That’s honestly wild DEWALT has some power💪and I’m a Milwaukee guy and that only a 12 volt system I wonder what the 20 volt systems would do and without the compact version!!
@Wrench_and_Weld11 күн бұрын
I couldn’t imagine
@Wrench_and_Weld11 күн бұрын
Disclaimer I like Milwaukee too just shocked such a small impact can take of untouched lugnuts
@coryluscombe123913 күн бұрын
Don't make em like that no more. Respect
@Wrench_and_Weld13 күн бұрын
No they do not just got this one for free some guy painted it orange tho🤦 but I cleaned the points and carb a new spark wire new plug new gas’s started right up then sharpened the blades and put it right to work
@ErnestWolfe-bz1kk13 күн бұрын
My grandpa had one mow his yard every week built like a tank
@Wrench_and_Weld13 күн бұрын
Until they overheat… lol
@KoolDudeismeАй бұрын
🗣🗣🔥🔥🔥
@KoolDudeismeАй бұрын
Reall
@user-ge4qy8hc2nАй бұрын
Aika ruma mulla on hienompi 110cc😂😂
@Dillon_does_stuff2 ай бұрын
I would imagine you would have to tune the carb a little for a better mixture and your valves will probably croad
@Dillon_does_stuff2 ай бұрын
Your the WD of quads 🤣
@Dillon_does_stuff2 ай бұрын
Hell ya 😂
@Dillon_does_stuff2 ай бұрын
OOF DAMN DUDE THATS A HELL OF A JOB TO FIX
@Dillon_does_stuff2 ай бұрын
Stick some wood in front of the tire
@Dillon_does_stuff2 ай бұрын
Called good engineers
@Wrench_and_Weld2 ай бұрын
Good thing I went in there and sealed it all👍
@Dillon_does_stuff2 ай бұрын
@@Wrench_and_Weld yep 😂
@Dillon_does_stuff2 ай бұрын
Fr
@tomwilkinson21842 ай бұрын
Hi , thank you for sharing your experience. I'm interested in servicing my old wheel horse transmission, and replacing the axle seal , have you done it? Thanks Tom
@19patrickm913 ай бұрын
What's the name of that songs?
@randomrandle71443 ай бұрын
Pretty Little Devil - Shaya Zamora
@jemiinimusic5 ай бұрын
Did you by chance see smoke coming from the exhaust after the starter replacement? Just replaced mine and the starter that came in seemed just a hair bigger than the old one. Cut it on with no problem at all but see smoke from the exhaust and it smells like something is burning. 😬 Scared to turn it back on. Is there a chance the starter was too big? Should I have oiled it first. Newb here. Appreciate your video and feedback ✌️
@Wrench_and_Weld5 ай бұрын
I did not see smoke mine burns oil so there is always smoke but if you smell burning yeah check the size or try taking it out oil it up try again also check connection Sometimes mine smells like burning but that’s because of the wiring on mine is all messed up from water
@alexanderpopik67806 ай бұрын
Wtf kinda gas u use. So dirty in there
@Wrench_and_Weld5 ай бұрын
Water
@Wrench_and_Weld5 ай бұрын
It’s a pressure washer it sits outside and it’s been sitting for some time now
@clintonallen88136 ай бұрын
And let me guess now it don't run because you burn all the valves up
@alexanderpopik67806 ай бұрын
😂😂
@Wrench_and_Weld6 ай бұрын
Nope runs just fine
@Wrench_and_Weld6 ай бұрын
What’s so funny it runs just fine
@broken95zj6 ай бұрын
I don’t think you used enough break cleaner!
@Wrench_and_Weld6 ай бұрын
I didn’t buy it
@broken95zj6 ай бұрын
Do you eat crayons?
@Wrench_and_Weld6 ай бұрын
Yes
@EthanFriess6 ай бұрын
Mine sputtering and backfireding, help?
@Wrench_and_Weld6 ай бұрын
I just got another one for my sister it’s doing the same thing check your grounds there’s a black box that goes bad all the time by the back left tire and your carburetor it could need a cleaning or tuning I would just go buy a new one for like 50 bucks and retune it as you ride it
@darianthompson59756 ай бұрын
It's all viscosity and additives. Throw some lucas in it and guess with everyone else
@jordanmorris8957 ай бұрын
It shouldn’t sound like that when you rev have you ever looked at the top end of your engine thinks toast by now
@Wrench_and_Weld7 ай бұрын
Oh yeah bud it’s blown burns oil like a old ford but still runs so still is getting beat on😭 need it to blow so I can get a big bore for it
@jordanmorris8957 ай бұрын
@@Wrench_and_Weld hope the top goes i got an ltz400 ona stock bottom with a newer stock head if im going out I’m going out the bottom lol
@Wrench_and_Weld7 ай бұрын
@jordanmorris895 I want a ltz 400 just to much money so my ltz 250 it just going to need to get a big boor kit but it won’t blow up I tryed
@Wrench_and_Weld7 ай бұрын
It runs i promise😅 I forgot to video it because it got dark and it was raining😅
@josephdalonges87187 ай бұрын
You do know there’s no such thing as a still “5251”?
@Wrench_and_Weld7 ай бұрын
Ik it is a ms251 And you know it’s a Stihl not still
@Wrench_and_Weld7 ай бұрын
I forgot it said s not 5 when I was labeling the video my b
@broken95zj8 ай бұрын
You gonna blow that thing up before it’s even on the road
@dchaparro238 ай бұрын
Sounds aggressively right :)
@malakitaylor90578 ай бұрын
U acting like it’s a cheap brand!!!
@Wrench_and_Weld8 ай бұрын
lol Ik it’s free I need to get a new bar for it the guy who had it before me had no experience with saws the chain was on backwards and the bar is bent and it had a like 85 oil 15 gass mix in there
@switzerland88359 ай бұрын
Fendt>All
@Wrench_and_Weld9 ай бұрын
Case>all
@StaticSift9 ай бұрын
my stihl does.. bulbs only needed for priming.
@Wrench_and_Weld9 ай бұрын
No I’m not disagreeing with you but I had 5 other wackers and they would not run I put a new bulb on them and they ran fine
@bigdpropertyservices8549 ай бұрын
You don’t show the bottom of the carb where the bowl is that’s a broom bulb only needed for priming
@Wrench_and_Weld9 ай бұрын
No if you look at a carb on a Weedwhacker is not like a lawnmower one it is flat at the bottom. Look up Weedwhacker carb it is completely different.
@ernieshepherd74319 ай бұрын
Promo*SM
@dirtpounder9 ай бұрын
Every day bud!
@Derek_7210 ай бұрын
Roadkill used zip ties for the engine mount. Nice😊
@Tennesseemountainhomestead10 ай бұрын
That’s pretty cool, looks like fun. Sounds good. You got a nice place to ride!
@Wrench_and_Weld10 ай бұрын
One of my worst spots lol but it was closest and I needed to test it lol I just did a new exhaust system on it
@theronrose175510 ай бұрын
i had one of these a while back and rolled it😂
@Wrench_and_Weld10 ай бұрын
This one has seen it all from jumps to rollovers to water in the engine to trees and limiter anything you can think of this has seen it
@Tennesseemountainhomestead10 ай бұрын
That’s amazing. It can pull willies with a little 212. Do you have a foot throttle on that now with the new motor?
@Wrench_and_Weld10 ай бұрын
This 212 is impressive i ran it with not filter for years and had no oil low oil water oil and gass oil in it and it loved it and not I used my choke cable at the throttle and there is no governor delete
@Wrench_and_Weld10 ай бұрын
I don’t like foot throttle
@Tennesseemountainhomestead10 ай бұрын
@@Wrench_and_Weld dang that is impressive
@P1pC011 ай бұрын
What’s that
@rajeensuriyawansa99911 ай бұрын
Nice work .Good to see Simple engineering . I would appreciate if you can post your experience about comfortability after the modification is done.
@Wrench_and_Weld11 ай бұрын
That car is done for I got stuck in a puddle and blew the motor well it cracked the block but it worked and drove fine for years it works very good and it comfy
@davidnorth341111 ай бұрын
Healthy and ready for the open road
@Wrench_and_Weld11 ай бұрын
Not at all close 😅 needs a cab bad and rear axle🫣
@Wrench_and_Weld Жыл бұрын
Sorry for no background music KZread complains about a lot😅
@tuttlegxp5191 Жыл бұрын
Jesus...
@Wrench_and_Weld Жыл бұрын
Wish I had a cab and rear axle for it 😅
@nelsoncandelariacarvalhovi96022 жыл бұрын
Sarava
@STAY-GOLD-VINYL2 жыл бұрын
What size are your diy spacers? 3 inches ? Are they just nuts that you slide the grade 8 bolts thru?? What size bolts?
@Wrench_and_Weld Жыл бұрын
4 inch and they are spacers from yours part store so kinda like washers and stock bolts
@jessicapattypereiraesquel35272 жыл бұрын
Tenho uma kia 1998 gasolina 2.0 mas não acho cambio para comprar
@boymugnaadventure29673 жыл бұрын
new subscriber here
@Wrench_and_Weld3 жыл бұрын
Ayy
@MELEGO3513 жыл бұрын
Good to see what happened to it. It is a pity the ECU is mounted low down.
@Wrench_and_Weld3 жыл бұрын
Yeah it is why would that make a 4x4 car and buy the computer down so low
Пікірлер
Mule for life
Huh
That’s honestly wild DEWALT has some power💪and I’m a Milwaukee guy and that only a 12 volt system I wonder what the 20 volt systems would do and without the compact version!!
I couldn’t imagine
Disclaimer I like Milwaukee too just shocked such a small impact can take of untouched lugnuts
Don't make em like that no more. Respect
No they do not just got this one for free some guy painted it orange tho🤦 but I cleaned the points and carb a new spark wire new plug new gas’s started right up then sharpened the blades and put it right to work
My grandpa had one mow his yard every week built like a tank
Until they overheat… lol
🗣🗣🔥🔥🔥
Reall
Aika ruma mulla on hienompi 110cc😂😂
I would imagine you would have to tune the carb a little for a better mixture and your valves will probably croad
Your the WD of quads 🤣
Hell ya 😂
OOF DAMN DUDE THATS A HELL OF A JOB TO FIX
Stick some wood in front of the tire
Called good engineers
Good thing I went in there and sealed it all👍
@@Wrench_and_Weld yep 😂
Fr
Hi , thank you for sharing your experience. I'm interested in servicing my old wheel horse transmission, and replacing the axle seal , have you done it? Thanks Tom
What's the name of that songs?
Pretty Little Devil - Shaya Zamora
Did you by chance see smoke coming from the exhaust after the starter replacement? Just replaced mine and the starter that came in seemed just a hair bigger than the old one. Cut it on with no problem at all but see smoke from the exhaust and it smells like something is burning. 😬 Scared to turn it back on. Is there a chance the starter was too big? Should I have oiled it first. Newb here. Appreciate your video and feedback ✌️
I did not see smoke mine burns oil so there is always smoke but if you smell burning yeah check the size or try taking it out oil it up try again also check connection Sometimes mine smells like burning but that’s because of the wiring on mine is all messed up from water
Wtf kinda gas u use. So dirty in there
Water
It’s a pressure washer it sits outside and it’s been sitting for some time now
And let me guess now it don't run because you burn all the valves up
😂😂
Nope runs just fine
What’s so funny it runs just fine
I don’t think you used enough break cleaner!
I didn’t buy it
Do you eat crayons?
Yes
Mine sputtering and backfireding, help?
I just got another one for my sister it’s doing the same thing check your grounds there’s a black box that goes bad all the time by the back left tire and your carburetor it could need a cleaning or tuning I would just go buy a new one for like 50 bucks and retune it as you ride it
It's all viscosity and additives. Throw some lucas in it and guess with everyone else
It shouldn’t sound like that when you rev have you ever looked at the top end of your engine thinks toast by now
Oh yeah bud it’s blown burns oil like a old ford but still runs so still is getting beat on😭 need it to blow so I can get a big bore for it
@@Wrench_and_Weld hope the top goes i got an ltz400 ona stock bottom with a newer stock head if im going out I’m going out the bottom lol
@jordanmorris895 I want a ltz 400 just to much money so my ltz 250 it just going to need to get a big boor kit but it won’t blow up I tryed
It runs i promise😅 I forgot to video it because it got dark and it was raining😅
You do know there’s no such thing as a still “5251”?
Ik it is a ms251 And you know it’s a Stihl not still
I forgot it said s not 5 when I was labeling the video my b
You gonna blow that thing up before it’s even on the road
Sounds aggressively right :)
U acting like it’s a cheap brand!!!
lol Ik it’s free I need to get a new bar for it the guy who had it before me had no experience with saws the chain was on backwards and the bar is bent and it had a like 85 oil 15 gass mix in there
Fendt>All
Case>all
my stihl does.. bulbs only needed for priming.
No I’m not disagreeing with you but I had 5 other wackers and they would not run I put a new bulb on them and they ran fine
You don’t show the bottom of the carb where the bowl is that’s a broom bulb only needed for priming
No if you look at a carb on a Weedwhacker is not like a lawnmower one it is flat at the bottom. Look up Weedwhacker carb it is completely different.
Promo*SM
Every day bud!
Roadkill used zip ties for the engine mount. Nice😊
That’s pretty cool, looks like fun. Sounds good. You got a nice place to ride!
One of my worst spots lol but it was closest and I needed to test it lol I just did a new exhaust system on it
i had one of these a while back and rolled it😂
This one has seen it all from jumps to rollovers to water in the engine to trees and limiter anything you can think of this has seen it
That’s amazing. It can pull willies with a little 212. Do you have a foot throttle on that now with the new motor?
This 212 is impressive i ran it with not filter for years and had no oil low oil water oil and gass oil in it and it loved it and not I used my choke cable at the throttle and there is no governor delete
I don’t like foot throttle
@@Wrench_and_Weld dang that is impressive
What’s that
Nice work .Good to see Simple engineering . I would appreciate if you can post your experience about comfortability after the modification is done.
That car is done for I got stuck in a puddle and blew the motor well it cracked the block but it worked and drove fine for years it works very good and it comfy
Healthy and ready for the open road
Not at all close 😅 needs a cab bad and rear axle🫣
Sorry for no background music KZread complains about a lot😅
Jesus...
Wish I had a cab and rear axle for it 😅
Sarava
What size are your diy spacers? 3 inches ? Are they just nuts that you slide the grade 8 bolts thru?? What size bolts?
4 inch and they are spacers from yours part store so kinda like washers and stock bolts
Tenho uma kia 1998 gasolina 2.0 mas não acho cambio para comprar
new subscriber here
Ayy
Good to see what happened to it. It is a pity the ECU is mounted low down.
Yeah it is why would that make a 4x4 car and buy the computer down so low
Put
Found it