Great video. Short and straight to the point. Thank you.
@haverelmink Жыл бұрын
This is a band-aid. The real answer is a complete overhaul of our criminal justice system, making such crimes punishable and enforced, not like what is happening with the current Democratic regime.
@robertdepesci34182 жыл бұрын
They're known to use 6 or 8 blades for one converter
@thulsa52182 жыл бұрын
Then they just cut further down the pipe taking out expensive y-pipes and O2 sensors in the process. If you really want to do it right have a cage built out of bent rebar surrounding the cat or those custom full length plates out there.
@johnsonbui2 жыл бұрын
Rebar and cage this weekend,weld machine just arrive this week,$3000 damaged my suv cannt just keep call my insurance
@thulsa52182 жыл бұрын
@@johnsonbui really sucks man. The amount of expense, time, and grief is enormous when this happens.
@achristian70152 жыл бұрын
I was thinking of brazing on some carbide rods. That will slow them down enough so that I can load up my gun.
@merrittmoore93672 жыл бұрын
Best idea I've seen so far, when a crook has to change blades, he will just leave and look for an easier target!
@thomasdingo51912 жыл бұрын
No real information.
@GadJitMan2 жыл бұрын
wow thanks for stating the obvious, I knew something was missing
@joedirt3449 Жыл бұрын
maybe the dingo ate your baby
@packratswhatif.39902 жыл бұрын
Ok yeah cool but couldn’t you also add an electrocution deterrent as a reminder for these dudes. I just want to hear them scream a little ….
@jaxon93242 жыл бұрын
Does the weld cover the whole pipe and the total length of the pipe if not I don’t see how this works. -thief “damn there is a weld I guess I’ll just cut 2 inches to the left”
@HiThisIsMine Жыл бұрын
What’s a better question is, why would you think that you even have to ask this? This obviously has to cover the length of the accessible pipe.. otherwise there is absolutely no deterrent. I’ve seen some ugly welds, but none of them are *that* scary.
@ICU-th7qj2 жыл бұрын
Torch would cut that. All you guys coming up with these ideas will just make them resort to other ways to get them off
@w46try72 жыл бұрын
Do you honestly believe a Tweaker is gonna learn how to use a torch, and take the trouble to light one up? Where using one will require face protection? And the spatter will not only burn himself, but cause a fire under the vehicle..where he’s laying? I just don’t think so.
@ICU-th7qj2 жыл бұрын
I cut the cats off my derby cars all the time with a torch. Not very hard. Also they make many sizes of torch tanks and you can get them the size of a small fire extinguisher. I know it's not ideal but can be done
@HiThisIsMine Жыл бұрын
The point the guy is making is that cat thieves are not going to be carrying around an oxy acetylene tank around so they can cut through a deterrent contraption. There’s hundreds of thousands of other cars on the road that they can just move onto and cut off in 30 seconds with their cordless sawzall. Eventually… one day.. _maybe_ you’ll see them resorting to a torch… maybe… but not anytime in the near future
@sl49839 ай бұрын
@@HiThisIsMineLol
@billdavis54832 жыл бұрын
It could delay theft a little. The presentation shows only a small length was applied so this needs to be applied over much more of pipe.
@jacksonvang34292 жыл бұрын
Where can i buy this stuff pls
@whoopdebefreekjesus3 жыл бұрын
Excellent example of your incompetency in at least making an informative video!
@bendude67482 жыл бұрын
Don’t see why you’re finding it so difficult to understand, I guess you just don’t have a clue about welding or cars in general.
@candidosantay61422 жыл бұрын
@bendude don’t worry about whoopdebefreekhesus he needs a girlfriend
@StinkySobaccos2 жыл бұрын
@@bendude6748 some of us actually don't (says a guy whose cat was stolen.)
@CHIBA280CRV3 жыл бұрын
Need to explain what weld material you used , not just show it and that’s it !!
@yourlocalalexis45782 жыл бұрын
exactly!!
@GadJitMan2 жыл бұрын
again anyone with half a brain knows they are not trying to reveal the SECRET in its entirety for obvious reasons. Also THEY want to provide service to make money like any company, so call for an appointment instead of complaining you are not being given an internet "FREEBIE".
@CHIBA280CRV2 жыл бұрын
@@GadJitMan ..No,problem tough guy !!
@sayitaintso75442 жыл бұрын
@@GadJitMan That was totally rude and nasty. You could have just as easily said 'theyre not revealing their secret so they can profit' but everything else you said was totally uncalled for. Commenting to tear others down doesnt make you look good.
@sl49839 ай бұрын
@@GadJitManthat makes sense
@johnr22973 жыл бұрын
What is that type of weld called?
@patmcbride98532 жыл бұрын
It's the type of rod, not the type of weld. It's called "hardface", and it is used to prevent wear on machinery like backhoe teeth and bulldozer blades.
@channelview88546 ай бұрын
It's pricey. That is one problem. If you want to buy, one I have used a lot in past is Stoody 21. Most industrial supply that sells welding supplies should have it or get you something similar.
@JimTMcDaniels13 жыл бұрын
That looks good! How much? Why not instead, bend and weld rebar along the exhaust pip and cat as rebar is harder to cut thru and dulls blades fast?
@garybulwinkle822 жыл бұрын
Wrong! Rebar is just mild steel and will cut easily. That "weld material" is called "hard facing" and is used by heavy equipment owners to coat their digging buckets and tip their digging teeth. They/we weld it on in big X patterns to slow the wear of the metal giving our equipment longer life spans. It is extremely hard and wears ten times as slow as mild steel. It is not very expensive, but we need a lot to do all the exposed surfaces of our equipment, and it's necessary in hard/abrasive soils!
@sl49839 ай бұрын
@@garybulwinkle82Do you recommend this for cat converters?
Пікірлер
Thank you sirs
How do we get this??
Great video. Short and straight to the point. Thank you.
This is a band-aid. The real answer is a complete overhaul of our criminal justice system, making such crimes punishable and enforced, not like what is happening with the current Democratic regime.
They're known to use 6 or 8 blades for one converter
Then they just cut further down the pipe taking out expensive y-pipes and O2 sensors in the process. If you really want to do it right have a cage built out of bent rebar surrounding the cat or those custom full length plates out there.
Rebar and cage this weekend,weld machine just arrive this week,$3000 damaged my suv cannt just keep call my insurance
@@johnsonbui really sucks man. The amount of expense, time, and grief is enormous when this happens.
I was thinking of brazing on some carbide rods. That will slow them down enough so that I can load up my gun.
Best idea I've seen so far, when a crook has to change blades, he will just leave and look for an easier target!
No real information.
wow thanks for stating the obvious, I knew something was missing
maybe the dingo ate your baby
Ok yeah cool but couldn’t you also add an electrocution deterrent as a reminder for these dudes. I just want to hear them scream a little ….
Does the weld cover the whole pipe and the total length of the pipe if not I don’t see how this works. -thief “damn there is a weld I guess I’ll just cut 2 inches to the left”
What’s a better question is, why would you think that you even have to ask this? This obviously has to cover the length of the accessible pipe.. otherwise there is absolutely no deterrent. I’ve seen some ugly welds, but none of them are *that* scary.
Torch would cut that. All you guys coming up with these ideas will just make them resort to other ways to get them off
Do you honestly believe a Tweaker is gonna learn how to use a torch, and take the trouble to light one up? Where using one will require face protection? And the spatter will not only burn himself, but cause a fire under the vehicle..where he’s laying? I just don’t think so.
I cut the cats off my derby cars all the time with a torch. Not very hard. Also they make many sizes of torch tanks and you can get them the size of a small fire extinguisher. I know it's not ideal but can be done
The point the guy is making is that cat thieves are not going to be carrying around an oxy acetylene tank around so they can cut through a deterrent contraption. There’s hundreds of thousands of other cars on the road that they can just move onto and cut off in 30 seconds with their cordless sawzall. Eventually… one day.. _maybe_ you’ll see them resorting to a torch… maybe… but not anytime in the near future
@@HiThisIsMineLol
It could delay theft a little. The presentation shows only a small length was applied so this needs to be applied over much more of pipe.
Where can i buy this stuff pls
Excellent example of your incompetency in at least making an informative video!
Don’t see why you’re finding it so difficult to understand, I guess you just don’t have a clue about welding or cars in general.
@bendude don’t worry about whoopdebefreekhesus he needs a girlfriend
@@bendude6748 some of us actually don't (says a guy whose cat was stolen.)
Need to explain what weld material you used , not just show it and that’s it !!
exactly!!
again anyone with half a brain knows they are not trying to reveal the SECRET in its entirety for obvious reasons. Also THEY want to provide service to make money like any company, so call for an appointment instead of complaining you are not being given an internet "FREEBIE".
@@GadJitMan ..No,problem tough guy !!
@@GadJitMan That was totally rude and nasty. You could have just as easily said 'theyre not revealing their secret so they can profit' but everything else you said was totally uncalled for. Commenting to tear others down doesnt make you look good.
@@GadJitManthat makes sense
What is that type of weld called?
It's the type of rod, not the type of weld. It's called "hardface", and it is used to prevent wear on machinery like backhoe teeth and bulldozer blades.
It's pricey. That is one problem. If you want to buy, one I have used a lot in past is Stoody 21. Most industrial supply that sells welding supplies should have it or get you something similar.
That looks good! How much? Why not instead, bend and weld rebar along the exhaust pip and cat as rebar is harder to cut thru and dulls blades fast?
Wrong! Rebar is just mild steel and will cut easily. That "weld material" is called "hard facing" and is used by heavy equipment owners to coat their digging buckets and tip their digging teeth. They/we weld it on in big X patterns to slow the wear of the metal giving our equipment longer life spans. It is extremely hard and wears ten times as slow as mild steel. It is not very expensive, but we need a lot to do all the exposed surfaces of our equipment, and it's necessary in hard/abrasive soils!
@@garybulwinkle82Do you recommend this for cat converters?
@@garybulwinkle82what should I use, regular 7018?