Пікірлер

• 
  @BuckleUpGarage_21 сағат бұрын

  Dope! 🤩

• 
  @devoutrain2500Күн бұрын

  Is there an 18+ STI version? 😢

• 
  @Unknownuser0515Күн бұрын

  we need headlight for vb wrx

• 
  @RushroyaleAddictsКүн бұрын

  why are they releasing stuff for old models.. 2022+ only man

• 
  @Po7entКүн бұрын

  Can’t get my bcs to fit wiring is tight

• 
  @tahjae7862Күн бұрын

  This would be great for the vb

• 
  @WrxyDriven82Күн бұрын

  Can we see a boostlogic turbo upgrade..

• 
  @AntykainКүн бұрын

  The new Noble Lux Series RGB Headlights are not compatible with the 15-21 VA WRX Limited. Base and premium VA WRX's are gtg! The Limited headlights uses a completely different pin-out on the headlight connector itself. I used to own a '15 WRX Limited and found this out the hard way. Mine was not equipped with the SRH, as well.

• 
  @AntykainКүн бұрын

  It looks like the headlights you initially had installed are the Subaru OEM headlights with the C-light mod. Your 'yellow hazy light' is a halogen bulb. I did the c-light mod on my '15 WRX Limited (RIP) and also did the mod for a few of our local Subie guys. The new Noble Lux Series RGB headlight looks killer! I would have definitely picked up a set if I still had my VA. Now I will wait for the new headlights coming for the VB!

• 
  @scottvj3105Күн бұрын

  What gurney flap is installed on the wing

• 
  @andrewvanburen5096Күн бұрын

  Please get some for the VBs

• 
  @AntykainКүн бұрын

  VB headlights are coming Fall/winter 2024.. soon! Pending no delays. 🤙🤙

• 
  @griffonjepson5179Күн бұрын

  don’t show me this shit, show me the 22+

• 
  @brianbrooks6974Күн бұрын

  Bet these would look great on my series grey

• 
  @thebtsclub7Күн бұрын

  ATEEEEEE🔥🔥🔥🔥

• 
  @philb571Күн бұрын

  I love this look. Hope it happens for the VB!!😂😂 but doesnt take years to make.😅

• 
  @Spider-Man-sl6miКүн бұрын

  Speaking of headlights. I have a spare subispeed V1 driverside headlight new in box if anybody needs one.

• 
  @sam.fridayyyКүн бұрын

  Dam we gettin headlights for the 2015+ wrxs but none for the new body style thats been out for 2 years? wut

• 
  @AntykainКүн бұрын

  New headlights for the VB are coming. Fall/winter 2024.. soon!

• 
  @jethrot1002 күн бұрын

  I suspect what was described as a "cotter pin" often called a split pin, actually was a different kind of fastener. Probably an e-clip or something similar. A cotter pin has to be phisically bent to keep it in position and shouldnt be used again for that reason. Someone correct me if I am mistaken. A bit of a shame that the shield had to be abandoned. What a rip off the STI shifter was.

• 
  @Namelesscynic-psn2 күн бұрын

  So what is causing all that beautiful turbo and induction noise?

• 
  @RobGADV3 күн бұрын

  This makes me glad I returned the OEM sport grill and used that money to buy both the Noble grill and these fog light bezels!

• 
  @eltonharris45023 күн бұрын

  Is the ride rough or vibrate when on the open road?

• 
  @carsondomel52913 күн бұрын

  tools needed list?? before I buy hahah

• 
  @ianfairbanks13183 күн бұрын

  Where’s the instructions for the fog light kit for the base model without oem fogs? Not on your website.

• 
  @Unknownuser05154 күн бұрын

  can u do a video of installing an under seat subwoofer @@

• 
  @Serperix5 күн бұрын

  Decibels??

• 
  @b_swazzymodo6 күн бұрын

  Not sure how often you check comments on KZread but here we go, recently lost my 2023 VB to a MAC truck when my wife took it to work one day (everyone’s fine) but lost the car. Insurance cut the check, went to Subaru and will be getting a TS as soon as the order process opens for consumers (I work for Morgan auto group so I got the ins on when I can get it) I drive past your shop everyday to work and never knew it was there. Seen a random Instagram post of the car in the parking lot and was like YOOOOOO I know that car I see it all the time at this shop. Going to be stopping by sometime to spend lots and lots of money LOL. But my real question is, I just moved to Florida in September and don’t really know of any places to get my cars tuned and reliable work in the area. Is there somewhere you can point me that has great service on VB Subarus for installing some things and tuning. I can do basic wrench work but when we get to a dyno clearly I don’t have one of those 😂😂 Look forward to bringing the TS by as soon as she touches down in fort Myers 🤙🏼

• 
  @ohtaniisthegoat57586 күн бұрын

  They don’t make a fuse where when the light turn on the badge turns on and when you turn it off it turns off to

• 
  @marcosmerced74006 күн бұрын

  Do these rear fog lights function with other cars like Hondas

• 
  @Unknownuser05157 күн бұрын

  Hated VA wing at the first But now VA wing gives good proportion

• 
  @SickPigeon7 күн бұрын

  Installed the clear set yesterday, I’m pretty happy with them but they aren’t a perfect fit. If you’re super picky you may want to modify the holes just a little. They may sit in the area more flush. The wires sure seem pinched also. I have not tried this yet. The CLEAR SET does not have the C style light pattern. Instead it’s individual lights, you can see light pattern in the webpage but an on the car example should have been included in this video because it is different enough. Also I had to remove my bumper to install a ecohitch so removing the reflectors was super easy from behind. But I only mention this because I was able to see the light kit installed from behind. Although I pushed through in the lights into the holes quite hard I still had to get a small screwdriver to pull clips farther through to be completely locked in. Hopefully this can be done from under the car with bumper remaining on car. I DO NOT RECOMMEND TAKING OF REAR BUMPER UNLESS YOU NEED TO FOR ANOTHER PROJECT. I did a harness on each side, super easy but it is a bit more to tuck away behind lights. I found tucking them down was the best to fit taillights back to proper spot easily. I have a silver WRX and just didn’t like the red reflector on the silver cars for some reason. The bumper is a bunch of black and didn’t want to black it out creating more black but I do appreciate the clean look of the black ones. The clear lenses look good on the silver cars in my opinion. Hopes are that they will be sufficient enough light and I can black out taillights in clear lenses area.

• 
  @bass_backupvocals7 күн бұрын

  How about the install for the lux yellow lenses and its own switch which is included in this package

• 
  @reillypritchett145420 сағат бұрын

  I been waiting on that for a while

• 
  @Illzbury_dopeboy7 күн бұрын

  Is there a blind spot and heated option ?

• 
  @uncletj18 күн бұрын

  That lip! You ship to Australia?

• 
  @jedwin48168 күн бұрын

  More "garnish" - how about some go- fast parts for a change?

• 
  @_JoeyBagODonuts8 күн бұрын

  Do the reflectors still work as an OEM reflector if I don’t want to use the light function? I thought I saw clear ones on the website. I would be interested in the clears but I don’t want the light function.

• 
  @eb56718 күн бұрын

  It’s gonna take me a while to buy all this for my 2023 WRX 😅

• 
  @murmsuniversalrobotics39388 күн бұрын

  Sound was a bit off for some reason during this video.

• 
  @trailheadmedia55788 күн бұрын

  Let me know once you start doing exhaust mods and the p0420 code arrives 😂

• 
  @bossws69 күн бұрын

  What if you need to take off the bumper again could the lights be disconnected without having to disconnect the yellow wire

• 
  @ImportImageRacing9 күн бұрын

  This is a really great question! The Bezel lighting has been updated to include total plug-n-play connectors. This allows you to simply press and release a clip to separate the wiring for future service.

• 
  @SimbaTheGreat9 күн бұрын

  I run the Silvers NeoMax and absolutely love them. Highly recommend

• 
  @ImportImageRacing9 күн бұрын

  Awesome! It’s on ALL of our personal cars! 🤘🏻

• 
  @laurencejoaquin367511 күн бұрын

  3:36 *dong* 🤦

• 
  @MaxRank11 күн бұрын

  I assume this oil is good for the 2022 scoobie also?

• 
  @SavageBluetick12 күн бұрын

  Send it!

• 
  @ImportImageRacing12 күн бұрын

  I WILL!!!! 🏁🏁🏁

• 
  @HunterB73812 күн бұрын

  Cable shifters 😂

• 
  @jameskocks473413 күн бұрын

  great video!

• 
  @TennisMan9313 күн бұрын

  Was the sounds clip with stock cats?

• 
  @geraldboylan563513 күн бұрын

  😊 nice … all about customer service and satisfaction!

• 
  @44actual13 күн бұрын

  And people wonder why I choose you guys over AFD

• 
  @Jaytheman-yk5bw14 күн бұрын

  I use a Perrin old school vacuum valve and listen to your tuner . Plus electronics and heat equal failed parts at the end.

• 
  @BOOSTEDDESIGNSWRX14 күн бұрын

  Torque specs?