Пікірлер

• 
  @simplymentalOG16 күн бұрын

  😎👍

• 
  @bjddogg21 күн бұрын

  Thanks for the info. I like the course you built!

• 
  @NorthSeaRC-ff9yn21 күн бұрын

  Appreciate for your comment!

• 
  @Casitascrawlers25 күн бұрын

  Nice upgrades the metal Injora low speed gears & Injora reverse drive 180 55T motor made a huge difference & Injora metal high clearance links & diff covers plus 1.3 wheels have also made a big difference in performance. I’ve been really enjoying the F150M it’s definitely a lot of fun to wheel around. 👍

• 
  @anmic3590Ай бұрын

  Hi! Quite impressive. I’m looking forward to some upgrades too.Are the side mirrors holding on yours? The left one broke on mine in just one day of crawling.

• 
  @NorthSeaRC-ff9ynАй бұрын

  Thank you for the comment. In regards of the mirrors, my one came already with one Brocken out of the box(the right one). And the left one Brocken soon too, during crawling. They are seems to weak for crawling, but nice scale element for people who use this models as stand or trail rigs

• 
  @anmic3590Ай бұрын

  @@NorthSeaRC-ff9yn Indeed, I think they should have made them from hard rubber or something and then put some chrome on. Too bad! Especially when your son wants it glued every time. :))

• 
  @Rc_Alex_76Ай бұрын

  I like the mb100 good ESC they have a new one that's 80% rev instead of the fifty rev thanks

• 
  @NorthSeaRC-ff9ynАй бұрын

  Thank you, Alex. My one was already underway, when they released updated version. To be honest, I do not have problems with 50% reverse power. It even convenient. But I knew, many people demanded 100% reverse possibility. So the upgraded version with 80% is probably really great

• 
  @Rc_Alex_76Ай бұрын

  @@NorthSeaRC-ff9yn have you ran it on 3s yet it like brushless and I probably will get the upgraded one thanks

• 
  @Danylo.M29 күн бұрын

  @@Rc_Alex_76no, I do not have 3s battery. May be it worth more with 370 motor. For the standard 180, 2s seems to be fully sufficient.

• 
  @Rc_Alex_7629 күн бұрын

  @@Danylo.M yep 2s is fine for what I do I've only tried 3s 2 time's and it was different the slow crawl was better much more torque I'm using the injora purple motor thanks man happy RCing

• 
  @NorthSeaRC-ff9yn29 күн бұрын

  Appreciate, Alex. Now I’m really interested also to try same. I do have purple motor with F150 high trail. Honestly, cannot feel any difference with this way cheaper 53 T motor from Ali…

• 
  @RCScaleAdventures-24Ай бұрын

  You could try bearings instead of low range gears. I’ve done the bearing kit recently ands it’s transformed my defender. Crawls well in stock speed gears now and is fast enough to walk with in trail driving

• 
  @NorthSeaRC-ff9ynАй бұрын

  Thank you for the hint. I was waiting for some parts at that stage, and then switched all to ball bearings a bit later. Yes, it really change a lot

• 
  @MysticRiverRCАй бұрын

  Cool look at how squishy those inserts are. Thanks, new sub!

• 
  @NorthSeaRC-ff9ynАй бұрын

  Appreciate and I also finding your channel great!

• 
  @fyego2 ай бұрын

  Nice video! I want to purchase a Rockvan, it brings bearings or bushings? In case of bushings, would you know where can I get bearings for it?

• 
  @NorthSeaRC-ff9yn2 ай бұрын

  Thank you for asking. Yes, it comes with bushings. I think Asiatees or FairRC are offering bearings for the Evo

• 
  @wheelie6422 ай бұрын

  No music! Great video! If I was bed ridden this would be just what the doctor ordered

• 
  @Danylo.M2 ай бұрын

  Thank you!. Finally, the Spring arrived. So I decided not to overlay the birds singing ;)

• 
  @1500chessie3 ай бұрын

  Have the same motor and gearing. My Trx4m is a beast with all the brass parts. Try the Injora brass skidplate , knuckles, brass steering rod and the 11Kg servo. You get a total different animal of car.

• 
  @NorthSeaRC-ff9yn3 ай бұрын

  Thank you @1500chessie Almost all of the parts you listed are ordered and I’m waiting for them now

• 
  @jessewarner51375 ай бұрын

  What rims and tires

• 
  @NorthSeaRC-ff9yn21 күн бұрын

  It is Injora beadlock wheels and S5 compound 63mm Swamp Stomper tires from Injora too

• 
  @victorbuza6765 ай бұрын

  What weights did you use to add to the bumper and other front areas?

• 
  @troydorame8906 ай бұрын

  I have this vehicle and the fms f j I really like the f j because it is extremely scale. This vehicle is quite excellent. Also even though it does not really have the undercarriage. I do thoroughly enjoy them both❤😊

• 
  @troydorame8906 ай бұрын

  Very nice course my friend😊

• 
  @NorthSeaRC-ff9yn21 күн бұрын

  Thank you 👍

• 
  @amvbochok6 ай бұрын

  Hi. Pretty nice and sick FJ / trailer combination. May I ask how did you install the hitch receiver to the FJ and where did you get it? Thanks in advance.

• 
  @troydorame8906 ай бұрын

  What length are shocks.

• 
  @troydorame8906 ай бұрын

  What length are shocks.

• 
  @tikochavsd7 ай бұрын

  received my land cruiser last year Christmas ,use maybe 3 or 4 times in side home , on floor , today i try to used only the lights on and steering wheel work not traction . no moved, full charge battery ,nothing some body know what the problem,tks guys.

• 
  @oxi737 ай бұрын

  J'ai mis aussi les pignons long metal mais avec le moteurs d'origine et les underdrive 24/10 derrière et 22/10 devant.

• 
  @Elisplushies360woodierc7 ай бұрын

  I tried the injora purple 48t and red 54t motor with crawler gears. I went back to the stock motor with the crawlers gears.Much better control,torque and modulation for rock crawling.

• 
  @CustomRcGarage7 ай бұрын

  Cool crawler course 👍

• 
  @NorthSeaRC-ff9yn3 ай бұрын

  Thank you

• 
  @paulgugliotti94467 ай бұрын

  What length are shocks. INJORA makes some 45mm for FCX18

• 
  @CamelTrophy-HK8 ай бұрын

  👍👍👍👍👍

• 
  @Frumsl848 ай бұрын

  How good is it out of the box ? This or the Normal on ?

• 
  @NorthSeaRC-ff9yn8 ай бұрын

  Thank you for the comment. To be honest I not got the question 😊 Do you mean, compare to Defender and Bronco body? If so, I did not experienced yet ordinary, non High Trail version. For sure, center of gravity is higher, so some mods definitely needed to make it really crawling capable. But still, surprisingly good even stock

• 
  @Frumsl848 ай бұрын

  @@NorthSeaRC-ff9yn thank you. Sorry im from Germany. This helps me.

• 
  @NorthSeaRC-ff9yn8 ай бұрын

  @@Frumsl84 Danke für Ihre Antwort :)

• 
  @Nordlicht058 ай бұрын

  oh den MAN habe ich verpasst. Konnte leider nicht früher.

• 
  @barryfurlong99989 ай бұрын

  ❤

• 
  @kiko_meeko10 ай бұрын

  It looks and runs great! What oil filled shocks did you use? And where did you get the tires and weights?

• 
  @ezeNdog10 ай бұрын

  That's awesome... Lol I don't know why but it's funny as hell when it falls @5:10 ... It is honestly a great video though

• 
  @Danylo.M10 ай бұрын

  Thank you very much for your comment : ) Glad to read

• 
  @aeroelastic673610 ай бұрын

  Great video!! Was the video real speed? Or slowed down? Did you change the drivetrain, like motor or esc, the low speed is good..

• 
  @Danylo.M10 ай бұрын

  Thank you, for the comment. The video speed is normal(1:1) ration. I decided not to slow it down in order to see to which extend body bounce reduced with new shocks. I also still use original motor/drivetrain. This is also stock V3 version of ESC/Controller(silent one), and it really performs close to K5 Blazer ESC

• 
  @petrsuchanek810811 ай бұрын

  Nice ride! Those wheels - do they have any offset? Can you share a link with specs.? How did you adapt the shocks? I think they have smaller holes for thinner screws (SCX24), right?

• 
  @Danylo.M11 ай бұрын

  Hi, Petr. Yes, you are right. Those shocks are primary for SCX24 and I had to drill a bit the holes to make them more wide. Then, I used original ball bolt for the lower link and used it to connect upper part of the shock. In the same time, lower part of the shock was connected bystandard upper normal bolt. The reason to do so, is that supplied bolts are smaller in diameter as they are for SCX24 as you mentioned. In regards of the wheels, yes, there shall be offset adjustable. The full name of the wheel is: INJORA 1.0 RC Beadlock Rim Deep Disc Negative Offset 3.15mm Wheel for SCX24 Gladiator Bronco C10 JLU Deadbolt Axial 1/24 Track W1005 Hope this will be of help

• 
  @therealmccoy3311 ай бұрын

  Great video!! Love your build on the LC80. Looks awesome! Great music accompanying the video too 👍👍

• 
  @Danylo.M11 ай бұрын

  Thank you very much!

• 
  @ka4172 Жыл бұрын

  Topp Gewichtsverteilung!

• 
  @Danylo.M Жыл бұрын

  Danke für deinen Kommentar. Ich würde mir immer noch wünschen, etwas mehr Gewicht in den vorderen unteren Teil zu bringen, aber das allgemeine Gewicht hält mich davon ab. Wenn das Auto herunterfällt, befürchte ich, dass die Karosserie durch all die zusätzlichen Gewichte, die jetzt angebracht werden, leicht brechen könnte. Und es ist immer noch ein serienmäßiges Lenkservo ...

• 
  @zach3699 Жыл бұрын

  Nice! Shocks and tire size?

• 
  @NorthSeaRC-ff9yn Жыл бұрын

  Thank you. Shocks are "BDX RC 1/24" from Ali... The tires are Injora 56x22mm