What if they locked up mine just did that and smoking the drives
@Andreyshevtsov-xb1hl2 күн бұрын
Hello! Are you changing the oil in an automatic transmission?
@wisdom91954 күн бұрын
Mine is on the back of the truck, I guess it’s the same process.
@user-wm7mz7qx8v6 күн бұрын
Why release it back again after tightening it, sorry if it sounds stupidity ,new in trucking business ?
@williamcase4269 күн бұрын
Replace dem pads
@jackman200113 күн бұрын
Do you recommend these LED lights?
@erickreyes515613 күн бұрын
Gracias.
@HuaLEE.27 күн бұрын
这个工具不错
@sseeaahhaawwkkssrule97529 күн бұрын
How much did the transmission fluid cost?
@jonplay3602Ай бұрын
What was the spray you put so there's no corrosion?
@rollingwitsolo7337Ай бұрын
What size impact wrench did you use 1/2 inch or 1 inch
@just-incase3483Ай бұрын
Those are quarter fenders, not half fenders.
@Ronaldo777-siuuАй бұрын
Are 3000 your inverted?
@jmaegmАй бұрын
Just push the sleeper button in the front controls
@luckysonlyАй бұрын
It's called a sway bar link
@paulthibodeau1269Ай бұрын
Just ran across this in my feed. V6 car with a V8 front end?
@jamessmo7062Ай бұрын
520463
@jamessmo7062Ай бұрын
3323
@AnTmOREACTSАй бұрын
Does a bad shock make truck lean to one side? I have a box truck, 2018 Freightliner M2 106
@RezEdroso2 ай бұрын
need update more
@bernardthompson192 ай бұрын
Thank you so much sir…I just changed my drivers side door handle!!! God Bless Brother!!!
@thadiesel76552 ай бұрын
Were your oem bulbs halogen or led?
@brucemalcolm84012 ай бұрын
Why I’m I seeing several fuel spots on the back of 2017 cascadia also on trailer front? Could the fuel vents pushing out fuel when driving? It’s been happening for a while now.
@user-gw6de4jy1j2 ай бұрын
👍 Great im going to do mines know. AWESOME!!!
@user-gw6de4jy1j2 ай бұрын
Is it good to do both sides when you have 1 of these to go bad on you. Or just the 1 that's bad.
@tikakarki2352 ай бұрын
Thank you
@lostvayne1042 ай бұрын
Are you from russia?
@DKUSTOMSGARAGE2 ай бұрын
I born there but live in the USA for last 20years.
@lostvayne1042 ай бұрын
@@DKUSTOMSGARAGE cool, I just wanted to know where that accent was from
@user-nw8oi5zk5t2 ай бұрын
Hello When you turn on this mode, cold air blows whenever you set any temperature.
@someone78812 ай бұрын
Thanks! What sizes are sockets for transmission filter and plugs? Where did you get that pump?
@RBTRANSP212 ай бұрын
👍
@brkbrk52052 ай бұрын
dude those brake shoes will get you ouf of service.
@thereviewer41733 ай бұрын
You forgot to put lube on the o-ring and the rubber ring under the filter. Plus, do not tighten the filter with the tool ever. It will be really tough to take off next time. Generally for any screw-on filter, it is recommended to only use the tool to remove the filter and hands only to tighten it.
@kudos2ya373 ай бұрын
They've had those mounting brackets since the 90s. I've installed enuf after market car radios to know.
@kudos2ya373 ай бұрын
They have a install kit you buy to mount it in place. Guy. You didn't have to modify the outer covering.
@DKUSTOMSGARAGE3 ай бұрын
You can buy now but years ago no.
@alexandrnavumenka60493 ай бұрын
so was it head gasket?
@tyflesh3 ай бұрын
This video is pretty old but watching your video you already had freon in the system. Most times your expansion valves would be the first culprit to check, but without gauges on your ac lines your pissing in the wind trying to figure it out, but by the looks of the gauge on your charge can it wouldn't really let you add too much freon, first sign there's a blockage and those expansion valves close when there not functioning properly.. You have one for the front ac and one for the bunk ac...
@markroussell22913 ай бұрын
What fender flares are you running?
@_SlickRickSS3 ай бұрын
What the link to purchase the fender liner?
@Troymatti3 ай бұрын
Ignorant , that what you are because you already have fog lights but lets blind the incoming ,FY
@user-wd9vs8hg1l3 ай бұрын
fake it til ya make it
@fxwb23423 ай бұрын
was wondering what this huge hole in my liner was for and i couldn't proceed because of it, watched this and seen how dumb i was for not knowing it was for the washer fluid. thanks im done
@dannyespino31284 ай бұрын
Did u apply the trailer brake or the pedal brake
@DKUSTOMSGARAGE3 ай бұрын
No. This is one person install job. You have to set your brakes or release them and then play with a slack adjuster.
@Texas_Made_4 ай бұрын
Hey,be safe out there on the road!
@DKUSTOMSGARAGE3 ай бұрын
Thank you.
@RollingThunder854 ай бұрын
Mines no longer reading any boost i thought it came pre adjusted
@DKUSTOMSGARAGE3 ай бұрын
This is waste of money I would say.
@jimmyjimmy10384 ай бұрын
I just replaced same sensor in my truck, it’s showing me three - - - , any idea what could be the issue, ?
@Jimmy_Cavallo4 ай бұрын
💥 I have to separate the brake line from the caliber and then bring the caliper somewhere to have the threads cleaned up because I stripped them ever so slightly. Could you tell me how to prevent the brake fluid from dripping out of the open line at the caliper end (the banjo bolt) in the half hour that I’ll be gone.??
@amirnadi31554 ай бұрын
Thanks I wants to buy this model buth I see it's garbage
@quatruckin55484 ай бұрын
Do you have the link for this deer guard ?
@DKUSTOMSGARAGE3 ай бұрын
Inbought from a fred dealer
@johnoptions91924 ай бұрын
Good video. So real without any assumptions along the way. After watching the video, I got inspired to do it by myself next time. Thank you for sharing. God bless you. You got any idea of battery repair?
@DKUSTOMSGARAGE3 ай бұрын
They aren’t repairable. Buy from a dealer with 2year warranty with higher amps. Will last a little longer.
@AlkebulanLion673 ай бұрын
The camera angles were very good. Thanks my friend.
@bernie4724 ай бұрын
Good video. I spray a can of Brake Cleaner to spray the rotors to clean them myself.
Пікірлер
What if they locked up mine just did that and smoking the drives
Hello! Are you changing the oil in an automatic transmission?
Mine is on the back of the truck, I guess it’s the same process.
Why release it back again after tightening it, sorry if it sounds stupidity ,new in trucking business ?
Replace dem pads
Do you recommend these LED lights?
Gracias.
这个工具不错
How much did the transmission fluid cost?
What was the spray you put so there's no corrosion?
What size impact wrench did you use 1/2 inch or 1 inch
Those are quarter fenders, not half fenders.
Are 3000 your inverted?
Just push the sleeper button in the front controls
It's called a sway bar link
Just ran across this in my feed. V6 car with a V8 front end?
520463
3323
Does a bad shock make truck lean to one side? I have a box truck, 2018 Freightliner M2 106
need update more
Thank you so much sir…I just changed my drivers side door handle!!! God Bless Brother!!!
Were your oem bulbs halogen or led?
Why I’m I seeing several fuel spots on the back of 2017 cascadia also on trailer front? Could the fuel vents pushing out fuel when driving? It’s been happening for a while now.
👍 Great im going to do mines know. AWESOME!!!
Is it good to do both sides when you have 1 of these to go bad on you. Or just the 1 that's bad.
Thank you
Are you from russia?
I born there but live in the USA for last 20years.
@@DKUSTOMSGARAGE cool, I just wanted to know where that accent was from
Hello When you turn on this mode, cold air blows whenever you set any temperature.
Thanks! What sizes are sockets for transmission filter and plugs? Where did you get that pump?
👍
dude those brake shoes will get you ouf of service.
You forgot to put lube on the o-ring and the rubber ring under the filter. Plus, do not tighten the filter with the tool ever. It will be really tough to take off next time. Generally for any screw-on filter, it is recommended to only use the tool to remove the filter and hands only to tighten it.
They've had those mounting brackets since the 90s. I've installed enuf after market car radios to know.
They have a install kit you buy to mount it in place. Guy. You didn't have to modify the outer covering.
You can buy now but years ago no.
so was it head gasket?
This video is pretty old but watching your video you already had freon in the system. Most times your expansion valves would be the first culprit to check, but without gauges on your ac lines your pissing in the wind trying to figure it out, but by the looks of the gauge on your charge can it wouldn't really let you add too much freon, first sign there's a blockage and those expansion valves close when there not functioning properly.. You have one for the front ac and one for the bunk ac...
What fender flares are you running?
What the link to purchase the fender liner?
Ignorant , that what you are because you already have fog lights but lets blind the incoming ,FY
fake it til ya make it
was wondering what this huge hole in my liner was for and i couldn't proceed because of it, watched this and seen how dumb i was for not knowing it was for the washer fluid. thanks im done
Did u apply the trailer brake or the pedal brake
No. This is one person install job. You have to set your brakes or release them and then play with a slack adjuster.
Hey,be safe out there on the road!
Thank you.
Mines no longer reading any boost i thought it came pre adjusted
This is waste of money I would say.
I just replaced same sensor in my truck, it’s showing me three - - - , any idea what could be the issue, ?
💥 I have to separate the brake line from the caliber and then bring the caliper somewhere to have the threads cleaned up because I stripped them ever so slightly. Could you tell me how to prevent the brake fluid from dripping out of the open line at the caliper end (the banjo bolt) in the half hour that I’ll be gone.??
Thanks I wants to buy this model buth I see it's garbage
Do you have the link for this deer guard ?
Inbought from a fred dealer
Good video. So real without any assumptions along the way. After watching the video, I got inspired to do it by myself next time. Thank you for sharing. God bless you. You got any idea of battery repair?
They aren’t repairable. Buy from a dealer with 2year warranty with higher amps. Will last a little longer.
The camera angles were very good. Thanks my friend.
Good video. I spray a can of Brake Cleaner to spray the rotors to clean them myself.