I never would have gotten this without this video and ive done hundreds of door handles 😩 easily the worst designed handel i have seen in my life
@HighnovaАй бұрын
🎉yes it did thank you 🤗
@hermanoGabrielАй бұрын
Thank you!!❤
@mariovalencia646Ай бұрын
Thanks pal this is the only video i found on thats task very helpful
@chemisc00Ай бұрын
What happens when the mechanism stops working and you need to put gas in the car but can't open the fuel door
@mikeward1975Ай бұрын
They must have changed the design at some point .....I had to remove the 1 screw behind the front of the handle also on my 16RT
@user-mz7px1ue2tАй бұрын
Cannot be explained better very helpful thank you very much
@klperchАй бұрын
Thanks mate reminds me of the Mercedes ML Class cars from around 2010 / 2012
@TaeeGАй бұрын
I just went and tried it and it really worked. My keys been locked in my trunk for awhile and now I got them out because of this vi
@freddyramirez30742 ай бұрын
What a pain in the arse!!! Thanks for the help though!
@patricksullivan62692 ай бұрын
Excellent video - saved me so much time. I used two of the right angle hook tools under the clip edges rather than under the liner after watching your video and they all popped out/were pried out and went back in fine after replacing the gnawed on windshield wiper hose. THANKS SO MUCH!
@Reys-Handle2 ай бұрын
Silverados are also designed stupidly like this 🙄🙄
@nwcEVO2 ай бұрын
Thanks bro!
@jordangulley16872 ай бұрын
Very helpful thanks
@RickAlltow2 ай бұрын
Thanks for taking the time to make this video. Very helpful. Saved me a few f-bombs.
@GusMahn2 ай бұрын
What a F’g stupid set up. Thank you
@IsmaelNicolasGarciApascual2 ай бұрын
Exelente gracias
@reycrusat64252 ай бұрын
Thank you
@louboomerz9573 ай бұрын
What was that toll you used at the 2:10 part of the video
@jamiedavis25883 ай бұрын
Thanks for the info . My girls compass She put the window down now it doesn’t want to go up and it guys like you that make it easy for guys like me to fix stuff
@AlejandroLopez-ut7qn4 ай бұрын
Muuuuuchas gracias me sirvió muchísimo 🎉🎉🎉🎉
@leonnewhall70884 ай бұрын
Okay how about the bottom adjuster?
@InTheGame214 ай бұрын
I came to the comments hoping someone had luck😂😂😂
@reinlorenzi94114 ай бұрын
thanks for the information it helped big time brother🙏
@80s94 ай бұрын
And how the freak did u get the hood open smart guy lol
@rubendelgado71074 ай бұрын
You never say how to get it out the door to get the clip out side is simple
@johnsutcliffe32094 ай бұрын
Thanks for this. Very helpful. I am fitting a new tow bar to mine
@many41735 ай бұрын
F it ... Break um and put new ones
@ericanderson85565 ай бұрын
Got them! Thanks!
@ToxicSapiens5 ай бұрын
These clips are devils. You unscrew and it's still locked. What was the point Toyota was trying to make ? ... as if a screw was not enough.
@666DemonicEntity6 ай бұрын
Im no mechanic by any means but i watched you video and ended up swapping out my bumper , grill , and headlights so i legit wana thank u for this video u saved me $1800 literally what the mechanic was going to charge me ….
@smckeon286 ай бұрын
How do you adjust a 2019, I dont see a screw above the headlights
@RedTex456 ай бұрын
T20 Torx or (better) a 7mm socket, 1/4" drive. CCW raises, CW lowers the beam.
@jonathanforlin18546 ай бұрын
What if the lock mechanism is frozen or broke and your sitting at the gas station on empty...😢
@aaronfisher63666 ай бұрын
Not all heroes wear capes 🫡
@superiormeh7 ай бұрын
Your assistance was most appropriate and appreciated
@LordTomServo7 ай бұрын
So, do I have to remove the whole panel to switch out a passenger window, or can I do it by removing just that top assembly and clips?
@fernandorivera23957 ай бұрын
What about passengers' side adjustment, not immediate access like on the driver's side 🤔
@cw37287 ай бұрын
Get a tripod FFS
@raccoongod3047 ай бұрын
Helps a lot when you can’t get in the car to open the hood
@davidruiz53838 ай бұрын
Great video, my 2011 Tacoma horn not working. Which relay can I swap to test if relay is good or bad on horn. Thanks
@UremicFrost8 ай бұрын
You da man dawg! Ty
@bigbird92268 ай бұрын
It's not you should have done one for the rear
@TimM5198 ай бұрын
This shows how to take it apart you should have done this while it’s in the door still
Пікірлер
Thank you sir
Incredibly helpful, thanks for the video!
Any link to the tool being used in the beginning?
Thx
Great video thank you for sharing this!
Thank you🎉
I never would have gotten this without this video and ive done hundreds of door handles 😩 easily the worst designed handel i have seen in my life
🎉yes it did thank you 🤗
Thank you!!❤
Thanks pal this is the only video i found on thats task very helpful
What happens when the mechanism stops working and you need to put gas in the car but can't open the fuel door
They must have changed the design at some point .....I had to remove the 1 screw behind the front of the handle also on my 16RT
Cannot be explained better very helpful thank you very much
Thanks mate reminds me of the Mercedes ML Class cars from around 2010 / 2012
I just went and tried it and it really worked. My keys been locked in my trunk for awhile and now I got them out because of this vi
What a pain in the arse!!! Thanks for the help though!
Excellent video - saved me so much time. I used two of the right angle hook tools under the clip edges rather than under the liner after watching your video and they all popped out/were pried out and went back in fine after replacing the gnawed on windshield wiper hose. THANKS SO MUCH!
Silverados are also designed stupidly like this 🙄🙄
Thanks bro!
Very helpful thanks
Thanks for taking the time to make this video. Very helpful. Saved me a few f-bombs.
What a F’g stupid set up. Thank you
Exelente gracias
Thank you
What was that toll you used at the 2:10 part of the video
Thanks for the info . My girls compass She put the window down now it doesn’t want to go up and it guys like you that make it easy for guys like me to fix stuff
Muuuuuchas gracias me sirvió muchísimo 🎉🎉🎉🎉
Okay how about the bottom adjuster?
I came to the comments hoping someone had luck😂😂😂
thanks for the information it helped big time brother🙏
And how the freak did u get the hood open smart guy lol
You never say how to get it out the door to get the clip out side is simple
Thanks for this. Very helpful. I am fitting a new tow bar to mine
F it ... Break um and put new ones
Got them! Thanks!
These clips are devils. You unscrew and it's still locked. What was the point Toyota was trying to make ? ... as if a screw was not enough.
Im no mechanic by any means but i watched you video and ended up swapping out my bumper , grill , and headlights so i legit wana thank u for this video u saved me $1800 literally what the mechanic was going to charge me ….
How do you adjust a 2019, I dont see a screw above the headlights
T20 Torx or (better) a 7mm socket, 1/4" drive. CCW raises, CW lowers the beam.
What if the lock mechanism is frozen or broke and your sitting at the gas station on empty...😢
Not all heroes wear capes 🫡
Your assistance was most appropriate and appreciated
So, do I have to remove the whole panel to switch out a passenger window, or can I do it by removing just that top assembly and clips?
What about passengers' side adjustment, not immediate access like on the driver's side 🤔
Get a tripod FFS
Helps a lot when you can’t get in the car to open the hood
Great video, my 2011 Tacoma horn not working. Which relay can I swap to test if relay is good or bad on horn. Thanks
You da man dawg! Ty
It's not you should have done one for the rear
This shows how to take it apart you should have done this while it’s in the door still