Пікірлер

• 
  @humbertoolverasanchezАй бұрын

  Comentarios 5

• 
  @tommytomtomtАй бұрын

  You should have left the mirrors in the center.You lost light power eliminating them because the mirror is four more light effects per mirror than And additional rotator you actually made it worse.😅

• 
  @evilmechanic237Ай бұрын

  😆 then you entirely missed the point...which was to make the lightbar exactly as it appeared on the movie car. I wouldn't have bothered swapping those pieces if it wasn't necessary. And it lights up just fine... do you think I need to actually pull people over as a 21ft long cadillac cop car?

• 
  @brownthunder692 ай бұрын

  looks like the drill bit buggered up the vent light

• 
  @jean-lou83462 ай бұрын

  Super ❤

• 
  @Caravan_Ecto_12 ай бұрын

  WHAT'S YOUR INSTAGRAM?

• 
  @kylec.83503 ай бұрын

  Whomever chopped the top off the car should be in prison lol.

• 
  @evilmechanic2373 ай бұрын

  Yeah, then did a crap job of it, and just through plywood over top the original wood flooring, so it all trapped moisture and rotted to junk

• 
  @kreepyits-o77613 ай бұрын

  Looks cool is that going to be in the new movie 👍🏻👍🏻👍🏻

• 
  @evilmechanic2373 ай бұрын

  thanks! Nope, this is for a movie car buff to take out onto the streets and make folks smile.

• 
  @aussiefurbymogwaifan66213 ай бұрын

  Not a fan of how the back was chopped off🙄 It's a flower car, no wonder why the back was "chopped" off

• 
  @evilmechanic2373 ай бұрын

  it was not a flower car, it was a full miller meteor that some idiot chopped the back roof off to make it a mardi gras parade car years ago, and it was left outside to rot. We rebuilt it all and put it back on the road.

• 
  @ct07603 ай бұрын

  What drill size did you use for the clippard hole?

• 
  @genearoth39703 ай бұрын

  If had your classic Cadillac ambience wagon . I would not turn it into another ghost buster wagon !!" I would do upgrades on it . Make it run and stop better and what ever els it needs. Your luck to find one in that shape !" They are hard to find . . . . Have a good day . Gene ,

• 
  @ChesapeakeBayAngler3 ай бұрын

  well done. just as was planned...only need the ladder to go up anyhows

• 
  @hippymoustacherides3 ай бұрын

  You know there’s trouble coming as soon as there’s a ladder. 😂

• 
  @robjett99223 ай бұрын

  That's one way to get down that almost became another

• 
  @theironlegionp57863 ай бұрын

  you got alot of cadillac ambulances-

• 
  @GilmoreofOK3 ай бұрын

  Yall gonna use any of those 64’s in the background or you wanna sell one?

• 
  @evilmechanic2373 ай бұрын

  Some things are coming off the 64 for another build, but would consider selling after that's done.

• 
  @GilmoreofOK3 ай бұрын

  @@evilmechanic237 let’s chat if we may, do you have an Instagram?

• 
  @kitt2000car3 ай бұрын

  I dont get it. You go thru all the trouble of grafting 59 fins and tail lights. But you dont switch the bumper and grill for a 59. Or is that another job for a different day.

• 
  @evilmechanic2373 ай бұрын

  All customer decisions and budget... I would've been happy to take it further. They were happy with it, and have had fun taking it all over the place, even to the original firehouse in NYC

• 
  @aussiefurbymogwaifan66213 ай бұрын

  ​@evilmechanic237 why was the back chopped off??

• 
  @evilmechanic2373 ай бұрын

  @@aussiefurbymogwaifan6621 have no idea why some owner years ago chopped the back off and turned it into a mardi gras car...

• 
  @aussiefurbymogwaifan66213 ай бұрын

  @evilmechanic237 damm... the idea of ecto is to make the design work in with the original 50s/60s design. I also see you have a later 60s ambulance and that 62 that was going to be your first ecto?

• 
  @aussiefurbymogwaifan66213 ай бұрын

  @evilmechanic237 the later 60s ambo looks to be a Superior🧐

• 
  @jenniferscanlon38323 ай бұрын

  Amazing

• 
  @gtemplesrt84 ай бұрын

  Sweet! What year car is that? Mid 60s?

• 
  @evilmechanic2374 ай бұрын

  yep, it is a 1962

• 
  @gtemplesrt84 ай бұрын

  Sweet! Where did you get the small Grote spot lights and what light bars are those and where did you get the propelloray?

• 
  @evilmechanic2374 ай бұрын

  @@gtemplesrt8 the Grote 5-3/4 deck lights stopped production last year, so gotta eBay hunt them. The 48" code3 XL light bars are findable in the vintage light markets, but the blue domes are super rare and expensive now, since production also ended on those in 2019. LP or MX bars are more findable/cheaper, and blue domes for MX bars are still produced at a cheap $50 per price, as apposed to $500 per on XL blue if separate, or $1500+ for a complete single bar. Propellorays are super hard to find in the vintage light markets now, and hit about $1k-2k when they do pop up... Back when I sourced parts for a few of these builds this stuff was still findable and reasonable, but prices have skyrocketed over the past 3 years with the new movies out.

• 
  @gtemplesrt84 ай бұрын

  @evilmechanic237 well that figures, everything I want always seems to cost a fortune! Lol I don't have a car but I'm doing a crew cab fire rescue 4x4 version. I'm just trying to get stuff thats close. Just had a guy quote me $545 for a pair of Dietz lights that are very close to the PAR 46 spotlights. The 4 smaller lights on the roof front and back of the car.

• 
  @evilmechanic2374 ай бұрын

  @@gtemplesrt8 well since you aren't doing an accurate vehicle you aren't stuck with finding the hard stuff. Go for the much cheaper and easier MX light bars and any red light and it will look great

• 
  @eddieshorts23145 ай бұрын

  Do you still have this lightbar?

• 
  @KaciCooperations7 ай бұрын

  Ghostbuster

• 
  @timothyviets99438 ай бұрын

  I could never figure out why the light bars looked “off” to me, this must be it! Thanks

• 
  @multi-stern40249 ай бұрын

  💙💙💙Nice 💙💙💙

• 
  @multi-stern40249 ай бұрын

  Perfekt 💪💙

• 
  @GfourWK49 ай бұрын

  ❤

• 
  @robertalvarado639110 ай бұрын

  where did you find this?

• 
  @ambassadorz11 ай бұрын

  Oh man I think your'e gonna build all my stuff lol (Rob Rider)

• 
  @JOHNSMITH-dc6lr11 ай бұрын

  6 rotators!!!!!!!!!!!!

• 
  @DeLL11611 ай бұрын

  Did you release?

• 
  @TKIROCZ198611 ай бұрын

  Looks great!

• 
  @MercifullUK11 ай бұрын

  Nice clear video, but it’s worth bearing in mind that some of the Spengler wands contain superglue on the nuts/bolts and require significant dismantling in order to replace the clippard.

• 
  @mikespillman3075 Жыл бұрын

  Very cool......

• 
  @rosshutchinson9378 Жыл бұрын

  That looks quite a lot narrower than the trim on the 59.

• 
  @evilmechanic237 Жыл бұрын

  yeah, it definitely is... newer trim has to be fabbed up to make the swap look right.

• 
  @OnnoJansen Жыл бұрын

  very beautifull.. i ask you where i can this eyes buy?

• 
  @evilmechanic237 Жыл бұрын

  www.etsy.com/listing/1456154773

• 
  @evilmechanic237 Жыл бұрын

  you will have to message them about ordering the new custom Tony ET eyes, and they will setup the order.

• 
  @lepidopterist223 Жыл бұрын

  Nice engine sound

• 
  @TwinLitz22 жыл бұрын

  This is the most accurate light bars I’ve seen along with the modified Federal siren

• 
  @djalienone2 жыл бұрын

  what is the difference between the 1984 ecto-1 light bar and the restored one? What about the Ecto-1 afterlife? It seems to me that a different light bar is mounted .. Can you give me detailed information?

• 
  @evilmechanic2372 жыл бұрын

  The Afterlife rear lightbar is the same as the 1984 car, but with Code 3 labeled endcaps. The front lightbar is a wider 54" bar the same size as the 2009 restored Ecto-1 has, but the Afterlife lightbar has six original style rotators in it. I have since updated my front lightbar to match, and will get a video up of that soon for everyone.

• 
  @johnson11b2 жыл бұрын

  Wrong size bar. That’s a 52 inch. The one used in the original is a 48 inch

• 
  @evilmechanic237 Жыл бұрын

  This is the correct size for the restored Ecto-1 and also for Ecto-1 in the latest Ghostbusters Afterlife movie.

• 
  @LSAGFILMS118102 жыл бұрын

  Where did you get this because I’m making a ghostbusters short film and I need this light bar for it lol 😂 by the way it’s really cool

• 
  @AlfredoCruz152 жыл бұрын

  That's Perfect.

• 
  @blockcity94792 жыл бұрын

  my guy you are awesome

• 
  @DYFEA2 жыл бұрын

  Im so glad youre making these, finally a walkthrough of taking these windows out!!! I cant wait to try this

• 
  @aussiefurbymogwaifan66212 жыл бұрын

  It'll be even more interesting to see you cut the walls out on the Lundau parts when the time comes to install these windows. I can imagine it being quite difficult

• 
  @KyleCaf2 жыл бұрын

  Was the trim the same way as the rear door? Bolted in from the inside?

• 
  @evilmechanic2372 жыл бұрын

  Yep

• 
  @thatgeekoliver2 жыл бұрын

  Now That Is Cool

• 
  @vandermey4563 жыл бұрын

  Looks good but the bar on the original Ecto was an xl5000 with independent rotators. If needed I have tons of parts for them.

• 
  @evilmechanic2373 жыл бұрын

  Hey Mike! Yes indeed, but they swapped it to this type on the front bar when Sony restored the car because they "lost" the original lightbars... I got some rotator 48" bars that I'm building out now. If you have any blue domes available I'd love to purchase them to finish the other one off. Feel free to message me.

• 
  @sprprops13 жыл бұрын

  Have any blue domes?

• 
  @evilmechanic2373 жыл бұрын

  @@sprprops1 not any spares right now, sorry.

• 
  @vandermey4563 жыл бұрын

  @@sprprops1 same here, unfortunately blue isn't really a color I collect.

• 
  @robertmayesiii83563 жыл бұрын

  Oooh.. Flash me blue now. 🚨😳😃😯😎😁👍.

• 
  @AlfredoCruz153 жыл бұрын

  ❤👻🚫❤

• 
  @novavillarmia58073 жыл бұрын

  0

• 
  @thierrygaillet32513 жыл бұрын

  Belle rampe 👍 👍 😋

• 
  @georgenewman90253 жыл бұрын

  Nice! That’s the real deal!

• 
  @moviewatcher12393 жыл бұрын

  Cool I've always wanted to see a siren like that it's so amazing the lights everything

• 
  @evilmechanic2373 жыл бұрын

  thanks!

• 
  @moviewatcher12393 жыл бұрын

  @@evilmechanic237 no problem man I'm a huge fan of Ghostbusters I like how their siren sounded

• 
  @evilmechanic2373 жыл бұрын

  @@moviewatcher1239 so the real siren doesn't sound like what you hear on film... That ecto siren was totally manufactured by the sound editing folks for the movie.

• 
  @moviewatcher12393 жыл бұрын

  @@evilmechanic237 true absolutely right

• 
  @gtemplesrt84 ай бұрын

  A company called Feniex makes a siren that has the Ghostbusters siren as the 1st option on their box. They have a lot of choices. I got one the other day now waiting on the lights. Have some lined up though. I need that siren and red light though.