great video, but could you describe in detail what you are actually doing and I would welcome a slightly better image😀😀😀
@nicholasm22542 ай бұрын
What are you using for the loop back to find IR
@kor33212 ай бұрын
The interface uses octacapture and is connected to in 8 and out 8.
@Tony-tw1fo3 ай бұрын
where can I get the sub and top lines? "My large trace" top, low, sub+top.trf can you give me a link where to download it?
@kor33213 ай бұрын
Hello Tony.... The top and sub target traces in the video were created using my IIR DSP.
@abinashrao51453 ай бұрын
Can you please send me target trace file
@brian_malota4 ай бұрын
If you only have one mic, in my case a sonarworks reference ID RTA mic, would you suggest tuning my left right by just tuning one side (having mic as close to the speaker as possible and running pink through just that one speaker) and then copying and pasting the eq to both sides or would it beneficial to run pink through both while being center to the two? Or would that create comb filtering?
@kor33214 ай бұрын
Hello brian malota ^^ ~I measure on one axis (right speaker), copy the EQ and paste it (left speaker).
@samuelkennethacquah10684 ай бұрын
Hello sir, great video. Please i want to ask how you placed the four microphones in the room. Thank you
@kor33214 ай бұрын
Thank you.... Speaker 2m from the front. 4m. 6m. 8m. The height is 1.2m.
@samuelkennethacquah10684 ай бұрын
Thanks for the reply. But were they All on axis or some were off axis of the speaker.
@kor33214 ай бұрын
Located on the speaker axis
@samuelkennethacquah10684 ай бұрын
@@kor3321 thanks sir much appreciated
@kor33214 ай бұрын
The speaker configuration is 1+2 on top, 3+4 speakers on the bottom, and 5+6 speakers.
@monitorka63404 ай бұрын
share your targets)
@kor33214 ай бұрын
안녕 친구…타켓 트레이스는 사람의 기준이 다름니다 소리를 듣고 DSP에서 스스로 만들어야되고 소리를 듣고 본인의 판단해야됩니다 그리고 중요한건 smaart 는 도구입니다 판단은 당신의 능력입니다^^~
@LeeFordDiYs5 ай бұрын
Nice. Where can I get that target trace? Thanks
@kor33214 ай бұрын
My target trace was created by myself in IIR DSP(Eq)
@jonathanhatchmusic5 ай бұрын
Thanks for the video! I feel like a voiceover or more in-depth notes would be helpful!
@mez95185 ай бұрын
Nice video! Can you please elaborate what are you looking for exactly on 9.20 using group delay function?
@kor33215 ай бұрын
Group delay allows you to see frequencies that are interfered with by reflections. You should not touch the EQ on any frequencies that are raised or lowered.
@jonathanhatchmusic5 ай бұрын
@@kor3321is this why you didn’t address that peak around 1.7kHz, because it was showing as flat with Group Delay?
@kor33215 ай бұрын
1.7khz is the crossover point. So I didn't use IIR Eq.
@jonathanhatchmusic5 ай бұрын
@@kor3321 ahh. Does that mean you ended up adjusting with an FIR filter?
@kor33214 ай бұрын
no. The video is IIR DSP. I will prepare a video unsing FIR in the next video
@sounddaddy99495 ай бұрын
What system processor do you use?
@aleixwaves87905 ай бұрын
It’s ArmoniaPlus system design, from powersoft. I think so.
@kor33215 ай бұрын
Yes, it's ArmoniaPlus system design, and I use it with Quad matched mic
@jonathanhatchmusic5 ай бұрын
@@kor3321this would be with PowerSoft amps, right?
@hernanvilla83248 ай бұрын
Excelente amigo lo felicito
@jehan_ffernandes9 ай бұрын
Tenho Smaart disponível v8 e v9 windows e Mac
@halidharis10 ай бұрын
Which one got delayed?? Top or sub??
@parrishroberson851411 ай бұрын
Why such bad phase traces?
@mr81quangnguyen Жыл бұрын
Do I need to find delay for the subwoofer? Thanks
@iandeegrees15099 ай бұрын
try to move your sub
@andersondonizetelima9010 Жыл бұрын
how do I buy it?
@ThanhLe-cf3lu Жыл бұрын
Thật tuyệt vời , thưa ngài sao tôi không thấy ngài EQ sub , xin cảm ơn ngài cho ý kiến
@martinmarvinche Жыл бұрын
costo
@Abdullah-hc1cz Жыл бұрын
you should learn how to talk
@nguyencuongvlog5661 Жыл бұрын
Cho tôi xin phần mềm smart V9 được không?
@emperor0090 Жыл бұрын
Did you flip the phase or just added delay?
@kor3321 Жыл бұрын
only phase. The difference between top trace and sub trace is 180° Thank you. pieter-jan Raffo.
@Bubbleuprubberdown Жыл бұрын
Try using pseudo random pink next time. The up riggers will thank you.
@noir1910 Жыл бұрын
That sounds great!!
@paulocastillo2458 Жыл бұрын
Pregunta. Posición del mic ?. Saludos.
@kor3321 Жыл бұрын
Por encima de LIVE IR 3,79 (tiempo ms) Esto significa 3,79 ms * 340 = 1 m 28 cm La distancia entre el altavoz y el micrófono es de 1 m (28 cm es el tiempo de retardo DSP) Gracias
@paulocastillo2458 Жыл бұрын
@@kor3321 Muchas gracias por tanto aporte.
@rome_6676 Жыл бұрын
very nice!!
@rome_6676 Жыл бұрын
nice~😍
@NARIN_M Жыл бұрын
Thank you!!
@newtrack5729 Жыл бұрын
Download link
@daveeckblad Жыл бұрын
There are free screen recording apps out there.
@user-vp7bo9hx3f Жыл бұрын
세계의 많은분들이 보고있내요. .저도 잘봤습니다. .
@user-vp7bo9hx3f Жыл бұрын
좋아요...^^
@aucklandpergamino1856 Жыл бұрын
Finally someone that actually helps and gives the fucking key.
@gamersmith143 Жыл бұрын
i love u so much bro, thanks very much
@mohamedabdelmoneam3088 Жыл бұрын
BROOO thankyou so much, this really helped and the tutorial was really easy to use as well :)
@flaneuringcurator Жыл бұрын
i have no knowledge of this field but it helps me to understand basic of the program a lot. thanks for the good video! :)
@thiego781 Жыл бұрын
Você tem o programa para min enviar zipado ....
@wallisonpereira7573 Жыл бұрын
Thank you so much this helped a lot!!!! You saved my life
@yahjason Жыл бұрын
You can screen capture using OBS. Thanks for the video!
@adrianuran3953 Жыл бұрын
YA ES LA VERCION 9
@heekyoungkim8318 Жыл бұрын
Sehr gut
@heekyoungkim8318 Жыл бұрын
좋아요
@noelbulls8628 Жыл бұрын
Why didn’t talk?
@kor3321 Жыл бұрын
It's my first time.....The voice is being prepared for the next video. Thanks
Пікірлер
superb
Why So Many Coherence Are There
👌
great video, but could you describe in detail what you are actually doing and I would welcome a slightly better image😀😀😀
What are you using for the loop back to find IR
The interface uses octacapture and is connected to in 8 and out 8.
where can I get the sub and top lines? "My large trace" top, low, sub+top.trf can you give me a link where to download it?
Hello Tony.... The top and sub target traces in the video were created using my IIR DSP.
Can you please send me target trace file
If you only have one mic, in my case a sonarworks reference ID RTA mic, would you suggest tuning my left right by just tuning one side (having mic as close to the speaker as possible and running pink through just that one speaker) and then copying and pasting the eq to both sides or would it beneficial to run pink through both while being center to the two? Or would that create comb filtering?
Hello brian malota ^^ ~I measure on one axis (right speaker), copy the EQ and paste it (left speaker).
Hello sir, great video. Please i want to ask how you placed the four microphones in the room. Thank you
Thank you.... Speaker 2m from the front. 4m. 6m. 8m. The height is 1.2m.
Thanks for the reply. But were they All on axis or some were off axis of the speaker.
Located on the speaker axis
@@kor3321 thanks sir much appreciated
The speaker configuration is 1+2 on top, 3+4 speakers on the bottom, and 5+6 speakers.
share your targets)
안녕 친구…타켓 트레이스는 사람의 기준이 다름니다 소리를 듣고 DSP에서 스스로 만들어야되고 소리를 듣고 본인의 판단해야됩니다 그리고 중요한건 smaart 는 도구입니다 판단은 당신의 능력입니다^^~
Nice. Where can I get that target trace? Thanks
My target trace was created by myself in IIR DSP(Eq)
Thanks for the video! I feel like a voiceover or more in-depth notes would be helpful!
Nice video! Can you please elaborate what are you looking for exactly on 9.20 using group delay function?
Group delay allows you to see frequencies that are interfered with by reflections. You should not touch the EQ on any frequencies that are raised or lowered.
@@kor3321is this why you didn’t address that peak around 1.7kHz, because it was showing as flat with Group Delay?
1.7khz is the crossover point. So I didn't use IIR Eq.
@@kor3321 ahh. Does that mean you ended up adjusting with an FIR filter?
no. The video is IIR DSP. I will prepare a video unsing FIR in the next video
What system processor do you use?
It’s ArmoniaPlus system design, from powersoft. I think so.
Yes, it's ArmoniaPlus system design, and I use it with Quad matched mic
@@kor3321this would be with PowerSoft amps, right?
Excelente amigo lo felicito
Tenho Smaart disponível v8 e v9 windows e Mac
Which one got delayed?? Top or sub??
Why such bad phase traces?
Do I need to find delay for the subwoofer? Thanks
try to move your sub
how do I buy it?
Thật tuyệt vời , thưa ngài sao tôi không thấy ngài EQ sub , xin cảm ơn ngài cho ý kiến
costo
you should learn how to talk
Cho tôi xin phần mềm smart V9 được không?
Did you flip the phase or just added delay?
only phase. The difference between top trace and sub trace is 180° Thank you. pieter-jan Raffo.
Try using pseudo random pink next time. The up riggers will thank you.
That sounds great!!
Pregunta. Posición del mic ?. Saludos.
Por encima de LIVE IR 3,79 (tiempo ms) Esto significa 3,79 ms * 340 = 1 m 28 cm La distancia entre el altavoz y el micrófono es de 1 m (28 cm es el tiempo de retardo DSP) Gracias
@@kor3321 Muchas gracias por tanto aporte.
very nice!!
nice~😍
Thank you!!
Download link
There are free screen recording apps out there.
세계의 많은분들이 보고있내요. .저도 잘봤습니다. .
좋아요...^^
Finally someone that actually helps and gives the fucking key.
i love u so much bro, thanks very much
BROOO thankyou so much, this really helped and the tutorial was really easy to use as well :)
i have no knowledge of this field but it helps me to understand basic of the program a lot. thanks for the good video! :)
Você tem o programa para min enviar zipado ....
Thank you so much this helped a lot!!!! You saved my life
You can screen capture using OBS. Thanks for the video!
YA ES LA VERCION 9
Sehr gut
좋아요
Why didn’t talk?
It's my first time.....The voice is being prepared for the next video. Thanks
❤ good
Buenísimo 🙌
hay❤
와 좋네요^^