Пікірлер

• 
  @philliphall51984 күн бұрын

  No click no cable number

• 
  @thefantasticadventuresofmr71264 күн бұрын

  Cable number will be different depending on your model and S/N. No point in posting something that might not work for you. Go to www.partstree.com and inter your info and they will be able to get you the correct OEM part.

• 
  @williamtucker75746 күн бұрын

  You are definitely going threw way to much gas with that saw my 661 I could do 3 of those trees on a tank

• 
  @thefantasticadventuresofmr71266 күн бұрын

  The double whammy about this saw is it runs 25:1 fuel mix.

• 
  @anthonylassiter426211 күн бұрын

  check out the new 61v deck they have a box like plate around the gearbox that stands out past the shaft and i believe its compatible with the older mowers

• 
  @thefantasticadventuresofmr712610 күн бұрын

  Next time I have one blow I’ll look into that. Thanks for the tip!

• 
  @johnf.694224 күн бұрын

  Yes it can cause problems..

• 
  @a_dog_with_sushi4250Ай бұрын

  well i dont hear any sounds unusual, nother guy tryna get money from warranty

• 
  @thefantasticadventuresofmr7126Ай бұрын

  I just adjusted the valves. No gap on the exhaust.

• 
  @mycaI_Ай бұрын

  Thanks for the video, answered all my questions. By the look of the comments, all of our cables are breaking around the same time ha

• 
  @user-dp2iy5lj7kАй бұрын

  How many hours on the mower, do you have a ballpark figure? What a new motor would cost.

• 
  @thefantasticadventuresofmr7126Ай бұрын

  When I bought the mower It had 1700 hours on it and on the new motor I already have 178 hours on it. A motor will run you roughly $2800 And that’ll come with a three-year warranty through Kawasaki.

• 
  @pinarppanrapir9489Ай бұрын

  Thumbs up for the sharpie trick

• 
  @Adam-wi6nqАй бұрын

  Good video mate, your audio is a bit quiet though.

• 
  @thefantasticadventuresofmr7126Ай бұрын

  I was using a Rode Video Mic but it was facing the tiller. Next time I’ll spin it around to face myself. Thank you for the comment. Audio seems to be one of the harder things to master when making these videos.

• 
  @user-rr2qr7wv5uАй бұрын

  I'm mowing with my 1989 model. 14hp kawasaki. 35 years old, two pulls, and were up and running. The only issue i've had is finding parts Especially the spindles

• 
  @thefantasticadventuresofmr7126Ай бұрын

  So I worked at the gravely dealer in Knoxville, TN and I’m pretty sure they used those spindles all the way to the end of that deck style. The newer ones were the grease less ones. But they still bolted up no problem. Just used a different pulley up top.

• 
  @zaccaria9769Ай бұрын

  Thank you so much mate for the video saved me alot of time and anger.

• 
  @MomtojoshcanparkАй бұрын

  Great video. But I have a question. If only the spring is broken do you have to replace the whole cable?

• 
  @thefantasticadventuresofmr7126Ай бұрын

  Yes. The spring is crimped to the cable at one end.

• 
  @markkromer12382 ай бұрын

  I'm buying a Scag that looks like this for $300 I want to restore it.

• 
  @thefantasticadventuresofmr7126Ай бұрын

  It’s a great mower. My only gripe with it is it cuts a little low for my taste.

• 
  @bob351702 ай бұрын

  I just bought a 2012 Scag Saber Tooth diesel that I am repowering it with a Kubota D1105

• 
  @thefantasticadventuresofmr71262 ай бұрын

  That will be a good combination. 👍

• 
  @survivalsquatch81482 ай бұрын

  What's the part number please. I've replaced mine once about a year ago and the round piece that goes on that pin broke. I thought I ordered the right one but they sent me a much longer cable than I needed. I need to make sure I have the right part.

• 
  @thefantasticadventuresofmr71262 ай бұрын

  I’ll look when I get home and post it for ya if I can find it.

• 
  @directedbyxaai2 ай бұрын

  i just replaced this and it immediately broke again the same way lol 😭

• 
  @thefantasticadventuresofmr71262 ай бұрын

  So I would check to make sure you have the correct deck belt. The person I bought the mower from just replaced it on this unit and it was too short. Causing the spring to overstretch.

• 
  @directedbyxaai2 ай бұрын

  @@thefantasticadventuresofmr7126 thanks! going to look into this!

• 
  @billstiles87193 ай бұрын

  What is the part number on those seals?

• 
  @thefantasticadventuresofmr71262 ай бұрын

  I’ll check and post it for you.

• 
  @NobhillFunny2 ай бұрын

  I’m also looking for that part number or atleast the thickness.

• 
  @billstiles87192 ай бұрын

  @@NobhillFunny The Scag part number for the seals is 481651 but I haven’t found a crossover to a cheaper brand yet.

• 
  @shepherdgirl93973 ай бұрын

  Thank you so much! Great video.

• 
  @thefantasticadventuresofmr71263 ай бұрын

  You're very welcome!

• 
  @AbsFabbs3 ай бұрын

  The paper plate seals the deal…

• 
  @thefantasticadventuresofmr71263 ай бұрын

  Right. Lol

• 
  @charleshenning59713 ай бұрын

  Only thing missing , the real bandit

• 
  @davidcurnutt95843 ай бұрын

  Thanks so much for this. I was struggling on finding a way to get the drive shaft off the gearbox. It’s so filthy I didn’t see a set screw.

• 
  @thefantasticadventuresofmr71263 ай бұрын

  I’m glad I could help you out.

• 
  @mreed7774 ай бұрын

  Just started tearing down mine on my Walker B18. Exact same thing happened. I'll be interested to see what the bottom end looks like once I get the case split. How many hours on yours before it blew?

• 
  @thefantasticadventuresofmr71263 ай бұрын

  Right around 647 hours @mreed777

• 
  @mreed7773 ай бұрын

  Dang, 683 on mine.

• 
  @MrBruno3014 ай бұрын

  Men that don't need the instructions. LOL

• 
  @thefantasticadventuresofmr71263 ай бұрын

  You know it. Lol

• 
  @MTHPowerWash4 ай бұрын

  Just purchased a 2000 SW36-13KA. Cold outside but gona get into it tomorrow. Might need carb cleaned. Gona buy all new belts just because.

• 
  @thefantasticadventuresofmr71264 ай бұрын

  You always take a risk of hydro problems when you can’t hear them running. If the price is right the mower is worth it.

• 
  @MTHPowerWash4 ай бұрын

  @@thefantasticadventuresofmr7126 runs ok, 600 bucks. Gona just replace drive belts.

• 
  @rabidfarmer97654 ай бұрын

  Also- i picked up my Gravely cheap w/ blown motor. Got a 25HP Kohler/and PTO now. Sweet mower. Have to figure out how to add a veilkly😅

• 
  @thefantasticadventuresofmr71264 ай бұрын

  Ok mine has a plate of steel bolted to the back that raises the veilky mount a few inches. It’s around 3/8 inch thick. I’ll see if I can attach picture.

• 
  @rabidfarmer97654 ай бұрын

  @@thefantasticadventuresofmr7126 t/hat be great sir. Let me see if I can attach a pic of the belt tensioners I installed. best -

• 
  @rabidfarmer97654 ай бұрын

  That long lever controls the mowing speed- i found out.😅. I almost lost the mower when it took off-😅

• 
  @thefantasticadventuresofmr71264 ай бұрын

  Ya. lol. I did that the first time I used one as well. Watch the handles as well they can really hit hard on the hip bone if you full stop suddenly on a veilky.

• 
  @rabidfarmer97654 ай бұрын

  @@thefantasticadventuresofmr7126 i installed John Deere belt tensioning arms in the gravely- much simpler and prettier. I put 2-springs each and the belts are nice and happy. The stock Gravely tensioners are cumbersome and ugly. LoL

• 
  @thefantasticadventuresofmr71264 ай бұрын

  It always does. 4x the time to film and fix a project.

• 
  @dsgerstner75264 ай бұрын

  It took a little longer than expected. 😂

• 
  @twsportsyt5 ай бұрын

  Those subs look fire!!!🔥🔥🔥

• 
  @thefantasticadventuresofmr71265 ай бұрын

  They are! They are my new favorite sub stop! And they sale soups, fried chicken, and sushi but I normally don’t eat the sushi.

• 
  @johnserrano96895 ай бұрын

  Legitimately one of the best full size compact tractors ever made (the 1050 is the biggest and deere most reliable ever made according to their own metric) the 1050 rus the same exa t 3t90 engine except built for and with an rhb6 turbo. The 1050 is in fact alittle bigger and stronger than the 850, also came with double clutch for live pto. The hydralics were improved massively over time aswell. The old school sliding gear trans is absolutely bulletproof. They were built by yanmarto deeres bigger, more powerful all steel, much stronger cooling system and vented front axle on mfwd models...not to mention the open center hydraulic system is highly unusual for deere

• 
  @josecalderon30165 ай бұрын

  Great video...easy to undestand

• 
  @thefantasticadventuresofmr71265 ай бұрын

  Glad you liked it.

• 
  @1187gs7 ай бұрын

  😂

• 
  @crystalmiller64647 ай бұрын

  You didn’t want to use crackers which you should’ve done is used flour.. make sure you got a coding of flower on the outside of that then grill it

• 
  @josiah.deehavard45557 ай бұрын

  Ive got a 1st gen sw belt drive byt cant seem to get it to run. Im pretty new to mechanical stuff and was wondering if you knew any answers

• 
  @thefantasticadventuresofmr71267 ай бұрын

  What type of engine does it have? Do you have the brand and model of the engine?

• 
  @josiah.deehavard45557 ай бұрын

  @@thefantasticadventuresofmr7126 it has a 19hp kawasaki and the model is SW36-13KH. the problem is that when i turn on the blades it shuts the mower off

• 
  @DanielCruz-cl5se7 ай бұрын

  Great video, where did you order the new cable?

• 
  @thefantasticadventuresofmr71267 ай бұрын

  I picked it up off eBay because parts tree.com never got it in stock.

• 
  @henryefroymson49418 ай бұрын

  Not helpful when the review is based in ignorance

• 
  @robertspreitzer81268 ай бұрын

  I’m doing the same thing with an old Exmark Lazer Z zero turn. I still need to have the piston rings replaced burns lots of oil.

• 
  @x619xJOEx8 ай бұрын

  I rather go next door for steam boy for the food, because it's take like 30 minutes waiting on no busy hours

• 
  @x619xJOEx8 ай бұрын

  They don't have anys of that now, got to go up the street for it at patel brother india supermarket for it

• 
  @thefantasticadventuresofmr71268 ай бұрын

  I’ll have to try it out next time I’m in the area. Thanks for the suggestion.

• 
  @laurendavis92828 ай бұрын

  🤨🤔

• 
  @chuckgilbert20358 ай бұрын

  Nice work. I restored a Scag Freedom Z last year. First Scag for me. I was impressed with how much easier it is to cut the lawn with a zero turn. This year I restored a Tiger Cub. Wow. it is so much faster than the Freedom Z with its wheel motors and pumps. I may look for a Farris for its suspension system.

• 
  @thefantasticadventuresofmr71268 ай бұрын

  Thank you. I’m working on a video that will show a comparison between the turf tiger and the Farris right now. With the mowing season winding down for the year I might be mulching leaves instead of cutting grass. I want to do comparison on speed, cut quality, and how comfortable they are to the operator. It should be interesting. Right off the bat I can tell you hands down the Farris has more power then the turf tiger who would have thought going from 27hp to 31hp would have made that much of a difference.

• 
  @ededmund56859 ай бұрын

  good video thx Ed Loretto Ontario Canada ,,,,how much did this all cost

• 
  @thefantasticadventuresofmr71269 ай бұрын

  Around 5700

• 
  @M70ACARRY9 ай бұрын

  Nice job. That engine is sweet. My Bobcat just has a little FR651v.

• 
  @thefantasticadventuresofmr71269 ай бұрын

  Thanks 👍 ya I wanted something that would not slow down for anything! And as you will see in the next video I’m working on it won’t disappoint.

• 
  @EVERYDAYLAWNCARE9 ай бұрын

  Absolutely love this restoration work of a great mower. Which part or TN are you from sir? I’m located in East Tn part above Knoxville towards VA line

• 
  @thefantasticadventuresofmr71269 ай бұрын

  Towards Nashville. But I’m originally from Knoxville.

• 
  @swamppy48809 ай бұрын

  A KZread channel from Canada,did a movie correct Snow man truck and trailer. Twin Sticks Garage

• 
  @thefantasticadventuresofmr71269 ай бұрын

  I checked out that video. It was awesome! Then I went and looked at the shifter pattern for a twin stick truck. Wow!

• 
  @justinbeamon66249 ай бұрын

  This is cool and i love the tracks, but you can get some Kavli beast blades and turn any zero turn into a brush hog if it has enough power.

• 
  @thefantasticadventuresofmr71269 ай бұрын

  I like how it was rear discharge. Hustler has a mower like that also.

• 
  @bobm219 ай бұрын

  Bucket list

• 
  @jake-fw8th9 ай бұрын

  Do you know the model number

• 
  @thefantasticadventuresofmr71269 ай бұрын

  I’ll look it up today for you

• 
  @thefantasticadventuresofmr71269 ай бұрын

  The model number is SWZ-16BVE S/N 17000000 range

• 
  @yzimsx9 ай бұрын

  I have the same lens, and it's really not the "1.33x" it says on the box. :) I mean, if it means stretching the picture horizontally by a factor of 1.33. If it said 1.2x, I'd say it's close to what it actually does.

• 
  @thefantasticadventuresofmr71269 ай бұрын

  So I used it some for the video when I went to pikes peak and I liked how the video turned out. It’s to bad that no one has come out with custom go pro firmware that would allow you to use steady shot in combination with the lens. In my opinion that would be one heck of a combination. But for now it works great with a tripod.

• 
  @dannysdailys9 ай бұрын

  No Golden Eagles? Wow: Bummer. I knew I should've bought that car.