Hello i need bottom mount for insta x4 please make it for air 3
@SergSpaceАй бұрын
This is a condom with high friction. The Pocket 3 doesn't slide in that thing that easily, unless you lubricated this silicon inside. I got this for 11 bucks from ebay and it's hard to return it 'cause returning address is in China. Friction creates pressure on fragile gimbal. You didn't even show when you'd take this off, because after that gimbal with camera way of their parked position. And every time I'd put it on and off I afraid to brake the gimbal.
@joaoluizreque8502Ай бұрын
Link
@rupak912Ай бұрын
Does it work with GoPro media mod ??
@0913110Ай бұрын
osmo pocket 3也需要這要的外掛~!
@alityhАй бұрын
So we are supposed to TRUST 2 small magnets to hold our $500 Camera securely and safely while driving down the road in a 4000 pound vehicle at 50 mph while tethered to the outside window? Make it make sense. No Sir.. I wouldn't trust 2 small magnets to secure my Insta 360 Camera while riding a push scooter..Sorry, not sorry.
@thanhphanvan4329Ай бұрын
Giá bao nhiêu vậy Shop
@DjanFoxАй бұрын
Nice
@eprohodaАй бұрын
Sunnylife. Thanks!what a good ~
@DjanFoxАй бұрын
I love your products, im using some of them on my Travel, hope that i can review some of your products Thank you
@_sk_videosАй бұрын
Please make a seperate filter case for osmo pocket filters. I’m different sizes
@Abu-SuhaibАй бұрын
Unfortunately this is not compatible with the original case
@whatsnottohike2 ай бұрын
The case with the cold shoe to hold a light, does it cover the internal microphone?
@crisrocchi27222 ай бұрын
Since the power is exposed , does the gimbal try to move with the cover on if turned on by mistake? Isn't it in danger of breaking down? Would have been sufficient to extend the coverage to the red button
@whatsnottohike2 ай бұрын
Can you link to this? I can't see it on your website. Thanks!
@F4FIGHT642 ай бұрын
Bro How much This Drone❤❤
@IslandCreek2 ай бұрын
I watch this video when I am sad, thank you for the beautiful content.
@itsjorgieeSF3 ай бұрын
Does the charging port also work with the microphone adapter
@skygamingchannelmks4 ай бұрын
test sound
@bogman1924 ай бұрын
coming today - will leave a line with what I think.
@emier4 ай бұрын
Please make this better version with better locking system
@lillyinthefield27874 ай бұрын
wheres the link to buy ???
@PiuPassioneCheRagione4 ай бұрын
orribile...
@homemaranhaTech4 ай бұрын
Best Avata bag case
@printcruz5 ай бұрын
Will this work with an iPhone?
@Alpha-uk6ks5 ай бұрын
I would also want a lens protection while filming, if you damage the lens then you have to buy a new osmo pocket 3.
@kristianoleme5 ай бұрын
I would love to try this!
@robinpaul-vr7wj5 ай бұрын
Dji rs3 mini Gimble carrying case available?
@jimgunderson64395 ай бұрын
What are some of the reasons people would put another camera on their drone like this?
@alaskamagic82506 ай бұрын
Will this sun hood fit and work with a silicone sleeve on my dji rc
@Gerbbo16 ай бұрын
It’s over priced and flimsy!!!!
@crumpetsbuttered6 ай бұрын
I can see this is sold for £8 on Amazon. Is it really that bad or worth the money?
@tadjiashi4 ай бұрын
@@crumpetsbuttered i think that if it was made of something other than just plastic then it'd be great but to be honest it's fine as it is. unless you don't know how to take care of your things and expect your device to be thrown around by toddlers then it might not be the right choice lol. but again it does what it's supposed to just fine!
@mlbpropertygroup6 ай бұрын
How can I get one??
@Moes_Prep_and_Tech6 ай бұрын
the name is different on the amazon page but it has the same video as this one on youtube on that page,no reviews on it yet though
@Richard_John6 ай бұрын
Please make video on 4pcs ND/PL Filters Set: ND8/PL+ND16/PL+ND32/PL+ND64/PL
@AntzMr6 ай бұрын
can this case make the pocket 3 stand without the tripod mount?
@Monty_NSW6 ай бұрын
BUY HOW?
@Alakazam20477 ай бұрын
Can this fit the Pocket 3 with a ND filter attached?
@youtubekangmaskoko7 ай бұрын
Drone light support for dji mini 3 non pro ?? Any review ?
@bourdon8457 ай бұрын
Cool
@ferastrips7 ай бұрын
I bought this case 2 days ago, I like it really :D
@michaelc39777 ай бұрын
Thanks. I was considering buying this stand to display my new mini 2 se. Looks good, but it's much safer storing it in the case I've ordered.
@2RTVE8 ай бұрын
silent hill 2
@otszzz798 ай бұрын
Looks nice, but the magnets of the hood ain't no good for the controller
@vandantandel72899 ай бұрын
Just land and take off from your hand but the gimbal hood is very much advisable
@andrewbaerm.d.39849 ай бұрын
When attached does the controller still fit in the soft case?
@jakubsiemaszko76486 ай бұрын
I'm wondering about same thing, have you tested it?
@gemwebb4 ай бұрын
I just made a short on this exact thing!
@carlospedrosadearaujo841410 ай бұрын
How many centimeters does the extender open??? Quantos centímetros o extensor abre???
@rainbowrunner113610 ай бұрын
Where can we buy these? I need for my goggles v2? Do you have it?
Пікірлер
Looks good, what material is it made of?
Hello i need bottom mount for insta x4 please make it for air 3
This is a condom with high friction. The Pocket 3 doesn't slide in that thing that easily, unless you lubricated this silicon inside. I got this for 11 bucks from ebay and it's hard to return it 'cause returning address is in China. Friction creates pressure on fragile gimbal. You didn't even show when you'd take this off, because after that gimbal with camera way of their parked position. And every time I'd put it on and off I afraid to brake the gimbal.
Link
Does it work with GoPro media mod ??
osmo pocket 3也需要這要的外掛~!
So we are supposed to TRUST 2 small magnets to hold our $500 Camera securely and safely while driving down the road in a 4000 pound vehicle at 50 mph while tethered to the outside window? Make it make sense. No Sir.. I wouldn't trust 2 small magnets to secure my Insta 360 Camera while riding a push scooter..Sorry, not sorry.
Giá bao nhiêu vậy Shop
Nice
Sunnylife. Thanks!what a good ~
I love your products, im using some of them on my Travel, hope that i can review some of your products Thank you
Please make a seperate filter case for osmo pocket filters. I’m different sizes
Unfortunately this is not compatible with the original case
The case with the cold shoe to hold a light, does it cover the internal microphone?
Since the power is exposed , does the gimbal try to move with the cover on if turned on by mistake? Isn't it in danger of breaking down? Would have been sufficient to extend the coverage to the red button
Can you link to this? I can't see it on your website. Thanks!
Bro How much This Drone❤❤
I watch this video when I am sad, thank you for the beautiful content.
Does the charging port also work with the microphone adapter
test sound
coming today - will leave a line with what I think.
Please make this better version with better locking system
wheres the link to buy ???
orribile...
Best Avata bag case
Will this work with an iPhone?
I would also want a lens protection while filming, if you damage the lens then you have to buy a new osmo pocket 3.
I would love to try this!
Dji rs3 mini Gimble carrying case available?
What are some of the reasons people would put another camera on their drone like this?
Will this sun hood fit and work with a silicone sleeve on my dji rc
It’s over priced and flimsy!!!!
I can see this is sold for £8 on Amazon. Is it really that bad or worth the money?
@@crumpetsbuttered i think that if it was made of something other than just plastic then it'd be great but to be honest it's fine as it is. unless you don't know how to take care of your things and expect your device to be thrown around by toddlers then it might not be the right choice lol. but again it does what it's supposed to just fine!
How can I get one??
the name is different on the amazon page but it has the same video as this one on youtube on that page,no reviews on it yet though
Please make video on 4pcs ND/PL Filters Set: ND8/PL+ND16/PL+ND32/PL+ND64/PL
can this case make the pocket 3 stand without the tripod mount?
BUY HOW?
Can this fit the Pocket 3 with a ND filter attached?
Drone light support for dji mini 3 non pro ?? Any review ?
Cool
I bought this case 2 days ago, I like it really :D
Thanks. I was considering buying this stand to display my new mini 2 se. Looks good, but it's much safer storing it in the case I've ordered.
silent hill 2
Looks nice, but the magnets of the hood ain't no good for the controller
Just land and take off from your hand but the gimbal hood is very much advisable
When attached does the controller still fit in the soft case?
I'm wondering about same thing, have you tested it?
I just made a short on this exact thing!
How many centimeters does the extender open??? Quantos centímetros o extensor abre???
Where can we buy these? I need for my goggles v2? Do you have it?
"Promosm" 😒
How do I purchase this?
Amazon, compa
compatible with RC2 ?