did that adapter just sit on top of the subwoofer and just presses down on it as you tighten the screws?
@ElPinche976 сағат бұрын
Yes! And I used double sided tape as well to hold it down better but once I tightened it down, the speaker felt secured. No issues to this day! I’ve since added an external sub and amp. I kept this one still though
@SpecialEffect8244 күн бұрын
One thing I learned is that you never t
@ricardolopes64476 күн бұрын
How did you do to make the third brake flash center one look cool tho!
@mikefortune92177 күн бұрын
Real or fake?
@raulboisjoli60188 күн бұрын
Mine did not come with netflix
@talhachoudhary61419 күн бұрын
you could have used a thread and attach it to end loop while taking actuator out and then attach the new actuator with the same thread and just pull the other end of the thread in trunk. Just a suggestion I dnt know if its gonna work or not
@swilliams239 күн бұрын
Taking off the rear bumper is so much easier than the front bumper. I’m always about doing things correctly especially for other people 😅
@ElPinche979 күн бұрын
Definitely would’ve been easier haha that’s why I said if you want to do it right just take it off I was just being lazy 😅
@Max_ellis7410 күн бұрын
Did you have any issues with air in your cooling system
@deplorable11312 күн бұрын
PRL uses high quality rubbers and components. If your hose clamps start slipping you are way over tightening. From the looks of the impression on the hose from the clamps…you over tightened the 💩 out of those!!!! Sheeeeeesh Just Sayn…
@deplorable11312 күн бұрын
Pro Tip* when tightening hose clamps…the excess band material after the tightening point starts to turn you are to tight.😎
@ElPinche9712 күн бұрын
Honestly i always over tighten some stuff slightly due to an error on my previous car but I’ve never had any issues on the inlet pipe or anything else that I’ve installed myself it’s all held up fine no leaks or anything
@DreamCtrBuildz13 күн бұрын
Still do sticker?
@ElPinche9712 күн бұрын
Yeah I have hella stickers
@DreamCtrBuildz11 күн бұрын
@@ElPinche97 how much to create my car? lol
@nathanmedina239714 күн бұрын
You had to pair the accord end links? Or just recommend it .
@ElPinche9712 күн бұрын
Just a recommendation you can use your stock ones or upgrade to whiteline ones
@user-pp1lc2yh9w15 күн бұрын
how’d you get the oem spoiler off
@Tiger-vm5pc16 күн бұрын
Paisa ricer buys rep lip. Ccol.
@ElPinche9716 күн бұрын
That’s right hell Yeahh this is literally the best lip I’ve had, it takes a beating better than eBay stuff. thanks for the compliment
@vtou3017 күн бұрын
do u still use the skid-plate underneath?
@ElPinche9717 күн бұрын
Yes that stays on. And this lip helps protect everything under, up until the radiator, even more.
@totljag117 күн бұрын
He’ll ya 🔥
@jubei61217 күн бұрын
Instructions are on their website. PDF.
@stonedone871318 күн бұрын
How sturdy is the product if u take it to a machine carwash place?
@litzymartinez210321 күн бұрын
Dumb questions but how is the removal process of the sequential side markers. I installed the clear one but I want to switch to black 😅 I am I just stuck with the clear
@kerovinvillanueva277621 күн бұрын
did the PRL intake stay their? right i was wondering if i install turbo inlet pipe do i need to take out the intake?
@armandofilippini633023 күн бұрын
Maybe is where you did the wholes because theres others videos without gasps
@Unknownn80527 күн бұрын
Do you adjust the bigger bolt or the small one to get close to 0 camber ?
@sheriffsnore6402Ай бұрын
Love the front lip where did you get it at pa? Link porfa
@secret7aaАй бұрын
Where did you buy the extended studs
@Bbc418Ай бұрын
First thing you gotta do is stop saying hell ya 🤦🏼♂️
@ElPinche97Ай бұрын
That’s my signature
@secret7aaАй бұрын
How much miles does the car have now?
@GeraldValdez14Ай бұрын
how is the quality on the rims? Any bends or cracks since you got them?
@javiersosa8936Ай бұрын
Hello, good, what kind of brakes do you use ahead?
@sarkplexАй бұрын
Si quema cuu
@bobbyherdman243Ай бұрын
Water doesn’t get into the engine bay with the vents on the hood?
@21CodblackopsАй бұрын
I just ordered that same carbon fiber hood for mine. I have a question with the vents in the hood does a lot a rain get into the engine bay with them? And is it bad if so?
@GhogurtАй бұрын
How did you fit the sub in the frame
@ElPinche97Ай бұрын
It goes in at an angle, if you’re scared to scratch the rear window use a towel to cover the speaker so it won’t hit
@GhogurtАй бұрын
@@ElPinche97thanks 👍
@GhogurtАй бұрын
@@ElPinche97I just realized mine didn’t come with the wires
@GhogurtАй бұрын
Can’t seem to figure out how to fit the sub in the hole
@josephlazo2326Ай бұрын
My don’t have netflix🥲
@ElPinche9720 күн бұрын
I think it doesn’t work for KZread anymore I haven’t checked myself but it works for Hondata for me still
@Steven-uy5czАй бұрын
i was looking at videos for white line rmm's i noticed you driving down Ave S LOL !!
@CentralvalleycivicАй бұрын
I dont see anyone talking about turbos going out maybe thats just my issue😭 Lol that fuel cap was makin the most noise when i bought my car i just took a screw and drilled in the little latch that locks the gas door. No more issues. My skid plate and all plastic under body all scraped off at seperate times. So i never put any back.
@krzysztofbeza9802Ай бұрын
Hey, its only for manual trans., or it can be attached to CVT whitout any problems?
@Drobert-jq2whАй бұрын
How did you get the Si logo on the steering wheel?
@Donvlogs95Ай бұрын
Clean Si man well built
@jodirt2k7Ай бұрын
Will the map race exhaust fit on fk7 hatchback?
@Unknownn805Ай бұрын
Did u do the alignment the same day ? Would it be fine if you drove it for a day or two after then took it in for alignment?
@ElPinche97Ай бұрын
I drove it for like a month before getting it aligned haha to let everything settle in plus I had readjusted them a bit more too
@VivianauxitoАй бұрын
A Very informative review, sir. Can we invite you to review our portable air pump as well? We just emailed you for an inquiry
@killswitch269Ай бұрын
Man me and the homies used this video for guidance on my 2020 lx and your shit funny as hell 😂 thankss
@LuisRojas-em8vwАй бұрын
2 days ago I installed that Intel pipe and I got 2 errors in the ktuner someone knows why
@sosa7770Ай бұрын
They stopped making this downpipes ?
@vermontvermont9292Ай бұрын
Where did you get the carbon fiber exterior B pillar covers?
@vermontvermont9292Ай бұрын
I replaced those factory half turn screws with 10mm bolts with built on washers. I removed all the factory speed nuts and used the ones that fit the new bolts. Now I never have to worry about it falling off.
@vermontvermont9292Ай бұрын
I was always a fan of rockford Fosgate back in the day. I had 2 of their 10" punch models way back in 2000 in my 1988 vw gti. It was so much bass it literally blew out my rear hatch glass. I was pissed! Subscribed btw.
@vermontvermont9292Ай бұрын
Where did you get the rear windshield visor ?
@vermontvermont9292Ай бұрын
Except now that I look them up they don't have neo chrome.
@ramboquach1892Ай бұрын
Did you keep the mesh off did it sag a lot? Did your lip fall off?
@ElPinche97Ай бұрын
Yeah I cut the whole mesh out. It sags a bit not a lot though. Depends on the lip you have. My lip has never fallen off. It looks good a chassis mounted splitter would help with the sagging but it doesn’t bother me you can’t really tell
@ramboquach1892Ай бұрын
@@ElPinche97 i got a civic hatchback sport 2021 you think I’ll be good?
Пікірлер
did that adapter just sit on top of the subwoofer and just presses down on it as you tighten the screws?
Yes! And I used double sided tape as well to hold it down better but once I tightened it down, the speaker felt secured. No issues to this day! I’ve since added an external sub and amp. I kept this one still though
One thing I learned is that you never t
How did you do to make the third brake flash center one look cool tho!
Real or fake?
Mine did not come with netflix
you could have used a thread and attach it to end loop while taking actuator out and then attach the new actuator with the same thread and just pull the other end of the thread in trunk. Just a suggestion I dnt know if its gonna work or not
Taking off the rear bumper is so much easier than the front bumper. I’m always about doing things correctly especially for other people 😅
Definitely would’ve been easier haha that’s why I said if you want to do it right just take it off I was just being lazy 😅
Did you have any issues with air in your cooling system
PRL uses high quality rubbers and components. If your hose clamps start slipping you are way over tightening. From the looks of the impression on the hose from the clamps…you over tightened the 💩 out of those!!!! Sheeeeeesh Just Sayn…
Pro Tip* when tightening hose clamps…the excess band material after the tightening point starts to turn you are to tight.😎
Honestly i always over tighten some stuff slightly due to an error on my previous car but I’ve never had any issues on the inlet pipe or anything else that I’ve installed myself it’s all held up fine no leaks or anything
Still do sticker?
Yeah I have hella stickers
@@ElPinche97 how much to create my car? lol
You had to pair the accord end links? Or just recommend it .
Just a recommendation you can use your stock ones or upgrade to whiteline ones
how’d you get the oem spoiler off
Paisa ricer buys rep lip. Ccol.
That’s right hell Yeahh this is literally the best lip I’ve had, it takes a beating better than eBay stuff. thanks for the compliment
do u still use the skid-plate underneath?
Yes that stays on. And this lip helps protect everything under, up until the radiator, even more.
He’ll ya 🔥
Instructions are on their website. PDF.
How sturdy is the product if u take it to a machine carwash place?
Dumb questions but how is the removal process of the sequential side markers. I installed the clear one but I want to switch to black 😅 I am I just stuck with the clear
did the PRL intake stay their? right i was wondering if i install turbo inlet pipe do i need to take out the intake?
Maybe is where you did the wholes because theres others videos without gasps
Do you adjust the bigger bolt or the small one to get close to 0 camber ?
Love the front lip where did you get it at pa? Link porfa
Where did you buy the extended studs
First thing you gotta do is stop saying hell ya 🤦🏼♂️
That’s my signature
How much miles does the car have now?
how is the quality on the rims? Any bends or cracks since you got them?
Hello, good, what kind of brakes do you use ahead?
Si quema cuu
Water doesn’t get into the engine bay with the vents on the hood?
I just ordered that same carbon fiber hood for mine. I have a question with the vents in the hood does a lot a rain get into the engine bay with them? And is it bad if so?
How did you fit the sub in the frame
It goes in at an angle, if you’re scared to scratch the rear window use a towel to cover the speaker so it won’t hit
@@ElPinche97thanks 👍
@@ElPinche97I just realized mine didn’t come with the wires
Can’t seem to figure out how to fit the sub in the hole
My don’t have netflix🥲
I think it doesn’t work for KZread anymore I haven’t checked myself but it works for Hondata for me still
i was looking at videos for white line rmm's i noticed you driving down Ave S LOL !!
I dont see anyone talking about turbos going out maybe thats just my issue😭 Lol that fuel cap was makin the most noise when i bought my car i just took a screw and drilled in the little latch that locks the gas door. No more issues. My skid plate and all plastic under body all scraped off at seperate times. So i never put any back.
Hey, its only for manual trans., or it can be attached to CVT whitout any problems?
How did you get the Si logo on the steering wheel?
Clean Si man well built
Will the map race exhaust fit on fk7 hatchback?
Did u do the alignment the same day ? Would it be fine if you drove it for a day or two after then took it in for alignment?
I drove it for like a month before getting it aligned haha to let everything settle in plus I had readjusted them a bit more too
A Very informative review, sir. Can we invite you to review our portable air pump as well? We just emailed you for an inquiry
Man me and the homies used this video for guidance on my 2020 lx and your shit funny as hell 😂 thankss
2 days ago I installed that Intel pipe and I got 2 errors in the ktuner someone knows why
They stopped making this downpipes ?
Where did you get the carbon fiber exterior B pillar covers?
I replaced those factory half turn screws with 10mm bolts with built on washers. I removed all the factory speed nuts and used the ones that fit the new bolts. Now I never have to worry about it falling off.
I was always a fan of rockford Fosgate back in the day. I had 2 of their 10" punch models way back in 2000 in my 1988 vw gti. It was so much bass it literally blew out my rear hatch glass. I was pissed! Subscribed btw.
Where did you get the rear windshield visor ?
Except now that I look them up they don't have neo chrome.
Did you keep the mesh off did it sag a lot? Did your lip fall off?
Yeah I cut the whole mesh out. It sags a bit not a lot though. Depends on the lip you have. My lip has never fallen off. It looks good a chassis mounted splitter would help with the sagging but it doesn’t bother me you can’t really tell
@@ElPinche97 i got a civic hatchback sport 2021 you think I’ll be good?
@@ramboquach1892 you should be fine!