Welcome to Florida Cracker Kustoms KZread channel. Around here we like the smell of burnt tires & gasoline! If you’re a gear head, you definitely are in the right place!
Thanks, just ordered a psom on ebay to replace/troubleshoot.
@krisn88203 күн бұрын
what seat is that?
@markhornell3 күн бұрын
Should they not go under the chrome cover? Then the 2 lugs will stick out through the cut outs in cover
@MrGsxr100013 күн бұрын
Have you got the motor running yet? How did the intake seal up? Any leaks?
@sethlivingston64275 күн бұрын
whay did you cut it with? ive seen grinders but the sparks would make me nervous.
@happytrails24957 күн бұрын
I have searched and searched for front seat dimensions for pickups and I find no information... The width and depth of the seat, the distance from the steering wheel to the seat back, etc. A lot of redundant information about leg room, etc. but nothing else. I wish you could measure your front seat width and the distance between the steering wheel and the back of the seat (with the seat all the way back), or, are you aware of any web site with that information?? It would save us from repeating your hard work of test driving many other brands! For instance, in my 2007 Ram 1500 the seat is way too narrow for comfort and my belly drags against the steering wheel. Now, granted, I am 70 years old, 5' 8" tall and weigh in at about 400 lbs so I realize every one is different, even the largest of us boys. Thanks for the video!!
@Randall-mt7jk7 күн бұрын
Stay back away from downed power lines!
@gabrielortiz6658 күн бұрын
These Good Ole Boys are informative 💯 🔥
@AntonDoiron9 күн бұрын
lots of somewhat nice broncos in that yard! I had a 94 project bronco but the inner wheel well was rusted out. The tailgate was perfect with no rust! I'd be tempted to take the best one of those broncos and combine parts with the others to make one good bronco. That tan top was probably not the original top as all the 92-96 broncos had center brake lights.
@albertoj53089 күн бұрын
Hey, how are you? I have a question. I have a 1992 f-150 with a 351w and an E4OD. I have a good deal on a M5OD. What do you think about doing that swap? i dont use the truck to tow. It will be just to cruise. Will ot hold up? I know usually is a zf5 behind the 351w
@StasLoban9310 күн бұрын
Rear shackle is facing the wrong direction.
@FloridaCrackerKustoms10 күн бұрын
@@StasLoban93 I wasn’t sure which way was correct , saw conflicting videos of people installing different ways.
@matthewmarquez414611 күн бұрын
What are the tires and rims you have on this truck ?
@ckennedy30912 күн бұрын
For a 2001 jimmy or whatever? Good luck. They'll have to be custom. And you'll have zero room but it is possible. Youll need the smallest projector made
@cruzernesto7812 күн бұрын
I did the same on my 2021 lariat . The only issue I have is that the there aren’t marker lights like in the super duty , so. Ow I regret the $2, 000 upgrade . And I’m kinda scare to take apart to install the marker light from boost auto parts .
@rwh_10 күн бұрын
I believe you can enable the markers in forscan
@8jacob88813 күн бұрын
Did you have to do any adjusting to the drive shaft??
@3lP3RR0Mu3Rto13 күн бұрын
Can we get an update on what part you used. The link is broken
@flynneart111114 күн бұрын
Perfect by a pond too, but you won't see your pond now?
@flinch62217 күн бұрын
A little blast from the past... kzread.info/dash/bejne/dJ97tdiYYbWyYdo.html Skip to 18m 54s mark and note the run-in time was "about ten minutes". Thats it. I can't find that info at any cam company today. I have a vague recollection of gm time being six minutes, but I can't find it, so maybe that isn''t so.
@curtissmith592418 күн бұрын
So glad I came across your video! I was pretty set on cutting 2 coils, but decided I'd better do 1 1/2 and check it out. 1 1/2 is PERFECT! Thanks!
@GhummanGamerzOfficial19 күн бұрын
Hi, I wanna ask that can I add these mirrors with 360° camera on my 2022 ford f-150 XL STX?
@FloridaCrackerKustoms18 күн бұрын
@@GhummanGamerzOfficial if your truck currently has the 360 camera system then you can do the swap.
@GhummanGamerzOfficial18 күн бұрын
@@FloridaCrackerKustoms my truck doesn’t have that
@bryanlittle434521 күн бұрын
Just use a 27 mm socket and a rachet it's a lot easier.
@SawKustomz24 күн бұрын
Awesome seeing jess getting out there!
@FloridaCrackerKustoms20 күн бұрын
@@SawKustomz it’s a lot more fun when she’s out in the shop with me, she’s been doing awesome & learning quick!
@johncrothers968627 күн бұрын
Thanks for the video
@johncrothers968627 күн бұрын
2001 Electra glide classic 10 bars, all wiring and throttle cable okay I had to go with a longer front brake line stock one too short
@Majorbanjo27 күн бұрын
What a great sport she is.....awesome video.....
@jameslaughlin329828 күн бұрын
So when you ride do you have a pretty good bend in your elbows, or are your arms still straight?
@edwardcourt100429 күн бұрын
Hey, thanks a ton for that video! I followed your steps to a T, and bam, no more bog! Just in the nick of time too-I was about to draft an obituary for my AVS2 carb. Guess that’s on hold for now!
@johnelliott7375Ай бұрын
Should be a good running truck when you are done
@johnelliott7375Ай бұрын
Back again I had to see what your plan is now!
@johnelliott7375Ай бұрын
I feel that pain and I hate to see you go through all the work and have to do it all over again!
@johnelliott7375Ай бұрын
Can't wait to see you break in the motor!
@johnelliott7375Ай бұрын
Add zinc additive to the Royal Purple and the break in should be flawless.
@johnelliott7375Ай бұрын
19:59 Looking good this morning!
@johnelliott7375Ай бұрын
19:59 Looking good this morning!
@johnelliott7375Ай бұрын
Couple are wore and should have a Ford # on it
@johnelliott7375Ай бұрын
Too bad you don't have a good old long bolt to put in the end and easily walk it out.
@johnelliott7375Ай бұрын
Smart man with the bolts and you will not have a issue period.
@johnelliott7375Ай бұрын
Your correct on the oil and if it wasn't changed every 2-3500 miles you will have a little bit of junk in the top of the heads and valley.
@johnelliott7375Ай бұрын
She was tore into a couple of times, especially with the bolts coming right out. Usually in my 40+ years of mechanical work I will say that you should have had to work at getting the bolts out if original piece.
@johnelliott7375Ай бұрын
Lack of spark in a couple of the cylinders.
@johnelliott7375Ай бұрын
Couple of discolored plugs and valves
@johnelliott7375Ай бұрын
We will know what we are dealing with soon as you get the camshaft out of the block.
@johnelliott7375Ай бұрын
Small dish on the bottom of the first one you showed me.
@johnelliott7375Ай бұрын
Should be okay, if you think the bearings are still good, your in business!
@johnelliott7375Ай бұрын
Hopefully you are right about the bottom end!
@johnelliott7375Ай бұрын
Agreed with your valve covers and extra HP when you put it back together and I enjoy your channel!
@devioushernandez1166Ай бұрын
Im have a problem with my 96 tahoe i do t kno what it is im not a machanic people are telling me its the spider idk what were ur systoms of a bad spider
@RobertDickens2002Ай бұрын
I could be wrong but I don't think it's that unusual to not use a gasket with factory manifolds maybe just some copper spray.
@OutbackExoticsАй бұрын
Great video what year is that Beauty in the garage
@FloridaCrackerKustoms27 күн бұрын
1986 F150 V8 4speed
@CarlGerhardt1Ай бұрын
What year did Ford switch from the old 2-piece style seal to the modern 1-piece?
Пікірлер
Thanks, just ordered a psom on ebay to replace/troubleshoot.
what seat is that?
Should they not go under the chrome cover? Then the 2 lugs will stick out through the cut outs in cover
Have you got the motor running yet? How did the intake seal up? Any leaks?
whay did you cut it with? ive seen grinders but the sparks would make me nervous.
I have searched and searched for front seat dimensions for pickups and I find no information... The width and depth of the seat, the distance from the steering wheel to the seat back, etc. A lot of redundant information about leg room, etc. but nothing else. I wish you could measure your front seat width and the distance between the steering wheel and the back of the seat (with the seat all the way back), or, are you aware of any web site with that information?? It would save us from repeating your hard work of test driving many other brands! For instance, in my 2007 Ram 1500 the seat is way too narrow for comfort and my belly drags against the steering wheel. Now, granted, I am 70 years old, 5' 8" tall and weigh in at about 400 lbs so I realize every one is different, even the largest of us boys. Thanks for the video!!
Stay back away from downed power lines!
These Good Ole Boys are informative 💯 🔥
lots of somewhat nice broncos in that yard! I had a 94 project bronco but the inner wheel well was rusted out. The tailgate was perfect with no rust! I'd be tempted to take the best one of those broncos and combine parts with the others to make one good bronco. That tan top was probably not the original top as all the 92-96 broncos had center brake lights.
Hey, how are you? I have a question. I have a 1992 f-150 with a 351w and an E4OD. I have a good deal on a M5OD. What do you think about doing that swap? i dont use the truck to tow. It will be just to cruise. Will ot hold up? I know usually is a zf5 behind the 351w
Rear shackle is facing the wrong direction.
@@StasLoban93 I wasn’t sure which way was correct , saw conflicting videos of people installing different ways.
What are the tires and rims you have on this truck ?
For a 2001 jimmy or whatever? Good luck. They'll have to be custom. And you'll have zero room but it is possible. Youll need the smallest projector made
I did the same on my 2021 lariat . The only issue I have is that the there aren’t marker lights like in the super duty , so. Ow I regret the $2, 000 upgrade . And I’m kinda scare to take apart to install the marker light from boost auto parts .
I believe you can enable the markers in forscan
Did you have to do any adjusting to the drive shaft??
Can we get an update on what part you used. The link is broken
Perfect by a pond too, but you won't see your pond now?
A little blast from the past... kzread.info/dash/bejne/dJ97tdiYYbWyYdo.html Skip to 18m 54s mark and note the run-in time was "about ten minutes". Thats it. I can't find that info at any cam company today. I have a vague recollection of gm time being six minutes, but I can't find it, so maybe that isn''t so.
So glad I came across your video! I was pretty set on cutting 2 coils, but decided I'd better do 1 1/2 and check it out. 1 1/2 is PERFECT! Thanks!
Hi, I wanna ask that can I add these mirrors with 360° camera on my 2022 ford f-150 XL STX?
@@GhummanGamerzOfficial if your truck currently has the 360 camera system then you can do the swap.
@@FloridaCrackerKustoms my truck doesn’t have that
Just use a 27 mm socket and a rachet it's a lot easier.
Awesome seeing jess getting out there!
@@SawKustomz it’s a lot more fun when she’s out in the shop with me, she’s been doing awesome & learning quick!
Thanks for the video
2001 Electra glide classic 10 bars, all wiring and throttle cable okay I had to go with a longer front brake line stock one too short
What a great sport she is.....awesome video.....
So when you ride do you have a pretty good bend in your elbows, or are your arms still straight?
Hey, thanks a ton for that video! I followed your steps to a T, and bam, no more bog! Just in the nick of time too-I was about to draft an obituary for my AVS2 carb. Guess that’s on hold for now!
Should be a good running truck when you are done
Back again I had to see what your plan is now!
I feel that pain and I hate to see you go through all the work and have to do it all over again!
Can't wait to see you break in the motor!
Add zinc additive to the Royal Purple and the break in should be flawless.
19:59 Looking good this morning!
19:59 Looking good this morning!
Couple are wore and should have a Ford # on it
Too bad you don't have a good old long bolt to put in the end and easily walk it out.
Smart man with the bolts and you will not have a issue period.
Your correct on the oil and if it wasn't changed every 2-3500 miles you will have a little bit of junk in the top of the heads and valley.
She was tore into a couple of times, especially with the bolts coming right out. Usually in my 40+ years of mechanical work I will say that you should have had to work at getting the bolts out if original piece.
Lack of spark in a couple of the cylinders.
Couple of discolored plugs and valves
We will know what we are dealing with soon as you get the camshaft out of the block.
Small dish on the bottom of the first one you showed me.
Should be okay, if you think the bearings are still good, your in business!
Hopefully you are right about the bottom end!
Agreed with your valve covers and extra HP when you put it back together and I enjoy your channel!
Im have a problem with my 96 tahoe i do t kno what it is im not a machanic people are telling me its the spider idk what were ur systoms of a bad spider
I could be wrong but I don't think it's that unusual to not use a gasket with factory manifolds maybe just some copper spray.
Great video what year is that Beauty in the garage
1986 F150 V8 4speed
What year did Ford switch from the old 2-piece style seal to the modern 1-piece?