We Australians shorten everything. Chev is a pretty common way of saying it down here.
@Dusto-qz1hzАй бұрын
@@OGCambo fair enough
@dontrezjones5215Ай бұрын
This just made my day. Definitely putting this in my 81 c10
@badstimpy2 ай бұрын
Sounds like a completely different engine ! Does she fowl plugs much now ?
@keithcornell31732 ай бұрын
great video.im in the process of deciding which cam to put in my 305.i really like the sound..thanks
@gordocarbo3 ай бұрын
Great looking truck A higher stall would help your truck so much! Its a plus not a minus. Not a fan of those cams at all but no negative stuff coming from here. Super clean ride
@slambergang3 ай бұрын
Did you have to swap valve springs with the new heads?? Looking to go for this same setup
@OGCambo2 ай бұрын
Yep, they were in the kit I bought that is shown at the start of the vid.
@Ren-fx5ti5 ай бұрын
Trying to figure out the motor for my 64 C10 so this has me way to excited
@MIke-ob5lx5 ай бұрын
What did you set your timing at? Initial and total?
@openshot7 ай бұрын
So stock block with bolt on and cam?
@clintjohnson49478 ай бұрын
Nice truck
@jamessignorelli8529 ай бұрын
First off , its nice to hear from across yhe pond . The cam sounds radical for avarage street use, is it or not . Im not concerned about economy but how long the cam and engine will last
@blakedavis45499 ай бұрын
Wanting to do this same kit In my 78 k10. Summit racing says you “might” have to modify the head at for new valve springs and measure for new pushrods? Did you have to do any of that? Thanks man!
@justinkorpela795511 ай бұрын
Beautiful truck sounds amazing
@chawalitD11 ай бұрын
Hey mate, how does this drive with the stock converter? Did you have any issues with low vacuum for the brakes?
@DANTHETUBEMAN11 ай бұрын
your paint color is so GOOD. 😎 Great truck. nice job.
@DANTHETUBEMAN11 ай бұрын
The new THUMPR cam is helping sweep your garage floor 😁 how does it pull down low RPM?
@yanni2112 Жыл бұрын
get that green battery in a black box, the rest of the engine bay is awesome
@OGCambo Жыл бұрын
It has matching Optima red tops now.
@JimBronson Жыл бұрын
That was a huge change. Not sure I would have gone that far, but hope you're enjoying it!
@danielwalker3319 Жыл бұрын
Beautiful truck, sounds great!
@user-hl7vg7wk2z Жыл бұрын
Good sound I had the same in my 70 c10, thought it was fast, ran against a 72 ford he had 390 w Comp 268H f’d around and found out, I was all show and no go too much lobe seperation on the thumper to perform
@earlyhemibill Жыл бұрын
Do you know how many degrees the intake valve opens before top dead center?
@ataikonotatsujinplayer2610 Жыл бұрын
I was at the same concert just on the 14
@DaveWhoa Жыл бұрын
damn, you know you've made it when The Offspring is doing a cover of your song!
@zachnickles7655 Жыл бұрын
Any issue with vacuum for power breaks?
@OGCambo Жыл бұрын
I'm running a front disc conversion.
@zachnickles7655 Жыл бұрын
@@OGCambo I have factory front disk in my 89 I’m assuming I should t run into break vaccine issues then.
@karrs42901 Жыл бұрын
whats up man. Its been about 6 months. Any issues with muffler delete? Any lights on the dash?
@OGCambo Жыл бұрын
no issues to date.
@LifeWidBlack Жыл бұрын
That bitch sound good
@ngaire-jasminbarrett5096 Жыл бұрын
i was at this show! so good 😻
@brucedevrous6993 Жыл бұрын
Sounds great, How is it on the road? Any vacuum problems for brakes?
@ClapDemNalgas773 Жыл бұрын
Did you do just camshaft? Or lifters and all
@OGCambo Жыл бұрын
didn't do lifters. my tuner said it wouldn't be required because it's a pretty mild engine. I only added what is highlighted at the start of the video.
@C10chevy85 Жыл бұрын
Did the new cam make the exhaust louder or is it just the camera position? Sounds great!
@OGCambo Жыл бұрын
I think a choppier idle makes that sound more prominent. Not necessarily louder
@C10chevy85 Жыл бұрын
What does the rpm drop to when going into gear? I think it sounds amazing!!
@dansmart3874 Жыл бұрын
This was so good! Noodles is the man!🤘
@johniesmith7672 Жыл бұрын
Like everything about it except the b******* ugly headlights
@Eh_foxy Жыл бұрын
Amazing 👏
@diogom9480 Жыл бұрын
Damn Noodles can sing!
@gusritchie9396 Жыл бұрын
How good was it 😍😍😍
@OGCambo Жыл бұрын
Loved it. Unfortunately not enough of the crowd knew the tribute was taking place and didn't recognise the song.
@Bbirks Жыл бұрын
Fuck yeah. Don’t think they did this at the Perth show. Would’ve been killer
@bulletslime5704 Жыл бұрын
@@Bbirks pretty sure they cover a band from the state they play in each show, so a perth show would cover a band from WA, etc
@Bbirks Жыл бұрын
@@bulletslime5704 yeah I don’t know, I actually can’t remember if they covered a Perth band too many 🍻
@tommywaters2654 Жыл бұрын
Dam good looking ride
@brandongarza7939 Жыл бұрын
Hi Steve! Quick question for ya, what bucket seats do you have in your truck and how’s the leg room? I’ve been looking at different seat setups and I like yours overall.
@OGCambo Жыл бұрын
They're just cheapies for now. Bit firm, but can slide forward and backwards - www.autotecnica.com.au/ss65
@70torinogt70 Жыл бұрын
Nice truck dude i got 1980 c10 with 78 front clip shes sweet
@70torinogt70 Жыл бұрын
Nice that how i want mine to sound like
@joshramirez853 Жыл бұрын
I was told by the guy at summit that I couldn't put a thumper cam in my stock 96 sierra...5.7... its this true... I'm wanting a cam for it I want a nice sounding like but don't know how to choose a cam
@OGCambo Жыл бұрын
Email Comp and ask them. That’s who I used for advice before proceeding.
@theungoliant9410 Жыл бұрын
Summit guys don't really know. Remember, they sell parts for damn near everything. They can't be expert for it all.
@stevenskeeterla Жыл бұрын
You just deleted the cat is that factory exhaust?
@OGCambo Жыл бұрын
Muffler delete as shown in the footage. Both cats still on the back of the headers
@big_daddy_pp Жыл бұрын
Looks great bud, nice little chop from that cam, makes it sound like it wants to party
@rtd6840 Жыл бұрын
are you able to send me a link to this exact kit
@soldozer Жыл бұрын
How lazy are you?
@parkeedge9655 Жыл бұрын
Did you have to change the converter
@chrismooney5737 Жыл бұрын
Definitely made a big difference
@greenboyatgafarms2250 Жыл бұрын
You need a stall converter really bad. It would definitely help that idle when in gear probably about a 2800 stall converter would work
@billyjalufka2567 Жыл бұрын
That's exactly what I wanted to know. Great video. And a very nice sounding truck.
@ronc47622 жыл бұрын
Sounds pretty good! I'm currently installing one in my 71 Camaro. Well see how it turns out!
@davemccumbers6353 Жыл бұрын
installing one in a 83 camaro right now
@lyallfairburn12752 жыл бұрын
That sounds great, 👍😃 awesome video right to the point.
@brysonmorris88162 жыл бұрын
Talked for half the video only for the sound quality to be garbage when you finally started the truck. Disliked.
Пікірлер
I have never heard it called a “chev”
We Australians shorten everything. Chev is a pretty common way of saying it down here.
@@OGCambo fair enough
This just made my day. Definitely putting this in my 81 c10
Sounds like a completely different engine ! Does she fowl plugs much now ?
great video.im in the process of deciding which cam to put in my 305.i really like the sound..thanks
Great looking truck A higher stall would help your truck so much! Its a plus not a minus. Not a fan of those cams at all but no negative stuff coming from here. Super clean ride
Did you have to swap valve springs with the new heads?? Looking to go for this same setup
Yep, they were in the kit I bought that is shown at the start of the vid.
Trying to figure out the motor for my 64 C10 so this has me way to excited
What did you set your timing at? Initial and total?
So stock block with bolt on and cam?
Nice truck
First off , its nice to hear from across yhe pond . The cam sounds radical for avarage street use, is it or not . Im not concerned about economy but how long the cam and engine will last
Wanting to do this same kit In my 78 k10. Summit racing says you “might” have to modify the head at for new valve springs and measure for new pushrods? Did you have to do any of that? Thanks man!
Beautiful truck sounds amazing
Hey mate, how does this drive with the stock converter? Did you have any issues with low vacuum for the brakes?
your paint color is so GOOD. 😎 Great truck. nice job.
The new THUMPR cam is helping sweep your garage floor 😁 how does it pull down low RPM?
get that green battery in a black box, the rest of the engine bay is awesome
It has matching Optima red tops now.
That was a huge change. Not sure I would have gone that far, but hope you're enjoying it!
Beautiful truck, sounds great!
Good sound I had the same in my 70 c10, thought it was fast, ran against a 72 ford he had 390 w Comp 268H f’d around and found out, I was all show and no go too much lobe seperation on the thumper to perform
Do you know how many degrees the intake valve opens before top dead center?
I was at the same concert just on the 14
damn, you know you've made it when The Offspring is doing a cover of your song!
Any issue with vacuum for power breaks?
I'm running a front disc conversion.
@@OGCambo I have factory front disk in my 89 I’m assuming I should t run into break vaccine issues then.
whats up man. Its been about 6 months. Any issues with muffler delete? Any lights on the dash?
no issues to date.
That bitch sound good
i was at this show! so good 😻
Sounds great, How is it on the road? Any vacuum problems for brakes?
Did you do just camshaft? Or lifters and all
didn't do lifters. my tuner said it wouldn't be required because it's a pretty mild engine. I only added what is highlighted at the start of the video.
Did the new cam make the exhaust louder or is it just the camera position? Sounds great!
I think a choppier idle makes that sound more prominent. Not necessarily louder
What does the rpm drop to when going into gear? I think it sounds amazing!!
This was so good! Noodles is the man!🤘
Like everything about it except the b******* ugly headlights
Amazing 👏
Damn Noodles can sing!
How good was it 😍😍😍
Loved it. Unfortunately not enough of the crowd knew the tribute was taking place and didn't recognise the song.
Fuck yeah. Don’t think they did this at the Perth show. Would’ve been killer
@@Bbirks pretty sure they cover a band from the state they play in each show, so a perth show would cover a band from WA, etc
@@bulletslime5704 yeah I don’t know, I actually can’t remember if they covered a Perth band too many 🍻
Dam good looking ride
Hi Steve! Quick question for ya, what bucket seats do you have in your truck and how’s the leg room? I’ve been looking at different seat setups and I like yours overall.
They're just cheapies for now. Bit firm, but can slide forward and backwards - www.autotecnica.com.au/ss65
Nice truck dude i got 1980 c10 with 78 front clip shes sweet
Nice that how i want mine to sound like
I was told by the guy at summit that I couldn't put a thumper cam in my stock 96 sierra...5.7... its this true... I'm wanting a cam for it I want a nice sounding like but don't know how to choose a cam
Email Comp and ask them. That’s who I used for advice before proceeding.
Summit guys don't really know. Remember, they sell parts for damn near everything. They can't be expert for it all.
You just deleted the cat is that factory exhaust?
Muffler delete as shown in the footage. Both cats still on the back of the headers
Looks great bud, nice little chop from that cam, makes it sound like it wants to party
are you able to send me a link to this exact kit
How lazy are you?
Did you have to change the converter
Definitely made a big difference
You need a stall converter really bad. It would definitely help that idle when in gear probably about a 2800 stall converter would work
That's exactly what I wanted to know. Great video. And a very nice sounding truck.
Sounds pretty good! I'm currently installing one in my 71 Camaro. Well see how it turns out!
installing one in a 83 camaro right now
That sounds great, 👍😃 awesome video right to the point.
Talked for half the video only for the sound quality to be garbage when you finally started the truck. Disliked.
Looked up you uploaded video's. None so STFU !