Пікірлер

• 
  @raulaparicio7461Күн бұрын

  Gracias, me ha parecido muy útil en caso de no abrir el portón!

• 
  @Belle133711 күн бұрын

  Jag behöver byta parkeringsbromsmotorn. Måste jag också "återställa" parkeringsbromsen? Finns det något annat utöver det som jag behöver tänka på?

• 
  @freddesgarage11 күн бұрын

  Du kan skruva loss motorn,skruva tillbaka "mekanismen"i oket,tryck tillbaka kolven,på med nya motorn. Jag skulle skruva tillbaka och pressa in kolven på andra sidan åxå för att vara säker på jämn bromsverkan. Sedan pumpa bromsen för att få kolvarna att komma ut,sedan aktivera handbromsen och släpp 2-3 ggr. Hoppas du förstår hur jag menar...jag å förklara 🤭 //Fredde

• 
  @Belle133711 күн бұрын

  @@freddesgarage Tack! Jag förstår precis vad du menar.

• 
  @Belle13374 күн бұрын

  @@freddesgarage En fråga till, bör jag pumpa bromsen och "återställa" parkeringsbromsen med bilen av eller på? Tackar på förhand.

• 
  @freddesgarage4 күн бұрын

  @Belle1337 Jag brukar ha den igång så bromsservon jobbar 👍🏻

• 
  @Snorlena18 күн бұрын

  Försökte mig på samma sak nyss utan verktyg. Drog sönder metallen som den sitter fast i. Lossnade från taket i bakdelen. Behöver skaffa något starkt lim, riva taket och limma fast den igen. 😅

• 
  @freddesgarage17 күн бұрын

  Det lät inte kul 😶 Hoppas det löser sig 😊👍🏻 //Fredde

• 
  @auristshybrid357119 күн бұрын

  Nicely done! You don't necessarily have to loosen the 10mm screw, it works just fine ;-) Greetings from Germany :-)

• 
  @freddesgarage19 күн бұрын

  Ok,thought it made turning the lid/cover more easily,but nice to know that i don't necessarily need to loosen it 😊👍🏻

• 
  @_cloudface_23 күн бұрын

  Third video I've tried looking up how to change old wipers for these ones, wasn't until this video I realised I was doing trying to replace it upside down 🙄

• 
  @freddesgarage23 күн бұрын

  Hi! Hope i understand you the right way🤭 Glad i could help👍🏻😊 Please feel free to support my channel🙏🙏🙏 Like and Subscribe if not already done so 😊

• 
  @guidokreimer962125 күн бұрын

  Boahhh!

• 
  @freddesgarage25 күн бұрын

  Yeah, isn't it really funny....

• 
  @mattiasnoren863226 күн бұрын

  Kämpa på Fredde ☺️👍🏼

• 
  @weedOK29 күн бұрын

  Exactly what I need

• 
  @freddesgarage29 күн бұрын

  Happy i could help 😊

• 
  @aldj279229 күн бұрын

  Why English subtitles,when using non English language.

• 
  @freddesgarage29 күн бұрын

  Hi! Yeah,that was a mistake on my part. I will try and correct that. Thanx for the input! //Fredde

• 
  @paivisundvall4218Ай бұрын

  Your Assistant was 👍👍👍

• 
  @freddesgarageАй бұрын

  Yep,she sure was 👍

• 
  @paivisundvall4218Ай бұрын

  The Snow in the background 😅😅😅

• 
  @freddesgarageАй бұрын

  Yup,can't start the season too soon 🤭😊

• 
  @officecarslz1789Ай бұрын

  Good 🇧🇷

• 
  @freddesgarageАй бұрын

  Thanx man 👍🏻🙏

• 
  @paivisundvall4218Ай бұрын

  😅😅😅😅😂👍👍👍😁

• 
  @greatstory5240Ай бұрын

  Hi, can I change my existing window switch where is only driver side AUTO for another one where is all windows AUTO, will that make all windows AUTO from drivers main control? It should work like this as much as I know the main control is in the switch unit not somewhere in the car, but maybe you know?

• 
  @freddesgarageАй бұрын

  Hi! Aliexpress.com have Main power window switches that are all automatic for all windows 👍🏻 I recently installed one myself and it work great,did not get it on film tough //Fredde

• 
  @marianmateciuc627827 күн бұрын

  @@freddesgarage Hi Fredd, maybe you know what can be the problem , the Power Window Master Control Switch operates just the driver window, the rest of buttons on it (lock,unlock, block, and other 3 door windows) - not working, other 3 windows are operable from their door switch, checked fuses - all good, is it worth buying a new switch or search the problem in other place? Thanks

• 
  @freddesgarage27 күн бұрын

  Hi! I would go to passenger side,remove the switch and unplug it,probing it using a test light then operate the main switch and watch the test light if it.lights up.if not,check the feed wire and ground wire. But since so many aren't working,there could be a seperate ground inside the main switch that has gone bad (could be totally wrong on that cuz i've never had one apart) Hope you understand somewhat how i mean 🤭😶

• 
  @youonlyliveonce5576Ай бұрын

  Great video, thanks! Do I need to do anything different for Auris Hybrid 1.8 2013 excel touring sport ? Cheers

• 
  @freddesgarageАй бұрын

  It should be exactly the same 👍🏻

• 
  @user-ud9dx5lh5qАй бұрын

  Could I get one from the junk yard

• 
  @freddesgarageАй бұрын

  Yes u could.shouldn't necessaraly be something wrong with a caliper from rhe junk yard 👍🏻

• 
  @freddesgarageАй бұрын

  I usally swap out the whole axle but in this case the owner is low on budget. I've done in this way about 100 times on various cars without an issue 👍🏻 not saying that it won:t damage the cv joint tapping on it but it have never happend to me ...yet...

• 
  @baedanbutler5995Ай бұрын

  Better off just taking it off the box and stripping it from the other side cause that outer joint will now go first recently learnt from experience and vw axels on a 1.8t best bet is allways strip it from the other side metal plate first circlip and mark where the bairing is sat because there factory balanced if oem also saves smashing or shoving bairings apart its no good for them

• 
  @ScottRockBrothersАй бұрын

  That’s BRIGHT

• 
  @yasin_ustaАй бұрын

  thank you

• 
  @freddesgarageАй бұрын

  You're very welcome 😊 Please feel free to support my channel by Like and Subscribe🙏🙏 if not already done do 😊

• 
  @sidneymassie3197Ай бұрын

  Keep giving you great insight and keep you around.. yes most high

• 
  @sidneymassie3197Ай бұрын

  Very simple may God continue to bless you and give you great

• 
  @freddesgarageАй бұрын

  That's a nice comment! Bless you too 🙏

• 
  @lorans3082 ай бұрын

  Tack Jag har ingen test knapp i min bil toyota auris 2013 hybrid

• 
  @freddesgarage2 ай бұрын

  Om det inte finns någon knapp bredvid hanskfacket så kolla under ratten ovanför pedalerna, annars återställs lampan via "bilinställningar" i menyn,har inte gjort det själv på en Auris 2013,men det är den info jag får fram👍🏻 Lycka till 😊 //Fredde

• 
  @nicoletapopescu65302 ай бұрын

  With engine cold or warm?? I have 4000km and The level it's right too the max mark. Car it's 258 000 on board

• 
  @freddesgarage2 ай бұрын

  You check the oil level after running the engine 10 min,til it's warm,then wait like 5-10 min so that the oil get back to the sump,then remove dip stick,wipe it clean then check,,add i necessary 👍🏻

• 
  @notFR42 ай бұрын

  Thank you sir, good video, no small talking straight to the point 😊

• 
  @freddesgarage2 ай бұрын

  Yeah,i like it simple too,that's why i try to make it simple for all of you guys 😊 Please feel free to support my channel Like and Subscribe 🙏🙏🙏 if not already done so 😊

• 
  @paivisundvall42182 ай бұрын

  👍👍👍👍👍 nice

• 
  @simonslater72572 ай бұрын

  Thank you very much! I've been wondering how to do this for a while. A really clear and concise video.

• 
  @freddesgarage2 ай бұрын

  Thank u 4 watching 👍🏻😊

• 
  @alexmorgoci88292 ай бұрын

  ❤

• 
  @freddesgarage2 ай бұрын

  Glad that i can help 😊👍🏻

• 
  @johnbower2 ай бұрын

  If you took the tyre off you would have been able to clean the corrosion away from around the inside of the hole which causes the leak

• 
  @freddesgarage2 ай бұрын

  Don't know it you missed it due to all bubbles but the leak came from the valve itself.I replaced two of those center valves and could not get it air tight.. Yes i know that's the best way to go,but say you don't have access to tire shop,or a way to get the tire off or no spare wheel, this could save you!

• 
  @RD-qp3mu2 ай бұрын

  Impoosible to fall out. Somebodys not telling you the truth about the history. Im surprised it didnt need new discs and calipers.

• 
  @freddesgarage2 ай бұрын

  That's what i thought,,it can't just fall out of the caliper.well,rotors will be replaced in near future as well as the caliper 👍🏻

• 
  @N.T_Studios2 ай бұрын

  🤣

• 
  @paivisundvall42183 ай бұрын

  Yes she will

• 
  @nicoletapopescu65303 ай бұрын

  How many km you made??

• 
  @freddesgarage3 ай бұрын

  148976 km

• 
  @nicoletapopescu65303 ай бұрын

  @@freddesgarage i have one from 3 months. It's made în 07.2015. First owner made în Nederland 150.000 km în 3years. And în Romania, Bucharest had 2 owner how made 100.000km. I like The car, it's pleasent to drive

• 
  @freddesgarage3 ай бұрын

  This is the best car i've ever owned 😊 But the 04 Chevy Venture (Transport) in Europe i belive..had better comfort i miss that car 😭

• 
  @ssali110003 ай бұрын

  Hi, can you please tell How to take out Seat. Like just pull up that’s it? Or does it have any clip/button to take the Seat off

• 
  @freddesgarage3 ай бұрын

  Please watch my video...kzread.info/dash/bejne/p42NstaOlZSZd5c.html Please feel free to Subscribe if not already done so 🙏 //Fredde

• 
  @RD-qp3mu3 ай бұрын

  Thanks will try it out. How did you find out about it?

• 
  @freddesgarage3 ай бұрын

  I honestly was just playing around while waiting for my wife to quit work,held a finger on one button and turned the switch and and man did i get nervous when that manu came up 😬then i just for fun tried the other button and another manu appeared.

• 
  @paivisundvall42183 ай бұрын

  I think it is the touch screen that activates.

• 
  @mareckimarekk4 ай бұрын

  Thanks! About to change spark plugs soon as already it has 94k km and according to service documents it shall be replaced every 90k km :)

• 
  @freddesgarage4 ай бұрын

  Well thank you for watching 👍 Please do support me by Like and Subscribe to my channel... if not already done so 🙏 //Fredde

• 
  @mareckimarekk4 ай бұрын

  @@freddesgarage already subscribed :) thanks to Your videos I have changed already rear shocks and oil in my Auris Ts. Cheers!

• 
  @freddesgarage4 ай бұрын

  Great 👍🙏

• 
  @onenikkione4 ай бұрын

  at 3:51 place the filter in a clean container not on the dusty car

• 
  @freddesgarage4 ай бұрын

  Yes of course,thanx for the point 👍

• 
  @qanituslokane4 ай бұрын

  Nicee

• 
  @user-hk6xz1ei8t4 ай бұрын

  Pre tighten bottom shock bolt/nut lower the car/jack up rear axle to "0" position and then fully tighten it 80Nm was for Corolla here should be sth similar

• 
  @freddesgarage4 ай бұрын

  Thanx for good info ,i'm open to learn 👍😊

• 
  @user-fw2md4lg5f4 ай бұрын

  dodgy looking work

• 
  @freddesgarage4 ай бұрын

  What do you mean by dodgy ?? I don't understand 🫣🤔

• 
  @TypicalAsian5174 ай бұрын

  Hi Freddie, Where can i buy the brake fluid bleeder kit, that you were using? Thanks

• 
  @freddesgarage4 ай бұрын

  onealways.com/products/2-in-1-brake-fluid-bleeder-change-hand-held-vacuum-pistol-pump-tester-kit?currency=EUR&variant=44410978959643&Google%20Shopping&stkn=94689a009399&gad_source=1&gclid=Cj0KCQiAxOauBhCaARIsAEbUSQQHlzIHDfVY4rvMAkrnBHPQYuAoYDlqFhDNABTM0kJh0h3bsDEpQ6caAtVuEALw_wcB

• 
  @RD-qp3mu4 ай бұрын

  Can you use a simple bottle trap on brake cylinder and foot pump action? 2 man job?

• 
  @freddesgarage4 ай бұрын

  Yes you can use a bottle with a piece of clear tube,just fill the bottle 1 " from bottom with brake fluid so that no air will be sucked in thrue the tube when releasing the brake pedal,only brake fluid will be drawn back ..,That is a 1 person way to do it also :) Link: kzread.info/dash/bejne/ool7yKmpl8bYcqQ.htmlsi=6ULQTt21ivskSqD9 //

• 
  @Novalie20134 ай бұрын

  😊😊

• 
  @Novalie20134 ай бұрын

  Yes it was 😊

• 
  @Novalie20134 ай бұрын

  Looks good 👍🏻😊

• 
  @freddesgarage4 ай бұрын

  I ate the whole baking sheet myself :)

• 
  @stevehaddad10314 ай бұрын

  Thank u Boss..

• 
  @freddesgarage4 ай бұрын

  Thank you👍 Please do support me and my channel by Like and Subscribe if not already done so 👍😁😊

• 
  @philipe_s25024 ай бұрын

  Hey there, do you by any chance know how to remove the inner tail light assembly? This should be one whole piece going across the whole tailgate. My 2002 V40 has water leaking to the inside and from removing all the inner Panels and also the one at the tailgate I assume the water is getting in somewhere in the inner taillight assembly as there can be a bit of water seen inside the light housing from the outside.

• 
  @freddesgarage4 ай бұрын

  Hi! Not sure that i understand the question 😶 If you mean how to remove that hole panel,sorry i have never had that removed,but look for screws or use a prying tool qnd pry around the hole panel.. If i get the chance i'll look into it and make a video 👍😁

• 
  @philipe_s25024 ай бұрын

  @@freddesgarage Thank you for the answer :) Yes I mean the whole panel for the inner light housings (so the ones on the tailgate). I searched on google but didnt find anything helpful so I figured asking you would be my best chance. I will just try to look for a way to remove it. I think this will be my best option to find the leak and reseal everything there. Still thank you for your response!

• 
  @freddesgarage4 ай бұрын

  Sorry i couldn't help more 😶

• 
  @freddesgarage4 ай бұрын

  Please do support me and my channel by Like and Subscribe 😊😁 if not already done so 😊

• 
  @tamh38364 ай бұрын

  Handy video thanks…I’m doing this job next week. Good to see the method to remove the trim 👍🏻

• 
  @freddesgarage4 ай бұрын

  Thanx for watching 👍 Glad i could help😊

• 
  @misaelrosa844 ай бұрын

  Saludos amigo. Así también se quita para un Toyota Corolla?

• 
  @freddesgarage4 ай бұрын

  Debería ser el mismo enfoque..

• 
  @misaelrosa844 ай бұрын

  @@freddesgarage Greetings friend, is this also how you remove it from a Toyota Corolla?

• 
  @freddesgarage4 ай бұрын

  Hi! From what i understand it should be the same.Gently but firmly pry around the unit,it may take some force it it have never been removed before. //Fredde

• 
  @misaelrosa844 ай бұрын

  @@freddesgarage thanks you

• 
  @freddesgarage4 ай бұрын

  You're welcome 😊👍

• 
  @christopherlynch70184 ай бұрын

  Thank you very much Freddie. My offside rear lamp on 2017 Auris is taking in water; seal must be perished(?) Very helpful, particularly the cautious measures when releasing the electric power lead and the internal 10mm👍👍 Many thanks!

• 
  @freddesgarage4 ай бұрын

  Glad you found my video and that it might have helped 👍😊 Yes,eather rhe seal is broken or there's a tiny crack somewere 🤔 Please do subscribe if not already done so 👍😁🙏