Пікірлер

• 
  @LindaCornwell-n7vКүн бұрын

  What if lm cooking my Jerry on 145 how long does it take to cook

• 
  @haparoundthehouse661823 сағат бұрын

  dont really know-keep an eye on it as you don't want to 'cook' it you want to dry it

• 
  @MlAn-wp9vdКүн бұрын

  How did you decide where the holes should go?

• 
  @haparoundthehouse661823 сағат бұрын

  looked at the angle of the cement pad and decided to put the holes near the largest defect-keeping in mind the closeness of the edge as the foam will blow out-in other words i guessed

• 
  @MlAn-wp9vd2 сағат бұрын

  @@haparoundthehouse6618thank you!

• 
  @jonathonkennedy93218 күн бұрын

  Glad I bought the right stuff. Need my tub fixed until I can get to town and buy a new tub. Considering I live in the bush that’s quite a chore 😊

• 
  @haparoundthehouse66188 күн бұрын

  i had good luck with it- thanks for watching

• 
  @noey57669 күн бұрын

  Boy, you are a Godsend. Thank youi!!!

• 
  @haparoundthehouse66189 күн бұрын

  works great thanks for watching

• 
  @sanjuanitacasarez723122 күн бұрын

  Thank you sooo much! You have been very helpful. I am ready to use your technique on my driveway.

• 
  @haparoundthehouse661821 күн бұрын

  take an afternoon and a whole bunch of spray foam cans and give it a shot-thanks for watching

• 
  @AlbertFrederickLarunАй бұрын

  That is the finest sink strainer nut I have ever seen, sir. 04:55 "...all sorts of things to make you swear." Indeed.

• 
  @1965nterpАй бұрын

  Here's an idea contact the company for a replacement cap they'll probably just give you one

• 
  @haparoundthehouse6618Ай бұрын

  give-your funny

• 
  @1965nterpАй бұрын

  ​@@haparoundthehouse6618 I have a black and decker medium size food processor the container cracked I contacted them via Facebook I attached a pic i asked for a replacement container, they sent me a new food processor, no charge

• 
  @stanleyhasting6047Ай бұрын

  Mine will not move forward or back, clutch adjustment? I don't see a way to adjust the clutch or it might be a trans issue? It just happened while in the field. Trans is not stuck it grided a little like it wanted to go then nothing.

• 
  @haparoundthehouse6618Ай бұрын

  I don't remember an adj in the clutch-does the pedal feel 'normal"? I have a 'bad trans' right now, in fact the tranny from the video is now bad enough to remove the shifter weld up the "button" and grind it down to original specs. As you use the shifter it wears and with enough wear it will indeed get stuck in neutral. THis is were I'm at and sounds like where you are at as well. www.stractors.com/t92-transmissions/ this is a brief summary of how to repair the shifter. I already repaired a spare transmission shift linkage and will repair the trans from the video after the mowing season. The repair isn't too difficult if you are handy-good luck, my guess is you have a worn shifter button- you more than likely could try removing the top of the tranny and smacking it around-more than likely could give you some more run time until it locks up again

• 
  @keithwarkentinАй бұрын

  I just thought I would share with you that if you have leaks and you’re not running it in winter you could run 140 w oil and it being thicker it would maybe stay in a little longer I tend to use it on the steering boxes on my Ford 8N’s and if they are too leaky I use STP engine oil additive the sad part is I have the seals but I don’t have the time 😀🇨🇦

• 
  @haparoundthehouse6618Ай бұрын

  the trans do leak-l'll have to try that. Thanks for the info-

• 
  @orboakin8074Ай бұрын

  Dumb question: Can I flare lines that are not exactly perfectly straight? I have some already flared and connectwd lines on my master cylinder but they are leaking. I want to buy this tool and simply make new flares on those lines instead of ordering and waiting for new lines to arrive. Is that a good option

• 
  @haparoundthehouse6618Ай бұрын

  as long as the line has a portion straight enough to go into the clam shell-I haven't tried that, but if it were my car I would definitely give it a shot

• 
  @orboakin8074Ай бұрын

  @@haparoundthehouse6618 thanks, friend👍👍

• 
  @dennisportillo4185Ай бұрын

  Does it try hard or more like rubbery? If it’s rubbery would epoxy stick to it?

• 
  @haparoundthehouse6618Ай бұрын

  rubbery and epoxy won't stick to it

• 
  @terryfowler6090Ай бұрын

  The hard part is digging out the remains of the old buffer😊

• 
  @haparoundthehouse6618Ай бұрын

  yes-the material used by the manufacture was cheap and not well suited for the rifle-thanks for watching

• 
  @valkyrie_offlineАй бұрын

  Do you think this would be good to fill a small hole in a bathtub? The size of a dime.

• 
  @haparoundthehouse6618Ай бұрын

  Im almost certain you would have to have some sort of backing to ensure the epoxy doesn't just fall through the hole. I'd use dry wall mesh or if you cant get to the back side I would use a silicone caulk to fill the hole then remove enough caulk to get a decent amount of epoxy. I would give it a try---

• 
  @HIPPIE-vx5geАй бұрын

  I got a 1974 power king economy tractor it was gave to me it has a14 hp Kohler cast-iron engine and I took it off it n and i took it all part to sand it down to paint it I had to sand off all the decals and I can’t find new ones for it the power king going down the middle of the hood and then it had economy on both sides on the hood. I sanded it all down. I painted it pink and black to my girlfriend could have her at TRACTOR and they are one tough TRACTOR, I said I got the tiller the plow and the snow on deck with buddy gave it to me. He bought it brand new 1974. Send me a picture. Show me how the springs hook up to the front POLICE boats underneath the front of it I’d appreciate it cause I can’t remember how to put it back on

• 
  @haparoundthehouse6618Ай бұрын

  shot a video-kzread.info/dash/bejne/paFhm7qIhdy7qsY.html

• 
  @HIPPIE-vx5geАй бұрын

  Can you show me police at both to the front of the tractor and where the springs hook and how it bolts up, you could show me a picture of that. I’d appreciate it and thank you.

• 
  @krzysztofopalinski-bs5ofАй бұрын

  Foregive me if Im wrong but how come you offroad with these tires? It's not reliable I guess. Need offroad tires to do it right

• 
  @haparoundthehouse6618Ай бұрын

  The idea was to demo a normal tire in these conditions-thanks for watching

• 
  @krzysztofopalinski-bs5ofАй бұрын

  @@haparoundthehouse6618 oh, ok. Thank you for video. I love this car 🙂

• 
  @haparoundthehouse6618Ай бұрын

  @@krzysztofopalinski-bs5of they seem to be well built-get decent gas mileage

• 
  @RichieRichRangers2 ай бұрын

  Great video. Thank you for posting. You’re like me and drywall mud…can’t just leave it alone!😂

• 
  @haparoundthehouse66182 ай бұрын

  i hear ya

• 
  @RichieRichRangers2 ай бұрын

  Please don’t take my prior comment the wrong way. We have a patio table made of pvc fittings for legs and a fiberglass table top. We purchased it in 1994. It’s amazing how it’s held up with the exception of some small chips on the top. Anyway my wife purchased the kit based on your video today, I applied it, waited an hour, sanded it. It looks amazing. Again thank you and god bless you.

• 
  @haparoundthehouse66182 ай бұрын

  @@RichieRichRangers no worries-thank you for watching

• 
  @pamelaroliva85012 ай бұрын

  I just ran a screw through the front of the handle into the broken part

• 
  @haparoundthehouse66182 ай бұрын

  nice

• 
  @bobbymolak33642 ай бұрын

  Thank You So Much for the information, we’ve been struggling like crazy to flare some 1/4 inch stainless brake lines in chassis and hopefully will succeed with your information that you provided in your videos … just orderd this tool . Will keep you posted . Make It A Great Day Everyone ❤️🙏✌🏼

• 
  @haparoundthehouse66182 ай бұрын

  I had good luck with SS-hope it turns out good

• 
  @stevefick39192 ай бұрын

  I just bought a flaring tool from Amazon, and the "OP1" is pointed at the wrong end! Good thing I watched your video.

• 
  @haparoundthehouse66182 ай бұрын

  sounds like there is very strict quality control at the factory-thanks for watching

• 
  @smithy24622 ай бұрын

  Great stuff.

• 
  @haparoundthehouse66182 ай бұрын

  Glad you enjoyed it

• 
  @smithy24622 ай бұрын

  What i was looking for, thanks brother.

• 
  @haparoundthehouse66182 ай бұрын

  Glad you could use it-

• 
  @geoffreyhollins88532 ай бұрын

  Gor gonzalla batman😊

• 
  @smartphonerepairwi7752 ай бұрын

  Great video description.

• 
  @haparoundthehouse66182 ай бұрын

  Glad you enjoyed it

• 
  @GigglingButterfly-yl3fd2 ай бұрын

  The best part “You got a little puke color” 😂😂 thank you so much for sharing your video to help the rest of us and thank you for having a good personality

• 
  @haparoundthehouse66182 ай бұрын

  thank you for watching

• 
  @garrett6212 ай бұрын

  Thank you sir.

• 
  @haparoundthehouse66182 ай бұрын

  thanks for watching

• 
  @sergioalfonsobojorquezcord8242 ай бұрын

  Si se da vuelta el el mar como no es abierto

• 
  @r.m.b.62032 ай бұрын

  Awesome video. Very informative

• 
  @haparoundthehouse66182 ай бұрын

  thanks for watching

• 
  @thecorbettchronicles3 ай бұрын

  🤣🫠 I was yelling at you through the screen to leave it 😂🤣 looks decent! Thanks for sharing

• 
  @haparoundthehouse66183 ай бұрын

  Didn't have to replace the sink-came out nice. Thanks for watching

• 
  @KINGMUFASA3 ай бұрын

  So is it like a software that you install on the PCM of the car? If so, how to install?

• 
  @haparoundthehouse66183 ай бұрын

  I don't understand the question

• 
  @KINGMUFASA3 ай бұрын

  @@haparoundthehouse6618 I mean, for the TSB, how do we install it? Is it a software update or a physical repair done at the dealership? If so, do we download the PDF and then what? I am just trying to understand the procedure of instillation.

• 
  @haparoundthehouse66183 ай бұрын

  @@KINGMUFASA A TSB is just a piece of paper uploaded to a digital document (PDF)- its just info, in my case it informed me that toyota didn't program the computer correctly and didn't recall the car and was forced to put out this info as toyota service bays couldn't fix it . there maybe TSB that will allow the average home mechanic to fix their car (like change/adjust a defective part)-in my case I would still have to have toyota reprogram and no this can't be done at home-you got to pay toyota

• 
  @KINGMUFASA3 ай бұрын

  @@haparoundthehouse6618 Ohh, I see. Thanks so much. 👌

• 
  @TheJdeweys3 ай бұрын

  Do u think this woukd fix a crack in an acrylic plastic shower wall?

• 
  @haparoundthehouse66183 ай бұрын

  without seeing the crack its hard to say-

• 
  @Wheetlelol3 ай бұрын

  Thanks

• 
  @haparoundthehouse66182 ай бұрын

  Welcome

• 
  @pl56243 ай бұрын

  Also sold by eastwood.

• 
  @haparoundthehouse66182 ай бұрын

  true

• 
  @billy2bob633 ай бұрын

  I have water coming out my AAV when draining my kitchen sink now it just started. Used a good drain cleaner today a n d water flows down the sink great from the spigot but if pulling the plug after doung dishes it want to come out the vent valve unless you slow the flow down. Im stumped not a plumber but a old car mechanic and truck driver 🤣 Any ideas?????

• 
  @haparoundthehouse66183 ай бұрын

  Sounds like a restriction in the drain pipe-Or and much more unlikely is a partial main vent blockage. are any other drains that are acting up? I would suggest snaking the pipe. Have you tried blistering hot water down the pipe (in case its hardened grease?)

• 
  @billy2bob633 ай бұрын

  @@haparoundthehouse6618 No other drains in the house acting like that. I used a quality drain cleaner today and let it sit for a hour then boiled some hot water to flush it out. It helped maybe try again tomorrow. I just can't see how a clog in the trap can cause water to flow out of that air valve.

• 
  @haparoundthehouse66183 ай бұрын

  @@billy2bob63 My bet is there is a blockage after the trap. I would pick up a snake long enough to get into the 4" pipe. Do you have cast iron or PVC?

• 
  @billy2bob633 ай бұрын

  @haparoundthehouse6618 PVC in a 25 year old mobile home that I purchased new.

• 
  @haparoundthehouse66183 ай бұрын

  @@billy2bob63 I'd snake it-

• 
  @oscarcortez94523 ай бұрын

  Thanks for the review

• 
  @haparoundthehouse66183 ай бұрын

  great tool especially if there is no room for larger tools

• 
  @Cuktisntfunny4 ай бұрын

  Chicken

• 
  @haparoundthehouse66182 ай бұрын

  true

• 
  @corydunaway4 ай бұрын

  Thanks for this. I got one today for $500 with a deck but no 81 inch belt. It still has the old sight glass fuel filter

• 
  @haparoundthehouse66184 ай бұрын

  nice-

• 
  @scottgalloway85874 ай бұрын

  Do you have much slope on the white pvc drain from the basket to the main drain? I had that drain full of gunk due to very little slope over 3 yrs.

• 
  @haparoundthehouse66184 ай бұрын

  not really much of a pitch-i dont use much soap and very little grease goes down the sink-i also make sure to rinse the sink with very hot water often, this can cut the gunk inside the tubing

• 
  @haparoundthehouse66182 ай бұрын

  thanks for watching

• 
  @colbywilliams61694 ай бұрын

  Wait till he finds a Sawzall 😂

• 
  @haparoundthehouse66182 ай бұрын

  true

• 
  @dumpsterfiremike89364 ай бұрын

  That aint 3k pounds

• 
  @haparoundthehouse66184 ай бұрын

  weighed at the gravel pit

• 
  @molambo4 ай бұрын

  Friend, you cover the bottle with aluminum, but when you use the nozzle, the glue left on it will dry.???

• 
  @haparoundthehouse66184 ай бұрын

  usually the nozzle screws right off-

• 
  @margaretjoyce32794 ай бұрын

  Advice: don’t take advice from a guy who doesn’t trim giant pieces of fat off his jerky, It shouldn’t be moist in the middle and the silver glaze is the fat starting to render.

• 
  @haparoundthehouse66184 ай бұрын

  l eat a higher fat diet than most-l do not trim the fat. thanks for watching

• 
  @themadmixer4 ай бұрын

  OMG!! Thank you so much for this info. I was about to start adding check valves and stuff because I suspected something was causing the bad smell. The vent valve in my case was behind the sheetrocked wall by the washing machine. I cut a hole to access the valve, took a picture, Googled the nametag, and your video popped up. God bless you, and a million thanks.🙏🙏🙏

• 
  @haparoundthehouse66184 ай бұрын

  glad it worked out-thanks for watching

• 
  @jimmy666035 ай бұрын

  I bought this jb marine weld a while ago. I've done various different experiments with it. I've used it on metals, plastics, china, glass, wood, and just about any other material you can think of. And my over all opinion of JB Marine weld is...,., Its worse than useless and its not worth the packaging it comes in! I even joined forums to find out if i was doing something wrong? Lots of people suggested mixing it thoroughly, then mixing it some more, then once youve finished mixing it, mix it twice more , then mix it a final three times. Doesn't make any difference whatsoever. It doesnt set in the 5 mins stated on the instructions. And It doesn't cure after 20 mins. In reality, it doesn't ever set or cure! No matter what i do with it, it only ever sets to the consistency of a silonce sealent. I used it to glue two warn out AA batteries together 5 weeks ago. And i can still peel it off with my finger nail to this day. No way in a million years will you ever be able to sand this useless crap. Dont waste your time and money.

• 
  @haparoundthehouse66185 ай бұрын

  sounds like it's too old-

• 
  @melissacummings89815 ай бұрын

  We just bought one at Goodwill. I can't wait to use mine to make this jerky!

• 
  @haparoundthehouse66185 ай бұрын

  They are really good-the learning curve isn't too bad-you will love the jerky

• 
  @bretdurisin65255 ай бұрын

  Hey buddy, not to be too critical, but you could not use this locktite under water. It is not going to be held.

• 
  @haparoundthehouse66182 ай бұрын

  of course

• 
  @rtbboatt68635 ай бұрын

  that's an easy out or pipe extractor

• 
  @haparoundthehouse66185 ай бұрын

  it's not an easy out-pipe extractor is vague term

• 
  @user-kt8yd6we4e5 ай бұрын

  Nice job. Difficult to see the steps, but soon I will be trying it myself. Big Camp 9 fan from always.

• 
  @haparoundthehouse66185 ай бұрын

  Nice rifle

• 
  @paulanix75615 ай бұрын

  Thank you! How do you store jerky?

• 
  @haparoundthehouse66185 ай бұрын

  Usually in a zip lock in the fridge

• 
  @tonhan20926 ай бұрын

  They are not quality anymore faulty parts and oil leaks research it

• 
  @haparoundthehouse66186 ай бұрын

  the oil comes from the food grade grease separating into base components--in many products quality is a thing of the past