Пікірлер

• 
  @user-qz3zf4bw5m3 ай бұрын

  Hi Team, Is it possible to share a video showing us how you dismonted this vaccum cleaner ? FYI, I have the same issue as yours with my Hoover FD22BC 011. Thanks in advance for your help 😀

• 
  @rubensst65883 ай бұрын

  muito bom

• 
  @ErnieSesameStreet4 ай бұрын

  Can the PCB be reuse?

• 
  @haraldfranke62757 ай бұрын

  Hello, I need your help i have the problem motor very loud and i like to dismantle the FD22 but if i remove all screws which i can see (2 behind the motor filter) and 4 at the akku pack i can not open it. Who i have to remove more screws? Can you help. Thank you

• 
  @ianmccracken636510 ай бұрын

  Sorry (motor)

• 
  @ianmccracken636510 ай бұрын

  Have you any info on how to open the access to the mother ( how do you get the top of)

• 
  @ao4514 Жыл бұрын

  Thanks 👍 My left click isn't working. Any advice or suggestions?

• 
  @MatthiasRosin Жыл бұрын

  your audio sucks, dude

• 
  @wrdna58 Жыл бұрын

  All very good but what the hell is happening here

• 
  @Freebird67 Жыл бұрын

  Very bad videos sound keeps going in and out

• 
  @auged5946 Жыл бұрын

  I’ve got the same ones but the issue is it doesn’t even turn on. What’s the most likely issue here?

• 
  @js1360 Жыл бұрын

  guys, find another movie about red light - basically get wd40 and spray that fan on engine. it's 60 sec job. worked for me.

• 
  @johncoscia52582 жыл бұрын

  HI ,thanks . I love these batteries as do Makita , so if your deciding to replace now that they fit in current stuff you get your answer . Solder your normal wire and use this flux for SS if you want , it smells but makes quick work of soldering 18650s. 35ml Stainless Steel Flux Solder, Stainless Steel Liquid Solders, Durable Water Liquid Solders.... Lol.

• 
  @3abdangry2 жыл бұрын

  Could you please help me with the battery terminals which pin is + and - , I'm going to MOD this same hoover but I don't have a battery with it, I know it has 6 pins I just need to determine which of them is negative and positive power input. thanks :)

• 
  @markw39222 жыл бұрын

  well done to you ! its great to see a repair rather than skip it a bit of time and couple of quid & you have a saving thanks for sharing

• 
  @kevinclark28562 жыл бұрын

  my hoover wont work press the button and blue light comes on ??

• 
  @vladanpresic2222 жыл бұрын

  I did the same battery but after a place new cell’s don’t want to charging and I don’t now why.?

• 
  @ajkiddster2 жыл бұрын

  Thank you. Your video helped me fix my window vac. My motor would not move at all and the light would flash red. Opened it up with help from your video and it seems the motor was knocked out of place slightly (Prob from multiple drops). Works like normal now. Thanks again.

• 
  @niknaglo73212 жыл бұрын

  Спасибо за видео, приятель пытался менять батареи, но у него перестала заряжаться от родного зарядного устройства...

• 
  @user-sc9dh6jg7n2 жыл бұрын

  у меня также, вчера менял и не заряжает

• 
  @user-dw6ld5xd6n Жыл бұрын

  @@user-sc9dh6jg7n нашли решение проблемы?

• 
  @jimmyjones16342 жыл бұрын

  I’ve soldered 3x it’s still giving me same issue

• 
  @allesklar72672 жыл бұрын

  What symptoms your detailer has?

• 
  @stephenmacks232 жыл бұрын

  The fan is loose and lifts up as it spins causing the motor to stall, try getting a fan of eBay.

• 
  @danyalkhan94003 жыл бұрын

  Yo bro are you in the uk and would you be able to do a repost if I sent you one?

• 
  @tonyfiore30813 жыл бұрын

  Hello I have the same vacuum cleaner but different problem the vacuum cleaner as soon as I switch on the power remains on and does not turn off. Do you have any solutions?

• 
  @richardthered3 жыл бұрын

  My Hoover H-200 worse buy ever. Only 2 months old already its not working due to poor electrics. Lucky its under guarantee and im having another body sent as the battery indicator says its charged but it does not work. Not impressed at all to tell the truth, i got told by my friends to spend a bit more and avoid Hoover i wished i listened now

• 
  @nemac_SD3 жыл бұрын

  are you using batteries with pcb protection or regular ones?? thanks.

• 
  @sol050331493 жыл бұрын

  Regular 18650 but ones with high amp draw.

• 
  @nemac_SD3 жыл бұрын

  @@sol05033149 What you mean by "high amp draw"? You mean high mAh? Thanks for replay..

• 
  @GianlucaCataldo3 жыл бұрын

  @@nemac_SD 18650 made for high current discharge appliance: drills and electronic cigarettes needs this kind of batteries, not regular ones. "VTC4" have 30 Ampere peak current discharge, for istance. If you use a regular 18650 in appliances that draw high current, it can explode.

• 
  @nemac_SD3 жыл бұрын

  @@GianlucaCataldo Thanks a lot.. Keep a good work..

• 
  @tautegu2 жыл бұрын

  @@GianlucaCataldo For something like this driver, are high draw current cells still required? I'm about to rebuild this exact driver but a 10.8V version.

• 
  @willylupo3 жыл бұрын

  How did you open it?

• 
  @mario7mag3 жыл бұрын

  How has it been holding up? Thanks for the video!

• 
  @sol050331493 жыл бұрын

  Working great. Been using it nearly everyday. Thanks for watching!

• 
  @stephendaly85933 жыл бұрын

  Would have been great to see how you took it apart or at least back together. Have the same hoover. Works ok but wanted to get inside to give the motor a full clean.

• 
  @sol050331493 жыл бұрын

  I made a total mess of opening it, ended up opening all the screws and prying it open.

• 
  @frien_d2 жыл бұрын

  @@sol05033149 came here because I'm opening one and after removing all screws, I don't know where to pry

• 
  @sundelight82303 жыл бұрын

  Hi i have this model hoover i was using it in the car but it was raining and i think a bit of water has gone in the motor but it works and its flashing a red light can you help thanks

• 
  @sharmilpradeep23633 жыл бұрын

  Horrible

• 
  @tonyhaddock46993 жыл бұрын

  Just followed your fix and thought it had solved it because it sounded much better. But still doesn't run for more than a few seconds. Just checked the battery and it reads 2.7v after a full charge but it says 3.7v on the side. So I presume the battery is stuffed, which is annoying because it's only 2 or 3 years old and it's soldered in place so won't be so easy to fix as a squirt of oil 😭

• 
  @stephenmacks232 жыл бұрын

  Loose fan, lifts up as it spins causing the motor to stall

• 
  @newry1234 жыл бұрын

  nice one,,i have the same hoover but it only runs for a few seconds then stops, let it sit for a couple of seconds then it starts and stops again after a few seconds ,any ideas, cheers

• 
  @simonak2724 Жыл бұрын

  i have same issue with newer model of this-looks the same but colors different. I get red/blue flashing light with charger so its likly a battery issue

• 
  @michalbaca81654 жыл бұрын

  You helped me a lot, thx

• 
  @jonnidazzles69684 жыл бұрын

  Hi mate I have the same Hoover it won't turn on .when I put it on charge the led flashes blue and red , any idea what it might. Be thanx

• 
  @sol050331494 жыл бұрын

  Hi mate, could be blocked with dust or the battery is not seated correctly. 1.Try turn it on without the brush head part connected, To see if that's jammed up. 2. Take the air filter out the back(one with two clips) and look down the hole of the main unit at the back there is a plastic grill on the hoover see if there dust booking it, try remove it with tweezers if you can. 3. Try wiggle or push the battery and check the connection are clean and not broken. 4. Try a friend's battery 😀 Hope you fix it!

• 
  @sol050331494 жыл бұрын

  Also somtimes when you push the battery in, the connection on the UNIT itself might get pushed back if they are loose/broken. Try add some folded up paper on the back of the battery terminal to hold it in place or a toothpick.

• 
  @kriskutolowski83474 жыл бұрын

  Thanks for sharing your video. I have the same issue so please let me know where you bought P-Channel D4185 as I can't find it anywhere. Could you please share link where to buy it please.

• 
  @sol050331494 жыл бұрын

  Hi, I tired to get them from DigiKey but the postage was too expensive. I got mine from china after, I doubt they are original but work fine and I have been using the hoover everyday with no problems. I have added the links to the description. Hope you fix it!

• 
  @putuwidnyana13334 жыл бұрын

  Many thanks ,very good

• 
  @Bmxmusikian5 жыл бұрын

  Use curtain wire

• 
  @SadamAhamed5 жыл бұрын

  Nice techniques, I think we can use plastic wire tight with cloth to insert

• 
  @abumusa87485 жыл бұрын

  Eheim sell a brush on a long handle to clean the pipes

• 
  @awaiskhandc43026 жыл бұрын

  How to insert the cloth?

• 
  @sol050331494 жыл бұрын

  Try to spin or twist the cloth while pushing.

• 
  @arielban16 жыл бұрын

  Awesome.. best method I have seen thus far. I will do the same,but will use a twine rope as I dont have a hose with a cut end. thank you for taking the time to share.

• 
  @nyathi7776 жыл бұрын

  Thanks. Good method.

• 
  @headlessjoker9811 жыл бұрын

  Nice bass range good kick

• 
  @sol0503314911 жыл бұрын

  Use a safety pin as normal ones keep opening.

• 
  @GUYANAAAAAAAAAAAAAAA11 жыл бұрын

  Nice... tried to sub but can't

• 
  @sol0503314911 жыл бұрын

  He/She will get big but its aggregation is ok atm. will see when it gets BIG. Tanks 400L, 5 ft

• 
  @Steffano2A11 жыл бұрын

  Nice tank and yes we have very similar set ups, what size is your tank. That Venustus is going to get really large and may be out of place in your set up.