I have FISKARS nippers (wire cutters) that my wife used when she worked at a place that built circuit boards and they work great and I also have some that I bought at Walmart that come to a point Model 170 for $5.79 and a pair Dorman 90704 Micro wire cutter for $13.94 and they work just fine. I use the $5.79 more then the others.
@colinmurphy525Ай бұрын
I’m just getting back into modeling this year. While mini art makes some great sets. They are not meant for beginners! The panzer IV kit I just finished. Came missing pages that I had to find online. Then during assembly, ran into numerous issues with the build order as written. Very frustrating at first, but as another commenter said. They relocated from Eastern Ukraine to Poland due to “cough” reasons. All in all I’m going to start smaller for now. Though I’ll be stocking up on more of their products. If only to support the company.
@ProfessorTrain743Ай бұрын
Very nice review, good information.
@allgood6760Ай бұрын
Lethal! 👍
@jcwoodman5285Ай бұрын
Cool! I just ordered this one from Amazon for $85. I was planning on a 270 but decided to go with the trigger as my last big build led to hand cramps😊
@c123bthunderpigАй бұрын
Priced to high for what you get, not worth investing in.
@allgood6760Ай бұрын
Thanks for this 👍
@fredmackay78962 ай бұрын
Nice review!
@jantztim2 ай бұрын
Great camo, question, do you remember wich brown you used for the brown camo?😁
@jantztim2 ай бұрын
Great paint jon, question, wich color did you use for the brown camo?
@donlunn7922 ай бұрын
As a new Modeller,I find that the issue of Air brushes is just a minefield. I tend to be a person who thinks that everything I build could have been built better. Perfection is almost unattainable. I have absolutely no idea as to which airbrush would suit me. And that is after looking at loads of vids on this subject.
@samhei032 ай бұрын
@29:11, haha. I can read these chinese introduction, they are not written with complete sentence too.
@stephenashley84313 ай бұрын
Could you Post a Link For the blueprints you mentioned PLEASE ?
@stephenashley84313 ай бұрын
Dont Like IT, i will BE buying the one from Galaxy Tools !!!
@WhiteDragon6893 ай бұрын
I bought a GHAD-39 from amazon for $30. I took it apart, cleaned it, polished the needle and had a hell of a time with the Lever Guide placing it back. It took me almost an hour of frustration and I nearly threw it in the trash! The problem with Chinese things is their infernal cost cutting at all phases of manufacturing. They are really good at making something look good on the outside but the internals are made of tofu dregs (trash). It is a functional piece but an Iwata or H&S brush it is not due to lack of strict quality control. If i was Gaahleri, I would have them built someplace else.or buy a different brand.
@jonathanvl11604 ай бұрын
Does anyone know what type of thread is used for the paint cups? I was wondering if I could use a different paint cup
@dosdont4 ай бұрын
That airbrush looks like the older model not the sj93. Look at the gold, in fact look at the picture on the box and look at the airbrush you're using.
@weylandyutani66914 ай бұрын
in new to airbrushing and just bought one of these. Seems decent overall, I've only sprayed water through it so far to get used to it . . . but I have a problem. The nozzle piece remains stuck inside the nozzle cap for both 0.35 and 0.5 They will not come out of the nozzle cap. Any ideas how to separate them, which would be necessary for cleaning. Thanks for any advice
@landwand3 ай бұрын
Sounds like you have a flawed nozzle cap (pics or vid would help). Contact their customer service.
@WhiteDragon6893 ай бұрын
Get a hold of their customer service dept. Apparently there are quality problems that they will take care of easily. I bought a Moebius 0.2 for $65 from Gaahleri directly and during inspection the needle tip was bent. I e-mailed them and they sent a replacement needle. I can't believe that at their top tiered product line such an obvious defect was not caught. The Chinese are experts at cutting corners to save a yen. Just beware. If you get a functional piece, its not so bad for the price but its a show stopper. Gaahleri should get out of China and make them elsewhere.
@stephenashley84314 ай бұрын
Academy Kit has better Details, but this one has wayyy better exhaust nozzles!!!!
@williamfotiou75774 ай бұрын
Good review, thank you.
@KANIVERSE4 ай бұрын
Is the needle regular size if i need to replace it?
@user-tr6kh6ur5c4 ай бұрын
Thanks for the review. As a total novice I treated myself to this model for Christmas and I’m just sorting things out to start on the journey. I can confirm they no longer add the pseudo test sheet into the box, so they must have listened. Thanks again
@Trantor.Citizen4 ай бұрын
I have top notch airbrushes, but I already ordered my second Chinese airbrush. They are awesome and much cheaper!
@musoseven82184 ай бұрын
Great review and thoughtful, insightful comments👍👍💜✌️😊 I use Harder and Steenbeck airbrushes, occasionally Paasche and Sparmax too. Ive been offered one of these airbrushes very cheaply priced. But even as a back up, or primer airbrush, would I be better off using that money towards an alloy 2024, Evolution or Infinity? That way I have quality primer, quality base coat, quality detailing and quality weathering with an airbrush for each phase. Most of my models, which are few and far between, are larger scale, and cost more, paint finish is VERY noticeable. Something to ponder🤔
@evgeniy41455 ай бұрын
Дуже гарний літак вийшов!
@christophearbus35235 ай бұрын
I bought 2 different models of DSPIAE to compare, because they looked like similar (and they are, only accessories change), and there is the same issue with both of them: the blade stay stuck in the plastic it 90% of the time, despite it is fully cut. It requires forcing to release them, it's super annoying. A solution to prevent that is to push with the flat side before snipping, but's it does not working all the time. I don't want to use them anymore because of that, but that's the best ones I found to cut plastic...
@camillesecondary36665 ай бұрын
Masterclass!
@danh481765 ай бұрын
Every other unboxing video shows exactly the same "Test Sample". It's almost certainly a copy. kzread.info/dash/bejne/eY2myNNppsSyndo.html kzread.info/dash/bejne/e5OAqNGjZ6nOoNY.html Thank you for posting a review that sets realistic expectations of this air brush - it's a good value but not as fantastic as some other reviewers seem to think.
@musoseven82184 ай бұрын
I agree - it's a great review 👍💜✌️😊
@WhiteDragon6893 ай бұрын
My GHAD-39 did not come with such a fake test card. I would be insulted. Typical Chinese fakery and corner cutting to save a yen. But set your expectations right or bite the bullet and get an airbrush from Harder and Steenbeck Ultra 2024.
@marksixofone41045 ай бұрын
There is an adapter available to fit generic dremel shank sizes so buffing wheels, disc cutters etc can also be used, great little tool.
@DNModels5 ай бұрын
Thanks for sharing
@joemoore40275 ай бұрын
You should show what the different speeds are on plastic, slow up to fast speeds and how they grind. Please give the size of the shanks of the cutters / grinders, 1/8" inch or 7/32 " inch in Imperial size ( USA ) . If the tool can't be slowed down enough it will just melt the plastic or be too hard to control for fine work.
@DNModels5 ай бұрын
It is very powerful, but no, it won't melt the plastic. The sizes that you might need are seen on the back of the cover, which you can check pausing the video. The rest hasn't been measured and even if it was, it wouldn't be in imperial size. Slowing it down will beat the purpose to some extent. That was the reason I mentioned the nail polisher. If you want slower and more gentle tool, that is your course of action.
@pawpawstew5 ай бұрын
That seems like a handy tool, but I have to say that I'm disappointed they didn't make it with a universal standard three-jaw chuck so that other size bits may be used. Thanks for taking the time to review it. 👍
@DNModels5 ай бұрын
Great point!
@kudukilla6 ай бұрын
Working on the Hobby Boss A6-E non TRAM right now. I’ll warn you that closing the boarding ladder doors will take some work to get it even. I had to buy aftermarket Multiple Ejector Racks, and I’m 3D printing Mk-82 Snake-eye bombs. The loadout shown is just what you can do with what’s included in the kit. There are bigger loadouts possible in real life.
@mirrorblue1006 ай бұрын
Looks like a dandy kit - typical Tamiya. Nice review - thanks.
@nikolajc76176 ай бұрын
professionals do better with a Chinese cheap airbrush than a beginner do with the best Iwata. So it dont conclude anything about the performance.
@nikolajc76176 ай бұрын
You should first of all take off the needle cap and give the airbrush some more use before judging.
@raytheron6 ай бұрын
Super happy with mine! I bought the chrome-plated 9 cc cup as I find them easier to clean. This one has replaced my Iwata and I use it along with my Sparmax 0.2.
@malkontent216 ай бұрын
To nie jest banderowski pojazd, tylko rosyjski. Zatem banderowskie kamo jest nie na miejscu. WOŁYŃ PAMIĘTAMY.
@skyhigh11547 ай бұрын
Cheap stuff cheap results 😅😅😅
@Yardbird687 ай бұрын
Yes, the book is awesome, even though just as you, I cannot read it😆 But as the saying goes, A picture is worth a thousand words. Also, WWP ( Wing & Wheels Publications ) makes Su-25 Frogfoot "In Details", by the same author. Very good ALL in color photos of various plans, especially the Frog and the shark. But, the coolest thing are the up-close photos of all the various components of the plane. 179 pages and BEST of all, totally in English! Thank you for your quality video my friend! One more thing about the Frog, it is indeed at a museum, but displayed "outside", and the paint has really become faded.
@Yardbird687 ай бұрын
Supposedly, I heard that trumpeter was going to come out with one. On scalemates they have this info about a future release ( 2023 ) "Su-25 Frogfoot-A Trumpeter | No. 05836 | 1:48". Perhaps Kitty Hawks? Anyway, thanks for your review. I purchased the Eduard version and already have 3 Zvezda. Still toying with getting the 1/32 Trumpeter kit too.
@kamui0047 ай бұрын
KH would have been full of rivets, full of weapons sprues and every open panel. But as for accuracy, that's not something KH has done well over the years. If there are two kits available on the market, except for their Su-34, I'd chose any other brand. Compare their MiG-25 vs ICMs, yes ICM still has problems but it's much better kit and model than KH by a mile. KH Yak-130 wheel well is a flat box compared to the Zvezda that modelled the right contours following intake, also KH intake rear section end in boxy flat surfaces, not to mention the landing gear leg actuator placement and geometry are pure fantasy and never able to retract and their decal was full or errors, all warning and walkways were for one side, they made wrong duplicates decal without correct shape for other side. Their last straw were their flanker family, accuracy was decent, but bad kit design and released at a higher price than GWH kit they tried to compete.
@kaptkrunchfpv7 ай бұрын
I picked up this kit today, returning to the hobby after about two decades. Had never heard of Takom. havent started the build yet, but I am very impressed with the quality of the parts. I cant find a sign of flashing of any kind. Thanks for the review!
@TrasherBiner7 ай бұрын
7:30 you truly are throwing the cheap airbrush knockoff under the bus into a totally unrealistic situation that you will have to deal with anyway with any airbrush. I fail to see the point other than the confirmation bias egotrip of you want it to be crap compared to your IWATA CM-C that you spent so much money on...
@Kairasp17 ай бұрын
I like to buy one of this, what is the price ? where can I buy it from ? please tell me.
@DNModels7 ай бұрын
Check the links below the video.
@joseluiscastanorestrepo8 ай бұрын
Great tutorial, thanks. I just got the riveting tool and this video is very useful
@goforitpainting8 ай бұрын
Cool 👍
@goforitpainting8 ай бұрын
Really cool. I'm a new Sub
@DNModels8 ай бұрын
Thanks for the sub!
@jdxah8 ай бұрын
I’m glad you pointed out the “test” spray pattern cards are fake because when I received a replacement for a different model, call me gullible, but I was shocked when the two cards matched exactly. I still bought this model and I do like it.
Пікірлер
Your awesome
What PSI were you set at?
I have FISKARS nippers (wire cutters) that my wife used when she worked at a place that built circuit boards and they work great and I also have some that I bought at Walmart that come to a point Model 170 for $5.79 and a pair Dorman 90704 Micro wire cutter for $13.94 and they work just fine. I use the $5.79 more then the others.
I’m just getting back into modeling this year. While mini art makes some great sets. They are not meant for beginners! The panzer IV kit I just finished. Came missing pages that I had to find online. Then during assembly, ran into numerous issues with the build order as written. Very frustrating at first, but as another commenter said. They relocated from Eastern Ukraine to Poland due to “cough” reasons. All in all I’m going to start smaller for now. Though I’ll be stocking up on more of their products. If only to support the company.
Very nice review, good information.
Lethal! 👍
Cool! I just ordered this one from Amazon for $85. I was planning on a 270 but decided to go with the trigger as my last big build led to hand cramps😊
Priced to high for what you get, not worth investing in.
Thanks for this 👍
Nice review!
Great camo, question, do you remember wich brown you used for the brown camo?😁
Great paint jon, question, wich color did you use for the brown camo?
As a new Modeller,I find that the issue of Air brushes is just a minefield. I tend to be a person who thinks that everything I build could have been built better. Perfection is almost unattainable. I have absolutely no idea as to which airbrush would suit me. And that is after looking at loads of vids on this subject.
@29:11, haha. I can read these chinese introduction, they are not written with complete sentence too.
Could you Post a Link For the blueprints you mentioned PLEASE ?
Dont Like IT, i will BE buying the one from Galaxy Tools !!!
I bought a GHAD-39 from amazon for $30. I took it apart, cleaned it, polished the needle and had a hell of a time with the Lever Guide placing it back. It took me almost an hour of frustration and I nearly threw it in the trash! The problem with Chinese things is their infernal cost cutting at all phases of manufacturing. They are really good at making something look good on the outside but the internals are made of tofu dregs (trash). It is a functional piece but an Iwata or H&S brush it is not due to lack of strict quality control. If i was Gaahleri, I would have them built someplace else.or buy a different brand.
Does anyone know what type of thread is used for the paint cups? I was wondering if I could use a different paint cup
That airbrush looks like the older model not the sj93. Look at the gold, in fact look at the picture on the box and look at the airbrush you're using.
in new to airbrushing and just bought one of these. Seems decent overall, I've only sprayed water through it so far to get used to it . . . but I have a problem. The nozzle piece remains stuck inside the nozzle cap for both 0.35 and 0.5 They will not come out of the nozzle cap. Any ideas how to separate them, which would be necessary for cleaning. Thanks for any advice
Sounds like you have a flawed nozzle cap (pics or vid would help). Contact their customer service.
Get a hold of their customer service dept. Apparently there are quality problems that they will take care of easily. I bought a Moebius 0.2 for $65 from Gaahleri directly and during inspection the needle tip was bent. I e-mailed them and they sent a replacement needle. I can't believe that at their top tiered product line such an obvious defect was not caught. The Chinese are experts at cutting corners to save a yen. Just beware. If you get a functional piece, its not so bad for the price but its a show stopper. Gaahleri should get out of China and make them elsewhere.
Academy Kit has better Details, but this one has wayyy better exhaust nozzles!!!!
Good review, thank you.
Is the needle regular size if i need to replace it?
Thanks for the review. As a total novice I treated myself to this model for Christmas and I’m just sorting things out to start on the journey. I can confirm they no longer add the pseudo test sheet into the box, so they must have listened. Thanks again
I have top notch airbrushes, but I already ordered my second Chinese airbrush. They are awesome and much cheaper!
Great review and thoughtful, insightful comments👍👍💜✌️😊 I use Harder and Steenbeck airbrushes, occasionally Paasche and Sparmax too. Ive been offered one of these airbrushes very cheaply priced. But even as a back up, or primer airbrush, would I be better off using that money towards an alloy 2024, Evolution or Infinity? That way I have quality primer, quality base coat, quality detailing and quality weathering with an airbrush for each phase. Most of my models, which are few and far between, are larger scale, and cost more, paint finish is VERY noticeable. Something to ponder🤔
Дуже гарний літак вийшов!
I bought 2 different models of DSPIAE to compare, because they looked like similar (and they are, only accessories change), and there is the same issue with both of them: the blade stay stuck in the plastic it 90% of the time, despite it is fully cut. It requires forcing to release them, it's super annoying. A solution to prevent that is to push with the flat side before snipping, but's it does not working all the time. I don't want to use them anymore because of that, but that's the best ones I found to cut plastic...
Masterclass!
Every other unboxing video shows exactly the same "Test Sample". It's almost certainly a copy. kzread.info/dash/bejne/eY2myNNppsSyndo.html kzread.info/dash/bejne/e5OAqNGjZ6nOoNY.html Thank you for posting a review that sets realistic expectations of this air brush - it's a good value but not as fantastic as some other reviewers seem to think.
I agree - it's a great review 👍💜✌️😊
My GHAD-39 did not come with such a fake test card. I would be insulted. Typical Chinese fakery and corner cutting to save a yen. But set your expectations right or bite the bullet and get an airbrush from Harder and Steenbeck Ultra 2024.
There is an adapter available to fit generic dremel shank sizes so buffing wheels, disc cutters etc can also be used, great little tool.
Thanks for sharing
You should show what the different speeds are on plastic, slow up to fast speeds and how they grind. Please give the size of the shanks of the cutters / grinders, 1/8" inch or 7/32 " inch in Imperial size ( USA ) . If the tool can't be slowed down enough it will just melt the plastic or be too hard to control for fine work.
It is very powerful, but no, it won't melt the plastic. The sizes that you might need are seen on the back of the cover, which you can check pausing the video. The rest hasn't been measured and even if it was, it wouldn't be in imperial size. Slowing it down will beat the purpose to some extent. That was the reason I mentioned the nail polisher. If you want slower and more gentle tool, that is your course of action.
That seems like a handy tool, but I have to say that I'm disappointed they didn't make it with a universal standard three-jaw chuck so that other size bits may be used. Thanks for taking the time to review it. 👍
Great point!
Working on the Hobby Boss A6-E non TRAM right now. I’ll warn you that closing the boarding ladder doors will take some work to get it even. I had to buy aftermarket Multiple Ejector Racks, and I’m 3D printing Mk-82 Snake-eye bombs. The loadout shown is just what you can do with what’s included in the kit. There are bigger loadouts possible in real life.
Looks like a dandy kit - typical Tamiya. Nice review - thanks.
professionals do better with a Chinese cheap airbrush than a beginner do with the best Iwata. So it dont conclude anything about the performance.
You should first of all take off the needle cap and give the airbrush some more use before judging.
Super happy with mine! I bought the chrome-plated 9 cc cup as I find them easier to clean. This one has replaced my Iwata and I use it along with my Sparmax 0.2.
To nie jest banderowski pojazd, tylko rosyjski. Zatem banderowskie kamo jest nie na miejscu. WOŁYŃ PAMIĘTAMY.
Cheap stuff cheap results 😅😅😅
Yes, the book is awesome, even though just as you, I cannot read it😆 But as the saying goes, A picture is worth a thousand words. Also, WWP ( Wing & Wheels Publications ) makes Su-25 Frogfoot "In Details", by the same author. Very good ALL in color photos of various plans, especially the Frog and the shark. But, the coolest thing are the up-close photos of all the various components of the plane. 179 pages and BEST of all, totally in English! Thank you for your quality video my friend! One more thing about the Frog, it is indeed at a museum, but displayed "outside", and the paint has really become faded.
Supposedly, I heard that trumpeter was going to come out with one. On scalemates they have this info about a future release ( 2023 ) "Su-25 Frogfoot-A Trumpeter | No. 05836 | 1:48". Perhaps Kitty Hawks? Anyway, thanks for your review. I purchased the Eduard version and already have 3 Zvezda. Still toying with getting the 1/32 Trumpeter kit too.
KH would have been full of rivets, full of weapons sprues and every open panel. But as for accuracy, that's not something KH has done well over the years. If there are two kits available on the market, except for their Su-34, I'd chose any other brand. Compare their MiG-25 vs ICMs, yes ICM still has problems but it's much better kit and model than KH by a mile. KH Yak-130 wheel well is a flat box compared to the Zvezda that modelled the right contours following intake, also KH intake rear section end in boxy flat surfaces, not to mention the landing gear leg actuator placement and geometry are pure fantasy and never able to retract and their decal was full or errors, all warning and walkways were for one side, they made wrong duplicates decal without correct shape for other side. Their last straw were their flanker family, accuracy was decent, but bad kit design and released at a higher price than GWH kit they tried to compete.
I picked up this kit today, returning to the hobby after about two decades. Had never heard of Takom. havent started the build yet, but I am very impressed with the quality of the parts. I cant find a sign of flashing of any kind. Thanks for the review!
7:30 you truly are throwing the cheap airbrush knockoff under the bus into a totally unrealistic situation that you will have to deal with anyway with any airbrush. I fail to see the point other than the confirmation bias egotrip of you want it to be crap compared to your IWATA CM-C that you spent so much money on...
I like to buy one of this, what is the price ? where can I buy it from ? please tell me.
Check the links below the video.
Great tutorial, thanks. I just got the riveting tool and this video is very useful
Cool 👍
Really cool. I'm a new Sub
Thanks for the sub!
I’m glad you pointed out the “test” spray pattern cards are fake because when I received a replacement for a different model, call me gullible, but I was shocked when the two cards matched exactly. I still bought this model and I do like it.