Пікірлер

• 
  @Alex_Aspen4 күн бұрын

  It’s a piece of junk. Already paid 18k $ for all repairs still have a suspension light on.

• 
  @x-man470220 күн бұрын

  Your Combi looks Superb with the new wheels 👌

• 
  @conmanumber122 күн бұрын

  Any h1 in 6400 kelvin?

• 
  @karstenhyldgaard9039Ай бұрын

  What kind of boat is that, it looks really nice. 👌

• 
  @jobathano1660Ай бұрын

  Its a Crescent Virgo, early model. Nice boat, I like the cockpit, size and hull. Perfect for Nordic climate.

• 
  @maowing371Ай бұрын

  oh they where doing a Sale on OEM parts too???

• 
  @jobathano1660Ай бұрын

  Headlights, some interior parts, springs, shocks, suspension arms, some electric stuff, all kinds of bolts and hardware. Some used stuff, like doors and hoods.

• 
  @rustyrobinson8027Ай бұрын

  I love Saab 👍🇺🇸

• 
  @samwu8070Ай бұрын

  your car still looked like a brand new one after 35000 milelage.

• 
  @maowing371Ай бұрын

  I Might go to the Saab Festival but I don't know yet if I can Really want too :)

• 
  @jobathano1660Ай бұрын

  It’s a nice experience and atmosphere, and people coming so far to attend. All along the west cost you can spot the Saabs coming from other countries traveling towards Trollhattan. :)

• 
  @moloreanm1657Ай бұрын

  Thanks for sharing, good video! 👍

• 
  @jobathano1660Ай бұрын

  Thanks for watching!

• 
  @turbone6028Ай бұрын

  Great info! Btw your car is soo nice and shiney, did u repaint it or just brought it to some detailing shop?

• 
  @jobathano1660Ай бұрын

  Thanks, did a paint correction myself, got most of the swirl marks away, just takes so much time and patience. Then ceramic coated it, then I should maybe wax it to give it the final gloss. So it looks fairly good now, especially in the shade on camera. But it’s a 18 year old car with 353.000km, so if you look closer it’s far from perfect, but good enough for me :)

• 
  @proshanto9153Ай бұрын

  Thats the feature of Volvo...the dealers cant find this noise apparently😂😂

• 
  @muelledriverАй бұрын

  Thanks

• 
  @elvijsgutmanis5385Ай бұрын

  Where can i contact you outside of KZread?

• 
  @jobathano1660Ай бұрын

  What do you need help with?

• 
  @elvijsgutmanis5385Ай бұрын

  ​@@jobathano1660 it seemes that you know a thing or two about 9-3's. Just wanted to have a chat as a enthusiast to a enthusiast.

• 
  @jakewinter-et7sl10 күн бұрын

  @@jobathano1660 im going to buy one in a week , it says water in the fuel on the dash does that mean walk away

• 
  @nuuttiniiranen867Ай бұрын

  I have the older 9-3 and sound insulation is very poor and bass escapes from all the little holes. Buy heavy rubber to cover the whole door👍

• 
  @jobathano1660Ай бұрын

  Thanks for sharing

• 
  @zune5112Ай бұрын

  Is this led canbus one?

• 
  @jobathano1660Ай бұрын

  No

• 
  @ellenconley1371Ай бұрын

  😂😂😂😂😂😂are you really hanging out your window stop it😂😂😂😂

• 
  @msf21262 ай бұрын

  So they just force fit over?

• 
  @jobathano1660Ай бұрын

  Yes

• 
  @MrLovson2 ай бұрын

  Har du länk till butik? Med vänlig hälsning,

• 
  @jobathano16602 ай бұрын

  Sök med delnummer på speedparts f.eks

• 
  @kobilebov97182 ай бұрын

  Change the gearbox oil..in this mileage..it's a must.

• 
  @jobathano16602 ай бұрын

  Yes, I have done it earlier.

• 
  @Jonjs992 ай бұрын

  Thats not a rust, lol

• 
  @jobathano16602 ай бұрын

  What would you call it then?

• 
  @Jonjs992 ай бұрын

  @@jobathano1660 why you peaple look on outside all the time? fenders and all visible body most is esay repleceable, you fight for few rust bublles, in reality underside can be completly rotten breaking car in half while visible pristine. that rust is nothing

• 
  @nino_kO12 ай бұрын

  Never got flashed in my s60 2021 with active high beam assist, i think it works fine

• 
  @jobathano16602 ай бұрын

  I think drivers have gotten more used to it or lights like this. In 2016 a lot of people would flash because it maybe looked stronger, even though not blinding like with a regular highbeam :)

• 
  @itstartsmedia2 ай бұрын

  Thanks! Looks like theres not much 2ohm options...

• 
  @jobathano16602 ай бұрын

  No not many, but last time I was looking into it I could not find any. So seems to be some ok options now :)

• 
  @onesikm33 ай бұрын

  Are these illuminating the floor as well ? I don’t want that

• 
  @jobathano16602 ай бұрын

  Yes they do, not really tried any modern led bulb that is weak. But this is not overly bright like many bulbs.

• 
  @onesikm32 ай бұрын

  @@jobathano1660thanks for your reply and honesty! Well I’ve been on an led frennzzyy to say the least lately and I’ve found some interesting option and uses for them. My primary reason for even wanting to replace my license plates lights was because I have a sound system which draws a lot of power and causes dimming of all the lights and it’s a visual eye sore especially at night time. How I found to counter act this problem and mask the issue is by implementing the use of led bulbs in place of the Oem halogen . But not just any ordinary led, this includes osram& Philips, they are insignificant for my purpose, which is sad since they do provide some of the cleanest warm color temperatures that I’m after without being overly bright, which is the opposite of what most people seem to be after lol. I hate the super bright led look especially in a future classic car that never had any such equipment! The problem i found in my testing this last week with osram/philips bulbs was they are lacking the fundamental component inside them which a lot of other cheapo led bulbs actually do come with, I was just as surprised as you might be once you are made aware of this, they don’t have what’s called an “ Ic “. This ic is basically a current regulator chip that works on a wide range of voltages spanning from like 6volts-24volts. What it means is the light bulbs light output remains constant no matter if you are supplying it with 12v or 24v. These types of bulbs are perfect for what i was after. The only issue with them is they are extremely bright so what I did is basically point it 180degree in the opposite direction to where the heat sink is nearly pointing toward the ground in the case of the license plate lights and I’m able to achieve a near perfect illumination😁 actually depending on how much I rotate the bulb in the housing gives me a large window of output to set it at. And with meter I’ve actually set them to be just a tad dimmer than what the halogen bulbs were outputting so that way the copper got to really squint to read my plates or that Karen who’s trying to see me behind bars 😂 sorry this was so long but it could help someone who sits thru this mumbojumbo as I wish i had someone tell me this sooner I could have saved a month of trials* and tribulations 😂😂😂😂

• 
  @jobathano16602 ай бұрын

  Yes I get your point. There is a point where leds started to get too bright, applies to headlight bulbs as well. I don’t like them too bright either. Bulbs with a constant current regulator is better, as you say the output stays the same :) I think it will make the led last longer, but I guess rest of the components die first instead.

• 
  @KarlUKmidlands3 ай бұрын

  Nice review, these seem a good choice for simple install from a well established brand - in the UK some MOT stations are failing LED replacements and forcing you back to old xenon to pass the headlight test

• 
  @jobathano16602 ай бұрын

  Yes, they are good for what they are and price. I always just change before inspection :)

• 
  @ComradeUraniumАй бұрын

  But isn't an aftermarket xenon a fail too?

• 
  @MowSow3 ай бұрын

  Can you test this with clear PPF. I want to know how much reduction in brightness can it cause !?

• 
  @jobathano16602 ай бұрын

  Yes I want to try that.

• 
  @MowSow2 ай бұрын

  If you’re going to do that, keep in mind that it’s recommended to choose high-quality film with self-healing properties and to have it installed by a professional to ensure it’s applied without bubbles or wrinkles that could affect light transmission, in order for your experiment to be fair.

• 
  @Lurrkeen3 ай бұрын

  is it rca cables that goes from high low converter back to the amplifier?

• 
  @jobathano16602 ай бұрын

  Yes.

• 
  @jonathanscheurich3 ай бұрын

  What's your experience one year later? Did it last? Any tearing?

• 
  @jobathano16603 ай бұрын

  I have not used it to much because of engine problems, so not so much mechanical wear. But put the boat back in today, still looks like when it was installed.

• 
  @jrh863 ай бұрын

  Thank you from 🇬🇧

• 
  @KOTDPR3 ай бұрын

  Привет из Москвы. На f40 opel insignia подойдëт этот ремкомплект?

• 
  @jobathano16602 ай бұрын

  Yes I think so.

• 
  @mrm42383 ай бұрын

  Very suspicious. How do you get perfectly rounded bulks that would precisely fit the plastic components.🤔 Did he hammer in the bulks just to test the product.🤔

• 
  @jobathano16602 ай бұрын

  Bought the car like that, probably parked in a small garage or something.

• 
  @MrCobrahoes3 ай бұрын

  Slecht uitgelegd mist de helft.

• 
  @marijnhuizing5138Күн бұрын

  de origineel nederlandse autos hebben die lampjes niet. mogelijk zit er een andere kabelboom bij en kun je deze dus niet werkend krijgen. heeft iets met wetgeving te maken.

• 
  @tedkurmaku48443 ай бұрын

  Bro what a nice idea to make the electric seats work, i never thought of that :D

• 
  @BoRag703 ай бұрын

  So if I only replace the low beam bulbs to LED I dont need to wire them through a relay or a resistor? Im quite satisfied with the highbeam but the lowbeam is very poor.

• 
  @lnv52383 ай бұрын

  Had the exact same problem with mine. Had to install new weather seals. This is definitely another option

• 
  @KyriakosKor3 ай бұрын

  Hello, is it possible to get some dimensions? Just below the LED where the cooling is located, what is the diameter and length of the cooling?

• 
  @maowing3714 ай бұрын

  hi I was Wondering I've a Saab 9.3 linear and I want to add the speakers into the doors on the front So I Bought the amp1 under the sete and installed 2 new speakers but its not Working and I see that I need to run a kabel from AMP1 to the Radio untie could you maybe in the future show how its done? :)

• 
  @xsam86614 ай бұрын

  Hovr kan jeg kjøpe den lys

• 
  @TheMrHudsonGuy4 ай бұрын

  I bought h7 osram night breaker led for my car equiped with depo projector headlights paid 100 euro for led but it was dimmer than halogen 60% bad to bring back halogen also paid 90 euro for philips pro6000 h7 led also dimmer like osram i was very dissapointed i trew my money away do you have any recommendations for me thanks

• 
  @TheMrHudsonGuy4 ай бұрын

  The headlights are brand new is this problem with headlights newer model or bulbs thanks

• 
  @jobathano16604 ай бұрын

  What kind of car is it?

• 
  @TheMrHudsonGuy4 ай бұрын

  @@jobathano1660 golf 4 depo projector headlights brand new

• 
  @TheMrHudsonGuy4 ай бұрын

  Golf 4​@@jobathano1660

• 
  @TheMrHudsonGuy4 ай бұрын

  @@jobathano1660 golf 4 sir

• 
  @maximghazal4 ай бұрын

  I've been waiting for months now to see an honest and thorough review like this one. Thank you for uploading this video, very informative and entertaining!

• 
  @jobathano16604 ай бұрын

  Thanks, no problem. I just find these things interesting for some reason :)

• 
  @turbone60284 ай бұрын

  Cool! Never heard of these, I see this could be useful in places that are quite foggy.

• 
  @jobathano16604 ай бұрын

  My Saab never breaks down, but for people with other cars this is a must ;)

• 
  @oskarkling6814 ай бұрын

  Did you disconnect the Ac lines? If you did what did you have to do to Make it work again

• 
  @jobathano16604 ай бұрын

  No I did not, just loosened the radiator and condenser from the mounts to get more room, so the lines for the ac was still connected. So my ac still works.

• 
  @turbone60284 ай бұрын

  Looks really great and they make your car look much more modern 👍👍😎

• 
  @jobathano16604 ай бұрын

  Yes looks good with white light :) just installed the incandescent for the video, this car have never seen incandescent bulbs 😅

• 
  @moloreanm16574 ай бұрын

  Compatible with Can bus? Do they flickr?

• 
  @jobathano16604 ай бұрын

  Then you need an extra canbus adapter in between. Or do you have a Saab?

• 
  @Aero934 ай бұрын

  ​@@jobathano1660I got 03 9-3 Aero with xenon lights, will this led flicker when car is off or no, or I have to ad an adapter or something?

• 
  @jobathano16604 ай бұрын

  The best option is to delete the bulb watch system with software, but it costs around 100$. Either from speedparts or maptun. But it’s the only good solution on these cars.

• 
  @a.j.vanderkolk32384 ай бұрын

  Thnx. Can you show how exactly the cables are connected and what is already installed in the 9.3 II?

• 
  @jobathano16604 ай бұрын

  Yes I could have filmed it better. Basically you have a wire harness in your door, for speakers, window controls etc. if you don’t have these lights, you have a extra connector not connected to anything on the passenger side, you just plug the harness add-on into that connector. On the driver side, you have an add-on harness connected into that connector, because it goes to the door lock switch. But there is no loop and connector for the light, so you need to swap it with the new one. If confused, you will see it directly when taking it apart.

• 
  @a.j.vanderkolk32384 ай бұрын

  Just learning by doing. Tack så mycke. Hej do.@@jobathano1660

• 
  @kwinciolrozrubq4 ай бұрын

  😢

• 
  @romanrudenko16144 ай бұрын

  Thank you for info man ! Im checking Hedemora delplocken few times in year but its ultra poore , we have only 1 saab last year . If you have some knowlage about front shoks ( Stötdämparsats) i will be appriciate if you can reccomend something , brend etc. P.S.I born in Ukraine , last 7 years im work in Sweden , huge Saab fan . Mvh.

• 
  @jobathano16604 ай бұрын

  Yes it seems to be better here on the west coast, Alingsås, Falkenberg and Helsingborg. I don’t know about any other self service junkyards in Sweden, but I like Delplocken, good prices. It depends on what you want to do with your car I guess, but if you are not changing ride height, I think many recommend Sachs, and I think they are the OEM replacement.

• 
  @LordToxygene4 ай бұрын

  Now this is a proper comparison.

• 
  @MuzykMuzykant4 ай бұрын

  what is the vacuum pressure on the new pump?

• 
  @jobathano16604 ай бұрын

  I have not tested actual vacuum, there was not a problem with the old one. Both creates suction when you put your finger to it.

• 
  @Jotlag5 ай бұрын

  A pitty that you do not show how you put the shock absorber on the bracket again. That is the difficult part

• 
  @eddiesugar15 ай бұрын

  They replaced the entire air shock, wonder if they can repair it instead of replacing?