Пікірлер

• 
  @user-iu4pt6yf8tКүн бұрын

  Should the pad stone have been mortered using lime mortar and not sand/cement as the building looks older construction?

• 
  @extendaspace-constructionc82110 сағат бұрын

  For once someone asking a decent question !! The property was built in the 50’s so the cement used then was the sort of material used today.. so the structural engineer wanted today’s practices/materials used.. cheers for pointing it out tho 🤙🤙

• 
  @SW-gu1wyАй бұрын

  Use a thinner plasterboard on the square bit, then just scrim the internal andbpatch up flush to existing plaster. You're welcome 🙏

• 
  @extendaspace-constructionc821Ай бұрын

  Yeah better to use a 9.5mm PB I think mate 🤙

• 
  @zhangmoxiАй бұрын

  Hello, what is the black plastic film? Is it a waterproof film? What is its function? I look forward to your answer.

• 
  @extendaspace-constructionc821Ай бұрын

  Hi, it’s DPC, (Damp proof course) to stop rising damp in to the floor and walls above. 👍

• 
  @seregalyuchinАй бұрын

  Потом в этом месте переламывается кабель

• 
  @kevinclark1992Ай бұрын

  They haven't laid dpc below floor blocks where they go from beam to wall at perimeters of walls. This is a build regs requirement.

• 
  @extendaspace-constructionc821Ай бұрын

  No it’s not Kevin..

• 
  @paul8161Ай бұрын

  I call that a A HOLE REPAIR 🕳 😂.

• 
  @extendaspace-constructionc821Ай бұрын

  😂😂😂 touché

• 
  @paul8161Ай бұрын

  @@extendaspace-constructionc821 🤣🤣

• 
  @xrayz1094Ай бұрын

  And the purpose of that?

• 
  @extendaspace-constructionc821Ай бұрын

  To make wedges for any packing you might need.!

• 
  @xrayz1094Ай бұрын

  @@extendaspace-constructionc821 aha!makes sense thank you for replying

• 
  @extendaspace-constructionc821Ай бұрын

  @@xrayz1094 no problem.. have a nice day 🤙

• 
  @Craigs_AdventuresАй бұрын

  And after the first rain it's a tripping hazard

• 
  @extendaspace-constructionc821Ай бұрын

  Excellent that’s just what we were after…

• 
  @SantamonicadraincoАй бұрын

  Mixed metals = no bueno

• 
  @peterparnell616Ай бұрын

  Mmmmm don’t think so

• 
  @extendaspace-constructionc821Ай бұрын

  I do.!

• 
  @AlthekiddАй бұрын

  Yep pointless

• 
  @extendaspace-constructionc821Ай бұрын

  I know right !! 😂

• 
  @extendaspace-constructionc821Ай бұрын

  I know right 😂

• 
  @timheywood4813Ай бұрын

  I love 3rd world country technologies

• 
  @extendaspace-constructionc821Ай бұрын

  To be fair England is in the 3rd world

• 
  @BamaLam4Ай бұрын

  So instead of using a drawing compas, you just need a drill, screw and a wire with dimensions based on eyeballing... nice.

• 
  @extendaspace-constructionc821Ай бұрын

  Thanks mate for your constructive criticism.. but WTF is a drawing compass ?

• 
  @BamaLam4Ай бұрын

  @extendaspace-constructionc821 How can someone in the trade not know what that is? Where you from? Might be called something different

• 
  @extendaspace-constructionc821Ай бұрын

  @@BamaLam4 well we’ve only just discovered fire where we live so this drawing compass you talk of is state of the art technology bro..

• 
  @BamaLam4Ай бұрын

  @@extendaspace-constructionc821 That's strange because I live in the UK too and we discovered fire quite some time ago.

• 
  @DaveDexterMusicАй бұрын

  that IS pretty useless

• 
  @extendaspace-constructionc821Ай бұрын

  I agree !!

• 
  @familytab191Ай бұрын

  so smart bro 😮😮

• 
  @familytab191Ай бұрын

  how did you do that so cool and smart nice 👍👍👍👍👍👍

• 
  @extendaspace-constructionc821Ай бұрын

  Thanks mate 🤙

• 
  @chumbucket1026Ай бұрын

  Just no! The only hole saw hack is use a hole saw!

• 
  @extendaspace-constructionc821Ай бұрын

  Absolutely!!👍

• 
  @user-kt4ku9bg2i2 ай бұрын

  Expensive way

• 
  @extendaspace-constructionc8212 ай бұрын

  How is it?

• 
  @ggss11762 ай бұрын

  nice work mate

• 
  @extendaspace-constructionc821Ай бұрын

  Cheers mate

• 
  @vitterpup2 ай бұрын

  Tom is a very good trowel, been on several sites with him.

• 
  @extendaspace-constructionc8212 ай бұрын

  Mate he was a good lad.. we miss him dearly x

• 
  @vitterpup2 ай бұрын

  @@extendaspace-constructionc821 dunno where he is these days. Last I knew he was on for Roe

• 
  @extendaspace-constructionc8212 ай бұрын

  @@vitterpup he passed away in march bless him

• 
  @vitterpup2 ай бұрын

  @@extendaspace-constructionc821 oh shit! Terrible that.

• 
  @sebastiancruzsejas53552 ай бұрын

  Yo suelo usar primero estuco para reducir el tiempo de secado en casos como este y luego recien pongo la pasta. Saludos Good job...

• 
  @extendaspace-constructionc8212 ай бұрын

  🤙🤙

• 
  @mitchy59942 ай бұрын

  tape tape tape

• 
  @extendaspace-constructionc8212 ай бұрын

  We would usually but it’s being tiled over 🤙

• 
  @mitchy59942 ай бұрын

  @@extendaspace-constructionc821 Makes sense!

• 
  @MrBez0072 ай бұрын

  Dont mention your a brickie, joiners hate the fact they cant use a trowel but you can use a saw 😂

• 
  @extendaspace-constructionc8212 ай бұрын

  Mate I know.. 😂😂😂😂😂

• 
  @Mohamad-nd9jo2 ай бұрын

  📣📣📣📣ما هو المصدر ؟✋️✋️✋️✋️

• 
  @Nohandleneeded1012 ай бұрын

  Slow down

• 
  @ustas163rus2 ай бұрын

  Сразу видно чудика

• 
  @JuanManuel123ify2 ай бұрын

  Creo que con una broca de corona hubiera quedado perfecto mi querido amigo....

• 
  @tangostalons58072 ай бұрын

  Great idea

• 
  @extendaspace-constructionc8212 ай бұрын

  Thank you! Cheers!

• 
  @wakana19302 ай бұрын

  なんのこっちゃ

• 
  @gavinrogers19682 ай бұрын

  Obviously my understanding of a circle is a bit different.

• 
  @extendaspace-constructionc8212 ай бұрын

  Obviously I’ve seen better circles but it gets you out of trouble if you don’t have a hole saw, but only do this when it’s not seen!

• 
  @Effy21232 ай бұрын

  Are these the new nevasharp chisels?

• 
  @extendaspace-constructionc8212 ай бұрын

  Got it in one.. they cut bricks really well too 😂

• 
  @Jackman85942 ай бұрын

  If your adding a heavy duty plate, use the proper screws as well

• 
  @WhiteQuan2 ай бұрын

  Nice watch bro

• 
  @allforclout20402 ай бұрын

  I could rub those up with my knee

• 
  @Pichconstruction-Site3 ай бұрын

  Good worker construction work ❤

• 
  @andrewmathieson78533 ай бұрын

  This is a recommended method of installing coving. In all my life in the construction industry, i have never seen anyone do this

• 
  @extendaspace-constructionc8213 ай бұрын

  How long you been in the construction industry?? .. a week.. 💁🏻‍♀️

• 
  @andrewmathieson78533 ай бұрын

  @extendaspace-constructionc821 Hi. I'm nearly 60, so have been in the industry for over 40, plus the time I spent working with my dad. I've seen a lot of changes in the industry and a lot of new techniques introduced. I've used a triangle shaped jig to cut the cove, not sure if you have seen this. It was very accurate, whereas a mitre jig use to leave a gap in the middle. Not sure if you know what mean. Hope to see more of your stuff in the future.

• 
  @winterroadspokenword46814 ай бұрын

  Stop playing with it 😅 leave it alone boyyyy. Hit it when it’s curing.

• 
  @extendaspace-constructionc8214 ай бұрын

  Mate I can’t help it.. it’s addictive 😂😂😂

• 
  @baz37364 ай бұрын

  Roof looks like a church pitch… terrible doesn’t match the existing.. if you were a good carpenter you would know that’s a massive no no….. cmon boys stick to buttering bricks 🧱 where you can be rough…. Not building frames tiss tiss

• 
  @extendaspace-constructionc8214 ай бұрын

  Shut up baz you turkey.. it’s the same pitch/angle as the existing roof.. mind your own you 🔔 end

• 
  @danieIlondon4 ай бұрын

  That’s why I need to learn how to do this DIY on my parents house where I live. Look at all those guys on site, getting £150/200 easy. £800 a day labour easy. That’s why loft conversions cost £50,000!!! I want to do it in around £15,000.

• 
  @fritzdrybeam5 ай бұрын

  That's jointing, and it's too wet to joint.

• 
  @christopherkirkkirk3085 ай бұрын

  Looks fantastic, do you not need to prime/score the paint first?

• 
  @LloydTaylor5 ай бұрын

  A buddy of mine used to work with a guy that did a loft conversion in half an hour.

• 
  @RTORC786 ай бұрын

  What’s that UB doing?

• 
  @user-ej4cr9ft7v6 ай бұрын

  Looks great 👍

• 
  @SpaceFlightApparel6 ай бұрын

  nice

• 
  @kevocos6 ай бұрын

  Nice job mate. I'm just wondering if you could have used the masonry type joist hangers cut into the brickwork to support the joist ends instead of cutting all those pockets? I think less cutting would have be required but perhaps you had a reason not to use them.

• 
  @mreverybody11506 ай бұрын

  I hear the Police are looking for those big perps.

• 
  @adamreed45126 ай бұрын

  Judging by those views I would say that’s Ashford…my home town!

• 
  @dalejones13316 ай бұрын

  Hey guys! Im planning a conversion like this myself and just wanted to ask.. i noticed your ridge beem is resting on a timber post going down to the central load bearing wall.. now, in my house my central wall is not directly below my ridge, what will i need to do here?? Thanks

• 
  @blueskies6666 ай бұрын

  It’s literally a cupboard lol. I’ve got a 3 bed bungalow and can’t wait to get it done as I get double the house

• 
  @Potto126 ай бұрын

  Hi, whats the grey adhesive called?