Jeep 411 is now TRAILS 411 covering a wide range of adventures, driving tips, vehicle, suspension, tires, winching, vehicle recovery, overlanding, trail access issues, rig builds vehicle test and product tests.
@backcountrydriver ah ok gotcha. Its was very nice. I'm considering getting one
@jeeprubicon665027 күн бұрын
So basically this video was ruined by basically a very basic mistake most creators do. Basically it’s about repetition, so basically, yeah.
@thomaspoucher4089Ай бұрын
60k on mine. Rotated once. Perfect wear. Amazing off-road. Probably another 10k left on them
@seanwhiting1Ай бұрын
can you mount a 37x12.5x20 on a ranger DST 2420, or do need a special balancer for larger tires?
@EliG-ry8rg2 ай бұрын
music is killing me ican't watch because of music.
@fredblase56082 ай бұрын
50+ years ago I had a retread 14" tire on a bubble balance machine, it would have taken 2 pounds of weight on one side to get it into static balance! One could look at it and see it was way out of round. We turned the tire in for warranty.
@max889912 ай бұрын
Does it connect to the car battery? I’m just curious how it gets its power. Does it have its own battery?
@backcountrydriver2 ай бұрын
All electric winches connect to the car battery
@mdbelden3 ай бұрын
I noticed he mentioned different weights. I'm buying front and rear for my JLUR, but it's a diesal. Do they make one specifically for the diesal?
@backcountrydriver3 ай бұрын
yes
@mackjacobs54893 ай бұрын
How are the sidewalls holding up?
@Coolhansolo3 ай бұрын
Thanks good info.
@Roblet2173 ай бұрын
Did the jeep in this video have the anti-spin diff rear axle in it?
@backcountrydriver3 ай бұрын
No. totally stock JL Sport S with a Dana 30 and Dana 35. No limited slip or lockers and poor tires.
@Roblet2173 ай бұрын
@@backcountrydriverOh ok, that is exactly what my 2021 jeep has. The JL dana 35 is the advantek axle I believe. Do you think it would be strong enough for some rugged 33's? I think 33's will fit without a lift. I wasn't planning on going too wide with the tire. 265/275 ish. Thanks! 🙂
@backcountrydriver3 ай бұрын
33"s should be OK as long as you avoi wheel spin where the tires can suddenly grab traction and possibly break an axle. Be smooth on the throttle and it should work well.@@Roblet217
@dadams14373 ай бұрын
Wish there was a smaller form factor key for the Jeep.
@ykdavid3 ай бұрын
If the numbers are too high you can dismount the tire and move it 180 degrees from where it was. BTW Static is fine but not having a cover thor that machine is kinda dangerous!
@aaronhoward14513 ай бұрын
This is exactly what I was looking for. Apex DOWN, Powertank UP.
@backcountrydriver3 ай бұрын
It's a great setup!
@ChasingDreamsLivingLife4 ай бұрын
where is the video of you hooking all this up?
@GusMahn4 ай бұрын
I just balanced a set of 15”x10” used Jeep wheels with 35’s for a friend. On Dynamic it was asking for 26oz on the outside and 10oz on the inside directly opposite from the outside weight. It repeated on a second balancer. Static was 6oz on the centerline. No way I’m putting 2lb+ of weight on a wheel.
@satanias5 ай бұрын
And what about the installation with camera trail?
@Thestorytilldate2 ай бұрын
Same question. I think it wont work. The only way is to get locking hood latches.
@mikekosar61356 ай бұрын
Bump steer is another…. I like the idea of the steering box
@dustykidphoto6 ай бұрын
thats really crazy.... adjusting the shock with wrench on the trail.... good job Bilstein....
@garymccomas97136 ай бұрын
Yukon has the worst customer service. Sent wrong installation kit. They did not have a care in the world to get the correct installation kit mailed out. Jeep in shop torn apart.
@garymccomas97136 ай бұрын
Yoking
@solarforfuture7 ай бұрын
send some over to me for testing... thanks
@twohandsandaradio7 ай бұрын
Now if you can lower the volume or do away with the annoying filler music it would be watchable. Thanks.
@Icutmetal7 ай бұрын
Show us how it's done. Thanks.
@951media7 ай бұрын
Is the rear bumper bent on the left side?
@toriwilliamson47879 ай бұрын
Best day ever! Great experience. By the way, husband, Rus, is in the back seat lol. My sister is riding shotgun lol. This was her first time ever experiencing an off-road adventure and wow she got one heck of a dose!
@toriwilliamson47879 ай бұрын
This was such an amazing day! I can’t say enough good about my experience with Trails 411. Wonderful team of people and got through all those rock gardens with no damage at all to Lorelai! It was a great day. I All 3 badges arrived before I even got home, including a 4th one I earned in Arizona. Best 3 week vacation ever. Thanks again Trails 411 for the awesome guide through the Big Bear Honor Badge Trails.
@LexusGX460-OFF-ROAD9 ай бұрын
got up the first waterfall in a stock height Lexus GX460 without a spotter... it was absolutely hilarious... definitely need a spotter on this trail... great job ❤
@quintanakoiponds9 ай бұрын
What was the hardest of the 3 ? I’m guessing it’s Holcomb.. I been to the beginning of this one and went in 100 yards and turned around I had no one with me and wasn’t familiar with the trail so we did gold mountain half way and turned around again I was alone wasn’t familiar with the trail I have 4 inch lift 35s , jk
@backcountrydriver9 ай бұрын
You are correct. The middle rock garden is always wet and that makes it challenging.
@toriwilliamson47879 ай бұрын
I highly advise not doing these trails without experienced spotters. Your JK on a 4” lift with 35s is the same as my JL on a 2” lift on 35s. I don’t have lockers either. That made it even more challenging. Contact Don Alexander. You will not regret having them lead you through the mountains.
@JeepingMo9 ай бұрын
Good video. Cannot wait to get back out there
@gr8pony7279 ай бұрын
Would love to See it On the Jeep wheeling and see how it holds up.
@backcountrydriver9 ай бұрын
soon
@collinc76329 ай бұрын
Take a shot every time he says the word "basically"and you'll be drunk by the three minute mark. I counted 36 "basically"'s in the whole video which is about 2.5 "basically"'s per minute 😂
@theoverlanddisciple9 ай бұрын
So does this mean that if you run a front antirock, but not or nothing in the rear, it's semi pointless?
@backcountrydriver9 ай бұрын
You can run a front Antirock with the stock rear bar but the front to rear balance is not ideal.
@KINGRG110 ай бұрын
In my experience anything 33” or larger should be balanced in static mode. I always hear people saying “you should really Road Force balance it” but the majority of those people are clueless on how tire balancing works. Road Force machines can’t properly match large (33”+) tires just because the machine doesn’t have that capability in that mode. It doesn’t matter if you have a 4th generation or even a newer 5th generation Road Force machine, either. The other thing people don’t realize when they complain about having a tire static balanced vs dynamically is that a large tire that has been static balanced will probably never go faster than 90 mph which most M/T’s are rated for 100mph. Drag racers and road racers alike use static balancing for high speed driving. IF you choose to balance your large tires dynamically then it would be best practice to balance your tires every 20,000 miles.
@lazarosanchez832211 ай бұрын
Damm the dealer is replacing the whole axle and sensor, just got word today. 31k miles eco diesel gladiator
@Steve-od6hi11 ай бұрын
Really? Basically? LOL wish I has 5 bucks for each one.
@johnesweeney2311 ай бұрын
So question...Does the tie rod rub against the brake rotor at all at full turn? Because I have a 2014 JK and installed this tie rod, cut away a piece of the brake dust shield, and the tie rod still rubs my rotors at full turn. I have a good little groove dug into both of my rotors because of it.
That tire is BAD ... I can see its lumpy as it spins.
@jamesmoore1124 Жыл бұрын
This video is older but you’re why I went with Nexen mxt m/t. Your experience is what I listen to being new to off-roading. I want to learn how to correctly. Thank you for sharing your knowledge.
@backcountrydriver Жыл бұрын
Thank you for the positive comment!
@mustang7288 Жыл бұрын
I just ordered mine
@Brsrafal Жыл бұрын
My dealer put 51 psi in my rav4 tires say 51psi max load on the tire. Yet door says 35psi this is odd why they do that? Should I lower it to 35psi btw they used nitrogen
@backcountrydriver Жыл бұрын
Auto manufacturers suggest high tire pressures to improve the corporate fuel economy numbers. Over-inflated tires accelerate wear and reduce traction. The only accurate way to determine optimum tire pressures for the highway/street is to do a chalk te4st. Search for videos on the tire chalk test on KZread or Google.
@paranormalwheelers Жыл бұрын
sweet.
@joelmendoza3428 Жыл бұрын
Quick question, would a static balance work good as a dinámic balance?
@backcountrydriver Жыл бұрын
No! Dynamic balancing improves lateral balance in addition to vertical (bouncing) balance. This reduces the chance of death wobble (but does not eliminate the chance of death wobble).
@ACommenterOnYouTube Жыл бұрын
i static balance all my tires and NONE give me any vibrations
@SKANK_HUNT49 Жыл бұрын
Yes its fine
@ACommenterOnYouTube Жыл бұрын
@@SKANK_HUNT49 ok
@woof3598 Жыл бұрын
on front lower control arms , does it matter if the Johny joints are on the front of the arms or the rear .?
@backcountrydriver Жыл бұрын
Thanks for your question. The Johnny Joint should attach at the frame, not the axle.
@danstubbs5032 Жыл бұрын
Just got mine yesterday. Going to test the crap out of them Sunday. 😁
@backcountrydriver Жыл бұрын
Good luck and have fun. They seem to work well for us.
@tylamb2437 Жыл бұрын
Thank you for making this video. Super easy. Great job!
@backcountrydriver Жыл бұрын
Glad it was helpful!
@randomstuff3672 Жыл бұрын
Couldn't happen to a nicer guy. Seriously, I've only wheeled with Don once but he is about the nicest guy you can meet. That is a crazy break. (They both were.) Glad you guys were able to get home safely.
@backcountrydriver Жыл бұрын
Thanks for the well wishes. The fact that these two breaks happened ten feet from each other made our heads swim.
@eddie1382011 Жыл бұрын
What are the chances of this situation happening? Insane!
@user-cj7dv2kc6d Жыл бұрын
Gag me with your soundtrack even before I hear a word.
@backcountrydriver Жыл бұрын
Thanks for the feedback. Have yo listened to any of the neer versions and what is your opinion? Music is such a personal choice and I would like to have sound tracks that are not offensive, somewhat enjoyable and really nothing that stands out. Appriciate yor feedback. Thanks.
Пікірлер
Do you still own this xterra?
No. It was a great rig. Sold it in 2012.
@backcountrydriver ah ok gotcha. Its was very nice. I'm considering getting one
So basically this video was ruined by basically a very basic mistake most creators do. Basically it’s about repetition, so basically, yeah.
60k on mine. Rotated once. Perfect wear. Amazing off-road. Probably another 10k left on them
can you mount a 37x12.5x20 on a ranger DST 2420, or do need a special balancer for larger tires?
music is killing me ican't watch because of music.
50+ years ago I had a retread 14" tire on a bubble balance machine, it would have taken 2 pounds of weight on one side to get it into static balance! One could look at it and see it was way out of round. We turned the tire in for warranty.
Does it connect to the car battery? I’m just curious how it gets its power. Does it have its own battery?
All electric winches connect to the car battery
I noticed he mentioned different weights. I'm buying front and rear for my JLUR, but it's a diesal. Do they make one specifically for the diesal?
yes
How are the sidewalls holding up?
Thanks good info.
Did the jeep in this video have the anti-spin diff rear axle in it?
No. totally stock JL Sport S with a Dana 30 and Dana 35. No limited slip or lockers and poor tires.
@@backcountrydriverOh ok, that is exactly what my 2021 jeep has. The JL dana 35 is the advantek axle I believe. Do you think it would be strong enough for some rugged 33's? I think 33's will fit without a lift. I wasn't planning on going too wide with the tire. 265/275 ish. Thanks! 🙂
33"s should be OK as long as you avoi wheel spin where the tires can suddenly grab traction and possibly break an axle. Be smooth on the throttle and it should work well.@@Roblet217
Wish there was a smaller form factor key for the Jeep.
If the numbers are too high you can dismount the tire and move it 180 degrees from where it was. BTW Static is fine but not having a cover thor that machine is kinda dangerous!
This is exactly what I was looking for. Apex DOWN, Powertank UP.
It's a great setup!
where is the video of you hooking all this up?
I just balanced a set of 15”x10” used Jeep wheels with 35’s for a friend. On Dynamic it was asking for 26oz on the outside and 10oz on the inside directly opposite from the outside weight. It repeated on a second balancer. Static was 6oz on the centerline. No way I’m putting 2lb+ of weight on a wheel.
And what about the installation with camera trail?
Same question. I think it wont work. The only way is to get locking hood latches.
Bump steer is another…. I like the idea of the steering box
thats really crazy.... adjusting the shock with wrench on the trail.... good job Bilstein....
Yukon has the worst customer service. Sent wrong installation kit. They did not have a care in the world to get the correct installation kit mailed out. Jeep in shop torn apart.
Yoking
send some over to me for testing... thanks
Now if you can lower the volume or do away with the annoying filler music it would be watchable. Thanks.
Show us how it's done. Thanks.
Is the rear bumper bent on the left side?
Best day ever! Great experience. By the way, husband, Rus, is in the back seat lol. My sister is riding shotgun lol. This was her first time ever experiencing an off-road adventure and wow she got one heck of a dose!
This was such an amazing day! I can’t say enough good about my experience with Trails 411. Wonderful team of people and got through all those rock gardens with no damage at all to Lorelai! It was a great day. I All 3 badges arrived before I even got home, including a 4th one I earned in Arizona. Best 3 week vacation ever. Thanks again Trails 411 for the awesome guide through the Big Bear Honor Badge Trails.
got up the first waterfall in a stock height Lexus GX460 without a spotter... it was absolutely hilarious... definitely need a spotter on this trail... great job ❤
What was the hardest of the 3 ? I’m guessing it’s Holcomb.. I been to the beginning of this one and went in 100 yards and turned around I had no one with me and wasn’t familiar with the trail so we did gold mountain half way and turned around again I was alone wasn’t familiar with the trail I have 4 inch lift 35s , jk
You are correct. The middle rock garden is always wet and that makes it challenging.
I highly advise not doing these trails without experienced spotters. Your JK on a 4” lift with 35s is the same as my JL on a 2” lift on 35s. I don’t have lockers either. That made it even more challenging. Contact Don Alexander. You will not regret having them lead you through the mountains.
Good video. Cannot wait to get back out there
Would love to See it On the Jeep wheeling and see how it holds up.
soon
Take a shot every time he says the word "basically"and you'll be drunk by the three minute mark. I counted 36 "basically"'s in the whole video which is about 2.5 "basically"'s per minute 😂
So does this mean that if you run a front antirock, but not or nothing in the rear, it's semi pointless?
You can run a front Antirock with the stock rear bar but the front to rear balance is not ideal.
In my experience anything 33” or larger should be balanced in static mode. I always hear people saying “you should really Road Force balance it” but the majority of those people are clueless on how tire balancing works. Road Force machines can’t properly match large (33”+) tires just because the machine doesn’t have that capability in that mode. It doesn’t matter if you have a 4th generation or even a newer 5th generation Road Force machine, either. The other thing people don’t realize when they complain about having a tire static balanced vs dynamically is that a large tire that has been static balanced will probably never go faster than 90 mph which most M/T’s are rated for 100mph. Drag racers and road racers alike use static balancing for high speed driving. IF you choose to balance your large tires dynamically then it would be best practice to balance your tires every 20,000 miles.
Damm the dealer is replacing the whole axle and sensor, just got word today. 31k miles eco diesel gladiator
Really? Basically? LOL wish I has 5 bucks for each one.
So question...Does the tie rod rub against the brake rotor at all at full turn? Because I have a 2014 JK and installed this tie rod, cut away a piece of the brake dust shield, and the tie rod still rubs my rotors at full turn. I have a good little groove dug into both of my rotors because of it.
😂 this guy is clueless 😂 omg
😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍 Jeep Wrangler 😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍
That tire is BAD ... I can see its lumpy as it spins.
This video is older but you’re why I went with Nexen mxt m/t. Your experience is what I listen to being new to off-roading. I want to learn how to correctly. Thank you for sharing your knowledge.
Thank you for the positive comment!
I just ordered mine
My dealer put 51 psi in my rav4 tires say 51psi max load on the tire. Yet door says 35psi this is odd why they do that? Should I lower it to 35psi btw they used nitrogen
Auto manufacturers suggest high tire pressures to improve the corporate fuel economy numbers. Over-inflated tires accelerate wear and reduce traction. The only accurate way to determine optimum tire pressures for the highway/street is to do a chalk te4st. Search for videos on the tire chalk test on KZread or Google.
sweet.
Quick question, would a static balance work good as a dinámic balance?
No! Dynamic balancing improves lateral balance in addition to vertical (bouncing) balance. This reduces the chance of death wobble (but does not eliminate the chance of death wobble).
i static balance all my tires and NONE give me any vibrations
Yes its fine
@@SKANK_HUNT49 ok
on front lower control arms , does it matter if the Johny joints are on the front of the arms or the rear .?
Thanks for your question. The Johnny Joint should attach at the frame, not the axle.
Just got mine yesterday. Going to test the crap out of them Sunday. 😁
Good luck and have fun. They seem to work well for us.
Thank you for making this video. Super easy. Great job!
Glad it was helpful!
Couldn't happen to a nicer guy. Seriously, I've only wheeled with Don once but he is about the nicest guy you can meet. That is a crazy break. (They both were.) Glad you guys were able to get home safely.
Thanks for the well wishes. The fact that these two breaks happened ten feet from each other made our heads swim.
What are the chances of this situation happening? Insane!
Gag me with your soundtrack even before I hear a word.
Thanks for the feedback. Have yo listened to any of the neer versions and what is your opinion? Music is such a personal choice and I would like to have sound tracks that are not offensive, somewhat enjoyable and really nothing that stands out. Appriciate yor feedback. Thanks.