Пікірлер

• 
  @charcomojado2 сағат бұрын

  Thats a beautiful grind

• 
  @ScotchNThingsСағат бұрын

  Yes it is

• 
  @edged_mindset3 сағат бұрын

  Unfortunately the 31 will never be as smooth as the 21's just due to how they are built. And you can't crank the 31 pivot down like the 21's either

• 
  @ScotchNThingsСағат бұрын

  Ya that’s why I started scooping up 21’s that interest me. The 31 can get smooth like a well used 21 it just takes some time and still it’s not anywhere really close to a well broken in 21.

• 
  @edged_mindsetСағат бұрын

  @@ScotchNThings 100%

• 
  @markm1484 сағат бұрын

  Frog Lube liquid for removing tape, gunk etc. always works great for me. I have a handful of CRK and only two Grimsmo’s. Both very precise of course, but I think CRK is my kind of precision. I find the Grimsmo hardware not to interface as nice with tool bits. The backspacer closest to the pivot on the 31 affects the pivot tightness so don’t go full blast on that, it can tune tension almost as much as the pivot. Grease only for CRK’s on the washers no matter what Batman or anyone else says. It is designed to run on grease not liquid lubes. Some people mix grease and liquid lube, it just gets messier quicker.

• 
  @ScotchNThingsСағат бұрын

  Ya I agree with you on how well a crk is made. And anyone that likes to bag on them I don’t think ever really spent time with one. I need another 31 or 21 like I need a hole in my head but I’m always looking. For how much I love my striders it’s probably the best one and done knife out there.

• 
  @kf_boston4 сағат бұрын

  Great how2 by Steve video😊 Enjoy your trip bud

• 
  @ScotchNThings4 сағат бұрын

  Haha if I can just help one person on not how to do it I’ve done my job.

• 
  @kf_boston3 сағат бұрын

  @@ScotchNThings haha job well done bro!

• 
  @workinhard234 сағат бұрын

  Got any thoughts on seb vs inkosi? I have been carrying my inkosi more and more lately-kinda itching for a 31🤔

• 
  @ScotchNThings4 сағат бұрын

  I’ve always been a Sebenza guy having 6 of them at the moment. I’ve had a couple inkosis but never kept them around and I don’t really know why. I like them but for me the Sebenza is my favorite

• 
  @steveburdette14784 сағат бұрын

  I think the 21 is by far a better knife

• 
  @sgmann5 сағат бұрын

  thanks for your videos..question::do you like smf performance. more than your new copper smf..they are 300 more on secondary.?.

• 
  @ScotchNThings4 сағат бұрын

  Thanks. I would say I’d take the copper over the new performance ones. But my performance is one of the older og ones so I’d take that over the copper if that helps.

• 
  @Din474718 сағат бұрын

  I had the same issue , the Chris Reeve white fluoride lube worked for mine

• 
  @ScotchNThings7 сағат бұрын

  Sweet I’ll give it a go

• 
  @MitchBollig19 сағат бұрын

  Damn...I was stressed for you - can't imagine how you felt (other than by the colorful language 😂). Good work.✌️

• 
  @ScotchNThings7 сағат бұрын

  Haha. Ya when I rewatched it I was like oh got a little spicy

• 
  @johnmartyn9018Күн бұрын

  Just scored one! I have a few Striders but no Titanium DGG SNGs or SMFs. That is, ‘till this new one comes.

• 
  @ScotchNThings7 сағат бұрын

  Congrats man. Ya they really did a good job on these.

• 
  @glockmeister26Күн бұрын

  Nails on a chalk board.

• 
  @ScotchNThings7 сағат бұрын

  Haha. It’s for sure

• 
  @FranksbowsbladesandbangerКүн бұрын

  So sick

• 
  @ScotchNThingsКүн бұрын

  Thanks

• 
  @paulmills426Күн бұрын

  That's pretty cool, a titanium bladed strider. 👍🇺🇲💪💯💵💥ER 🤘

• 
  @ScotchNThingsКүн бұрын

  Thanks man. Ya it’s a cool one

• 
  @user-ju8pl5vy4dКүн бұрын

  The non relief was purposely done not to disengage the lock while using it hard

• 
  @ScotchNThingsКүн бұрын

  Could l

• 
  @ScotchNThingsКүн бұрын

  Cool

• 
  @disismrcКүн бұрын

  They should send you some new caged bearing set brother. Should fix the issue.

• 
  @ScotchNThingsКүн бұрын

  Ya after this cleaning it smoothed out perfectly after a day.

• 
  @kf_bostonКүн бұрын

  Back home 🍻

• 
  @ScotchNThingsКүн бұрын

  Yep glad to have the OG back.

• 
  @workinhard23Күн бұрын

  Dood! Both are so awesome!

• 
  @ScotchNThingsКүн бұрын

  Thanks man.

• 
  @jeffseifert5527Күн бұрын

  I've traded several knives back numerous times, glad I'm not the only one......

• 
  @ScotchNThingsКүн бұрын

  Haha I know it seemed excessive but to get your first back is nice. I’ve sold or traded a lot only to rebuy them later also

• 
  @satudaveКүн бұрын

  Glad you decided to re-acquire it bro. Know you missed it🤘🤘

• 
  @ScotchNThingsКүн бұрын

  Ya it was nice to get my first custom back.

• 
  @profesorEDCКүн бұрын

  I love that XL first time I saw it was here. Just a gorgeous Strider. Hope it sticks around.

• 
  @ScotchNThingsКүн бұрын

  Ya it being my first custom I’m glad I got it back. It’s so unique I don’t think I’ll let it go again

• 
  @meursault1654Күн бұрын

  Ox-gard on lock face was suggested and works great for stick on Ti locks on steel. On a Ti blade? Maybe. Very cool knife that u got back!!

• 
  @ScotchNThingsКүн бұрын

  Ya I’m glad I got my first custom back. After talking with other strike plate guys it’s just how it is.

• 
  @kathleensmith370Күн бұрын

  amazing milling

• 
  @ScotchNThingsКүн бұрын

  Definitely

• 
  @douglasmstewartКүн бұрын

  I had a Shin for a long time. And now I’m getting the itch to get another Rockstead. (It’s why I’m commenting on a two year old video)

• 
  @ScotchNThingsКүн бұрын

  Haha I get it. I’m always on DLT looking at them.

• 
  @_____m_a_n_____8990Күн бұрын

  You ever try gunny glide? Best stuff I’ve found. Seems to last a long time too

• 
  @ScotchNThingsКүн бұрын

  Oh ya I use it on almost everything

• 
  @grimflipzКүн бұрын

  Grinding on the lock bar release, isn’t this bad boy broken in ?

• 
  @ScotchNThingsКүн бұрын

  It’s a ti blade. Oh it’s broken in as much as it’s going to.

• 
  @CrispyCritter04Күн бұрын

  Squeaky Beast

• 
  @ScotchNThingsКүн бұрын

  Haha ya you’ll hear me coming

• 
  @88HD_Күн бұрын

  Sweet knife, hard on the ears 😂

• 
  @ScotchNThingsКүн бұрын

  Haha. They are.

• 
  @Damen0530Күн бұрын

  Those XL’s are beasts!

• 
  @ScotchNThingsКүн бұрын

  Man I love them.

• 
  @gareygerosky80302 күн бұрын

  I own two Herman's and i hope i never have to take them apart.thanks for the tutorial

• 
  @ScotchNThings2 күн бұрын

  Haha. Thanks I hope it helped in what not to do. But the knife did smooth out and is perfect now

• 
  @gareygerosky80302 күн бұрын

  @@ScotchNThings glad to hear that

• 
  @tonymacias24962 күн бұрын

  Thank you for the video!

• 
  @ScotchNThings2 күн бұрын

  Thanks for watching

• 
  @stephenfichter43962 күн бұрын

  Once the dlc wears off the bearing path it will be fine. Your feeling it wear through the coating :)

• 
  @ScotchNThings2 күн бұрын

  Yep smooth as butter now

• 
  @dombond65152 күн бұрын

  Hey u have the hinderer for sale still???

• 
  @ScotchNThings2 күн бұрын

  Sorry it sold

• 
  @Franksbowsbladesandbanger2 күн бұрын

  Greatest knife video ever.

• 
  @ScotchNThings2 күн бұрын

  Haha I try

• 
  @f.s.candinoindustriespakis95382 күн бұрын

  F.S. Candino Industries Pakistan @f.s.candinoindustriespakis

• 
  @5door2 күн бұрын

  I missed these, though it was slightly stressful. I was rooting for you though. 😂 That thing was Emerson-level dirty. I’ve had that ratcheting action once - ABW - and it was a bearing issue. Beautiful knife though.

• 
  @ScotchNThings2 күн бұрын

  Haha now when ever I do one of these I think I hope he likes it. Haha. I might do a crk just for fun now. Ya i I switched the oil and after a day it smoothed out

• 
  @5door19 сағат бұрын

  @@ScotchNThings haha I like them all. Glad it smoothed out - it’s too nice to have janky action

• 
  @satudave2 күн бұрын

  Hopefully it’s all dialed in now.

• 
  @ScotchNThings2 күн бұрын

  Ya it took a day but it’s good now.

• 
  @mikeysbladeworks10002 күн бұрын

  “T6, idc if you make the screws yourself…wtf.” 😂😂😂

• 
  @ScotchNThings2 күн бұрын

  Haha no kidding

• 
  @peanutschatzie41292 күн бұрын

  damn, that handle finish is really nice looking

• 
  @ScotchNThings2 күн бұрын

  Ya and it gives it some grip in hand

• 
  @kathleensmith3702 күн бұрын

  you are brave

• 
  @ScotchNThings2 күн бұрын

  Haha or drunk

• 
  @Damen05302 күн бұрын

  The knife looks awesome, but if the action isn’t up to par, it takes away from the aesthetics.

• 
  @ScotchNThings2 күн бұрын

  Ya I don’t know what was the deal. I find that the gunnie glide works better than the nano oil. After this video it was smooth as butter by the next day

• 
  @Damen05302 күн бұрын

  @@ScotchNThings weird, maybe just a bit of something stuck in the bearings. Glad it worked out, they get great reviews

• 
  @samlackey58333 күн бұрын

  I hate you 😡

• 
  @kevinmiser53253 күн бұрын

  Theme song for the channel

• 
  @ScotchNThings2 күн бұрын

  Haha definitely

• 
  @profesorEDC3 күн бұрын

  Awesome 👌

• 
  @ScotchNThings3 күн бұрын

  Thanks man.

• 
  @profesorEDC3 күн бұрын

  @@ScotchNThings Enjoy it Steve 👌

• 
  @sithmar9293 күн бұрын

  Very cool stripes on the handle, can you tell us in terms of cutting edge how much much more does the XL have opposite the SMF?

• 
  @ScotchNThings3 күн бұрын

  About 1/4”

• 
  @cslate364 күн бұрын

  My ria 45 has been converted to 460 rawland for 3 years absolutely no problems

• 
  @ScotchNThings4 күн бұрын

  Very cool.

• 
  @jasminsuljic44874 күн бұрын

  Your trigger pin is stock and hammer pin is geissle use geissle for both please

• 
  @ScotchNThings4 күн бұрын

  Ok

• 
  @Ryanastenger15 күн бұрын

  Definitely enjoy the warranty you get with USA manufacturers, for the most part I have had great luck with my USA made knives. But I sleep good knowing that if anything ever happens the companies I have bought knives from will take care of any issue I may have. Especially love Spartan Blades customer service they are extremely responsive. Love to do business with companies that stand behind their product. If you are ever in north Alabama check out St. nicks knives in Athens, Al great selection.

• 
  @ScotchNThings4 күн бұрын

  Thanks for the tip. Ya I like that if there’s an issue I know all I have to do is send it in. I’ve even had makers call to talk about any issues I’ve had.

• 
  @Ryanastenger15 күн бұрын

  Definitely enjoy the warranty you get with USA manufacturers, for the most part I have had great luck with my USA made knives. But I sleep good knowing that if anything ever happens the companies I have bought knives from will take care of any issue I may have. Especially love Spartan Blades customer service they are extremely responsive. Love to do business with companies that stand behind their product.

• 
  @ScotchNThingsКүн бұрын

  Think this got posted twice haha.

• 
  @disismrc5 күн бұрын

  Congrats brother. I got my XL arriving this week too.

• 
  @ScotchNThings5 күн бұрын

  Ice. I think they are great. What ver did you get?

• 
  @disismrcКүн бұрын

  @@ScotchNThings XL just like yours same blade, frame is strider striped, posting it up into the group tonight.

• 
  @ScotchNThingsКүн бұрын

  @@disismrc nice. I found out that these blades are ground by Mick and one other guy that’s why he doesn’t sign them. So there’s a 50/50 shot he ground yours.

• 
  @noahceteras2595 күн бұрын

  That blade shape is so sweet, especially since that’s not a very common “strider grind”. That thing is sweet. Nice job.

• 
  @ScotchNThings5 күн бұрын

  Ya the more and more I look at it I appreciate the grinds even more.

• 
  @scrick71125 күн бұрын

  You said call you crazy. Your crazy. I wouldn’t use that at work. Some would call it a queen. Just saying. See ya

• 
  @ScotchNThings5 күн бұрын

  Ya but if you don’t get to use it. What fun is it

• 
  @scrick71125 күн бұрын

  @@ScotchNThings ya got me. Enjoy