I am in the middle of a restore of my 98 TJ. I lined the whole tub with stick on sound deadened, a lot of work but worth it. You did a great job on the carpet, a lot of work. Now I'm onto the paint job, another big job.
@Johndeere605 ай бұрын
You did a remarkable job bring em back
@ShillDozer5 ай бұрын
Oy vey! It looks like a freshly minted shekel.
@bruceseverson89416 ай бұрын
great looking bumper! Gave me some ideas!
@perezan20108 ай бұрын
🔥🔥🔥🔥🔥
@maywest3808 ай бұрын
Nice Job!!
@TheGeem039 ай бұрын
Just came across your build! Excellent! I am actually your Neighbor from up the road with the silver 2 Door JL. There’s nothing like the feeling of accomplishment after tooling on your vehicle! Hopefully I’ll see you out and about. Take care!
@waden404 Жыл бұрын
Enjoyed this. I just started what u have done. Heater core has been leaking, so I removed the carpet. Well, pass side foot pan wasnt as bad as yours. I'll be doing the same process you did. I'm also going to use soundproofing/heat Matt AND then new carpet. Your jeep turned out great!!
@marcinczerwinski9241 Жыл бұрын
grreat job. :)
@beachteesh38 Жыл бұрын
Video could use some naration....
@wg5768 Жыл бұрын
Excellent craftsmanship. I want to see what happens when you disconnect the strut that tilts the bed in order to get more room to work on the engine. None of the bumper companies can answer this question. Also,these cargo beds are attached to the frame with plastic hinges. They will break if you back into something hard.
@rickss69 Жыл бұрын
Completely unnecessary...all you needed to have done was to put some heat on those bolts first to soften the patch loc in the threads. Simple hand ratchet would have removed them.
@IronsharkGaming4747 Жыл бұрын
This is amazing man!
@timdurpos3298 Жыл бұрын
Wow that's awesome I want mine like that
@JesusHernandez-gd2uh Жыл бұрын
Excelente trabajo
@robertthrem3382 Жыл бұрын
Paint won’t stick if you don’t sand first😂
@robertthrem3382 Жыл бұрын
A roller really. That’s what they did to the Jeep I bought omg sand all that orange peel off primer sand and primer base coat then clearcoat and sand the clearcoat with 1000
@robertthrem3382 Жыл бұрын
I never seen a air hammer with a torque bit like that. Sand the stainless and primer will stick
@scatteredparts296 Жыл бұрын
Just amazing, very skilled! can you tell me the black paint you used on the bead rims and the windshield wiper arms?
@jayceeb7396 Жыл бұрын
Thanks . The rims were powder coated at the powder coat shop ( semi gloss). I used tremclad professional spray can on the wiper arms.
@scatteredparts296 Жыл бұрын
@@jayceeb7396 Thank you for passing that along, this thing looks great! is the tremclad what you also used on your door hinges as well? It looks like a flat black?
@jayceeb7396 Жыл бұрын
Rustoleum bed liner on the hinges
@gregorysmith3097 Жыл бұрын
picked up one of these last year. Did you add the lid for the front toolbox? Or was that on it when you got it? Next work I need to do is replace the tires.
@lorihemmes74249 ай бұрын
I got the same gator they come like that some didn't tho.
@lukewalker1116 Жыл бұрын
It's a jeep door is fine!
@brianfisher3991 Жыл бұрын
Nicely done
@hhyperdd Жыл бұрын
Outstanding work, even for a Canadian (jk). Looks really awesome!
@MrMe2850 Жыл бұрын
Amazing job. What’s are the specs on the tires and the radio unit you upgraded to?
@JeepTJWheelin Жыл бұрын
I get many who want to know what is the perfect build. Which is not easy to answer because everyone does different things with their Jeep. But I wanted to share mine since my '05 TJ Rocky Mtn drives and handles absolutely amazing on and off road. Keep in mind, I'm not a rock crawler, I'm an adventurer who takes the family beach wheelin, beach camping, surf fishing, and we hit fun, moderate trails in the fall and winter. Which is why the build is for what's near, nothing was put on this TJ unnecessarily for show. I see too many "spotless Jeeps" with 35's - 37's. As long as you have good off road instincts and common sense, a modest, high quality build will allow you and your family to have a lot of fun! All in, I'm at $25k with my '05 TJ Rocky Mtn. And I can honestly say I'm done, build wise. I might Raptor line it since the TJ has a few rough paint spots and won't ever have to worry about off road pinstriping again. The best part is, this TJ not only keeps up, but just outperforms most of these $40k - $75k JL' s. The '05 TJ has a modest build, yet is extremely capable, durable and affordable. I encourage any Jeeper to search for a rust free TJ 4.0 I6, preferably stock, 3.73's w/ LSD and a Dana 44. And to use my build as a "guide". It was a lot of trial and error but it has been worth it. 2" Old Man Emu coils 32" KO2's or 32" BFG MT's Quadratec Baja alloy rims - perfect backspacing - no rub! Currectlync steering Freedom Off Road front adj track bar M.O.R.E steering box brace JKS quick disconnects Freedom Off Road front lower Adjustable control arms The rest are Fixed Detroit Axles Transfer case drop kit Fox 2.0 Shox Fox steering stabilizer Professional 4x4 shop to do the alignment Since doing this, I have had the best experience with any vehicle I've ever had. One of my favorite mods was added a Banks cat back exhaust giving it a throaty growl, but not obnoxiously loud. Absolutely perfect for the 4.0 I6. Most importantly, be honest with yourself, build your TJ for what you will be using it for. And DO NOT let the aftermarket pushers fool or shame you into thinking you "need" 35" - 42" tires and a 4" - 6" lift to wheel. That's 🦬💩! Like cereal companies saying breakfast is the most important meal of the day, the self serving aftermarket will continue to take advantage of the misinformed. O|||||||O 🇺🇲 Only in a 2 Dr 🇺🇲 '41- '06
@gullcreekstudio1391 Жыл бұрын
This is completely awesome man! Literally amazing
@RobertJohnConrad2 жыл бұрын
Hey buddy great job, what kind of head lights are those, wanna get some for my girls jeep....
@geographyinaction78142 жыл бұрын
Chrome deletion and a GI Joe T....thumbs up.
@geographyinaction78142 жыл бұрын
I've been trying to find a decent TJ, six-cylinder, automatic, as I have a prosthetic leg...tough to find.
@geographyinaction78142 жыл бұрын
Wow! Canadian content and the sounds of an impact, not crap music. This is the first Jeep rebuild I have found that features the sounds of a rebuild, not the sounds of a Liverpool Rave in '94!
@mrh17762 жыл бұрын
good work!! what color is the green?
@HD-Rider2 жыл бұрын
What radio did you use. Thanks nice job by the way.
@jayceeb73962 жыл бұрын
Amazon BOSS Audio Systems Marine Rated Weatherproof MRCP9685A Apple CarPlay Android Auto Multimedia Player - Double Din, 6.75 Inch LCD Touchscreen, Bluetooth, USB Port
@HD-Rider2 жыл бұрын
Thank You Sir.
@68orangecrate262 жыл бұрын
Awesome color😎
@johnjamrowski75052 жыл бұрын
Love your rebuild. I commented on your build before and told I told you I was raptor coating my TJ due that we live in the desert. Want to share a slide show on my finished restoration. Take car. Watch "March 22, 2022" on KZread kzread.info/dash/bejne/m3l9z9iRoMewYcY.html
@oliverthejeep60402 жыл бұрын
What were you rolling on the rust before the bed liner?
@jayceeb73962 жыл бұрын
Rust converter by “rust check”
@tripleseven83612 жыл бұрын
Hey…A fellow New Brunswicker with a Jeep TJ… (From your friend’s accent, it sounds like you’re somewhere North of Moncton)…Mine is a 2006…(I’ve had it since new)… I just came across your video and thought I’d have a look…I’m down in SJ… I’ll be curious to know where you got most of your parts…It’s getting harder to find genuine Mopar parts, some of which I prefer, because they fit better. I did manage to get some Mopar fenders, to replace the two original that have started to rust. I’d also be curious to know where you got the half doors. They’re difficult to find, but look like they’re in good shape!
@jayceeb73962 жыл бұрын
Agree good parts are hard to find. I fell on the doors for sale as they were being advertised got lucky. Haven’t seen any for sale since.
@zeropointenergy15742 жыл бұрын
Good job. Enjoy.
@thedefensecoalition2 жыл бұрын
This man possesses over 40 different skilled trades in this one video... This is what I need to see so I can head down in the garage and start my TJ restoration
@jayceeb73962 жыл бұрын
Thanks
@thedefensecoalition2 жыл бұрын
@@jayceeb7396 I literaly went out yesterday and got the supplies to start my restoration
@tripleseven83612 жыл бұрын
A typical New Brunswick DIYer… Not afraid to tackle any job… Makes me want to do better!
@nfldrider2 жыл бұрын
Great job
@leonardbrendle79022 жыл бұрын
I'm looking for the brake caliper a amt 600 jd ,do you know where I can find some?
@jayceeb73962 жыл бұрын
They are still available at John deere dealer. Very expensive and that’s the reason I built mine from a Honda motorcycle front wheel braking system
@JasonPruitt19802 жыл бұрын
What size wheels and tires did you go with? Nice combo.
@jayceeb73962 жыл бұрын
33” tires 15” rims
@JasonPruitt19802 жыл бұрын
@@jayceeb7396 is it stock or do you have a lift?
@jayceeb73962 жыл бұрын
2 “ frame lift
@johnschmiedel33492 жыл бұрын
Man I just watched your video of the restoration on your TJ awesome job just goes to us older guys don't need any big fancy shop and we get stuff done when we get stuff done and are proud of the work we have done thanks for sharing this
@aarondmtz21782 жыл бұрын
GREAT Restoration my friend! I just bought a '97 TJ and am getting the notion to strip it down to the metal inside and put that rubber coating like you did! what was the product name?
@jayceeb73962 жыл бұрын
Gator guard II
@chrisanddeinnasadventures78572 жыл бұрын
Ugh, that paint job is horrible.
@jayceeb73962 жыл бұрын
Yup..and I love it
@geographyinaction78142 жыл бұрын
It's a Jeep, not an Aston Martin.
@robfair32482 жыл бұрын
Nice work !!! Nice shop also 👍👍👍
@katandnat14972 жыл бұрын
This video had me smiling the whole time😍
@jayceeb73962 жыл бұрын
Thanks…..I think
@danielabdallah21192 жыл бұрын
Well done!!!!!! Excellent work!!! I'm in the process myself with a 2001 TJ Sahara
@robhdez50482 жыл бұрын
Great job! Can you tell me what Dupli Color Vinyl & Fabric paint color # you used as there are various shades of gray? Thanks and the Jeep looks awesome!,
Пікірлер
Nice addition
Does the bed open all the way?
I am in the middle of a restore of my 98 TJ. I lined the whole tub with stick on sound deadened, a lot of work but worth it. You did a great job on the carpet, a lot of work. Now I'm onto the paint job, another big job.
You did a remarkable job bring em back
Oy vey! It looks like a freshly minted shekel.
great looking bumper! Gave me some ideas!
🔥🔥🔥🔥🔥
Nice Job!!
Just came across your build! Excellent! I am actually your Neighbor from up the road with the silver 2 Door JL. There’s nothing like the feeling of accomplishment after tooling on your vehicle! Hopefully I’ll see you out and about. Take care!
Enjoyed this. I just started what u have done. Heater core has been leaking, so I removed the carpet. Well, pass side foot pan wasnt as bad as yours. I'll be doing the same process you did. I'm also going to use soundproofing/heat Matt AND then new carpet. Your jeep turned out great!!
grreat job. :)
Video could use some naration....
Excellent craftsmanship. I want to see what happens when you disconnect the strut that tilts the bed in order to get more room to work on the engine. None of the bumper companies can answer this question. Also,these cargo beds are attached to the frame with plastic hinges. They will break if you back into something hard.
Completely unnecessary...all you needed to have done was to put some heat on those bolts first to soften the patch loc in the threads. Simple hand ratchet would have removed them.
This is amazing man!
Wow that's awesome I want mine like that
Excelente trabajo
Paint won’t stick if you don’t sand first😂
A roller really. That’s what they did to the Jeep I bought omg sand all that orange peel off primer sand and primer base coat then clearcoat and sand the clearcoat with 1000
I never seen a air hammer with a torque bit like that. Sand the stainless and primer will stick
Just amazing, very skilled! can you tell me the black paint you used on the bead rims and the windshield wiper arms?
Thanks . The rims were powder coated at the powder coat shop ( semi gloss). I used tremclad professional spray can on the wiper arms.
@@jayceeb7396 Thank you for passing that along, this thing looks great! is the tremclad what you also used on your door hinges as well? It looks like a flat black?
Rustoleum bed liner on the hinges
picked up one of these last year. Did you add the lid for the front toolbox? Or was that on it when you got it? Next work I need to do is replace the tires.
I got the same gator they come like that some didn't tho.
It's a jeep door is fine!
Nicely done
Outstanding work, even for a Canadian (jk). Looks really awesome!
Amazing job. What’s are the specs on the tires and the radio unit you upgraded to?
I get many who want to know what is the perfect build. Which is not easy to answer because everyone does different things with their Jeep. But I wanted to share mine since my '05 TJ Rocky Mtn drives and handles absolutely amazing on and off road. Keep in mind, I'm not a rock crawler, I'm an adventurer who takes the family beach wheelin, beach camping, surf fishing, and we hit fun, moderate trails in the fall and winter. Which is why the build is for what's near, nothing was put on this TJ unnecessarily for show. I see too many "spotless Jeeps" with 35's - 37's. As long as you have good off road instincts and common sense, a modest, high quality build will allow you and your family to have a lot of fun! All in, I'm at $25k with my '05 TJ Rocky Mtn. And I can honestly say I'm done, build wise. I might Raptor line it since the TJ has a few rough paint spots and won't ever have to worry about off road pinstriping again. The best part is, this TJ not only keeps up, but just outperforms most of these $40k - $75k JL' s. The '05 TJ has a modest build, yet is extremely capable, durable and affordable. I encourage any Jeeper to search for a rust free TJ 4.0 I6, preferably stock, 3.73's w/ LSD and a Dana 44. And to use my build as a "guide". It was a lot of trial and error but it has been worth it. 2" Old Man Emu coils 32" KO2's or 32" BFG MT's Quadratec Baja alloy rims - perfect backspacing - no rub! Currectlync steering Freedom Off Road front adj track bar M.O.R.E steering box brace JKS quick disconnects Freedom Off Road front lower Adjustable control arms The rest are Fixed Detroit Axles Transfer case drop kit Fox 2.0 Shox Fox steering stabilizer Professional 4x4 shop to do the alignment Since doing this, I have had the best experience with any vehicle I've ever had. One of my favorite mods was added a Banks cat back exhaust giving it a throaty growl, but not obnoxiously loud. Absolutely perfect for the 4.0 I6. Most importantly, be honest with yourself, build your TJ for what you will be using it for. And DO NOT let the aftermarket pushers fool or shame you into thinking you "need" 35" - 42" tires and a 4" - 6" lift to wheel. That's 🦬💩! Like cereal companies saying breakfast is the most important meal of the day, the self serving aftermarket will continue to take advantage of the misinformed. O|||||||O 🇺🇲 Only in a 2 Dr 🇺🇲 '41- '06
This is completely awesome man! Literally amazing
Hey buddy great job, what kind of head lights are those, wanna get some for my girls jeep....
Chrome deletion and a GI Joe T....thumbs up.
I've been trying to find a decent TJ, six-cylinder, automatic, as I have a prosthetic leg...tough to find.
Wow! Canadian content and the sounds of an impact, not crap music. This is the first Jeep rebuild I have found that features the sounds of a rebuild, not the sounds of a Liverpool Rave in '94!
good work!! what color is the green?
What radio did you use. Thanks nice job by the way.
Amazon BOSS Audio Systems Marine Rated Weatherproof MRCP9685A Apple CarPlay Android Auto Multimedia Player - Double Din, 6.75 Inch LCD Touchscreen, Bluetooth, USB Port
Thank You Sir.
Awesome color😎
Love your rebuild. I commented on your build before and told I told you I was raptor coating my TJ due that we live in the desert. Want to share a slide show on my finished restoration. Take car. Watch "March 22, 2022" on KZread kzread.info/dash/bejne/m3l9z9iRoMewYcY.html
What were you rolling on the rust before the bed liner?
Rust converter by “rust check”
Hey…A fellow New Brunswicker with a Jeep TJ… (From your friend’s accent, it sounds like you’re somewhere North of Moncton)…Mine is a 2006…(I’ve had it since new)… I just came across your video and thought I’d have a look…I’m down in SJ… I’ll be curious to know where you got most of your parts…It’s getting harder to find genuine Mopar parts, some of which I prefer, because they fit better. I did manage to get some Mopar fenders, to replace the two original that have started to rust. I’d also be curious to know where you got the half doors. They’re difficult to find, but look like they’re in good shape!
Agree good parts are hard to find. I fell on the doors for sale as they were being advertised got lucky. Haven’t seen any for sale since.
Good job. Enjoy.
This man possesses over 40 different skilled trades in this one video... This is what I need to see so I can head down in the garage and start my TJ restoration
Thanks
@@jayceeb7396 I literaly went out yesterday and got the supplies to start my restoration
A typical New Brunswick DIYer… Not afraid to tackle any job… Makes me want to do better!
Great job
I'm looking for the brake caliper a amt 600 jd ,do you know where I can find some?
They are still available at John deere dealer. Very expensive and that’s the reason I built mine from a Honda motorcycle front wheel braking system
What size wheels and tires did you go with? Nice combo.
33” tires 15” rims
@@jayceeb7396 is it stock or do you have a lift?
2 “ frame lift
Man I just watched your video of the restoration on your TJ awesome job just goes to us older guys don't need any big fancy shop and we get stuff done when we get stuff done and are proud of the work we have done thanks for sharing this
GREAT Restoration my friend! I just bought a '97 TJ and am getting the notion to strip it down to the metal inside and put that rubber coating like you did! what was the product name?
Gator guard II
Ugh, that paint job is horrible.
Yup..and I love it
It's a Jeep, not an Aston Martin.
Nice work !!! Nice shop also 👍👍👍
This video had me smiling the whole time😍
Thanks…..I think
Well done!!!!!! Excellent work!!! I'm in the process myself with a 2001 TJ Sahara
Great job! Can you tell me what Dupli Color Vinyl & Fabric paint color # you used as there are various shades of gray? Thanks and the Jeep looks awesome!,