I'm legitimately about to buy a Red Head from DSP but don't want to pay a shop to change it. This was the first video that popped up, and I'm damn glad it was since it's the same product and basically same truck.
@demerclopez262211 күн бұрын
I was proud until that beer 😢 but good job man
@demerclopez262211 күн бұрын
Dropping that part on your guts or balls i think your done having kids but victory!
@paolomanu903111 күн бұрын
What tool did you use to remove the bottom nut??
@PeterCieply17 күн бұрын
I just tried to do mine and they gave me the wrong booy size...im so beat. So much for the split boot idea.
@johnmcdonald63320 күн бұрын
I just went out and it was unplugged! Your awesome. I still have no bus 99 24valve but at least it turns over. I just bought it broke down. Thanks
@johnmcdonald63320 күн бұрын
Dude great info!! You rule
@georgesutton219121 күн бұрын
How many guitars do you need in your collection? Yes.
@ricknielsen387224 күн бұрын
If anyone don't know how to remove drive shafts. They shouldn't be doing this work
@sebastianpistritto-yp8gy25 күн бұрын
That was a great way the way you described it it was like a b and c thank you my friend I appreciate it you really helped me out
@doughenderson853225 күн бұрын
How close does the inner CV joint come to the dust seal at the center? I’ve done everything to push mine in and it’s still a half inch from seating and it has a little play.
@richardtrammell752125 күн бұрын
Thanks for the info 😊
@wyatt254828 күн бұрын
I was thinking about posting my rendition of hotel Californias solo, and then I saw this video
@oubemxarat.k19664 күн бұрын
Just do it! I want to see 👇 drop link here.
@thrashercentral1792Ай бұрын
Hopefully sue-happy don henley won’t take this down awsome playing👍🏽
@jwlambkajwАй бұрын
Nope.
@KYC_KnowYourCryptoАй бұрын
That Crows-foot wrench tip was exactly what I needed; I CANNOT get that line off my trans. Will be trying this afternoon... thanks J-Bob!
@palaciosfreddy9189Ай бұрын
Damn bro, care to include your cats name too, jesus christ.. just get to the poiny of the video, enough with the chattiness.
@davidchase8170Ай бұрын
Can you sand blast a whole concrete patio with this?
@ranjantyАй бұрын
A couple of years ago I resealed the vacuum pump and swapped out the PS pump on my 99 Ram diesel. The power steering is making a lot of noise and very very hard to turn. My question is how can you tell if it's the power steering gearbox instead of the pump?
@Sage-qd6tfАй бұрын
I’m laying under my truck watching this while staring at engine oil absolutely everywhere. Thanks in advance I hope 😂
@herbertbell9438Ай бұрын
Definitely would be worth replacing those bolts with some normal ones.
@williamlanham8973Ай бұрын
Got a hawk Tuah on it
@m.t.v.7934Ай бұрын
I ended up keeping my tool cart stationary and also added the side shelf and I store my power tools and extra sockets. I have filled the top with chrome and impact 1/4 to 1/2" complete metric and I am trying now to get a complete SAE set. I only have a complete 1/4's SAE right now. I know I prob do not need that all but like most guys I just want them. LOL Thanks for sharing your setup. I just started buying Milwaukee power tools this year and I have bought a lot. I really like the M12 line but I do have 2 M18. If you are going to spend the money on a M12 high speed ratchet, check out the M12 insider ratchet. It is not cheap but it comes with a set of metric sockets, 1/4, 3/8, and a hex anvil and you can buy the 1/2" anvil for $10 so you have all 3 sizes in one ratchet and it is 350 RPM which is 50 RMP slower then the high-speed M12 but it has more power. I recently purchased one I am very very happy with it. I would suggest checking it out.
@TolongalofaАй бұрын
You have to open that valve all the way otherwise the media eats the valve up inside !! So open all the valves to the full pressure!!
@TransistorBasedАй бұрын
The 12 string at the intro needs some Leslie!
@Yed_Tood_Mom_YouАй бұрын
Key ??
@connivingkhajiitАй бұрын
Bad luck with those bolts man, mine came off easy with just a medium wrench. The flange however was nice and fuzed to the transfer case yolk lol...
@rtfclb8Ай бұрын
Great job on the video. Thanks for posting, exactly what I was looking for.
@MrBatman10092 ай бұрын
"The Guitar Army" *Idiocracy*
@EEZYEEEE2 ай бұрын
What did you treat the blasted areas with afterwards to prevent rust?
@user-yy4xq5bv8x2 ай бұрын
Superficial rusty 0k , heavy rust Work ?Wisconsin bad rusty truck
@dorsettwilson6832 ай бұрын
Excellent video
@z1a8882 ай бұрын
Classic's never die...
@boi52752 ай бұрын
sick guitars
@MTNJOHN2 ай бұрын
thanks for the video, gotta finally do this to my truck
@MTNJOHN2 ай бұрын
Thanks for the video
@mikecostic712 ай бұрын
Never took a bed off before your video really helped me thanks for taking the time to make it
@hunterfortner18522 ай бұрын
Is the steering shaft able to slide up and down freely
@carlosenriquefalconsanmigu45892 ай бұрын
3.08 awwwww noo :/
@VictorLopez-uo6eq2 ай бұрын
Este guitarrista clásico toca las 4 guitarras en una sola, es estupendo! kzread.info/dash/bejne/gaiDmMeKkpvak84.html
@syfyjunkie32652 ай бұрын
Too much story telling just show the process
@WS1_AUTOS_N_STUFF3 ай бұрын
You know why dogs lick their balls 🏀 because they can 😂😂😂😂😂
@The_Long_Weekend3 ай бұрын
Why does nobody have the felt washer on the pinion gear? My starter had one…
@RobertGarcia-dv8qd3 ай бұрын
Wondering if this is an easier option for replacing the fuel filter instead of dropping the tank since I don't have a lift and she's full of gas...
@anthonymoreno17003 ай бұрын
I had a mf getting that spacer/extension from the sway bar off the Pitman arm.
@ryanedwards113 ай бұрын
This video was great. Clear and efficient. Thank you.
@randypiedmonte73813 ай бұрын
Surprising that there is no rear support on that transfer case
@jasonsippola1833 ай бұрын
Great video. Love your Dobe! Toby, my Dobe helper, would be under truck assisting me too.
@samadams22243 ай бұрын
Not my issue but subscribed none the less. I have been struggling on my 97 12 valve started off with intermittened fuel shut off solenoid issues. About 30% of the time i have to pull it up manually with a wire i tied to linkage with ignition on. The other day i was helping my brother water trees he planted. left hazzard lights on too long and drained the batteries down. didn't want to crank even with jump. moved batteries around and cleaned everything and it fired up. now the day after i have fully charged batteries and NOTHING. no crank, no click, jack shit. inspected terminals and discovered one was cracked. replaced to no avail. I'm beginning to think starter as it's about 3 years old and last one failed in a very similar way. Never had a starter go quite like the ones in these cummins. You would swear it had to be a switch (I.E. clutch position sensor). Pretty damned odd. Also found an oldssecurity system burries under the dash I never noticed. It's a micro DLR4, I don't know what all it does but I am in the process of getting rid of the damned thing to eliminate it as a possible source of issues. Anyways, good video. Brief, to the point and low on the bullshit. Just the way I like em. Keep up the good work man.
Пікірлер
I love this song so much great video
I'm legitimately about to buy a Red Head from DSP but don't want to pay a shop to change it. This was the first video that popped up, and I'm damn glad it was since it's the same product and basically same truck.
I was proud until that beer 😢 but good job man
Dropping that part on your guts or balls i think your done having kids but victory!
What tool did you use to remove the bottom nut??
I just tried to do mine and they gave me the wrong booy size...im so beat. So much for the split boot idea.
I just went out and it was unplugged! Your awesome. I still have no bus 99 24valve but at least it turns over. I just bought it broke down. Thanks
Dude great info!! You rule
How many guitars do you need in your collection? Yes.
If anyone don't know how to remove drive shafts. They shouldn't be doing this work
That was a great way the way you described it it was like a b and c thank you my friend I appreciate it you really helped me out
How close does the inner CV joint come to the dust seal at the center? I’ve done everything to push mine in and it’s still a half inch from seating and it has a little play.
Thanks for the info 😊
I was thinking about posting my rendition of hotel Californias solo, and then I saw this video
Just do it! I want to see 👇 drop link here.
Hopefully sue-happy don henley won’t take this down awsome playing👍🏽
Nope.
That Crows-foot wrench tip was exactly what I needed; I CANNOT get that line off my trans. Will be trying this afternoon... thanks J-Bob!
Damn bro, care to include your cats name too, jesus christ.. just get to the poiny of the video, enough with the chattiness.
Can you sand blast a whole concrete patio with this?
A couple of years ago I resealed the vacuum pump and swapped out the PS pump on my 99 Ram diesel. The power steering is making a lot of noise and very very hard to turn. My question is how can you tell if it's the power steering gearbox instead of the pump?
I’m laying under my truck watching this while staring at engine oil absolutely everywhere. Thanks in advance I hope 😂
Definitely would be worth replacing those bolts with some normal ones.
Got a hawk Tuah on it
I ended up keeping my tool cart stationary and also added the side shelf and I store my power tools and extra sockets. I have filled the top with chrome and impact 1/4 to 1/2" complete metric and I am trying now to get a complete SAE set. I only have a complete 1/4's SAE right now. I know I prob do not need that all but like most guys I just want them. LOL Thanks for sharing your setup. I just started buying Milwaukee power tools this year and I have bought a lot. I really like the M12 line but I do have 2 M18. If you are going to spend the money on a M12 high speed ratchet, check out the M12 insider ratchet. It is not cheap but it comes with a set of metric sockets, 1/4, 3/8, and a hex anvil and you can buy the 1/2" anvil for $10 so you have all 3 sizes in one ratchet and it is 350 RPM which is 50 RMP slower then the high-speed M12 but it has more power. I recently purchased one I am very very happy with it. I would suggest checking it out.
You have to open that valve all the way otherwise the media eats the valve up inside !! So open all the valves to the full pressure!!
The 12 string at the intro needs some Leslie!
Key ??
Bad luck with those bolts man, mine came off easy with just a medium wrench. The flange however was nice and fuzed to the transfer case yolk lol...
Great job on the video. Thanks for posting, exactly what I was looking for.
"The Guitar Army" *Idiocracy*
What did you treat the blasted areas with afterwards to prevent rust?
Superficial rusty 0k , heavy rust Work ?Wisconsin bad rusty truck
Excellent video
Classic's never die...
sick guitars
thanks for the video, gotta finally do this to my truck
Thanks for the video
Never took a bed off before your video really helped me thanks for taking the time to make it
Is the steering shaft able to slide up and down freely
3.08 awwwww noo :/
Este guitarrista clásico toca las 4 guitarras en una sola, es estupendo! kzread.info/dash/bejne/gaiDmMeKkpvak84.html
Too much story telling just show the process
You know why dogs lick their balls 🏀 because they can 😂😂😂😂😂
Why does nobody have the felt washer on the pinion gear? My starter had one…
Wondering if this is an easier option for replacing the fuel filter instead of dropping the tank since I don't have a lift and she's full of gas...
I had a mf getting that spacer/extension from the sway bar off the Pitman arm.
This video was great. Clear and efficient. Thank you.
Surprising that there is no rear support on that transfer case
Great video. Love your Dobe! Toby, my Dobe helper, would be under truck assisting me too.
Not my issue but subscribed none the less. I have been struggling on my 97 12 valve started off with intermittened fuel shut off solenoid issues. About 30% of the time i have to pull it up manually with a wire i tied to linkage with ignition on. The other day i was helping my brother water trees he planted. left hazzard lights on too long and drained the batteries down. didn't want to crank even with jump. moved batteries around and cleaned everything and it fired up. now the day after i have fully charged batteries and NOTHING. no crank, no click, jack shit. inspected terminals and discovered one was cracked. replaced to no avail. I'm beginning to think starter as it's about 3 years old and last one failed in a very similar way. Never had a starter go quite like the ones in these cummins. You would swear it had to be a switch (I.E. clutch position sensor). Pretty damned odd. Also found an oldssecurity system burries under the dash I never noticed. It's a micro DLR4, I don't know what all it does but I am in the process of getting rid of the damned thing to eliminate it as a possible source of issues. Anyways, good video. Brief, to the point and low on the bullshit. Just the way I like em. Keep up the good work man.