for the target hardware (e.g. TC397XX), an instruction set simulator has to be used, which can be coupled with our SIL environment. In case of further questions, please send an e-mail to mailto:[email protected]. Christian
Hello! Does those programs in python are automatically generated (already pre installed or universal), or do we have to write those codes. Plus, if it is preinstalled, could we edit those py files ? Thanks
The blocks visible in the video are convenient blocks already provided by the tool. AutomationDesk is not programmed in Python, and provides an API for remote control via Python, too If you have further questions on this topic please send an e-mail to [email protected]. Our colleagues will gladly help you.
Impressive!👏👏👏
Do you plan to release another video demonstrating the V-ECU capabilities of SystemDesk using FMI3?
Unfortunately, no video on this topic is planned at the moment. But many thanks for the input. We will gladly consider the suggestion.
Thanks for sharing! Does the SDK support GCC compilers? If yes, do you plan to demonstrate this example with GCC compilers. More specifically, perform development using Eclipse, CMake and GDB - as an alternative to the demonstration shown using Visual Studio.
The V-ECU SDK is compiler- and IDE-independent and can therefore be integrated into Eclipse in conjunction with GCC and GDB. Due to the lack of requests, we do not yet have an example of an Eclipse integration. If you have any further questions, please contact [email protected]. Our colleagues will gladly help you.
Thank you! I will reach out to the dSPACE support for more information.@@dSPACEGroup
How to change Simulink Manual Switch value in Controldesk environment. For example, I want to switch the state of 2 control loops to the desired position and desired speed
The simple answer is that you need to make the relevant variables available in the variable description used on the platform in the ControlDesk experiment. You can then drag the desired parameters to a layout and calibrate the values on the created instrument. If you need assistance with the concrete implementation or have further questions, please send an e-mail to [email protected]. Our colleagues from the dSPACE product support will gladly help you.
Thank you dSPACE
Excellent 👍
Great demo. Thanks
Cool. Thank you for the video
In control desk I opened simulink model but when going online it showing task overrun error in error messages how can I solve this ???? Please tell me
Unfortunately, this question is too complex to answer adequately in the comments. Please send an e-mail to mailto:[email protected]. Our colleagues will be glad to help you.
This is what I wanted to see
0:54
Past 2 years I'm following your youtube channel and modules.. Its very excellent... Thank you keep rocking
Hello Sir. I am wondering if there is a module to scan, configure and start sensors from Rtmap? I am using the Ouster Lidar and it needs to be initiated via OusterStudio before it can be used in Rtmaps. Kindly let me know if there is a way to bypass the usage of OusterStudio. Thanks
Yes, Ouster UDP streams sent from Ouster LIDARs can be decoded with the help of the RTMaps Package rtmaps_ouster.pck. If you have further questions, please refer to [email protected]. Our colleagues will be happy to help you.
great explanation thank you
is this can use to simulate road network ?
Hi thank you for your question. Yes, in the dSPACE Software in the Loop environment you can simulate complex road networks, as well as analytical traffic situations. We also offer to create road networks and parametrizable traffic situations from recorded data. The ASM models also allow to simulate multiple “agents“ (vehicles simulated with full vehicle dynamics and traffic sensors) within the same simulation. This enables our customers to develop cooperative systems like platooning as well as other systems relying on vehicle to vehicle (V2V or V2X) communication. We also have applications where customers integrate traffic simulations. To sum it up: Yes, I think we can help you please do not hesitate to contact us [email protected] to discuss your application in more detail.
great video
SLAM: Simutaneous Localization And Mapping
Well done, Tim!
Thanks for sharing. Very informative. What protocols are supported by RTMaps for V2X?
Thank you for your interest. The European (ETSI), Chinese (YDT 3709) and US (SAE J2735) standards are supported. Over the Air we can offer DSRC and PC-5 V2X communication technology. If you have any further questions, please feel free to contact us at [email protected].
Thanks for great overview. For remote simulation using Docker/Kubernetes, is it possible to synchronize VEOS with local simulation components?
Yes, you can synchronize VEOS with local simulation components. How it can be done depends on your specific use case and what kind of local simulation components. If you have further questions, please refer to [email protected]. Our colleagues will be happy to help you.
Is Ethernet not yet supported on standalone Bus Manager?
The Bus Manager does not support Ethernet. We have the Ethernet Configuration Package for the service-based automotive Ethernet SOME/IP. If you have further questions, please refer to [email protected]. Our colleagues will be happy to help you.
This is so cool!!! thank you for sharing the knowledge
Thx for the introduction. What time does it take, to setup such an simulation system from zero, with an available target device?
Thank you for your interest and your question. A setup for a basic application can be configured within a couple of hours. It depends on how many components you want to integrate in the FPGA design. You can even speed up this process by using our ready to use components available in our XSG libraries. We do provide components for electrical machines simulation, power electronics, positions sensors, IO access and many more. The implementation is done per drag and drop within Matlab Simulink. If you have further questions, please refer to [email protected]. Our colleagues will be happy to help you.
👍👍
Hi, I am curious about starting using ASM, but I haven't figured out how to install ModelDesk on my Matlab. I couldn't find any tutorial or explanation regarding that. Can you please help me out?
Please refer to the following videos that address similar topics: www.dspace.com/en/pub/home/medien/videos/tutorials/video_newlicensing_installatio.cfm www.dspace.com/en/pub/home/medien/videos/tutorials/tvideo_scalexiolabboxgettingst.cfm If you have further questions, please refer to [email protected]. Our colleagues will be happy to help you.