Пікірлер

• 
  @DPCPhotosКүн бұрын

  Great review! Doesn't look like these are available on Amazon anymore. Are these legal in the USA?

• 
  @contemporaryprimitiveman34694 күн бұрын

  I bought my 029 in 1996 and it still runs great! How can I find out when my warranty is up?

• 
  @oldgeezerproductions5 күн бұрын

  I bought two of those Chinese Brunton copies and found that they are well designed, rugged and well made EXCEPT the hinge is terrible and causes the alignment to wobble. I improved the hinges by substituting the crummy hinge axles for solid metal axles and now my compasses are more useful and more rugged than is my real Brunton Compass that I bought over 50 years ago. My plastic Brunton knockoffs are much lighter than the solid metal Brunton and they aren't nearly as easily damaged as the real thing is. If you are a geology student, you won't have the "prestige" of owning a Brunton, but you will have the full functionality of a Brunton at a tiny fraction of the price.

• 
  @sjalana18 күн бұрын

  I tough that all this parts are supposed to go in a ultrasound machine then cleaning with anti rust solutions and after that comes the lubrication and assembly,what kind of rod comes with this reel.

• 
  @kennyc38810 күн бұрын

  Too much solder.

• 
  @anthonymarino426012 күн бұрын

  well said thanks

• 
  @cartee7218 күн бұрын

  Did they ever make a lefty in the early yrs? I’ve only seen righty

• 
  @cartee7218 күн бұрын

  Did they ever make a lefty in the early yrs? I’ve only seen righty

• 
  @mitchellemstraining1Ай бұрын

  CAT for the win. this is garbage.

• 
  @MrBessard65Ай бұрын

  TAKE IT BACK MAN !!!!!

• 
  @jgaffney6Ай бұрын

  Very helpful I found it very intresting K4YNA

• 
  @brentphillips262Ай бұрын

  Bought mine new years ago. Used it commercially for land clearing. Starts right up to this day. Great saw. Never had any issues with the way it runs or idles. Interesting mod. Considering it because I do believe in letting an engine breath however, it runs like a champ and cuts logs without any noticeable issues bogging down etc. i also was taught if it's not broke, don't fix it. Hmmm. Something to think about.

• 
  @michaelpage4199Ай бұрын

  Hi Hi great review on this radio you made this super easy to follow. Treating myself to one of these for Father’s Day. Again thanks for sharing. 73’s. Mike

• 
  @pache2112Ай бұрын

  Shoot the moon. Shoot the moon. Shoot the moon.😮

• 
  @DanRockTVАй бұрын

  WHAT CHANNEL SHOULD I USE AT MY HOUSE ?

• 
  @ChrisForanForanАй бұрын

  💡💡💡

• 
  @ChrisForanForanАй бұрын

  I have the Coleman night light fixture from the good old year of 1996 and the Coleman night light fixture still works like it is still brand new right out of the Coleman factory💡💡💡

• 
  @GregariousAntithesisАй бұрын

  I keep mine running as well bought it in around 2005, got a sacrificial for free for spare parts. I gave up on the switch just touch the wires together to kill it. Reason i keep it going is it has a pole saw attachment with it. Only thing i have to rebuild the carb diaphram a so many years but now that i found ethanol free gas its seems to last longer.

• 
  @design2surviveАй бұрын

  It really won’t die. Every year I get excited to go get a stihl.. but then it starts up on the second pull.

• 
  @GregariousAntithesisАй бұрын

  @@design2survive i wont pay for a stihl overrated i have an echo vac blower that keeps going no carb issues so if i buy anything it will be echo. My buddy back in DC runs a sideline arborist business and he uses echo now as well. I use both the pole saw and trimmer quite a bit so i definitely dont want to have to contend with two pieces of equipment keeping them going. Two strokes are great until they arent then they can be a nightmare.

• 
  @GregariousAntithesisАй бұрын

  @@design2survive you must winterize your equipment and not run ethanol?

• 
  @design2surviveАй бұрын

  @@GregariousAntithesis I never run ethanol, and am hit and miss with winterizing.

• 
  @nammai3031Ай бұрын

  No good

• 
  @Chevy-hw6lwАй бұрын

  Is there anything you don't do exactly by the book? lol

• 
  @design2surviveАй бұрын

  Yeah, but we don’t film that stuff.

• 
  @eligarcia2152 ай бұрын

  Just ordered a pair on eBay and includes a rt22 in the lot.

• 
  @frenchproduccion19 минут бұрын

  think the rt22 the sound dont look very good

• 
  @LeVanPalmer2 ай бұрын

  Is it the same on a 05

• 
  @dallasbeus21172 ай бұрын

  I bought a Mitchell 300a in the mid 70s for $30 and I still use it especially in the spring. I just cleaned and lubed it today using lithium grease. It looks like it may outlast me. Problem is there is nothing that comes close to it if I ever have to replace it. The same goes for the rod I bought with it.

• 
  @hexadecebal2 ай бұрын

  Can't find a tutorial for the Regulus battery replacement. Could you make one? Just a thought.

• 
  @atc61332 ай бұрын

  1984 honda atc 200es big reds had a spot on the back rack just for the em 500 generator

• 
  @tomguertin77132 ай бұрын

  Looks like the blades are on backwards….not sure

• 
  @tristandawson27132 ай бұрын

  I can not explain how helpful this series is. I know you made them forever ago but I have the exact same year machine and this truly is a life saver

• 
  @design2survive2 ай бұрын

  Glad to help..I miss that old machine.

• 
  @eipiel12 ай бұрын

  Hello. Please, could you tell me how I can DELETE just one Memory from the Yaesu FT-1500? Thanks.

• 
  @design2survive2 ай бұрын

  I don’t think you can..you save a new one over the top.

• 
  @SP-nt4sr2 ай бұрын

  I love my VX6, but also have experience with military comms. They are nowhere near military grade, like, or spec.

• 
  @zachstuff2 ай бұрын

  Great to see the progress! With the app changes on the livestream. Set up the horizontal setting prior to going live in the app. Default is set to vertical. Keep up the build updates!!

• 
  @design2survive2 ай бұрын

  Man, I tried that an it didn’t seem to work. I remember this happening before..so I’ll have to go dig into it more.

• 
  @design2survive2 ай бұрын

  Ok, just found it..wow. Weird place to put the feature!

• 
  @michaelohlrich48482 ай бұрын

  From Daytona

• 
  @michaelohlrich48482 ай бұрын

  Hi Sketch!

• 
  @design2survive2 ай бұрын

  Dude! Great to hear from you. Apparently live doesn’t work too well in the shed yet.

• 
  @BORNGEARHEAD2 ай бұрын

  You had it, bro.

• 
  @design2survive2 ай бұрын

  Live fail:(

• 
  @micahwatson90172 ай бұрын

  Yeah buddy! Lookin good.

• 
  @jarvisskooge86022 ай бұрын

  Spark arrestor is overrated… removed mine & use my saw to start camp fires.

• 
  @srl00032 ай бұрын

  Coming along nicely!

• 
  @design2survive2 ай бұрын

  It’s getting there!

• 
  @holleyman19702 ай бұрын

  The restrictions designed into the muffler is to provide a pressure balance after the blow-off phase of the stroke charges the muffler and provides a gas barrier to the transfer phase so it doesn't blow the air/fuel charge out into the muffler. It is also designed for the highest efficiency at full load 9500 RPM and strikes a balance of fuel economy/emissions/performance. Opening up the exhaust a little bit can help the saw breathe better at the expense of more fuel and more particulate but opening too much actually hurts power. It's best to make small changes, tune and test .

• 
  @micahwatson90172 ай бұрын

  Hey man! Good to see you again! Good weather for building a shed. Pro tip: If you rip the tail down to 3 1/2" from the corner of the birds mouth cut to the end of the tail, you'll have a better look if you put 5/4 x 6" facia on the ends of the tails or even if you just attach your gutters directly to the tails.The tail won't interfere with the shearing and siding either.

• 
  @design2survive2 ай бұрын

  Great to hear from you! Yeah that's a good tip, I was sort of wondering if I should do something like that. I ended up notching the siding as you'll see in the next couple of videos. Probably doing it all wrong lol. What you are saying would have been a better, cleaner solution...but I might just end up cutting an extra angle into the tail to shorten it vertically a bit.

• 
  @williamschlumpf10252 ай бұрын

  Just got done replacing the carb and two of the rubber isolating bushings. Tried the hard way first but that plug up against the engine was very difficult until I finally removed the four screws from the housing to the engine. Then it was a simple matter of tipping the engine enough to remove the plug. Oiled the bushings and they popped right in - then inserted the plugs and put the whole thing back together. Not difficult if you pull the engine out of the way and only took a few minutes after wasting an hour or more trying to do it the wrong way. Good video. Thanks.

• 
  @user-wb5ix3hb1m2 ай бұрын

  🤐🤐🤐🤐😷😷😷_😡😡😡🤕🤕🤕

• 
  @MyRcGoSlow3 ай бұрын

  They selling this one for 25$ on fb marketplace

• 
  @design2survive3 ай бұрын

  Get it.

• 
  @MyRcGoSlow3 ай бұрын

  @@design2survive​​⁠some ther guy got it add said 20 obo now he selling it for 40$ and posted leaking gas and not starting lol but he buys and sells lawn mowers pressure washers tillers next time I’ll just get it faster lol

• 
  @design2survive3 ай бұрын

  @@MyRcGoSlow they are great for charging batteries..and fairly reliable.

• 
  @ejsocci26303 ай бұрын

  I have two on them, I am going to be doing it as well.

• 
  @johnmaher78493 ай бұрын

  I have one of these When I put it to work, the tines stop turning Any ideas please

• 
  @MegaNewfie1013 ай бұрын

  What type of grease do you use in the jackhammer as it doesn't say in the book? Thanks!

• 
  @andrewvillavicencio84963 ай бұрын

  Good review thanks. Trying to figure out all their models names, RB / RT/ ?? What does that mean? More affordable than the BTECH MURS-V2

• 
  @newsles23 ай бұрын

  Gresham, Sandy etc? Cool. I'm in Historic SE Gresham/Assert and currently studying for my tech license. Already have an HF/50M base radio so also working towards the general. Got an Alinco mobile arriving Wednesday hence my interest in your vid. We have a Subaru Forester so I guess it will be slightly different but the basic idea is the same I imagine. Btw how does the antenna coax cope with being shut in the back door? I know there's the rubber gaskets but I figured they would still crush coax somewhat or the door hinge might mess up or the door not close properly? I guess not then! Btw, where do I find local repeaters? I looked recently and could only find two in this area on the webnsite I was directed to. Thanks again for the instructional vid.

• 
  @design2survive3 ай бұрын

  We moved to Idaho a few years ago..so not in the area anymore. Yeah, there are tons of repeaters in that area. Use the RepeaterBook app, and it will show you all of them.

• 
  @josephherron76713 ай бұрын

  Too much taking, not enough showing. When you have to dip thru 80% of the video to see how to do the job you’re talking too much.

• 
  @yungsmile75463 ай бұрын

  Stupid

• 
  @jonlewis7583 ай бұрын

  Buy financial coil packs from ECS tuning. You won’t have any issues. I got them and they’re great

• 
  @redred-py4wp3 ай бұрын

  En mi pais esta 300 dolares aproximado, vale la pena?