Boa tarde! Não consigo ativar o painel de propriedades! Poderia me ajudar? Só está visível o console e árvore de entidades. Me instruíram para que eu olhasse na parte inferior esquerda para alternar entre botões mas, também não está visível na parte inferior. Já desinstalei e reinstalei o cloudcompare e não tive sucesso...
@viniciusschmitdelima25464 ай бұрын
Prezado, tudo bom?! Se ainda não conseguiu solucionar a questão posso tentar ajuda-lo. Abraço!
@janiofreitas30744 ай бұрын
@@viniciusschmitdelima2546 Bom dia, ficaria muito agradecido mesmo, ainda não consegui.
@janiofreitas30743 ай бұрын
Bom dia! Prezado, consegui resolver o problema, e é tão fácil que nem imaginava. Basta ir em ; Exibir... redefinir todas as posições dos elementos da interface. De qualquer forma, muito grato pelo interesse em me ajudar! @@viniciusschmitdelima2546
@hikikomorihachiman74914 ай бұрын
if you have 364 data, why using n= 365?
@topomatters4 ай бұрын
Good stuff, thank you!
@mohanrmk6 ай бұрын
james do you have any sample las files . i need to learn cloud compare .
@JamesDietrich_geo6 ай бұрын
Lots of sample datasets are available from OpenTopography - portal.opentopography.org/datasets
@aritradutta87787 ай бұрын
Biggest brain I have ever seen
@ash19838 ай бұрын
Great video! Thank you very much. :)
@binataroy55810 ай бұрын
Great video! Many thanks!
@user-bp8mg2kh3h10 ай бұрын
Thank you
@user-bp8mg2kh3h10 ай бұрын
Thanks so much for tutorial.
@shadialathamneh10 ай бұрын
Thank you, How did you register the two clouds together in this case? specially you have very limited number of points from total station around 800 ?? probably the auto registration won't work very well ?
@anttiv710911 ай бұрын
So pointsource id is a number that starts from 1 (or 0?) and gets +1 every time the lidar does a sweep?
@user-pz8ro2dn9u11 ай бұрын
Nce vid! But i was wondering why my las files are not rendering in cloud compare. I have a different version though, using v2.13. Can you help? Thanks
@LiDARs Жыл бұрын
Is there a way to do callouts or annotations to the scalar field?
@ericfowler4692 Жыл бұрын
Not getting PCD files to open - how come?
@constantinemel997010 ай бұрын
I installed CC (stable release: 2.12.4 Kyiv (7/14/2022)) on Fedora 38 and it opens .pcd files.
@SamtheIrishexan Жыл бұрын
Super cool and bananas at the same time. This Gorge will be the start of a huge shift in how we think these sorts of features are made. Slow and steady, nope try 6 days.
@mikegrieder3528 Жыл бұрын
Great tutorial, thank you
@jairoescobar8545 Жыл бұрын
Great job! The point cloud looks good. What equipment do you use and what software processing?
@janblahovec377 Жыл бұрын
Hey, please how to solve the slope problem when the points appear higher than they really are.
@mastermind8437 Жыл бұрын
Not sure if you still do this since the video is two years old. All of my las lidar files are miles long. We are a mobile mapping company. We have LAS and 360° Video for whole roads. When I bring it into cloud compare even with suggestion I get a straight line that I can not seem to zoom far enough into to see the data.
@jonnyj3068 Жыл бұрын
Great videos thanks so much for the help
@user-ee6jj9qn9t Жыл бұрын
simple and clear, thanks bro
@mixfacts4336 Жыл бұрын
Gud content, thanks for this tutorial
@keytv2666 Жыл бұрын
You saved me hours from having to remove spacing manually. Thank you so much!
@shirfoox Жыл бұрын
Great tutorial, thank you very much :)
@mahmoodalamkhan1410 Жыл бұрын
This video discussing single timeseries.. Thank you.. But if we have multiple streamflow timeseries for the same river derived based on different RCPs or SRES, how can the same be placed?
@liamboyle9199 Жыл бұрын
So for some reason my point IDs are not exporting with my txt or csv files.. is that normal???
@hadirahmoun9562 Жыл бұрын
Hi Can I tell what each color means?
@effahderrick40782 ай бұрын
yes, by classifying them
@sayris012 жыл бұрын
Thank you for your work! :)
@sayris012 жыл бұрын
Thank you! well explained :) cheers
@RakhiKumari-ux7dk2 жыл бұрын
In my case, highest P value is 85.125. How can I calculate Q90? I have follow all your steps.
@Xanngysl2 жыл бұрын
Hi James, fantastic work, so you have any tutorial to made a good DTM?
@billyg67022 жыл бұрын
These videos are invaluable. Thank you for posting
@andresagudelo22972 жыл бұрын
Hi, I have a .obj file with its .mtl file but I don't know how to drag both into CC in a way that the model get colorized. Have you any idea about how can I do that?
@johnbriggs75142 жыл бұрын
Very well done and informative.
@hudsonchalmers65042 жыл бұрын
Best Tutorial I have ever seen
@jofifer2 жыл бұрын
where did you bought the filters?
@fujihinohara10462 жыл бұрын
So Informative!! GREAT Tutorials!!
@Zaynabsaka2 жыл бұрын
Hello , I have a point cloud that has a stream flowing across it, How do I digitize our the stream area like you have in your video
@Zaynabsaka2 жыл бұрын
Hello, How do I digitize out the stream line like your data from the two years. I am using cloud compare. I want to extract the stream line
@effahderrick40782 ай бұрын
You can use the segment tool to extract the stream out of the original point cloud
@jayadeepgs74622 жыл бұрын
Hi, thank you for the amazing video !! I have a folder full of CSV files ( cloud point files ) and I want to convert them to the PCD format using CloudCompare on my windows machine. How can I do it using the Cloud compare application or from the command line ? Please help .
@ra_jennysiagian71962 жыл бұрын
how to get the distance of the point cloud ?
@gggggggggggggggg6482 жыл бұрын
Tools ->Point picking
@Gorgious2 жыл бұрын
Thanks ! very thorough and professional tutorial. :)
@ismailyalcn7502 жыл бұрын
Nice video
@user-nd5ym6yb7q2 жыл бұрын
Thank you very much for your nice tutorials!
@jsmythib2 жыл бұрын
It appears to function. Nice print btw- Neat design.
@coolguy0823 жыл бұрын
I’m going tubing there tomorrow! We just had a ton of rain so hopefully it’ll be good
Пікірлер
Fantastic video, thank you.
Need your help please gibe me your contact
Great tutorial, thanks
thank you ❤
Boa tarde! Não consigo ativar o painel de propriedades! Poderia me ajudar? Só está visível o console e árvore de entidades. Me instruíram para que eu olhasse na parte inferior esquerda para alternar entre botões mas, também não está visível na parte inferior. Já desinstalei e reinstalei o cloudcompare e não tive sucesso...
Prezado, tudo bom?! Se ainda não conseguiu solucionar a questão posso tentar ajuda-lo. Abraço!
@@viniciusschmitdelima2546 Bom dia, ficaria muito agradecido mesmo, ainda não consegui.
Bom dia! Prezado, consegui resolver o problema, e é tão fácil que nem imaginava. Basta ir em ; Exibir... redefinir todas as posições dos elementos da interface. De qualquer forma, muito grato pelo interesse em me ajudar! @@viniciusschmitdelima2546
if you have 364 data, why using n= 365?
Good stuff, thank you!
james do you have any sample las files . i need to learn cloud compare .
Lots of sample datasets are available from OpenTopography - portal.opentopography.org/datasets
Biggest brain I have ever seen
Great video! Thank you very much. :)
Great video! Many thanks!
Thank you
Thanks so much for tutorial.
Thank you, How did you register the two clouds together in this case? specially you have very limited number of points from total station around 800 ?? probably the auto registration won't work very well ?
So pointsource id is a number that starts from 1 (or 0?) and gets +1 every time the lidar does a sweep?
Nce vid! But i was wondering why my las files are not rendering in cloud compare. I have a different version though, using v2.13. Can you help? Thanks
Is there a way to do callouts or annotations to the scalar field?
Not getting PCD files to open - how come?
I installed CC (stable release: 2.12.4 Kyiv (7/14/2022)) on Fedora 38 and it opens .pcd files.
Super cool and bananas at the same time. This Gorge will be the start of a huge shift in how we think these sorts of features are made. Slow and steady, nope try 6 days.
Great tutorial, thank you
Great job! The point cloud looks good. What equipment do you use and what software processing?
Hey, please how to solve the slope problem when the points appear higher than they really are.
Not sure if you still do this since the video is two years old. All of my las lidar files are miles long. We are a mobile mapping company. We have LAS and 360° Video for whole roads. When I bring it into cloud compare even with suggestion I get a straight line that I can not seem to zoom far enough into to see the data.
Great videos thanks so much for the help
simple and clear, thanks bro
Gud content, thanks for this tutorial
You saved me hours from having to remove spacing manually. Thank you so much!
Great tutorial, thank you very much :)
This video discussing single timeseries.. Thank you.. But if we have multiple streamflow timeseries for the same river derived based on different RCPs or SRES, how can the same be placed?
So for some reason my point IDs are not exporting with my txt or csv files.. is that normal???
Hi Can I tell what each color means?
yes, by classifying them
Thank you for your work! :)
Thank you! well explained :) cheers
In my case, highest P value is 85.125. How can I calculate Q90? I have follow all your steps.
Hi James, fantastic work, so you have any tutorial to made a good DTM?
These videos are invaluable. Thank you for posting
Hi, I have a .obj file with its .mtl file but I don't know how to drag both into CC in a way that the model get colorized. Have you any idea about how can I do that?
Very well done and informative.
Best Tutorial I have ever seen
where did you bought the filters?
So Informative!! GREAT Tutorials!!
Hello , I have a point cloud that has a stream flowing across it, How do I digitize our the stream area like you have in your video
Hello, How do I digitize out the stream line like your data from the two years. I am using cloud compare. I want to extract the stream line
You can use the segment tool to extract the stream out of the original point cloud
Hi, thank you for the amazing video !! I have a folder full of CSV files ( cloud point files ) and I want to convert them to the PCD format using CloudCompare on my windows machine. How can I do it using the Cloud compare application or from the command line ? Please help .
how to get the distance of the point cloud ?
Tools ->Point picking
Thanks ! very thorough and professional tutorial. :)
Nice video
Thank you very much for your nice tutorials!
It appears to function. Nice print btw- Neat design.
I’m going tubing there tomorrow! We just had a ton of rain so hopefully it’ll be good