Firearm enthusiast vlogging about various firearms, the industry, challenges and progress made. No shill content just honest feedback and discussion. Join the journey and community of trying to get better, protect our rights, and introducing this amazing sport with others.
Пікірлер
Lmao looks like the same quality I make. Exactly why I learned to make my own and have rifles that are just as nice as this at half the price. (No labor cost or increased profit margins on parts. Non-refinished wood. They put the absolute minimal time into this gun.
Lol you wish your garbage work ak’s could be even half as nice as this. You sound like you’re trying to convince yourself more than anyone else 😂
Mine shoots 3 to 4 inches low on iron sights at 8 yards, had to put a red dot on it.
Whats wrong? It’s a sig.
Better than a Glock.
Just get a Glock!!
That would be a downgrade.
I had the same problem with a xmacro tacops. With herters ammo. I changed the extractor, and it didn't help. I sent it to sig. They sent it back to me saying it's fixed, and it says they changed the extractor. I shot 100 rounds of the herters through it, and it ran fine. (It was happening alot originally) since then I've been shooting magtech, and it's been 100%. I recently shot herters through it again, and it started doing it. I stopped shooting herters through it, and it's been shooting great again. So I'm not sure what the issue is. Luckily for me it's just my range xmacro. My carry xmacro has been fine with any ammo. My xmaxro comp I had, and sold was great with all ammo. Hopefully you figure it out.
Make sure you have the right size screws in your optic
Well, you said sig
Clueless.
Buy a Glock. Sig is trash. Over rated.... Only gun I've ever sold , was a 365.
Glocks are trash.
@@johnhatchel9681 aww. Lil sig boy mad .......
@cheechtjs Not mad at all. I heard you can apply for Government Assistance to get glock ammo. You should take advantage, buddy!
@@johnhatchel9681 don't need it. Sig boys do. As they go off on their own. Don't drop it .....
@cheechtjs 🥱 Brought out that tired old lie. You must be the King👑 of the trailer park
There is nothing wrong with the gun, it is the magazines. Mine had no issues running 17 rounds, but running 17 + 1 I have a few failures to extract. These mags are very tight and hard to load when new and need to be broken in. I now have over 1,100 rounds through mine with 6 different mags and there are no longer any issues.
Mine has been working like a top
I sold my P320 for this reason. However, it just happened to my compact upper and not as frequently. The culprit is likely the extractor, it needs to be replaced IMO
No way his right screw on the optic is to long it’s no way in hell he’s get that may rounds out spring would been gone didn’t he say 500 u can’t even get through 3 test rack ejects when that’s happening some new guns not even 1 f
SMH and folks will still act as if this company can do no wrong a damn g3c is more reliable…want to charge what they charge just to put out what they b putting out but if my consumers was in denial I’d keep taking they money too 💀
The pistol smith sent it???.......... The owner grabs the phone, calls SIG CS, some questions....and this day you will have an email to send your toy. They will fix it......max 1 week and send it directly to you...... My advice: DO NOT get 3rd parties involved...the more people in the line, the more chances of dropping the ball.
Sig has been dropping the ball for a while now.
Definitely! What were people thinking making the p365 the top selling pistol of 2023? And don't get me started on glock losing that fat military contract
I don't think it's the gun. It's most likely ammo issue. Extractor is grabbing the case but not holding the case which might be too soft. Seems like it's happening with S&B ammo.
he tried 3 or 4 brands of ammo.
@@nolagospeltracts8264 looked like SB was causing this mainly
Is there any impingement from the reddot screws on your extractor rod/spring?? You may need to file down the right screw because it is too long for the slide.
Get yourself a Pistol Cleaning Rod then you can push the casing out of the breach from the barrel end.
Just the rod because u not pose to be pushing anything against the rifling
I’ve had exact same issues, but was able to chalk it up to bad ammo. From a case of 1000 rounds of Fiocchi Range Dynamics 115gr FMJ, I had about 200 rounds that failed to extract (very intermittent and random). I’m assuming it’s the ammo as I had the exact same failures on Sig m18, CZ P01, and glock 17, which are all known to be very reliable. At first I thought the chamber was too tight or dirty or slide not completely in battery causing the casing to expand and get stuck. What I found out in the last two boxes of ammo were that the cartridges were a bit long (bullet not seated far enough). They also caused failures to feed (nose up) on only the CZ P01. I’ve switched to CCI blazer brass and never had another issue with any of those guns including the p365 and it’s been over 4000 rounds now without a single malfunction (including some more Fiocchi from a new batch). Hopefully yours will come back from Sig and run perfectly.
Bummer, could be ammo? Or the dot is to heavy...lol So it's not having enough momentum to extract it. "That's just a theory as im 500 rounds in my AXG with not one malfunction. Wait 1200 rounds in? I got the impression you just got it.....now im scared. Pin coming out? What in the actual tarnation!! I paid nearly $1400 😮 and i couldn't help but think for $500 more i could own a BUL Armory
Why haven’t you contacted Sig, instead of running to the internet to complain?
If you watched the video you would know that's exactly what he did. Sent it to SIG. Some of us appreciate this kinda stuff so we can mitigate the problem or at least be aware of the problem. If anything your complaining.
Because we're a community
Sound like something a sig consumer would say y’all love hiding or pretending don’t 💩 be wrong wit these guns every time a 365 rust or 320 lose a law suit the consumers go blind and def then buy more and the company just makes another version of something and act as if nothing is going on at this point to b that overpriced for what u could get something gotta change
@@watchyoutube9553 sounds like something that someone familiar with mass manufacturing works. Sometimes a few slip through QA. When they do, the response from the manufacturer is what really matters. When my new BMW M4 had a problem. My dealership response and customer service is what mattered. They made me feel valued and they fixed it after giving me a courtesy car. Sig’s customer service is what should matter to consumers. Again we’re dealing with mass manufacturing. Let’s be real.
At the very worst buy another extractor for it, 10 minute job
@AZCactusTac Has the optic been on the entire time? If not, it's possible that one of the screws could be a bit too long, causing intermittent issues with the extractor.
I have 700 rounds through mine so far with zero issues 🤷🏻♂️. Ive used federal, magtech, fiochi, and blazer. Weird brotha
Mines butter
Not sure this is the issue but I have had issues with extraction issues due to the Right Optic screw being to long, getting into the extractor channel and causing extraction issues on my SA Echelon. I always check my optic screws now when installing to make sure they are not to long and making contact with the extractor spring/rod. Again, not saying this is your issue but one I have seen cause a similar issue with extracting rounds. And I almost always have to shorten Holosun screw I put in the right side which is above the extractor channel. When I install an optic now, I pull the extractor rod/spring out, install the optic and verify in the extractor channel I do not have any screw protrusion in it. Shadow Systems has a shortened extractor and not an issue with them but with many it could be a possible cause.
Same on my Cosaint Arms 2011… i was using Winchester 115 gr FMJs!! Switch to Blazers 115 gr and runs flawless!!! Real question is….. Whats wrong with your microphone lmfaooo!!
Ive had this exact same fte happen to me once out of the first 300 rounds. I wrote it off on ammo related. 115g magtech Thx for sharing. Please fill us in on what sig says.
And that's why i play RS2 Vietnam
Not worth the money
Not at all, it’s a romi parts kit with an ultimak…how tf is that 2300?
@@timothypeterson1903 Romanian kit. Ultimak. Adjustable gas block. 14.5 pinned barrel with keymo device that is actually aligned so you can run a suppressor. Custom trigger. Custom wood finish. Custom cerekote finish. If you bought all the parts and had someone build it for you, I’d bet it’d cost about the same amount. It’s not everyone’s jam which is totally cool, and may not be worth it to you, but the value in the gun is there.
Totaler Spam !!!!! Trotz Kanalsperre dieser Müll 💩💩💩💩💩💩💩💩💩💩💩💩💩💩
Oh man, that thing is a beast! If I lived in the states I would 100% get one of these. Happy Shootin!
Thanks man. I am lucky and look forward to working it in.
So I’m just curious. I want one but don’t know a ton about them. So Meridian Defense orders a parts kit, cleans it up a little, adds a pic rail, refinishes the wood and then charge $2300 dollars.? Am I missing something?
A glorified wasr
It's a parts kit build...so they use an american receiver either theirs or some other companies and the parts come in from decommissioned military rifles...may have force matching parts or what not from military wear and being replaced...basically the gun has alot of history but is rebuilt to like new condition...wasr10s in many ways are new production of the same thing tho minus the dimpled magwells
@@garrettpittman7374oh gotcha. Sounds cool and thanks for the info. IDK, doesn’t really sound like they are worth that much money. Maybe I’ll go with a milled arsenal.
Yeah it’s just a romi parts kit with a kns piston, ultimak rail, and combo gas block, not worth anywhere near 2300, more like 1300.
BS unboxing….FFL needs that serial number
Awesome 👏… how long did it take from placing order to delivery?
About 8 months
I purchased their "Lil Dirty" AK (76.2×39) in 2020.. took 13 months to get it. But WOW! Best purchase ive ever made. Absolutely LOVE IT!
Thats great to hear and thats a sweet rifle by the way.
congrats on your new rifle! I also have a Pestilence and it's been awesome! I'm jealous of the adjustable gas block, that's really cool! I'll be putting a KNS piston in mine soon. I shoot a wolverine on mine and its really nice. Mine actually cycles subs too which is cool. Make sure you get some shooting footage!!
Thank you. Thats great to hear. I put a Dead Air Wolverine on my Zastava Zpap and works great with Supersonic but will not cycle subs.
I just ordered a Wolverine for mine about a week ago. How's the sound?
@@godsdozer I love my wolverine, only thing thats negative is that its heavy. But it sounds great. I use it on my ak and 300 win mag. Its super impressive on the 300 win mag!
@@godsdozer Much better than I was expecting based on what I was hearing. I think you will be satisfied..
Is there too long mounting screws to the optic? Are they sticking out under the plate and twisting the adapter plate up? Or is it My eyes only?
I got my answer when look whole video to the end. Thanks.
Have one. In a word…. Awesome!!! It’s a shooter and a half. Outstanding accuracy. Took it to the range the first time and fell in love with its precision shooting. I have many pistols and this is the Best.
Stoked to hear that man. I love it more each day and recently shot my 1st competition with it.
@@AZCactusTacwas it good for competition? Would it be worth the extra penny to get 2 separate pistols, one for carry one for competition, or is this cz s2c the perfect sweet spot
@@Pnda_Bear Depends on how serious you take your competition. In this case it was my first one so I'm new to that game and in that context I found it to be a great sweet spot. If your very serious you may want to consider a more specific firearm like the CZ Shadow for example.
Don't Buy a 180 series Mini 14 181 Series and up Your Fine. The Mini 14 was Designed to be a light handy 200 yard & in utility carbine. It does what it was made to do and does it very well. most problems/complaints about the little rifle are owner/user related. It is not a sniper weapon and Never will be no matter how many parts that are replaced or gadgets that are mounted to it.
Agree. I think many try to make it into something its not. I'm really enjoying the old school look and feel and take it for what it is.
Dont do videos on a gun you know nothing about....even your found factcts are mostly bullshit!
Everytime I see a Mini-14… I just get giddy. Just love it.
I think I've joined that club
The owners manual tells you it will fire 556 with no issues call Ruger for an old one
Great idea I'll do that
Did as you suggested and yep it does state compatibility with 5.56. Thanks for the suggestion.
@@AZCactusTac your welcome mini 14 was my first rifle and still my favorite
Wish it had a decocker, if it did..I still wouldn’t be able to afford it
Wish I had seen this video earlier. My gun comes in on Monday. Should have waited. 😢
Hopefully yours will be great from the get go
@@AZCactusTac unfortunately it isn’t. The delta point pro plate is too short for the optic, so I put a Holosun on. Shot 100 rounds and the optic plate came loose and almost fell off the gun. This is after putting blue loctite, torquing the screws to 20in/lb as OA recommends. Also waited 24 hours to let the loctite set before shooting it. Have contacted Oracle arms twice via email as they don’t have a phone number. Waiting to hear back. Should have gone with the Stacatto CS.
@@assemahmed2581 Oh man that sucks and I'm sorry to hear. I'm shooting mine hard tomorrow and will be watching that plate carefully. We shall see. Get a hold of Ian in customer service. He is great and will take care of you.
Thanks for the info and video. I went platypus over this and definitely feel like either can be fine hopefully all your fixes stay working for you enjoy. Fusion is coming out with a model under 1500 I think so could be another contender as well. Are you out at Ben Avery or out other parts of the state that range looks pretty legit be well!
So far so good and hear great things about the Platypus. I shoot at Cowtown not too far from Ben Avery.
Unproven, Kinda pricey and I don’t like the look of it. For a couple hundred more I’d just as soon get a Staccato P
Interesting design and gun. Expectations seem to always be heigh for this type of gun, however just like the P365 it maybe good to wait on a new release to work out the bugs.
Looks good in fde👍
It does!
Can’t be fired left handed. If something happens to your right it’s over.