Пікірлер

• 
  @Vaeochan13 күн бұрын

  Do you have a video on replacing the rear windshield, my local glass figment centre messed up mine, the brackets on the sides are not lining up properly, about a 1cm raise compared to original

• 
  @jims35514 күн бұрын

  This was a great install. Everything done properly. Not all glass shops follow proper instructions like this video so make sure to go to someone that has a good reputation. Also request manufacturer glass. It is held to much higher quality standards.

• 
  @mattnielsen7639Ай бұрын

  WAIT a fking sawzall?

• 
  @mattnielsen7639Ай бұрын

  That knife thing doesnt scratch the paint?

• 
  @mattnielsen763918 күн бұрын

  I got mine done elsewherw and theh scratched my car in 3 spots 😐

• 
  @brianjones72092 ай бұрын

  I know this video is a couple years old, but I was wondering, how do you keep from having the adhesive material squeeze out and become noticeable around the sides of the windshield? I have had a shop do it twice and both times they have made a mess. Am I being too picky, or should it be clean?

• 
  @moonolyth3 ай бұрын

  Great work man! Ive replaced three my self on older cars, brock one glass...rrr my brother did. Was going to do my wifes Rad4 but to many tools these days!! And there's some skill involved of course...Oh well leave it to the Pros instead. Very interesting to wach any way, Thanks for taking the time, ❤

• 
  @johnbowser3803 ай бұрын

  Amazing video. Thank you .

• 
  @ooscgt3 ай бұрын

  Hi. Nice vid. Do these require calibration after installation? Thanks

• 
  @juniorjay2435 ай бұрын

  Will you make more videos ?

• 
  @user-gm4qq1sg5d5 ай бұрын

  Bro very professional good work, just I want to point out little thing if you gonna add in your video it’s helps a lot for viewers like you have to talk and told about every step which you missed that some places either one very professional work! Thanks

• 
  @DC00967 ай бұрын

  This dude is a beast man! Fast and excellent! ❤

• 
  @obedsautoglassrepair66007 ай бұрын

  Thanks !

• 
  @razeddazed8 ай бұрын

  Finally a video that shows a windshield with the heating cord. Trying to figure out why my replacement windshield has heating elements but does not seem to heat.

• 
  @charzpak71738 ай бұрын

  I got wind noise on mine

• 
  @user-ti3vq8xd2k8 ай бұрын

  Hi I just had the windshield replaced on my toyota kluger 2021 but i noticed that both the top corners the glass is rounded not the normal pointy edge that would sit in the corner. Is that normal if not original glass replaced wouldn’t it leak later on?

• 
  @stefaniemckoy110010 ай бұрын

  What were the black and red cord your unplugged?

• 
  @DC00967 ай бұрын

  They were the old connections for the heated wiper, so they were thrown away. The windshield comes with new ones so there’s no need for them.

• 
  @georgemon738711 ай бұрын

  The molding on each side of windshield looks so easy to snap in. I accidentally pulled the top part out, and I am not able to get it back in. What could be wrong??

• 
  @eljhony702411 ай бұрын

  What are the 2 small parts in the windhsield? One is the camera but the other one?

• 
  @orbikgomez5097 Жыл бұрын

  What's the windshield part number?

• 
  @dslynx Жыл бұрын

  Thanks for the video! I just had my windshield replaced and didn't remember there being a "huge" gap between the glass and the a pillars. Sure enough, there is. I just never inspected the original windshield.

• 
  @chuckcraigs9310 Жыл бұрын

  Good job taking care of this vehicle. I would go to you if I could. Can you tell me why you do the bottom urethane alone on the car but other 3 sides on the glass? Isn't there a risk of leaks this way if bottom doesn't connect to sides well without bubbles? I had someone do mine but they were not as careful. They broke off the clips that go in on either side of that large plastic bag that sits underneath the glass where the wipers attach. The clip on either end is broken off. Is there a way to fix that with something else or is leaving them out ok? Or where can you buy replacements? Also, they were not as careful removing the plastic side panels on each side and it seems they are now not seated in properly. I can see some of the white clips. Is there a way to get more of those white clips? The ones where there was 5 on each side panel. I saw them rip those panels off instead of slowly removing them like you demonstrate. Good job, and keep going. Thanks for the video. I may try to remove panel pieces myself to see if I can repair them or replace them. Is there somewhere you can buy replacements if needed? Thanks!

• 
  @w-iz Жыл бұрын

  Lol moms car broke

• 
  @g.b.5206 Жыл бұрын

  I have a separation due to degeneration of the rubber at the bottom of the glass and makes water getting in the car, What is my solution? new calking or new rubber gasket?

• 
  @China-zf7vx Жыл бұрын

  Brother, what is this tool called?

• 
  @johnbratsveen9985 Жыл бұрын

  Do you have a 2015 video

• 
  @kern25ltd84 Жыл бұрын

  Brill Video! Can I ask how much did it cost to replace the windscreen?

• 
  @cocteau14 Жыл бұрын

  Thanks for posting! My 2019 Honda Civic needs a windshield replacement, so now I know what to expect.

• 
  @rodneyporter3320 Жыл бұрын

  For the tools they using good job. But that cut out tool is so outdated, I was using that in 1986. Uk so far advanced in removal of screens is unbelievable.

• 
  @benben4216 Жыл бұрын

  And what tool is that ? What’s the name of that advanced tool

• 
  @evenbains2914 Жыл бұрын

  Thank you for the information. I am going to start my own business next week. This helps alot.

• 
  @chiefrocka6983 Жыл бұрын

  My 2017 Honda Civic needs this right now

• 
  @xindin265 Жыл бұрын

  How much does this cost?

• 
  @chuckcraigs9310 Жыл бұрын

  In the us, I was just billed $1k for this job

• 
  @johnbowser3803 ай бұрын

  Lol

• 
  @flightsimman69 Жыл бұрын

  Good job! 👍🏻

• 
  @shanealarcon7928 Жыл бұрын

  Is It xle model

• 
  @owenal1594 Жыл бұрын

  This is Pro Auto Glass in missaguga Canada I worked there as installer back in 2019 it's a good place tho

• 
  @lacasadelaselladoras Жыл бұрын

  I think...will never be the same these car. ..dont use the floor as a table

• 
  @ferngarcia9104 Жыл бұрын

  What were those things in the beginning he popped off on top of the windshield wipers screws called?

• 
  @ericschroeder6393 Жыл бұрын

  Cap, Front Wiper Arm (12MM) - Honda (91611-SDA-A00).

• 
  @blessedlife93 Жыл бұрын

  Shoot the bead on the glass!

• 
  @briank10101 Жыл бұрын

  The 2017 Highlander had a large Toyota Safety Sense module on the windshield below the mirror, this must have been a 2016 or earlier Highlander.

• 
  @chimpun1979 Жыл бұрын

  Do you recommend OEM replacement or aftermarket? Any differences in calibration?

• 
  @ae7805 Жыл бұрын

  Awesome

• 
  @karkule59192 жыл бұрын

  They didn't recalibrate the windshield camera..??

• 
  @bijut30352 жыл бұрын

  Patient approach 💐

• 
  @Vanguardcredit2 жыл бұрын

  I was discouraged in the business because of new glass and need to calibrate now windshield replacement business have to know how to calibrate new vehicles

• 
  @DagmarMiranda132 жыл бұрын

  Gracias. Saludos desde Panamá

• 
  @victorgold47352 жыл бұрын

  No paint protection… why?

• 
  @obedsautoglassrepair66002 жыл бұрын

  Fast forward to 14:00

• 
  @victorgold47352 жыл бұрын

  @@obedsautoglassrepair6600 so? The paint protection before getting old one off

• 
  @obedsautoglassrepair66002 жыл бұрын

  @@victorgold4735 what paint protection are you talking about ?

• 
  @evansbequine21462 жыл бұрын

  Hi bro am Evans for Ghana 🇬🇭 am also into this work I mean this is what I do in Ghana 🇬🇭 good good job 👍

• 
  @perfecttouchautoglass9632 жыл бұрын

  Keep on keeping on

• 
  @user-ro1oi3sm7k2 жыл бұрын

  I work in car windshields. Can I find a job for you? I want to travel to the United States of America. Please reply

• 
  @joeking59172 жыл бұрын

  What is the name of the part he’s taking out at 3:00? I got my windshield replaced yesterday and I noticed there’s a giant tear on the side of it

• 
  @ericschroeder6393 Жыл бұрын

  Cowl Top Assembly, Front - Honda (74200-TBA-A01).

• 
  @automotiveglassreplacement59222 жыл бұрын

  Nice Video Obed. Thank you for taking your precious time to demonstrate the process and provide tips. Your videos will help many people. Great job! I have liked and Subscribed! thank you! -Joseph

• 
  @obedsautoglassrepair66002 жыл бұрын

  Sure. … Appreciate !

• 
  @theguch90382 жыл бұрын

  Did that windshield have the defrosted lane departure windows?

• 
  @obedsautoglassrepair66002 жыл бұрын

  Yes it did.