Пікірлер

• 
  @ThriveTalesTVКүн бұрын

  Good one

• 
  @udoubuilder4823Күн бұрын

  ty

• 
  @ThriveTalesTV9 күн бұрын

  Like . very informative

• 
  @udoubuilder48239 күн бұрын

  Ty.?was sound better...?

• 
  @ThriveTalesTV9 күн бұрын

  @@udoubuilder4823 yes much better . thank you

• 
  @ThriveTalesTV12 күн бұрын

  sound is very bad man .. but like anyways . very informative .

• 
  @udoubuilder482312 күн бұрын

  Thanks for feedback and comment I think the room was abit echoey

• 
  @qadeerhussain575119 күн бұрын

  Thank you for your valuable time and effort in making this useful video

• 
  @udoubuilder482319 күн бұрын

  Ty m8

• 
  @qadeerhussain575119 күн бұрын

  Excellent video

• 
  @udoubuilder482319 күн бұрын

  Thank you very much!

• 
  @markdyballuk22 күн бұрын

  just spent today taking some coving down! the circles of life 😂

• 
  @wotviewer25 күн бұрын

  don't give up the day job when it comes to video production.

• 
  @udoubuilder482325 күн бұрын

  Lol cheers

• 
  @cannontrodder29 күн бұрын

  You are left handed, go right to left. The heel on your trowel will cover up likes as you go.

• 
  @udoubuilder482329 күн бұрын

  Cheer m8 I know I'm all over the place ty

• 
  @ThriveTalesTVАй бұрын

  like .very informative

• 
  @Joe-jv5mmАй бұрын

  ❤ doing the Hammer Tap tests on old Properties, 💷💷💷 in the Bank. Builders Gold

• 
  @udoubuilder4823Ай бұрын

  She's was a relative lol no gold was exchanged

• 
  @MikeKeel2 ай бұрын

  As a tiler, it looks pretty good to me in 'setting out', i.e. It's all lining up and square. My only advice is to have a clean bucket of water with a sponge handy at all times. You need to clean the joints as you go otherwise you'll be scraping out the dried up adhesive. Well done though!!

• 
  @udoubuilder48232 ай бұрын

  Cheers m8 believe or not I've gone through a dozen of them lol

• 
  @EscapeToTheDreamHouseUK2 ай бұрын

  I like that. You got the job to do my dream house 😉🍻

• 
  @udoubuilder48232 ай бұрын

  Yer sadly she past away..done the whole house up.took about six month's. Just when I finished.she was gone

• 
  @EscapeToTheDreamHouseUK2 ай бұрын

  @@udoubuilder4823 what? Oh no that’s awful. No words. 😧

• 
  @djtaylorutube2 ай бұрын

  Colourclad sent me a couple of PDF's with all the specifications and fitting info. It takes a bit of understanding but it's all there. You didn't want 350mm barge boards, you needed mini-Z profile which is what they offered.

• 
  @udoubuilder48232 ай бұрын

  hi m8 just got message...i couldnt get on with the pdfs..my barge board were 200 by 150..the 150 was the facia and 200 was the top...the miniz worked a treat look up the guy..one hand craftman,,he had the barge boards that went over the roof ridges hope this helps

• 
  @udoubuilder48232 ай бұрын

  hand i craft thats hes utube channel

• 
  @earllll2 ай бұрын

  Wow looks great. Cool bathroom!

• 
  @udoubuilder48232 ай бұрын

  Ty m8

• 
  @davidvanvlerah78252 ай бұрын

  It appears from the look and from the difficulties that you were having that your mortar was very dry. You start with poor adhesion and it just goes downhill from there. I feel your pain. Tile work is tedious and relies on so many different factors. You keep saying you're not a tile guy, but your cuts are clean and your lines are level and square. I've seen pros do worse. I wasn't there, but it really appears that your mud was too dry. No offense, mate, but that is looking like one dreary room. I hope you are planning a very light grout to help it pop! Nice work. You should be proud of what you've shown us.

• 
  @udoubuilder48232 ай бұрын

  Ty m8 for your feedback The problem I had was too much paste I wanted the walls to be square and level. Once I started I couldn't stop myself As for the room looking dreary you could be right I'm just hoping the ceiling and rad wall bring it back... Check out the next room . I do... Bedroom.. I'm not having any say on it. Will be all my wife's ideas.... Lol Once again. Thanks for feedback

• 
  @6565tigga2 ай бұрын

  Don’t be to hard on yourself mate, it all looks good. Keep going 👍🏻

• 
  @udoubuilder48232 ай бұрын

  Cheers m8

• 
  @adriennejordan80283 ай бұрын

  P r o m o s m ☺️

• 
  @udoubuilder48233 ай бұрын

  What does that mean m8

• 
  @deanhider13 ай бұрын

  If you are going to tile it why bother plastering it the wall can hold more weight for tiles if not plastered

• 
  @udoubuilder48233 ай бұрын

  Hi m8 It improves water tightness Thx for Comment

• 
  @udoubuilder48233 ай бұрын

  Plus I'm going to water tank the walls

• 
  @carlwhitfield54633 ай бұрын

  Don't worry about the bargeboards bending it will happen it's the same as aircraft being riveted they do the same canning effect just means it's a good tight fit and secure

• 
  @udoubuilder48233 ай бұрын

  Cheers m8 I'm over it now lol

• 
  @HughHDS-PM-be4uh3 ай бұрын

  you dont know what your doing....amatuer

• 
  @Smart_fix4 ай бұрын

  I’ve installed few of them for my customers and they was so happy with results mate 👌🙂👍🏼

• 
  @udoubuilder48234 ай бұрын

  Yeah seems to be spot on Cheers m8

• 
  @garyl51284 ай бұрын

  Good job!

• 
  @garydouglass95774 ай бұрын

  Use just the sponge as I think the scrubbing brush has taken the cement out not the Dr Pepper. Great work your doing though. Keep pottering on.

• 
  @udoubuilder48234 ай бұрын

  Cheers m8 I'm thinking should of left a day more. Then used the sponge Plus it was still wet at the top and was very cold out Think wrong of year as well

• 
  @udoubuilder48234 ай бұрын

  Time

• 
  @peter-gn8ey4 ай бұрын

  poor choice of title my friend calling this "the right way". i'm a big fan of silicone profiles for siliconing; the idea being you get a nicely formed 45 degree slope which has two primary benefits, 1) the 45 degree slope sheds water better, and 2) there's more volume of silicone for a stronger joint. when you take your finger over it for a final pass you completely undo the work you've just done, 1) the joint is now concave with a lot less cross-sectional area, 2) it's much more likely to hold pockets of water which will quickly go black as bacteria grows. lastly, the soapy water is compromising your silicone before it has a chance to form... you've sprayed it onto the wall and counter immediately next to the nicely formed silicone and then squeezed the silicone out and onto it with your finger meaning it is now touching a surface it is less likely to adhere to. yes it means the silicone doesn't stick to your finger as much but again you shouldn't be using your finger in the first place. a quick once over with IPA before you start will also improve the adhesion. forgive the diatribe, I wasn't searching for this video but youtube loaded it for me and thought I'd share. nice tiling though.

• 
  @udoubuilder48234 ай бұрын

  Ty for coment Have you done any videos on this subject. Of have you got a link to a good video on subject What's ipa When I sprayed the water it was a very very very fine mist And when I apply my finger. I'm not applying any pressure I doubt if I'm even touching the silicone I appreciate ur feedback ty

• 
  @udoubuilder48234 ай бұрын

  Also is it click bait. Lol If ur titles boring Less clicks. Should have me wife doing it in skippy outfit would a thousand times more views

• 
  @udoubuilder48234 ай бұрын

  I also did the siliconing on that worktop about ten years ago it was still holding up ok

• 
  @stephenwhite49104 ай бұрын

  Are you drunk

• 
  @udoubuilder48234 ай бұрын

  Ermmm I could say the same🌂🔥⛱️

• 
  @waynenixon7294 ай бұрын

  What plaster did you use on brick / block work? I think you suposed to use hardwall or at least bonding. Then wait for that to go off, then skim over the top with multifinish. Brick / block is a very high suction background that combined with being a very hot day.. Multifinish or magic mix? multifinish with a bit of bonding, wont do the job.

• 
  @udoubuilder48234 ай бұрын

  Hi m8 Ur right I sbr the wall twice then bonded Should of used hardwall because of suction U can plaster over bonding once it's gone off Roughly 2 hours Then sbr whole wall Then used. Muiltinish two coats

• 
  @udoubuilder48234 ай бұрын

  Thk for feedback

• 
  @udoubuilder48234 ай бұрын

  In video three right at end u see job finished Been back since Wall is holding well

• 
  @udoubuilder48234 ай бұрын

  I've used that trick. magic mix. Only when leveling walls out abit or going over Artex

• 
  @garydouglass95774 ай бұрын

  You sound wrecked mate so I understand wh you didn’t strip the wall, at least up to the window floor to ceiling. Take it easy 👍

• 
  @garydouglass95774 ай бұрын

  Not worth patching. Strip the lot of the blown wall, board and skim I’d say. Done a lot of these and ended up doing that.👍

• 
  @udoubuilder48234 ай бұрын

  Cheers m8 thx for feed back I gave her a few options She wanted done that way Lol I was knackered was one of the hottest days of the year Getting of bed you'd think I was dying. Lol I'm old

• 
  @groundhogday374 ай бұрын

  Should do some busking it's not bad 😊

• 
  @udoubuilder48234 ай бұрын

  Ty

• 
  @sawdustcrypto39874 ай бұрын

  Better than "not bad" in my opinion! It's downright good!

• 
  @udoubuilder48234 ай бұрын

  Cheers m8

• 
  @BlatantlyOvert5 ай бұрын

  Is she paying you to do that? You have pointed out that the jobs going to need substantially more than builders foam and some skrim to sort it out. Why continue? If you're not willing to do it properly? Tell her it's more than your willing to do instead of ripping a shit plaster off and putting another one back on? No pun intended

• 
  @udoubuilder48235 ай бұрын

  It come down to money It would of cost alot more

• 
  @udoubuilder48235 ай бұрын

  It's five months ago and holding ok Will keep an eye on it She's a relative

• 
  @georgeroberts64575 ай бұрын

  OMG!! mate i have to say i do enjoy watching some work you do, however this project has you looking really bad these are the steps front wall plate needed a 2nd plate with packers to create the minimum 6 degrees for the panels to sit on front to back, then a barge board on each side the front is a monopitch flashing and the rear should have a drip edge thats under the roof panel never use foam under the panels to give sight all you do is make them all uneven and the room will become damp 100% guarantee water or the roof will become loose

• 
  @udoubuilder48235 ай бұрын

  Cheers m8 appreciate ur feed back

• 
  @udoubuilder48235 ай бұрын

  Walls are plated back and front Roof is tied into wall plates Straps over wall plate to tie them down Roof tied into wall plates with 160 mil screws

• 
  @udoubuilder48235 ай бұрын

  Barge boards front and sides Overhang by 25 mil for drip edges

• 
  @udoubuilder48235 ай бұрын

  When I set wall plates on I layer levelled and made sure they was perfect

• 
  @sawdustcrypto39875 ай бұрын

  I had something similar. I scraped out the mortar pretty deep, wet the crap out of it, and stuffed a bunch of fresh mortar in. Waited 3 days and plastered. Not saying I know what I'm doing (i don't), but it's still holding 3 years later 🤞

• 
  @udoubuilder48235 ай бұрын

  Sounds good to me Good job

• 
  @camera2painting5 ай бұрын

  I wonder what she is like when she gets mad?

• 
  @udoubuilder48235 ай бұрын

  Lol she was OK just the shock of the state of the wall

• 
  @dkaloupis755 ай бұрын

  😂 divorce her straight away no questions asked, pack a bag move to Thailand job done...you don't deserve that

• 
  @udoubuilder48235 ай бұрын

  Lol Essex girl gutter mouth Not my wife though She's worse

• 
  @tyroneearl11335 ай бұрын

  Fucking hell😂

• 
  @udoubuilder48235 ай бұрын

  I hope so

• 
  @user-ee9wv7hi6e6 ай бұрын

  Looking good (nice job roy )

• 
  @titorivera70626 ай бұрын

  Thank you I enjoy your video

• 
  @udoubuilder48236 ай бұрын

  Ty for ur kind comment

• 
  @tonyjenkins10137 ай бұрын

  😂

• 
  @easypainterslondon7 ай бұрын

  Great job

• 
  @udoubuilder48237 ай бұрын

  ty m8

• 
  @JakeTaylor-oy8xw8 ай бұрын

  Amazing craftsmanship do you do privates

• 
  @udoubuilder48237 ай бұрын

  ill always be there to help...as long as you take the dog for walks and pick the dog shit up

• 
  @anychance54988 ай бұрын

  This has to be a spoof right?

• 
  @udoubuilder48238 ай бұрын

  not following m8...spoof? thanks for comment though ...your the first brother

• 
  @paulaevans738410 ай бұрын

  Keep up the good work. I can’t wait to see it finished 👍🏻

• 
  @udoubuilder48237 ай бұрын

  keep me alive ....maybe ill finish it

• 
  @josiesangbey572111 ай бұрын

  You should have finished his garage by now

• 
  @udoubuilder482311 ай бұрын

  Hi josie just waiting on roof m8

• 
  @paulaevans7384 Жыл бұрын

  Looking forward to see your journey

• 
  @udoubuilder4823 Жыл бұрын

  More to come!