This channel is run by Ellis McPickle - The greatest Professional Tool Operator and Content Specialist. Keen interest in the cleanest of any tool, car or boat. Brisbane, QLD Australia. Contact - [email protected]
That didn’t bite the second piece, it only stripped out the first one. 😂
@This.is.EllisMcPickle3 күн бұрын
It bit hard
@Arklaud3 күн бұрын
Слабоват импакт... до 25$ цена ?
@This.is.EllisMcPickle3 күн бұрын
🤘
@countmorbid31873 күн бұрын
Waste of time indeed ... >_<
@This.is.EllisMcPickle3 күн бұрын
Alright
@This.is.EllisMcPickle4 күн бұрын
Very exciting new purchase! 🎉
@This.is.EllisMcPickle4 күн бұрын
zing
@Wopko7 күн бұрын
Keep up the good work. Builders are important in this world!
@This.is.EllisMcPickle6 күн бұрын
Very true, the make the world
@LobeznoMeneses7 күн бұрын
I froth that grinder, it's a beast
@This.is.EllisMcPickle6 күн бұрын
It does go hard
@This.is.EllisMcPickle7 күн бұрын
Sniper
@ernie84017 күн бұрын
I had a cutting wheel blow up in my face the other day. Hurt like a 🐝itch
@This.is.EllisMcPickle7 күн бұрын
You have to be careful and always wear the safety equipment
@noragray7 күн бұрын
Jesus man i nearly fell asleep watching this,so fckn boring😮
@This.is.EllisMcPickle7 күн бұрын
Watch it before bed. Could help you get to sleep
@This.is.EllisMcPickle9 күн бұрын
Like butter 😮
@pshtewanpenjweni644111 күн бұрын
Is that the same circuit saw that's used for cutting metal with a different blade?
@This.is.EllisMcPickle11 күн бұрын
you would have to double check and also change the blade
@pshtewanpenjweni644111 күн бұрын
@@This.is.EllisMcPickle sir you're an idiot I literally said different blade so nobody says that blade is for cutting wood are you happy now
@nicgregorich752212 күн бұрын
Great saw, but You really do need to let the blade speed up for a couple seconds before you start your cut, otherwise it doesn't cut worth a damn. Milwaukee comes out on top with most of their tools, but this is where they lose by a Longshot. Dewalt's worm drive is a Beast.
@This.is.EllisMcPickle11 күн бұрын
It felt pretty speedy on my end. However, I like your thought.
@Charles-dy5oo12 күн бұрын
top for finishing work
@This.is.EllisMcPickle12 күн бұрын
I agree
@This.is.EllisMcPickle12 күн бұрын
very clean
@lachlanvandermeer197114 күн бұрын
I like both
@This.is.EllisMcPickle13 күн бұрын
Yea good answer
@jessicakotis383614 күн бұрын
Rear for that 🎉
@This.is.EllisMcPickle13 күн бұрын
🤘
@This.is.EllisMcPickle14 күн бұрын
unreal style
@This.is.EllisMcPickle16 күн бұрын
Unreal smashingly good
@This.is.EllisMcPickle18 күн бұрын
😮
@aidendavies739223 күн бұрын
Well that’s a shame
@This.is.EllisMcPickle21 күн бұрын
should I try harder for you?
@jessicakotis383624 күн бұрын
Nice😂
@This.is.EllisMcPickle23 күн бұрын
🤘
@xaviercuolahan932325 күн бұрын
Cleeeaan McPickle 😮💨
@This.is.EllisMcPickle25 күн бұрын
Appreciate the support.
@MrAndreCoutinho27 күн бұрын
Wow, that’s quite a downgrade. Why did you did this? I have this camera and it’s packed with pro features but the lens isn’t that sharp as I wish it was. Although it has a ccd sensor, the color science lacks that wow “film look” factor that many people would like to see, you gotta tweak the color profiles to achieve it. If I had to downgrade from a GRIII, I would have picked an older GRD instead.
@This.is.EllisMcPickle26 күн бұрын
Good question. Gr3 didn’t have a flash and that limited me for what I was doing at the time. Also the cost I was able to sell for pretty much the same as what I bought for.
@MakeWithMike27 күн бұрын
Yeah on the lowest speed and barely touching pressure 🤣 mis leading and dangerous to claim there buddy !
@This.is.EllisMcPickle27 күн бұрын
Alright.
@MakeWithMike27 күн бұрын
Crazy asset I told myself up with those a few times leaking
@This.is.EllisMcPickle27 күн бұрын
🫶
@rob.chadwick27 күн бұрын
apply force😂😂
@This.is.EllisMcPickle27 күн бұрын
Almost anything will cut you if you enough force.
@jaypeck25327 күн бұрын
Very similar to tool for they used to remove my cast
@This.is.EllisMcPickle27 күн бұрын
It was invented by the medical industry and the building industry adopted the idea!
@IceMan-xy1yt27 күн бұрын
Do it with a table saw
@This.is.EllisMcPickle27 күн бұрын
You would be pushing your luck 🍀
@darkphase779928 күн бұрын
Where there is a will, there is a way young padiwan
@This.is.EllisMcPickle27 күн бұрын
Hahaha
@DaddyBeanDaddyBean28 күн бұрын
Try that on a bent knuckle - or maybe don't - but I'll bet it wouldn't end well.
@This.is.EllisMcPickle27 күн бұрын
As long as some skin is there vibrate around.
@rfoline128 күн бұрын
That’s why they use them to cut casts off people
@This.is.EllisMcPickle27 күн бұрын
Very true. Was invented by the medical industry.
@federer271628 күн бұрын
Only the sharp spades slice, the saws are harmless 😢
@This.is.EllisMcPickle27 күн бұрын
Good shout
@CROFTY7128 күн бұрын
Be careful or you'll get yourself in a pickle. hehe
@This.is.EllisMcPickle28 күн бұрын
I like what you did there. However, it would be very hard with this tool.
@CharlieRussell-uc9xiАй бұрын
Great content. Thoroughly enjoyed.
@This.is.EllisMcPickleАй бұрын
Much appreciated! It is a wild scene.
@Charles-dy5ooАй бұрын
good tool!
@This.is.EllisMcPickleАй бұрын
very handy
@MarkKotisАй бұрын
Great tool, very handy for a carpenter.
@This.is.EllisMcPickleАй бұрын
It would be perfect for the carpenter!
@LobeznoMenesesАй бұрын
Love the set-up, so clean
@This.is.EllisMcPickleАй бұрын
The support 🙌🙌
@LobeznoMenesesАй бұрын
Just something premium about the Milwaukee gear hey
Пікірлер
big day on the tools
This is the content I needed
Helping to do this ^^
Сам закрутил саморез! Круто😂
nice
That didn’t bite the second piece, it only stripped out the first one. 😂
It bit hard
Слабоват импакт... до 25$ цена ?
🤘
Waste of time indeed ... >_<
Alright
Very exciting new purchase! 🎉
zing
Keep up the good work. Builders are important in this world!
Very true, the make the world
I froth that grinder, it's a beast
It does go hard
Sniper
I had a cutting wheel blow up in my face the other day. Hurt like a 🐝itch
You have to be careful and always wear the safety equipment
Jesus man i nearly fell asleep watching this,so fckn boring😮
Watch it before bed. Could help you get to sleep
Like butter 😮
Is that the same circuit saw that's used for cutting metal with a different blade?
you would have to double check and also change the blade
@@This.is.EllisMcPickle sir you're an idiot I literally said different blade so nobody says that blade is for cutting wood are you happy now
Great saw, but You really do need to let the blade speed up for a couple seconds before you start your cut, otherwise it doesn't cut worth a damn. Milwaukee comes out on top with most of their tools, but this is where they lose by a Longshot. Dewalt's worm drive is a Beast.
It felt pretty speedy on my end. However, I like your thought.
top for finishing work
I agree
very clean
I like both
Yea good answer
Rear for that 🎉
🤘
unreal style
Unreal smashingly good
😮
Well that’s a shame
should I try harder for you?
Nice😂
🤘
Cleeeaan McPickle 😮💨
Appreciate the support.
Wow, that’s quite a downgrade. Why did you did this? I have this camera and it’s packed with pro features but the lens isn’t that sharp as I wish it was. Although it has a ccd sensor, the color science lacks that wow “film look” factor that many people would like to see, you gotta tweak the color profiles to achieve it. If I had to downgrade from a GRIII, I would have picked an older GRD instead.
Good question. Gr3 didn’t have a flash and that limited me for what I was doing at the time. Also the cost I was able to sell for pretty much the same as what I bought for.
Yeah on the lowest speed and barely touching pressure 🤣 mis leading and dangerous to claim there buddy !
Alright.
Crazy asset I told myself up with those a few times leaking
🫶
apply force😂😂
Almost anything will cut you if you enough force.
Very similar to tool for they used to remove my cast
It was invented by the medical industry and the building industry adopted the idea!
Do it with a table saw
You would be pushing your luck 🍀
Where there is a will, there is a way young padiwan
Hahaha
Try that on a bent knuckle - or maybe don't - but I'll bet it wouldn't end well.
As long as some skin is there vibrate around.
That’s why they use them to cut casts off people
Very true. Was invented by the medical industry.
Only the sharp spades slice, the saws are harmless 😢
Good shout
Be careful or you'll get yourself in a pickle. hehe
I like what you did there. However, it would be very hard with this tool.
Great content. Thoroughly enjoyed.
Much appreciated! It is a wild scene.
good tool!
very handy
Great tool, very handy for a carpenter.
It would be perfect for the carpenter!
Love the set-up, so clean
The support 🙌🙌
Just something premium about the Milwaukee gear hey
And Makita😍
Klein Tools have a good bit set.
They are good
What bit set is your favourite?
Yep 🙂
What size?
150cm
Do you only buy Milwaukee
Only when I want the most power
Better intonation than I 😢
🫡
Sing me a song, your a Milwaukee man~
Pretty big Makita fan actually.
Should I get snap on?
Is it better than battery power?