Be a friend, Subscribe, hit the like button, and SAY HELLO!
Have I helped you? Please consider a TIP:
www.paypal.me/cerenzio
www.venmo.com/gregg-cerenzio
Support this Channel: Use my links, when shopping:
Amazon: amzn.to/2miGQq9
Visit me on Etsy: www.gaetsy.com
Find me on Instagram: www.Instagram.com/GreggAdventure
Пікірлер
Good one, thx.
I did exactly what you showed me in this video. This helped me get my key out 🎉BIG THANKS
Thanks for your video
Awesome mask, I like this version of Jason
How much was it?
Free. I called a construction site, and they dropped it off for free
@@GreggAdventure Oh nice, thank you.
Worked like a charm. Takes all but a few minutes to do.
I just bought the Creality Wi-Fi Box (apparently it's the 2.0 version now, but it look identical to yours) and I had a unused Logitech C270 HD Webcam in hand, but unfortunately it looks like not all Logitech webcam are compatible with the box, because it just do nothing when connecting to the box. Any official list of the Logitech's model that are compatible?
The box is meant to use the Creality Camera, that comes in kit. I've got other Logitechs to work, but not sure a list exists. There is supposedly a Bluetooth version of the Box, but I've never actually seen one. I believe mine to also be the V2. I run about 5 of them
So cool. Love the spinning!
Birthday card
Bro was forced to say what’s your favorite scary movie?
Wut
Thank you my guy
Welcome! Used mine today
Gotta love Ford quality 😅
🚮
Thanks! This helps me SO much!
What ? It's 3D printer ?
Yessir
Do are these still available? Do you ship to Singapore?
Pop into my etsy: youtube.com/@3drundown
Great job of not using an exact science and yet getting the job done well. I was wondering, instead of painting on the fiberglass resin could you dip the cloth in the resin and smooth it out on the surface you're repairing? Really great how to video, by the way!
I find brushing it is the way to go. The fiberglass becomes an absolute birds nest from hell otherwise. Resin is SO sticky. Fiberglass MATT may work that way.
@@GreggAdventure thanks for your response
Mine is leaking from the side of gasket and also from the inlet! Idk if I’m capable to do this, I’m kinda scared that I will mess up!
Of course you can do it. Get in there!
Seems like a floaty review should be with a float test or no?
Go for it. Toss your Gopro in the water on purpose. :P
@@GreggAdventure Your the one with a floaty and doing the test.
4 Years ago... 😂😂 The 9 and 10 have overheating problems. Ditched all my gopro. Here you go: instagram.com/p/CDKfIHlHhQQ/?igsh=c2xkaXJpMnFpMm96
Scream6
I like your J Voorhees hockey mask friend Gregg this would look good on your animated life size J Voorhees halloween prop did you know that....
I love you friend Gregg
Hey friend gregg do you still have the animated life size Jay Voorhees halloween prop....
Yessir!
@@GreggAdventure do you still set him up every year for halloween....
Sure Do! Halloween is a big thing at my house. People come from all over. He is getting old and beatup though...
@@GreggAdventure Does he still work
Sometimes. Not very well...
Cool time lapse! ^^
Thanks
That ain't food grade safe...ur asking for alzheimers
GFY
How many tons?
Not sure. Was a free delivery. But it covered SO much. Allot more than it looked
thx dude
Holy shit thank you thought i broke it
Visit my other channel for more! @3DRUNDOWN
Can you make me one
Yes, of course. Visit me on www.GAETSY.COM
How do I get a hold of you to get one of these please I need one !
GAETSY.COM
Perfect! First video, no nonsense, no 'hit the like button ' no showing me your children, no music.....take note people, this is how it's done.
I’m pretty sure I have this exact machine. Never could get it to work. Been in my garage. Something isn’t hooked up right on mine. Gonna give it another look. Great video
Mine is still running great. Give it another go!
I was going to buy one similar but decided to refurbish mine but I think refurbish cost more than buying a brand new one right? The bottom is completely rusted so I have to replace it and just got the part after a year of waiting for it. I didn't find the link for the aluminum tape in your comments. I remember I used a tape similar on my gas grill and it burnt out! I like that you did this and I ask you was it worth it? do you still use it after 4 years? thank you
I do indeed still use this grill. It totally costs more, but it's worth it. Very satisfying
@@GreggAdventure thanks for replying. I did put it back to life by replacing the bottom and the ashtray. the rest I tried fixing it. It was so much effort for me not being a handy woman but I did, mosquitoes and humidity. Got it ready for the 4th. I wanted to add a photo but I can't. I have to work on the grill grates still showing rust and the hardware. liked when you got your steaks cooking!
@mz5254 post a pic on insta, or a shared drive like Google Drive, and post the link. 😊 When it comes to the grates, I'd treat the grill to a new set. Mine are about ready to be replaced as well.
Ah, the fumes....
Put your bigboy pants on
@@GreggAdventure big boy pants, so I can die early. 👍
Mine is leaking from the top around the handle
I would start with the gasket
This is helpfull
Those are springs ding dong. You’re a screwball
How much it cost to have 20yards of dirt?
I called a construction site, and they brought it for FREE
Those 12x12 pavers, are they plastic or concrete? I'm looking on amazon for the same ones, but I keep seeing plastic.
Concrete. Pop into a Home Depot
Just what I'm looking for, thank you soooo much, Hallelujah
Get building! Go with deckboard on top. It's much better
Any advice on what to do before you start taking the filter apart? I know you don’t just walk outside and take off the top of the filter.
Not much else to do. If you have cut offs, turn them to off. If you don't. Plug your intake and output, as best you can
Great info
lol i want to know how to prevent the prints from coming off after the bed cools, this is because there are many powercuts where im from
When the bed cools, the glass contracts and they will come off
Can i order one
It's so cool. deactivated it 2 days ago. Been having issues with Fun World's legal people... If want one, order it asap, I just reactivated it for you. greggadventure.etsy.com/listing/1564294925
let me know if change your mind. I will deactivate it again.
I will take it back down for now. Let me know if would like it back up. Message me on GAETSY.COM
Want?
Maybe someone can 3d print this part for us
Feels like something that could be done. Just need somebody to 3D Model it
If you guys can't find it I can print them, I would rather purchase due to lack of free time so if you find part number let me know
I've got 40 printers. Just need a 3D Model of it
cooool
Only my 4th print on my new Glass base and it finished at 1am this morning, here it is 3pm and the print is still stuck to the glass. Every single print i've done on this new glass has stuck itself to the glass to the point of almost breaking to get off.
New glass will hold on for dear life. It needs to Break-In. Use it a bunch, and IPA wipe it between prints.
The straight before the pump is meant to be a bit longer, they usually advise "five times the diameter" of the pipe needs to be before any elbows ect.
Ran it till the pool fell apart last year. Was great. Gave the pump away a few days ago
The people who dislike the video are bin laden supporters
Yup. F*** them
Thanks man!