This channel is dedicated to having fun, riding anything with wheels, and working on stuff. You will find motorcycles, Atvs, dirt bikes, guns, cars, and tractors on this channel. Subscribe and enjoy. Thanks!
Thanks for the video. But Jesus Christ the camera work. I barely made it through it. Good thing you didn't shorted out fiddling with that test light and blow the fuse before we even got to see it😂
@Brandon-d9o14 күн бұрын
What a goose. Like we wanna watch ya fix your bike ya spastic
@EvanderPeyron15 күн бұрын
Is that a kick start does it work
@orisisseibert350715 күн бұрын
40a is good. Still no accessory
@timswan599518 күн бұрын
If the little twin cylinder was hitting on both cylinders I think it would work better!
@RonDoiron-pz3ee21 күн бұрын
$35. Dollar tool save all that headache.
@rodneywelsh8295Ай бұрын
Poor engine 😢😂
@nandog1024Ай бұрын
This motor engine very complicsted !!!! The first is wather pression !!!!???
@steverodriguez4871Ай бұрын
Do you know where I can get a replacement part for the airbag strut? There saying maybe me would cost 1200 for one I have 02 Escalade awd 6.0 the airbag strut all shot
@southpawsNfriendsАй бұрын
4 stroke btw folks.
@MaricelNucholsАй бұрын
I got 2009 Arctic cat 366, do you know if the cdi box for artic 600 or 650 will fit it. Thank you
@donaldadkins2203Ай бұрын
I would like to have your chart
@russelleavers201Ай бұрын
Russell
@russelleavers201Ай бұрын
Russell
@samuelhanekom9035Ай бұрын
Thank you. It worked like a bom. Absolutely wonderful. Thank you unbelievably much.
@chuckclark7444Ай бұрын
Originally thought it was my trailer wiring. They were getting worn and brittle. Had a neighbor plug his truck into my trailer and everything worked. So I knew it was my truck was the problem. Came upon your KZread video and that was it. 15 amp fuse. If it keeps blowing maybe my trailer wiring is a problem LOL. But you got me going in the right direction. Thank you
@MrCrrispy2 ай бұрын
Would be much better if you had sanded the upper yellowish layer first (especially the 1st one)... takes a couple of minutes. Also you should mask the surroundings of the headlight....
@butchortner65722 ай бұрын
Good job on your video.
@MrSfbsnyder2 ай бұрын
Yep, thanks again 12 yrs later lol. same fuse slot on a 17 sierra
@dude38612 ай бұрын
Video is 12 years old, try finding parts for it today.
@larrymichaud2353 ай бұрын
if you were to remove the 3 mud flap bolts on the bottom then it would easier to get at it.
@heribertobuenrostro11903 ай бұрын
Thank you answer my question i could find the fuse
@user-jr3ve3rx2n3 ай бұрын
2007 Chevy Tahoe, Blown fuse. Thanks for the post.
@bentowler32053 ай бұрын
Hey mate do you have any videos of you taking off the clutch side i need to replace the gear selector shaft but i dont know how so im looking for some directions before i just have a go
@Chris-hv4gm3 ай бұрын
You know what would have been nice if you would have said what colors each wire were so people can use the video such as me to put wires back
@marekkaminski89023 ай бұрын
I don't know if I have a problem with my KFX 700, because I have a dilemma with the carburetor or whether the revs are too high when it is in gear and moving slowly forward. Should I adjust the idle throttle lower? What do you think?
@tonylynn1913 ай бұрын
They went foot shift
@user-pc7fy6lc9d3 ай бұрын
Pleasee help, i did all of this yesterday and everything worked perfectly and great videos, but when i put the primary clutch on it rubs against the little rubber peace behind it
@chrispaulus44913 ай бұрын
Thank you for the help! In my case, every fuse tested as they should. However, the 15 amp fuse was physically the wrong size. Once we replaced it, the running lights worked! 😊
@howardkettner3 ай бұрын
Great of you to post the video, it would be even better if the price was stated.
@Proxy1043 ай бұрын
Please help me
@Michael-gu3tj4 ай бұрын
I need a 2006 350Es rancher display
@user-pw1td3no1l4 ай бұрын
Thank you much!
@gabrielcavenaghi14654 ай бұрын
Amigo no podés ser tan manco tenés que sacar el tensor de la cadena de distribución antes de sacar el piñón de la leva
@stratstrangler224 ай бұрын
I can’t figure out how to put this cover back on and which way to put the gears
@KarrieS.4 ай бұрын
This stuff works great. What a difference. Good stuff
@Justin-lh3rj5 ай бұрын
Ur carrier bearing might be bad, if so hope u got money for a new axle
@Justin-lh3rj5 ай бұрын
Mine is 99 love it I'm the second owner, my grandpa bought it from dealership as first owner. Mine is red not blue.
@Justin-lh3rj5 ай бұрын
Its called polaris sport 400L. No scrambler, scrambler is 4x4, sport isnt
@PwndersWoW5 ай бұрын
My bike can change gears, but it just slips so it rolls when trying to engage. Could it be sticky plates? It has standing still for almost a year...
@PwndersWoW5 ай бұрын
Awesome video! this will help me much
@willemdirkvanderspuy59615 ай бұрын
Thank you, awesome tip. It worked great!!!
@coyotesnper5 ай бұрын
It's a blending solvent, probably should have taped and mask the area around the headlights off. It softens clear coats and makes it easier to blend old clear to new " repainted". Great video I had no idea it would work on headlights. So how long did it last on them?
@BigjermsGarage4 ай бұрын
It’s been 7 months, still look good
@thejimbo13115 ай бұрын
1998 Polaris sport 400L..!! I have owned one since 1998. Have opened 2 different ones!!
@DavidMoyers5 ай бұрын
@bigjermsgarage I have the same petcock and kit. Question: the top fuel line tap (right angle) was loose but not leaking. It appears to have a shallow concave ring in the part that goes down in the valve. O-ring maybe? If not, maybe a little JB weld or the like? Thanks
@GeboNC5 ай бұрын
Arent you supposed tk make sure the “x” on both clutches line up before u put the belt on and how the f can someone make them line up when u put it on?
@GeboNC5 ай бұрын
What year scrambler is this? Everyone says on a 98-2002 scrambler u can get belt on and off with one finger! I have a 99 500 w/o EBS and it was a bitch to get off. And a major bitch to get the new one on! Why do some ppls videos show them literally slip it right over primary and over secondary just as easy but this video dude has to walk it around by turning secondary to force it around and onto it? Also ppls videos show them separate secondary shieves by hand like nothin- mine cant be separated by hand!
@doityourselfer20005 ай бұрын
Thanks for the video! Just found my problem was the cooked stator wires coming out of the engine cover!
@rickyarp2535 ай бұрын
All three.. a man can't have enough toys
@andrewmccaskill28455 ай бұрын
Exactly what I needed
@JayPalmquist6 ай бұрын
Anyone have any clue how to get The battery out to change it??!
Пікірлер
Thanks for the video. But Jesus Christ the camera work. I barely made it through it. Good thing you didn't shorted out fiddling with that test light and blow the fuse before we even got to see it😂
What a goose. Like we wanna watch ya fix your bike ya spastic
Is that a kick start does it work
40a is good. Still no accessory
If the little twin cylinder was hitting on both cylinders I think it would work better!
$35. Dollar tool save all that headache.
Poor engine 😢😂
This motor engine very complicsted !!!! The first is wather pression !!!!???
Do you know where I can get a replacement part for the airbag strut? There saying maybe me would cost 1200 for one I have 02 Escalade awd 6.0 the airbag strut all shot
4 stroke btw folks.
I got 2009 Arctic cat 366, do you know if the cdi box for artic 600 or 650 will fit it. Thank you
I would like to have your chart
Russell
Russell
Thank you. It worked like a bom. Absolutely wonderful. Thank you unbelievably much.
Originally thought it was my trailer wiring. They were getting worn and brittle. Had a neighbor plug his truck into my trailer and everything worked. So I knew it was my truck was the problem. Came upon your KZread video and that was it. 15 amp fuse. If it keeps blowing maybe my trailer wiring is a problem LOL. But you got me going in the right direction. Thank you
Would be much better if you had sanded the upper yellowish layer first (especially the 1st one)... takes a couple of minutes. Also you should mask the surroundings of the headlight....
Good job on your video.
Yep, thanks again 12 yrs later lol. same fuse slot on a 17 sierra
Video is 12 years old, try finding parts for it today.
if you were to remove the 3 mud flap bolts on the bottom then it would easier to get at it.
Thank you answer my question i could find the fuse
2007 Chevy Tahoe, Blown fuse. Thanks for the post.
Hey mate do you have any videos of you taking off the clutch side i need to replace the gear selector shaft but i dont know how so im looking for some directions before i just have a go
You know what would have been nice if you would have said what colors each wire were so people can use the video such as me to put wires back
I don't know if I have a problem with my KFX 700, because I have a dilemma with the carburetor or whether the revs are too high when it is in gear and moving slowly forward. Should I adjust the idle throttle lower? What do you think?
They went foot shift
Pleasee help, i did all of this yesterday and everything worked perfectly and great videos, but when i put the primary clutch on it rubs against the little rubber peace behind it
Thank you for the help! In my case, every fuse tested as they should. However, the 15 amp fuse was physically the wrong size. Once we replaced it, the running lights worked! 😊
Great of you to post the video, it would be even better if the price was stated.
Please help me
I need a 2006 350Es rancher display
Thank you much!
Amigo no podés ser tan manco tenés que sacar el tensor de la cadena de distribución antes de sacar el piñón de la leva
I can’t figure out how to put this cover back on and which way to put the gears
This stuff works great. What a difference. Good stuff
Ur carrier bearing might be bad, if so hope u got money for a new axle
Mine is 99 love it I'm the second owner, my grandpa bought it from dealership as first owner. Mine is red not blue.
Its called polaris sport 400L. No scrambler, scrambler is 4x4, sport isnt
My bike can change gears, but it just slips so it rolls when trying to engage. Could it be sticky plates? It has standing still for almost a year...
Awesome video! this will help me much
Thank you, awesome tip. It worked great!!!
It's a blending solvent, probably should have taped and mask the area around the headlights off. It softens clear coats and makes it easier to blend old clear to new " repainted". Great video I had no idea it would work on headlights. So how long did it last on them?
It’s been 7 months, still look good
1998 Polaris sport 400L..!! I have owned one since 1998. Have opened 2 different ones!!
@bigjermsgarage I have the same petcock and kit. Question: the top fuel line tap (right angle) was loose but not leaking. It appears to have a shallow concave ring in the part that goes down in the valve. O-ring maybe? If not, maybe a little JB weld or the like? Thanks
Arent you supposed tk make sure the “x” on both clutches line up before u put the belt on and how the f can someone make them line up when u put it on?
What year scrambler is this? Everyone says on a 98-2002 scrambler u can get belt on and off with one finger! I have a 99 500 w/o EBS and it was a bitch to get off. And a major bitch to get the new one on! Why do some ppls videos show them literally slip it right over primary and over secondary just as easy but this video dude has to walk it around by turning secondary to force it around and onto it? Also ppls videos show them separate secondary shieves by hand like nothin- mine cant be separated by hand!
Thanks for the video! Just found my problem was the cooked stator wires coming out of the engine cover!
All three.. a man can't have enough toys
Exactly what I needed
Anyone have any clue how to get The battery out to change it??!