When a diagnosis of Multiple Sclerosis landed on my lap, this channel became a way to leave a legacy while I'm still mobile and able to communicate clearly.
I'm not in this for fame or money, but I do share in the revenue youtube makes from my content.
My original plan was to leave a legacy for both my daughters - for a future time where I'm no longer able to communicate these things to them.
Sometimes a complicated past gets in the way of the present, so one can only plan for the future.
Пікірлер
You're not concerned about demagnetizing your financial cards?
When was the last time you swiped a card? They are however, quite hard to demag.
@@TheAussieRepairGuy true. I tap my phone for the most part.
Mythbusters proved how tolerant cards were to external magnetic field, you need lots of Gauss to corrupt one,
Oh boy i wonder whats better my haswell fujitsu workstation with a xeon e3-1226 or that thing
Not sure, but it was cheap and keeps my kid happy
2:53 hi quick question, you said where the draining holes are and you point to a section where you say water shouldn’t be. What makes you say that? I ask because my husband and I have the domestic rtx 2000 and it was leaking inside so now we’re trying to figure out why and we have water in that section where you point out it shouldn’t have water.
In this case it's designed to drain out the underside of each corner. It's meant to be ibstalked with a gasket that raises it up about an inch, that was not supplied with mine. My issues are a result of incorrect installation.
Momentum is your friend, low should only be used on steep inclines
When you are 6.5 tons, you risk stalling in high range.
Two days ago I cleaned my lx-cs57 avr’s remote… hooleee it was dirty inside! I bought the system from a friend and he is fond of chips and beer! 😂 Hardest part was to open it and closing it back up because the middle round selector has to be seated in a specific way. The volume and other buttons are generally very hard to make contact, but I attribute that to bad designing by Pioneer.
I got myself a flipper zero recently, I'm currently cloning all my remotes for a similar reason.
@@TheAussieRepairGuy I used to have a Logitech multi function remote for all my gear but gave it away. Might be a good idea to get one again. I have so many remotes.
I don’t even use the clutch when I need to shift the manual I drive.
When im not in the 5 ton 6x6, i can do that: kzread.info4tAtXPOvqOc?si=Aqbhknce53QpXvCf
Yeah I agree some vehicles you have to use the clutch for shifting. Much nicer when you can just Rev match :D
Nice hiss? (dumb steve1989MREinfo reference)
Fortunately, nothing old enough to hiss in this.
"Clurch in" "clutch out" in sync with gears..
Do one for heel-and-toe braking
I value the shape of my nose lol.
works for a year or so until the wire work hardens and breaks. Buddy of mine came up with the idea for repairing leather wallets many years ago.
Yeah, hence the phrase "last second". Currently still holding, but was useful long enough to get a replacement - and find my roll of upholstry thread.
Wow, 10/100 and non gbit network in 2024, this is one janky setup!
Lol yeah it's all gigabit now. kzread.info/dash/bejne/Z3uFt7qydLuWY9I.html
What did you use to map your controller?
Info and drivers are here: www.s-config.com/xbcd-original-xbox-controllers-win10/
would be cool to build a wooden stand for that, and inset into the stand, have RGB LED's so that you can individually illuminate one slice at a time, or all at once, kinda sequence through them, then show the whole thing etc (arduino and neopixels make it really easy to make)
Yeah I thought about that, but as I'm gifting it to my neurologist, I didn't want to hand him something that requires power pack or batteries. Given that it's possible to swing a slice out, it's easy to see a layer if needed.
This is a brilliant Idea, and beautifully implemented
How thoughtful :) I think that is unique/neat idea.
Them boots with shorts, bro 😂
I don't do sneakers, and I have MS which is heat sensitive - so the cooler the better. that it's a 6x6 military vehicle, clutch takes 30kg to depress. Perspective dude - other ways of life exist outside your narrow field of view.
Hater
This is the type of comment that an empty head provides.
Do you have to take the belt off to time it I have the same one I can't get the belt off I happy with your video.
yes, remove the tensioner, as shown at 5:27 that will allow the belt to be slack so you can get the timing right.
You could probably dub over the video if you don’t want to deal with noise cancelling. Otherwise very cool project! 🎉
Yeah more work than I have time for at the moment. This channel makes about $100 a month, not enough for me to dedicate too much time to.
I think your neurologist will get a buzz out of that gift. Bloody funny.
have you heard of some of the new findings concerning MS that are incredible? many autopsies were conducted on persons whom died "with" MS and were all found to have in their cerebral spinal fluid, clusters of parasites. and if I remember correctly the people were overwhelmingly raised from children with dogs in the home, which could have been a vector. look into it, I would if I were in that situation.
Had my spinal fluid tested way back in 2009... and to be very frank, I get many people claiming to have the cure for MS every day. about as many people that have cures for cancer. To the point where I feel insulted by the suggestions. My treatment is working.
Oh okay here I thought you got a piece for takeout
That's a great project, brilliant end result! Have you tried shining a laser or a more focused lightbeam through it? Or does it just scatter too much anyways?
Not yet, but I'm a little under the pump with a few things. Trying to schedule a bunch of videos so I can take some time off - meaning I have to double time my videos.
Use dog biscuits, they love then :)
Yeah I know they do, but as I don't have a dog, and tend not to carry them when traveling, it's logistically a bit of a problem for me.
Questions! Firstly, what is the name of the pin on the belt buckle? Mine broke off because it was stepped on :-( The belt buckle means a lot to me. Can I just do the same thing to reattach the pin? OR will it not be strong enough soldering? The material is stainless steel.
Stainless is not something you can solder to, it needs proper welding at much higher temperatures. tin/lead solder will not bond to stainless at all. I'm not sure of the official terminology for the retaining pin I'm afraid.
What is the purpose of double clutching? What is it doing? Been probably 25 to 30 years sence i drove stick. Now that im out of the big city, i miss it.
Allows input and output shafts to match speeds, reducing the need for synchros to spin up the gears. In big boxes like this eith only 4 speeds, there's a big jump between gears. Done right, you don't even feel the stick move between gears. Offroad, it can be essential when hill climbing or descending extreme terrain. See the pinned comment for more
Great video, thanks mate. I’m keen to pick one of these up, to build with Miss 11 for her birthday in a couple of months. She’ll love decorating it, too!
Nicee
Same thing has happened to mine 😅 what did you use as the replacement part? Cheers
A small aliexpress self powered meter. This is the long form: kzread.info/dash/bejne/Yoago7Weh6TFaaQ.html
I want Bovril instead 😭
Sadly I've never had the chance to try it.
Saddest looking sandwich ever
Like I said, starting easy.
He just smiled and gave me a vegimite... Sandwich 😂
did u record this in a prison?😂
Military issue meal trays from 1945. But some agree I should be for using so little vegemite.
@@TheAussieRepairGuy Prison / Military Potato / Potatoe
@@UNcommonSenseAUS yeah my time in the reserves was a lot of "hurry up and wait", and wasn't allowed to do what I want, had to go where I was told - while in secure compounds. Not a lot different.
@@UNcommonSenseAUS By the way, how do you know what prison is like anyway?
Wrong. No butter. & I want that bread black with Vegemite to every edge
Go easy we gotta ease these people inti it
@@TheAussieRepairGuy cone on mate, it's the Anzac way..
@@UNcommonSenseAUS ahh we will win them over. My American wife of 10 years is a convert
"Get yourself some decent bread that doesn’t taste like cake." Pulls out cake
It's a loaf of bread...
@@UNcommonSenseAUS every "bread" that you can scrunch together without it returning to it’s former shape right after is fvckin cake
Drive it as you own it and don’t worry my defender gear box had problems with the synchros as I got it second hand at about 40 thousand kilometres.Flushed parts of the synchros out with gearbox oil change and drove it for thousands of kilometres double shuffling until I traded it in on a ford six cylinder one tonner.
I replaced this today with a LED version. the base and fittings are identical, they just sell the same thing with a LED bulb in it. much better suited to the load capability of the PIR module.
The misinformation in this video is dangerous...
well correct it - and post some links and I'll add it to the description. if you care to make a video of your own, I'll link it.
You have me wondering why you are double clutching a synchro transmission?
Because the synchros are there on sprit only. Like I said at the end, cime drive it somtime, you will see
@@TheAussieRepairGuy yer but surely you only need to double clutch and rev match when you are changing down, not going up through the gears?
@@wobblyplanks try going up a rough hill off road in a 5 ton 6x6...
@@wobblyplanks example of where this is useful: kzread.info/dash/bejne/aXakpptvppSXoJs.html
@@TheAussieRepairGuy if it works for you well fair enough.
Why does it take money from your bank account then tells you have to pay 117$ when the item was 114$ makes no sense all it did was use my money then it’s telling me I have to pay them 117$ left out of 225$ I think I messed up
Can't tell you. I don't use zip pay, I only encounter victims of it
Ooh thanks for the tutorial, I am indeed a yank and I’ve been curious about vegimite. There’s a store near me where I can get it and I’m so tempted.
I married a yank, 10 years on she's a convert lol
Unfortunately common issue is the manifold inlet gaskets in the valley.
Yep this one has had that done. Shortly after this video, the heater tap assembly crumbled to bits as well
Excellent! Id like to do this to a Duratech station so that it’s not completely unbearable to use lol Would you expect the insides to be similar? Or is it hard to say? I’ve only ever bought silicone cable from Jaycar or Altronics, bloody rip off it is 😂
Ryobi aren't doing anything groundbreaking so I'd expect to see something similar yes
Wow, really cool to see the whole process. Very impressive.👍 Sorry to hear the passing of your brother. A nice gesture to make that for your parents.❤
This was for a close friend thst passed less than a year later. He took it to his grave
Awesome tips, including the blu-tac! Thank you.👍🤠🇦🇺⁷³
Yeah I use that stuff for everything, including metal casting
@@TheAussieRepairGuy really, metal casting. Does it not melt?
@@DonzLockz surprisingly not. Here's a 5 year old video, 14:45 you see how I use it: kzread.info/dash/bejne/pmehj6qFcpmehag.htmlsi=kRcGaYi4rzemHjfh
awesome! that switch lite has seen better days
Yeah I replaced the stick entirely last night. Video is still unlisted but you can have a look if you want: kzread.info/dash/bejne/hJetl5OIXZnRirA.html
Granny shifting, not double clutching like you should.
Are you on NDIS? If so you should be able to use some of your funding to get someone to mow your lawn.
4 years and still waiting
Thank you for this video. It may be 3 years old, but it's still very relevant. I just bought a brand new GoPro 8 in 2024, which means the battery could be up to 4 1/2 years old. The battery wouldn't charge, and didn't even register in the camera. Then I found your video. (And watched every minute of it. 😂) The dead battery is now very much alive. I then rejuvenated an old camera battery the same way. Thank you for this excellent video. It's a real money saver.
Yeah I have about a dozen batteries and every now and then I forget about one, and this happens.