Hi there viewers. This is just a simple channel where i will be uploading helpful videos and 'How-to' videos of bikes and cars. stay tuned for more videos.
FYI you don't have to take the fairing off to do the oil change on the gen 4 ZX10r, you can do it all from under the bike. Took me about 10 minutes to do mine.
@ZH2_DAN10 ай бұрын
ALL HAIL THE ZX10R… And this guy for making a great video for all of us nice ppl.
@jessejbueno3 жыл бұрын
Thanks for the video. Now I feel I can tackle this project tomorrow on my bike.
@Ternesio_Terys3 жыл бұрын
Idiot first make sure u can fill her up and change the oil filter, otherwise if u drain her in that instant and it’s not possible to fill her up again ,because they are stuck for some reason. Then u got a moving issue👍
@divinephotography96483 жыл бұрын
And what makes you think I didn’t check? If the video was helpful, which is probably why you watched it, give it a thumbs up. If you don’t like something, suggest it in a nicer way or scroll on.... keyboard warriors eh.
@rulemakerR3 жыл бұрын
You fucked up the kithen with holes 🤣🤣 idiots
@zh854 жыл бұрын
3.3 liters = 3.48 US Quarts
@zh854 жыл бұрын
no need to remove fairings, just go under neath and its very easy.
@divinephotography96484 жыл бұрын
ZH absolutely... but for complete ease of access and to film it... easier to remove fairings.
@zh854 жыл бұрын
@@divinephotography9648 Maybe for filming but i have a 2013 zx10r and a 2019 zx4r and i have NEVER removed the fairings....just put them on the stands and use a oil filter wrench and put 2 to 4oz of Marvel mystery oil conditioner. Good video editing by the way.
@sunagurbuz33154 жыл бұрын
Cant figure out how to remove the baffle. There is one bolt to the left but it seems to be welded. Can you explain how you removed the baffle?
@TheChride4 жыл бұрын
when u only change the exhaust do u need the power commander etc? for the fuel and air
@IzanReality4 жыл бұрын
Down voted and reported for that stupid fucking music.
@NEMESIS20305 жыл бұрын
Might be an old video but I just bought a 2013 R1 and your video is fantastic - not often you find a video that is so concise - had to sign in and say well done, subscribed :)
@TheChride4 жыл бұрын
Did u get power commander for it?
@SuperbikeDiscovery5 жыл бұрын
What a great video! And excellent music!
@DriesOG5 жыл бұрын
Stupid question, The mid piping is titanium correct?
@divinephotography96485 жыл бұрын
yes it is
@parthasarathy54505 жыл бұрын
Superb detailing
@woah.montana6 жыл бұрын
It needs 4.0 not 3.86
@divinephotography96486 жыл бұрын
Montana_ 18 3.8L. In UK we use L not quartz
@cekipa80896 жыл бұрын
i love how accessible the oil filter is
@Jasonbm076 жыл бұрын
perfect, just try to decrease the volume for the music. The combo brings also part of the pipe like the video right? I mean not just the terminals?
@b2dary8906 жыл бұрын
Nice vid
@MrZidane27 жыл бұрын
thanks for posting, this help alot
@colton76087 жыл бұрын
Wat washer
@ExplorationAir7 жыл бұрын
Nice edit !
@narco831envy7 жыл бұрын
Video was on point👍🏻
@divinephotography96487 жыл бұрын
narco831envy thank you 👍🏼
@brod123137 жыл бұрын
awesome, thank u...simple and straight to the point video!
@F.ilipe17 жыл бұрын
very nice vid:) what's the track sound?🤔
@Thomazz467 жыл бұрын
Will a full akrapvic exhaust system from a 2009 fit on a 2013 model?
@richardglasco4677 жыл бұрын
amazing video Amazing
@carlosdossantos35027 жыл бұрын
Nice vid bro good job
@carlosdossantos35027 жыл бұрын
Nice vid bro good job
@YostLife8 жыл бұрын
Thank you
@livnastro8 жыл бұрын
Good vid. If you want to do without the smoke wrap your headers with tin foil.
@divinephotography96488 жыл бұрын
Thank you. Yea I have only recently stumbled upon the tin foil trick. Thanks for the advice.
@marko3088 жыл бұрын
Good video, just a tip use a k and n oil filter it's got a 17mm nut on the end same as the sump plug so it unbolts! So much easier
@rickycalderon51638 жыл бұрын
what happens. if i just unplug the cables and tight them somewhere in there
@XxAtomic646xX7 жыл бұрын
the same result, OP just made it a bit cleaner but it'll work the same
@rickycalderon51638 жыл бұрын
what happens. if i just unplug the cables and tight them somewhere in there
@divinephotography96488 жыл бұрын
Nothing at all. Essentially the same thing. Except you will have 2 long cables acting as a potential risk. They were removed purely from a safety stand point. I wouldn't want cables flying loose at 160mph.
@rickycalderon51638 жыл бұрын
I did it but left the cables w a few tie wraps on it no engine light turn on
@divinephotography96488 жыл бұрын
+Ricky Calderon The cables have nothing to do with the engine light. The cables are removed because with a replacement exhaust you don't need the valve control. The cables are removed purely for safety.
@desmondliew6888 жыл бұрын
+Divine Photography What does the valve control do for the stock exhaust??
@divinephotography96488 жыл бұрын
It helps reduce low end judders at lower rpms
@-shapesh1ft3r358 жыл бұрын
Big THX for the tutorial. My TBR M2 rocks :)
@ridewarrior99178 жыл бұрын
removing the panels can be troublesome especially the bottom snap bolt plug due to sand and dust. useful tips: turn the handle towards left, n it gives some space behind the front wheel. from there, use 2 extension of ratchet spanner n u can remove the oil filter from the front of fearing (behind the front wheel). save significant amount if time from removing and replacing the fairing
@wesley920438 жыл бұрын
Hi ! What past it that? I can't find it
@richardgiacobbe8 жыл бұрын
hola, saludos, que tipo de aceites le colocas? mineral? semisintetico? 20w50?
@johndo75408 жыл бұрын
what plastic is that over your rear tire?
@williamhigareda93728 жыл бұрын
Hello i really want to take my stock off but I heard you lose low end torque is that true? Please help.
@divinephotography96488 жыл бұрын
+William Higareda Hey William. Its not considerably noticeable. however if it does bug you then you can change up the sprockets. I think 2+ 1- or the other way around.
@williamhigareda93728 жыл бұрын
+Divine Grace thank you
@SuperbikeOtaku8 жыл бұрын
Very helpful. Really appreciate your video. Saved me a trip to the dealership and saved me some money too. Yeah!
@austinlee8078 жыл бұрын
best detailed video that I've seen yet! thank you sir!
@t.c.x.s.t.x.28779 жыл бұрын
hey what about the popping flames vid?
@divinephotography96489 жыл бұрын
+T.C.X. S.T.X. haha. never got round to it my friend. i have some short clips of it spitting flames captured on my phone but nothing worthy of an upload. Im hoping to upload videos of my ZX10 spitting flames.
@t.c.x.s.t.x.28779 жыл бұрын
oh sweet sounds awesome
@divinephotography96489 жыл бұрын
roadrash510 Thank you mate. Im glad you like it and hope it helped.
@CallMeOGS9 жыл бұрын
Does the stock exhaust have race baffles because mine didn't sound like that.
@hans2morales9 жыл бұрын
Thanks!
@SilenceThis9 жыл бұрын
Though great instruction I found that you don't need to completely remove the servo motor, just get it out enough to take out the cables and then reinstall it.
@divinephotography96489 жыл бұрын
John Price I completely agree, just easier for viewers to see clearly what I am doing when taken out. Glad you found it a good video mate.
@lexacost9 жыл бұрын
did you just removed the noise cancelling cables and put the reservoir motor back in ?
@divinephotography96489 жыл бұрын
Yes mate. Plugging the motor back in will ensure no warning lights pop up on your dash.
@Termi-Motovlogs9 жыл бұрын
Whats the strange whistle when you let off the throttle? Could it be the Flux Capacitor or the Space Time Continuum?? Joking aside what is it, sounds kinda cool.
@divinephotography96489 жыл бұрын
+Termi No idea my friend. The camera is probably catching the high pitched air getting sucked in i guess...
@jimbo809827 жыл бұрын
It's probably the injectors. They'll be pulling air in at high pressure (as you say) and making that noise.
@liquidshade9 жыл бұрын
I have to say, the way you have created this video is incredible... you made this task so simple, so clear, so easy to follow it's unreal. The editing, music and narratives are just amazing. You've earned yourself a sub with this one. Keep up the great R1 tutorials!
Пікірлер
Shiddy video ..lame
FYI you don't have to take the fairing off to do the oil change on the gen 4 ZX10r, you can do it all from under the bike. Took me about 10 minutes to do mine.
ALL HAIL THE ZX10R… And this guy for making a great video for all of us nice ppl.
Thanks for the video. Now I feel I can tackle this project tomorrow on my bike.
Idiot first make sure u can fill her up and change the oil filter, otherwise if u drain her in that instant and it’s not possible to fill her up again ,because they are stuck for some reason. Then u got a moving issue👍
And what makes you think I didn’t check? If the video was helpful, which is probably why you watched it, give it a thumbs up. If you don’t like something, suggest it in a nicer way or scroll on.... keyboard warriors eh.
You fucked up the kithen with holes 🤣🤣 idiots
3.3 liters = 3.48 US Quarts
no need to remove fairings, just go under neath and its very easy.
ZH absolutely... but for complete ease of access and to film it... easier to remove fairings.
@@divinephotography9648 Maybe for filming but i have a 2013 zx10r and a 2019 zx4r and i have NEVER removed the fairings....just put them on the stands and use a oil filter wrench and put 2 to 4oz of Marvel mystery oil conditioner. Good video editing by the way.
Cant figure out how to remove the baffle. There is one bolt to the left but it seems to be welded. Can you explain how you removed the baffle?
when u only change the exhaust do u need the power commander etc? for the fuel and air
Down voted and reported for that stupid fucking music.
Might be an old video but I just bought a 2013 R1 and your video is fantastic - not often you find a video that is so concise - had to sign in and say well done, subscribed :)
Did u get power commander for it?
What a great video! And excellent music!
Stupid question, The mid piping is titanium correct?
yes it is
Superb detailing
It needs 4.0 not 3.86
Montana_ 18 3.8L. In UK we use L not quartz
i love how accessible the oil filter is
perfect, just try to decrease the volume for the music. The combo brings also part of the pipe like the video right? I mean not just the terminals?
Nice vid
thanks for posting, this help alot
Wat washer
Nice edit !
Video was on point👍🏻
narco831envy thank you 👍🏼
awesome, thank u...simple and straight to the point video!
very nice vid:) what's the track sound?🤔
Will a full akrapvic exhaust system from a 2009 fit on a 2013 model?
amazing video Amazing
Nice vid bro good job
Nice vid bro good job
Thank you
Good vid. If you want to do without the smoke wrap your headers with tin foil.
Thank you. Yea I have only recently stumbled upon the tin foil trick. Thanks for the advice.
Good video, just a tip use a k and n oil filter it's got a 17mm nut on the end same as the sump plug so it unbolts! So much easier
what happens. if i just unplug the cables and tight them somewhere in there
the same result, OP just made it a bit cleaner but it'll work the same
what happens. if i just unplug the cables and tight them somewhere in there
Nothing at all. Essentially the same thing. Except you will have 2 long cables acting as a potential risk. They were removed purely from a safety stand point. I wouldn't want cables flying loose at 160mph.
I did it but left the cables w a few tie wraps on it no engine light turn on
+Ricky Calderon The cables have nothing to do with the engine light. The cables are removed because with a replacement exhaust you don't need the valve control. The cables are removed purely for safety.
+Divine Photography What does the valve control do for the stock exhaust??
It helps reduce low end judders at lower rpms
Big THX for the tutorial. My TBR M2 rocks :)
removing the panels can be troublesome especially the bottom snap bolt plug due to sand and dust. useful tips: turn the handle towards left, n it gives some space behind the front wheel. from there, use 2 extension of ratchet spanner n u can remove the oil filter from the front of fearing (behind the front wheel). save significant amount if time from removing and replacing the fairing
Hi ! What past it that? I can't find it
hola, saludos, que tipo de aceites le colocas? mineral? semisintetico? 20w50?
what plastic is that over your rear tire?
Hello i really want to take my stock off but I heard you lose low end torque is that true? Please help.
+William Higareda Hey William. Its not considerably noticeable. however if it does bug you then you can change up the sprockets. I think 2+ 1- or the other way around.
+Divine Grace thank you
Very helpful. Really appreciate your video. Saved me a trip to the dealership and saved me some money too. Yeah!
best detailed video that I've seen yet! thank you sir!
hey what about the popping flames vid?
+T.C.X. S.T.X. haha. never got round to it my friend. i have some short clips of it spitting flames captured on my phone but nothing worthy of an upload. Im hoping to upload videos of my ZX10 spitting flames.
oh sweet sounds awesome
roadrash510 Thank you mate. Im glad you like it and hope it helped.
Does the stock exhaust have race baffles because mine didn't sound like that.
Thanks!
Though great instruction I found that you don't need to completely remove the servo motor, just get it out enough to take out the cables and then reinstall it.
John Price I completely agree, just easier for viewers to see clearly what I am doing when taken out. Glad you found it a good video mate.
did you just removed the noise cancelling cables and put the reservoir motor back in ?
Yes mate. Plugging the motor back in will ensure no warning lights pop up on your dash.
Whats the strange whistle when you let off the throttle? Could it be the Flux Capacitor or the Space Time Continuum?? Joking aside what is it, sounds kinda cool.
+Termi No idea my friend. The camera is probably catching the high pitched air getting sucked in i guess...
It's probably the injectors. They'll be pulling air in at high pressure (as you say) and making that noise.
I have to say, the way you have created this video is incredible... you made this task so simple, so clear, so easy to follow it's unreal. The editing, music and narratives are just amazing. You've earned yourself a sub with this one. Keep up the great R1 tutorials!