Пікірлер

• 
  @todd50525 күн бұрын

  Good luck to anybody trying to get these steps now. GM is so backordered that they won't even take new orders

• 
  @ferrarifxs5 күн бұрын

  That's a bummer

• 
  @findlaywilliams18678 күн бұрын

  do i need to drain anything before doing this

• 
  @ferrarifxs8 күн бұрын

  Coolant

• 
  @robertomontanez116313 күн бұрын

  Hey there, since you seem to be an expert on the 458, could I ask if you know about this code: B1004, Super lift Failure (AUTEL ELITE SCANNER)? The car is having problems with the lift, and the suspension is occasionally becoming excessively stiff, even in Manettino Comfort Mode. It's a 2012 458 Italia with only 13,000 miles on the odometer. Thanks!

• 
  @ferrarifxs12 күн бұрын

  Email me at [email protected] and I will send you some info

• 
  @ignaciochapa385016 күн бұрын

  Hey I am at the dealership now working my deal and got the steps included for a truck that did not have. But they can’t find them in the parts catalog. Where did you get yours

• 
  @ferrarifxs16 күн бұрын

  I purchased on line at gm parts on line and sent to local dealership for pickup. 10% discount on line part numbers are in the description

• 
  @ferrarifxs16 күн бұрын

  kzread.info/dash/bejne/hnp3ptuAl9mseKQ.htmlsi=4DKsJmDZHBz78NJL

• 
  @kevinerasmus442116 күн бұрын

  👍 nice

• 
  @ferrarifxs14 күн бұрын

  Thanks

• 
  @ParkHersant16 күн бұрын

  Thank you for the video! Needed to know how to pull the A pillar trim off my car without damaging it !!

• 
  @mikesreviews333418 күн бұрын

  Will this work on older 360's, such as the 2001 model year? Also, can I bleed the clutch using this tool?

• 
  @ferrarifxs18 күн бұрын

  It's should work and yes it should bleed your clutch

• 
  @cantdriveslo18 күн бұрын

  I was wondering why a Canyon appeared different from my Colorado. Thx!

• 
  @SunithaWirasiri19 күн бұрын

  It is my cars

• 
  @SuperAIRMAN4420 күн бұрын

  New Talent...Selling cars. A sound comparison and drive comparison would be a subject for a new vid. Very thorough explanatons.

• 
  @ferrarifxs20 күн бұрын

  Thanks

• 
  @SuperAIRMAN4421 күн бұрын

  nice organized work with that complex assembly. Sad that you'll have to repeat it when the missing part shows up. Wish we'd known that earlier.

• 
  @ferrarifxs21 күн бұрын

  .

• 
  @SuperAIRMAN4421 күн бұрын

  Awesome that you got it all together and working again. I know it was a nightmare.

• 
  @ferrarifxs21 күн бұрын

  .

• 
  @ferrarifxs21 күн бұрын

  .

• 
  @maikmaik-ie6zz22 күн бұрын

  hai acquistato un pacchetto a pagamento ? o pure hai messo solo il vin e ha fatto tutto lui senza comprare nulla ?

• 
  @ferrarifxs22 күн бұрын

  I purchased a subscription with scanner

• 
  @maikmaik-ie6zz23 күн бұрын

  ciao la tua auto che anno é ?

• 
  @ferrarifxs23 күн бұрын

  2003

• 
  @jeffhong316123 күн бұрын

  Do you have a video where you replace the upper and lower oil pan gasket?

• 
  @ferrarifxs23 күн бұрын

  No

• 
  @maikmaik-ie6zz25 күн бұрын

  ho un problema ho un launch ufficiale 431 ma non mi fa entrare nel cambio , avendo pacchetto ferrari .. mi puoi aiutare ? ho provato anche con thinkdiag e non entra nemmeno ... cosa posso fare ? sto impazzendo

• 
  @ferrarifxs24 күн бұрын

  kzread.info/dash/bejne/iadh186aZ6zLm8Y.htmlsi=LfIXSTWOioWga0CU try to update your scanner and watch video.

• 
  @JJ-rf7dg25 күн бұрын

  I had the Truxedo LO Pro Tonneau its the best manufacture .

• 
  @regioncycle3119Ай бұрын

  Thank you my man! Great Video

• 
  @ferrarifxsАй бұрын

  No problem!

• 
  @SteveyZee2012Ай бұрын

  If your vehicle doesn't have the ok button on the steering wheel,push the button on your trun signal lever. This is the ok button on models like that

• 
  @ferrarifxsАй бұрын

  .

• 
  @whipappeal4869Ай бұрын

  Love it. Was the light sabre sound a reference to darth vader?

• 
  @ferrarifxsАй бұрын

  Text message while filming

• 
  @JohnCoryatАй бұрын

  Those aftermarket wind stops are awful. If you're going to go through all the trouble of replacing the wind stops, get the OEM units. They're about three times as expensive but they look right. It's better to simply remove the bad ones than replace them with substandard and ugly after market units. That's my opinion anyway.

• 
  @ferrarifxsАй бұрын

  I not sure what aftermarket ones you purchased? But they fit excellent and I guess if you want to replace every few years. That's your decision.

• 
  @jeztickles4361Ай бұрын

  I’m first

• 
  @ferrarifxsАй бұрын

  .

• 
  @chillbro8811Ай бұрын

  Would putting some oil in oil filter before installing be good idea or bad?

• 
  @ferrarifxsАй бұрын

  You could pre oil but not necessary.

• 
  @frastiga2771Ай бұрын

  Could u please illustrate to me how i change the Ferrari California t 2016 external mirror switch ?

• 
  @ferrarifxsАй бұрын

  I would if I had a car to perform this task. No car available currently. Thanks for watching my channel

• 
  @peterdur5596Ай бұрын

  PERFECTO.. .FROM AUSTRIA ...

• 
  @johnfernandez991Ай бұрын

  How much corn the combine holds?, why does the combine does not cut the same plot after finishing it finish the road?.

• 
  @ferrarifxsАй бұрын

  350 bushel of corn. So the grain wagon can follow during harvesting incase they need to unload

• 
  @ceezauto213Ай бұрын

  Thanks for clarifying which banks are which. But would you know which vanos is the exhaust/intake. I need to clean out (VANOS exhaust 2)

• 
  @ferrarifxsАй бұрын

  I would probably say In boards are exhaust. Because your exhaust exits on the inboard side of the block. Your intake tube's are on the outside of the block

• 
  @michaeldavis1659Ай бұрын

  O-ring and a crush washers on the drain plug? I've never seen that before. The crush washer should be enough. Help me out, if I'm wrong here

• 
  @ferrarifxsАй бұрын

  Not both. One or the other. At 4:08. I discarded crush washer

• 
  @amgamg93Ай бұрын

  Thank you for always posting useful videos. I wanted to purchase the Maddox MH 1B introduced this time, so I looked on the site, but it wasn't for sale. I'm from Japan.

• 
  @ferrarifxsАй бұрын

  Glad to help

• 
  @alexed97Ай бұрын

  $4k for headlight assembly ? what is the car worth ?

• 
  @ferrarifxsАй бұрын

  Not quite 4k 3100.00 for a new one

• 
  @ferrarifxsАй бұрын

  I guess it all depends were you purchase

• 
  @timothywillis8883Ай бұрын

  Thanks!

• 
  @nocomment_2023Ай бұрын

  Jeff - what was it like to fit this one.

• 
  @ferrarifxsАй бұрын

  This car came with it from the factory. Thus was removed due to other maintenance being performed.

• 
  @karldunne5595Ай бұрын

  Any aftermarket, or engineering solutions for the leaky roof on a rainy day 🤔,..... cheers,.

• 
  @ferrarifxsАй бұрын

  I've not had any leaking problems,

• 
  @robdfarАй бұрын

  so upset that they changed the display on the 2024 and we can not get the duel on the 23

• 
  @juanmaldonado32812 ай бұрын

  A. SUPER. AWESOME. VIDEO. TNKS. SIR👍👍👍👍👍👍👍👍👍👍

• 
  @ferrarifxs2 ай бұрын

  Most welcome

• 
  @HenryGood-bo6fb2 ай бұрын

  I was speaking with a guy works in the parts department at the local Ferrari dealership here when I went to get DCT fluid. He asked if I were changing my DCT fluid myself. I said yes. Then he said "I can’t remember if you need to actuate any of the valves to properly flush it. DCT fluids have friction modifiers to keep the clutches cool engaging smoothly and reduce failure. You’ll want to make sure you remove any residue to prevent it from clogging anything within the system." I have seen no mention of actuating valves when changing the DCT fluid. Can you let me know if you did this or not or if you know if it needs to be done? Thanks.

• 
  @ferrarifxs2 ай бұрын

  No. We have ferrari service manual and it doesn't say anything about that. We followed the service manual as directed

• 
  @ferrarifxs2 ай бұрын

  I don't think you should have a problem as long as you use the correct fluids

• 
  @ferrarifxs2 ай бұрын

  The only thing it mentions is to put it in reverse gear when servicing

• 
  @peterdur55962 ай бұрын

  😮😮😮Perfecto....

• 
  @cliftonpearcy2 ай бұрын

  Is there any items left

• 
  @ferrarifxs2 ай бұрын

  Yes

• 
  @patrickXWAY2 ай бұрын

  👍

• 
  @burnings_tv2 ай бұрын

  Can you help me please donu know how to lock the steering wheel while stop and on the parking area to make it secure thanks

• 
  @ferrarifxs2 ай бұрын

  Pull the key out and turn wheel. It should lock on its own, unless you have an issue with your steering column

• 
  @pearlkun272 ай бұрын

  Nice movies! Can you tell me what you use for intake and water manifold gaskets like the gasket maker?

• 
  @ferrarifxs2 ай бұрын

  I used gaskets I purchased from Ferrparts and then applied a thin coat of hylomar sealant on them.

• 
  @SuperAIRMAN442 ай бұрын

  Neat that they put GPS tracking in them now. Wish the one they had included had that. I may convert it to that too sometime.

• 
  @ferrarifxs2 ай бұрын

  Different app also

• 
  @USMCCEB2 ай бұрын

  Hey, brother, thanks for the video. Just wandering if things move around while driving in the bed? The mat does't look like it's rubbery like say the type made by like Husky, which they don't have one for this truck yet, and I'm concerned with things sliding around! Thanks!

• 
  @ferrarifxs2 ай бұрын

  It's rubber and hold stuff in place. Great product

• 
  @EasyFirePits_2 ай бұрын

  i have all the screws out but the left side of the dash is stuck on something (drivers side corner against the window and wondering if there was something else here? removing from a parts car

• 
  @ferrarifxs2 ай бұрын

  Did you check to see if you missed a screw from the bottom going straight up

• 
  @EasyFirePits_2 ай бұрын

  Yeah, ended up getting it in the end, but I think there was a little window goo in the corner of the dash which was really holding it in

• 
  @gmb632 ай бұрын

  What are the Torque specs for the two caliper bolts?

• 
  @ferrarifxs2 ай бұрын

  Front and Rear caliper torque specs | Chevy Colorado & GMC Canyon Jun 13, 2021 - the torque spec for the front is 80Nm (59 lb ft) + 30-45 degrees, and the rear caliper bracket is 100 Nm (74 lb ft) + 15-30 degrees, the rear .

• 
  @HappyHot-AirBalloons-rd5yb2 ай бұрын

  Wao👍

• 
  @Gunker-Imola2 ай бұрын

  I don't understand😅 what's the point of this viper?

• 
  @Kansirz2 ай бұрын

  Stupid concept, cool collectible

• 
  @solarcutgems2 ай бұрын

  Looks like a 1999..? Amazing

• 
  @clementblache10842 ай бұрын

  What happens when it starts to rain ?