Пікірлер

• 
  @keksfabrik17 күн бұрын

  Some comments/tips: 1. use a laminating machine if you have, on the press it will often bubble 2. use the thinnest laminating film you can get, 50mic, maybe less 3. laminating only one side (front) of the vinyl 4. the white vinyl is only needed to get the sticky back, you can use other colors too, but of course without white background 5. the sublimation does only work good on the laminating film (polyester), not the vinyl itself 6. sublimation is only good for indoor use, outdoor it will fade really quick from sunlight 7. uv protection coating can help with (6) a little, but if you want long lasting decals, just use colored vinyl with your cutter alone 8. you can do transparent decals from transparent vinyl without laminating film, the sublimation will be inside the glue of the vinyl 9. if you sublimate the white vinyl directly, the image will be in the glue too. you can use this for windows from the back (inside)

• 
  @ThatROUGHTLife17 күн бұрын

  Thank you SO MUCH for the tips!!!

• 
  @HarvestingFaith20 күн бұрын

  Just to clarify, you're applying laminate to vinyl, then applying the sublimation to the laminate?

• 
  @ThatROUGHTLife20 күн бұрын

  Yes, that's it!

• 
  @HarvestingFaith17 күн бұрын

  ​@@ThatROUGHTLifeand I'm assuming it has to be THERMAL laminate? Just tried regular aaand didn't go so great 😂

• 
  @ThatROUGHTLife17 күн бұрын

  @HarvestingFaith yes, thermal laminate. Oh goodness. I hope you got a good laugh out of it.

• 
  @brentsloan203226 күн бұрын

  Yall are so much fun! I Love watching yalls shenanigan.

• 
  @ThatROUGHTLife26 күн бұрын

  I'm glad we can provide some joy to someone

• 
  @catewilson767126 күн бұрын

  Cate won

• 
  @christyrought574926 күн бұрын

  Idk. Maybe

• 
  @haydenrought831426 күн бұрын

  hayden won

• 
  @christyrought574926 күн бұрын

  Idk. Maybe

• 
  @coltmom3964Ай бұрын

  If you laminate both sides of the 651, how do you peel the back of the sticker? Or do you just laminate the one side (shiny side)?

• 
  @habanero6332Ай бұрын

  I do not understand why you laminate first instead of after.

• 
  @ThatROUGHTLifeАй бұрын

  The sublimation ink will adhere to the laminate not the vinyl. I feel like it would be easier to laminate a piece of white vinyl first, then cut it and sublimate it

• 
  @habanero6332Ай бұрын

  @@ThatROUGHTLife I see thank you.

• 
  @ThatROUGHTLifeАй бұрын

  You're welcome

• 
  @ThatROUGHTLifeАй бұрын

  Link to baskets. StorageWorks Closet Baskets, Fabric Baskets for Closet Shelves, Foldable Trapezoid Storage Bins, Gray, 3-Pack a.co/d/1Vr3FGn

• 
  @coltmom3964Ай бұрын

  What temperature for the one minute?

• 
  @ThatROUGHTLifeАй бұрын

  350°

• 
  @2guysvintage699Ай бұрын

  Thank you for this. I subscribed and liked because you two deserved it. He’s the BUT…… A huge and critical part of doing this is the decorative glaze. I understand your two chose not to use it, that’s fine but an example on another piece of scrap wood would have completed this DIY/review tutorial video. As I start to apply the decorative glaze now, I am certain that this step is the most difficult and important to the whole look. Keep it up you too! Great teamwork. It’s clear you two love each other.

• 
  @brittanybyrd84672 ай бұрын

  Alrighty - I got kinda lost and would appreciate your feedback. Am I placing my printed sublimated image in the pouch and pressing at 400 degrees for 1 minute? Or am I placing the 651 in the thermal pouch and pressing? Or is it both? I got everything else from there, it's just that bit that's a tad confusing.

• 
  @ThatROUGHTLife2 ай бұрын

  Place the 651 in the pouch with the laminate film on top. That will adhere the film to the vinyl.

• 
  @FUNNYMANERICWHITE3 ай бұрын

  Thanks

• 
  @waxinfluence4 ай бұрын

  Nice tutorial hun thanks that’s exactly what i was looking for.

• 
  @mjje69754 ай бұрын

  How does the backing come off to peel to stick , I absolutely love the video !

• 
  @ThatROUGHTLife2 ай бұрын

  You just remove the backing from the vinyl (651) and apply to the car.

• 
  @jeangrandy86725 ай бұрын

  What temperature did you press these at?

• 
  @ThatROUGHTLife2 ай бұрын

  I do 400°

• 
  @tabathawhitaker53787 ай бұрын

  I found this video very confusing, if you showed what you were doing and explain it like you are teaching someone that's never done it it would be more helpful

• 
  @ThatROUGHTLife7 ай бұрын

  Thank you for the input! I appreciate the tips!

• 
  @laurenodland80927 ай бұрын

  Where did you get that photo to work with? Thank you.

• 
  @ThatROUGHTLife7 ай бұрын

  I found a blank messy bun image

• 
  @43wagonwheel8 ай бұрын

  The kits have Krud Kutter in them now.

• 
  @ThatROUGHTLife7 ай бұрын

  Thanks for the i.fo!

• 
  @TanyaO.3 ай бұрын

  I'm using this kit with the deglosser. I did use crud cutter to clean before using the deglosser. My cabinets are covered with vynil veneer. The paint works well.

• 
  @MizzRann8 ай бұрын

  It's stating the file was deleted.

• 
  @ThatROUGHTLife7 ай бұрын

  Email me and I can send it to you.

• 
  @MizzRann8 ай бұрын

  Thank you so much. This was super helpful!!!

• 
  @ThatROUGHTLife7 ай бұрын

  You're very welcome!!

• 
  @touringnotboring620010 ай бұрын

  But where is the sticky side as it’s back to front ?

• 
  @rebaeaton402110 ай бұрын

  I used white oracle 651 and the white disappeared when I pulled the back off 🤦🏼‍♀️ is this normal??

• 
  @ThatROUGHTLife10 ай бұрын

  I've never experienced that.

• 
  @DavidYouhas11 ай бұрын

  Thanks for the video. Newby maybe silly question... am I sublimating the thermal lamination side or the vinyl sticker side? I believe the thermal lamination ends up on the away side (of outside window) of the whole decal, then the vinyl sticker and then sticky back side of vinyl sticks on outside of car window. I am just not understanding which side the sublimation is penetrating - the thermal lamination or vinyl sticker. Thanks

• 
  @ThatROUGHTLife10 ай бұрын

  You are sublimating on the thermal film then applying that to the white sticky vinyl.

• 
  @DavidYouhas10 ай бұрын

  @@ThatROUGHTLife thanks for the reply! I found an easy way to get lamination adhered perfectly flat to permanent vinyl. Maybe a “that’s obvious” but I was having problems getting it flat using heat press so I tried running both laminate and vinyl through A4 laminator and got perfect results every time. Thanks again I love your videos - very helpful.

• 
  @jeangrandy86725 ай бұрын

  @@DavidYouhasI’ve been thinking of getting a laminator, which one did you get and can you just laminate the car decal on one side? Thanks 😊

• 
  @stephaniecouillard7982 Жыл бұрын

  I followed this method twice and both times it did not work.

• 
  @ThatROUGHTLife Жыл бұрын

  I'm sorry it didn't work for you. I'm working on getting a new method for everyone

• 
  @stephaniecouillard7982 Жыл бұрын

  I look forward to trying any new ways you may think of.

• 
  @sunnybunny222 Жыл бұрын

  Thanks for sharing. I liked your video but i feel like you left out a lot. i would like to have seen ALL the steps. i would rather have seen the work instead of you telling about the work...imagine camera facing down on the project. never the less, it is a good video. and i really do appreciate you making it.

• 
  @ThatROUGHTLife Жыл бұрын

  Thank you and thanks for the tips!

• 
  @heatherm9124 Жыл бұрын

  Not understanding 😞

• 
  @ThatROUGHTLife Жыл бұрын

  It can be tricky!!

• 
  @anitaramirez163 Жыл бұрын

  Have you tried to clean your heat press with the Dritz hot iron cleaner?

• 
  @ThatROUGHTLife Жыл бұрын

  No! I need to!

• 
  @msterrakful Жыл бұрын

  I follow the steps but the image is coming out on the sticky side. Any tips

• 
  @ThatROUGHTLife Жыл бұрын

  I'm not sure.

• 
  @DavidYouhas Жыл бұрын

  Thanks for the video! What sublimation printer are you using or would you recommend? I’m interested in making car decals and cups. Thanks

• 
  @ThatROUGHTLife Жыл бұрын

  Thank you!!! I have an Epson Ecotank 8550.

• 
  @Lganme Жыл бұрын

  Thank you. This is exactly what I’ve been looking for

• 
  @ThatROUGHTLife Жыл бұрын

  That's awesome!! You're welcome!

• 
  @Desiree-rq8yn Жыл бұрын

  I’m struggling to know which side of thermal paper to use?

• 
  @ThatROUGHTLife Жыл бұрын

  I struggle with that also. I buy the thermal pouches for 8.5x11 paper. That was it is connected on one side. The inside of the sheet is the thermal part. If I cut some off one side, I keep some attached so I know which side is still the inside. If that makes any sense.

• 
  @AnamarieCruz-xw1mr Жыл бұрын

  You forgot to mention me, the scheduler. Glad y’all are enjoying the pool.

• 
  @ThatROUGHTLife Жыл бұрын

  Shoutout to you! Thank you for all your help!

• 
  @natashacampbell1137 Жыл бұрын

  So happy for ya'll!

• 
  @ThatROUGHTLife Жыл бұрын

  Thank you!!

• 
  @uncleandross7437 Жыл бұрын

  @3:51 Paul, no. Just.... No.

• 
  @ThatROUGHTLife Жыл бұрын

  Hahahahahah

• 
  @Itseemedlikeagoodida Жыл бұрын

  How do they hold up to the sun and rain that your car endures? Thank you for making this video 😊

• 
  @ThatROUGHTLife Жыл бұрын

  You're welcome. Mine lasted about a year. The color faded, but the decal is still on. Look through the comments on this video. Someone mentioned some UV spray you can get from Amazon.

• 
  @joelowen5661 Жыл бұрын

  What is the program your using?

• 
  @ThatROUGHTLife Жыл бұрын

  Silhouette Studio

• 
  @joelowen5661 Жыл бұрын

  How long does the stickers last on a car?

• 
  @ThatROUGHTLife Жыл бұрын

  Sticker lasts as long as a regular decal with Oracal 651 adhesive vinyl. Sublimation will fade. Check the comment thread about uv spray on Amazon to help protect from fading

• 
  @jennylowe44867 ай бұрын

  I wonder if you sub on the vinyl then laminate if it will not fade as bad. @@ThatROUGHTLife

• 
  @ThatROUGHTLife7 ай бұрын

  @@jennylowe4486 I need to try that.

• 
  @salvationranch2984 Жыл бұрын

  Maybe I'm just up to early watching videos but I have a question. If you laminate the 651, how can it stick to the car? Did you only put it on the top of the 651 or did you put it in the pocket.

• 
  @ThatROUGHTLife Жыл бұрын

  It goes on top of the 651

• 
  @jeangrandy86725 ай бұрын

  @@ThatROUGHTLifeit looked like you placed it in the pouch??

• 
  @amandacollins2721 Жыл бұрын

  Did you use clear or white 651

• 
  @ThatROUGHTLife Жыл бұрын

  I used white

• 
  @billiebrown6263 Жыл бұрын

  How does the sublimation on the vinyl hold up to weather and uv light on vehicle windows?

• 
  @ThatROUGHTLife Жыл бұрын

  Mine has been on about a year and is fading. I will probably just make them for personal use since I can remake it myself when I want to replace it.

• 
  @billiebrown6263 Жыл бұрын

  @@ThatROUGHTLife have you tried to add another layer of laminate on your final project to see if that helps?

• 
  @ThatROUGHTLife Жыл бұрын

  @@billiebrown6263 I haven't, but I will!

• 
  @tonyawheat361 Жыл бұрын

  Can Siser permanent vinyl be used with the same results?

• 
  @ThatROUGHTLife Жыл бұрын

  Yes

• 
  @reneepaiz9574 Жыл бұрын

  Thank you for your videos and advice.Im going to look into the website.Ive been using Glitter vinyl to sublimate....ugh today i bought sparkle vinyl ugh mess!!we live n learn.

• 
  @ThatROUGHTLife Жыл бұрын

  You're welcome! Keep working on it!

• 
  @reneepaiz9574 Жыл бұрын

  Great job

• 
  @ThatROUGHTLife Жыл бұрын

  Thank you

• 
  @yashiramoralesrivera1724 Жыл бұрын

  What vinyl use on Amazon i hace glossy or Matte ??

• 
  @ThatROUGHTLife Жыл бұрын

  I order frosty clear htv from www.craftcuttersupply.com

• 
  @EJ3.16 Жыл бұрын

  Thank you for this tutorial but I’m wondering is any issues with the Sun for this sublimation decal????

• 
  @ThatROUGHTLife Жыл бұрын

  The one I did for this video has faded, but it lasted a while.

• 
  @EJ3.16 Жыл бұрын

  @@ThatROUGHTLife okay thank you for replying I believe there’s a special spray to put on it right so it can last under the sun did you know which it’s????

• 
  @ThatROUGHTLife Жыл бұрын

  @Ed Jmz I'm not sure. I'm sure Google knows! I will check it out and try it.

• 
  @sal2032 Жыл бұрын

  Frog Juice uv spray. You can get it on Amazon.

• 
  @EJ3.16 Жыл бұрын

  @@sal2032 thank you appreciate it...👍🏻

• 
  @amandahauf9343 Жыл бұрын

  Does the sublimation fade if it’s on the clear htv

• 
  @ThatROUGHTLife Жыл бұрын

  No. The shirt I'm wearing in the video hasn't faded.

• 
  @flacacolon8949 Жыл бұрын

  Are they weather proof ?

• 
  @ThatROUGHTLife Жыл бұрын

  Yes, as long as you cut it big enough. I wouldn't go any smaller than 5 inches wide or tall.

• 
  @hiromimotojima Жыл бұрын

  Why can't we use print and cut feature of cricut? If you print including registration marks, then press vinyl, laminate and sublimation paper for 60 seconds, then cut with Cricut, would not that be easier? Is there a reason you press laminate and sub paper separately?

• 
  @ThatROUGHTLife Жыл бұрын

  I'm sure you could. I just don't use Cricut and I don't like to do print and cut.

• 
  @TheDwilliams1000 Жыл бұрын

  Will the adhesive vinyl still stick after that heat is applied

• 
  @ThatROUGHTLife Жыл бұрын

  Yes

• 
  @RoweCountryCrafts Жыл бұрын

  Great Tutorial. Thanks so much for breaking it down. Now I got to go make one I’ve been promising to my daughter LOL

• 
  @ThatROUGHTLife Жыл бұрын

  You're welcome!! Let me know how it turns out!