Пікірлер

• 
  @erichopken763822 күн бұрын

  So much easier just remove the grille and all the bolts for the most part are right there

• 
  @devanpederson81812 ай бұрын

  Congratulations! I could watch this on a loop all day. 😂

• 
  @johnulmer16222 ай бұрын

  A true beast. Nice driving.

• 
  @exiteternium2 ай бұрын

  that's not Turner bro.. looks more like the early VRSF street catback. turner stays dual..

• 
  @2004dsgmach12 ай бұрын

  Muffler has Turner etched in it.. It was still dual all the way to Muffler.. Appreciate the comment.. ..

• 
  @MISTAFOUROEIGHT2 ай бұрын

  How did u put the plastic on top of bumper my shyt new and I can't do it

• 
  @8AgEnToChO84 ай бұрын

  Where did you purchase this

• 
  @TrackM25 ай бұрын

  Holy..

• 
  @noobslayer8157 ай бұрын

  Stock suspension?

• 
  @2004dsgmach17 ай бұрын

  Camber plates only on bone stock Comp package

• 
  @everss027 ай бұрын

  no chicane after the straight???

• 
  @2004dsgmach17 ай бұрын

  Blocked off that day, better without it

• 
  @everss027 ай бұрын

  I like it, makes it more challenging, in a car with all that weight I can see not liking it.@@2004dsgmach1

• 
  @F1fanatic218 ай бұрын

  Aero balance looks good, nice lap.

• 
  @oscar.v58599 ай бұрын

  The track that holds the glass fell off the scissors axle should I get a new track

• 
  @mrpremier4bbg9 ай бұрын

  That glue will fail !

• 
  @TheVIKINGfarm10 ай бұрын

  Haulin the mail!!! Nice work!!!

• 
  @shayanns8 Жыл бұрын

  What tools did you use

• 
  @sartainja Жыл бұрын

  Nice to watch a video and the truck not be a rust bucket or a mud hole.

• 
  @keanar2054 Жыл бұрын

  Same exact thing happened to my 02 but my bump stop is also filled with broken glass from the last window that broke. Any tips on how to get the glue and glass out of the track piece??

• 
  @keanar2054 Жыл бұрын

  I pried all of the glass out and it’s good as new

• 
  @camden4469 Жыл бұрын

  get him some brand new rock auto headlights😎cheap and easy way to make it look newer/better

• 
  @reid1boys Жыл бұрын

  Couple words of advice, after doing this job. That first piece of plastic trim that he doesnt show you removing.... he just said pull it out.... uhm, no. If you just pull it out straight, you will break off every tab on that plastic piece that connects into the bumper. You need to put one hand up inside the bumper, feel that tab and push it up while pulling back to ensure you dont break the tabs. Next..... GET AN ELECTRIC RATCHET!!! I can not stress this point enough. Im 53, finally got one 3 years ago and it is the single best investment in a tool of my lifetime. All that fidgeting you see with a ratchet in this video disappears with an electric ratchet. Spend the 30 or 40 bucks.... trust me, I promise you will be thanking me. Good video, I appreciate it.

• 
  @NB-xf8ge Жыл бұрын

  100% right I did that with mine and had to get creative. I didnt do that from watching this video. It felt like it was pressure tabs as they popped 1 by 1 😂

• 
  @anthonyr.beltran816 Жыл бұрын

  Great video

• 
  @MrCanes954 Жыл бұрын

  What is the part name for the 15mm bolts? I'm missing a few.

• 
  @TrackM2 Жыл бұрын

  1st place and this was ur first time @RA?!!!! 🎉🎉🎉🎉

• 
  @beathaknockturnal8555 Жыл бұрын

  Great video! Thank you so much for this. Without delving into the comments, where did you order the new bumper form?

• 
  @2004dsgmach1 Жыл бұрын

  My grandfather ordered it so honestly no idea

• 
  @colingoss6468 Жыл бұрын

  Awesome run. Is your M3 manual or DCT?

• 
  @2004dsgmach1 Жыл бұрын

  6speed Manual

• 
  @lougigliotti6452 Жыл бұрын

  Don’t forget to tell Sewell about the track. 👍

• 
  @JerryCecco Жыл бұрын

  Was this video taken @ G2 on Saturday May 20th? I drove by and saw a bunch of cars. I had no time to stop by. please share details of the event 🙂

• 
  @2004dsgmach1 Жыл бұрын

  Yes, private day and I was instructing. Contact G2 Motorsports park for details on next one.

• 
  @lougigliotti6452 Жыл бұрын

  Great laps.

• 
  @fostersteward3838 Жыл бұрын

  Good video, it helped me get ready to replace the bumper on my Silverado. Your grandpa did his part to he looked like he could of did it all on his own if he needed to but its nice that you helped him out with it.

• 
  @luissayeg3190 Жыл бұрын

  The how to on the lower plastic for the bumper those clips are killer thank you for this video !!!

• 
  @mpzay62 Жыл бұрын

  Hey great video jus curious i went to salvage yard and pulled a bumper from a silvrado jus like yours today will it fit my 2003 or do i have to modify

• 
  @2004dsgmach1 Жыл бұрын

  Honestly not 100% sure. In my research years ago 2000-2006 were all the same

• 
  @thearmorychurch_Pontiac Жыл бұрын

  It would be good to mention that if you're just going to pull straight back on that front plastic you're going to break it

• 
  @Daviddear30 Жыл бұрын

  Can the top black trim piece be removed and replaced with the bumper on the truck? It appears so in the end of the video. Thanks!

• 
  @2004dsgmach1 Жыл бұрын

  Yes

• 
  @johnulmer1622 Жыл бұрын

  Wow.....THAT was fast.

• 
  @ShelbyFlyer Жыл бұрын

  Fantastic! 🤟

• 
  @Racer_Mike87 Жыл бұрын

  Great job congrats. Still running the slicks?

• 
  @2004dsgmach1 Жыл бұрын

  Yep, Pirelli scrubs

• 
  @breakmywalletmotorsport Жыл бұрын

  Beast! I like how you drove through 7-8…I always describe that part as confusing 😂 And Congrats!

• 
  @RIDEOUT68 Жыл бұрын

  Why did u lay the new chrome bumper face down on the concrete?😢👀🤦🏽‍♂️

• 
  @logut80 Жыл бұрын

  Is it an Eaton swap on Mach1 engine?? I was hoping a port job to that extent would be more than a 2-3mph gain. My friends 04 mystichrome went 11.70@117 with stock blower & 2.76 upper/stock lower.

• 
  @2004dsgmach1 Жыл бұрын

  Yes Eaton swap on Mach 1 motor. I think the majority or “gains” with porting is the efficiency of airflow. Obviously the blower is the same size still but now flows more efficiently, more efficient equals less heat, less heat more reliable power yada yada. I’m a dummy and could be completely wrong tho. There’s also a lot of variables to this, your buddy probably had a much better 60ft, less worn out stock diff, left harder, better 1st gear compared to mach1, etc.

• 
  @logut80 Жыл бұрын

  @2004dsgmach1 yeah, his cobra only had 30k miles at the time so it wasn't spinning 1 wheel and he had Nitto's on the factory wheels.

• 
  @TrackM2 Жыл бұрын

  whoa... with detuned to 318hp!

• 
  @breakmywalletmotorsport Жыл бұрын

  Badass!👍

• 
  @terryfair7713 Жыл бұрын

  Solid lap!

• 
  @paulryan920 Жыл бұрын

  What tires are you using?

• 
  @2004dsgmach1 Жыл бұрын

  305 pirelli scrubs

• 
  @mra95662 Жыл бұрын

  I hit a deer and my bumper is bent down the same way. do you have a bracket straightening video?

• 
  @aidantanny7230 Жыл бұрын

  I ran into the back of a Chrysler 300 with my GMT800 Suburban. They cut me off and I didn't have time to brake, my bumper looks very similar to this but it is still lined up straight. Truly solid trucks

• 
  @MexicanMovie Жыл бұрын

  Great driving, i took some drivers ed courses with the Porsche Club years ago in my younger days and that's not as easy as people might think when going that fast.

• 
  @djeroctx Жыл бұрын

  Great work sir. Flying.

• 
  @quikagc5 Жыл бұрын

  You’re a maniac! Awesome lap! Wow!

• 
  @Racer_Mike87 Жыл бұрын

  Congrats! Amazing lap

• 
  @leogonzalez1998 Жыл бұрын

  I struggled so much getting the black piece back on like 3 clips broke🥲🥲🥲 anyone have any suggestions to make it easier

• 
  @pab3783 Жыл бұрын

  Great learning video. The throttle bar helps a lot to understand how the car is being driven.

• 
  @TheVIKINGfarm Жыл бұрын

  Straight up slayed it!! Beautiful! Saved and studying for later. Love that entry into Rattlesnake! Great work!