You should be able to change springs easily, the X56 comes with different tensions. I was using the softer one but for helis recentering is not adecuate... so I created this.
@The_Fabio_Fernandes12 күн бұрын
Manda para mim no Brasil hahahah quero pilotar helis no FS2020 mas ta dificil com meu Hotas 56!!
@MarcosHidalgo12 күн бұрын
I'm sorry but I don't print on demand... but surely you could find someone in Brazil who does :)
@Fjcc1971Ай бұрын
It Rocks lol🤣
@marianorodriguez5885Ай бұрын
Jajaja, magnífico Marcos, temazo
@Angel-or9dpАй бұрын
👏👏👏🤟
@davalillo604Ай бұрын
Temazo
@Toni-if4rjАй бұрын
Mola ❤
@louis-nb6sx3 ай бұрын
THANKKK
@user-nb3ef3tj4d5 ай бұрын
stl plz
@realnoslabiy8 ай бұрын
How to throw grenade?
@evgeniydragondog8 ай бұрын
wow awesome work!
@user-us8jp9pu5h9 ай бұрын
puedes pasar el perfil del loco ivan quiero hacer esas maniobras con solo decirlo
@ebehdzikraa385511 ай бұрын
his magazine has fatal design flaw. the whole gas pressure inside container was hold by small yet fragile potmetal ears pivot point shown in 5:24 - 5:30 mine suddenly explode out of the blue when stored with gas inside. upon inspection, the ears pivot point was failed to contain gas pressure, and the whole top part of magazine were shot upward at high velocity. it is shameful that this good quality external material of magazine, made by renowned manufacturer, but has such a fatal design flaw that could easily identified
@carbongreen3498 Жыл бұрын
cool!
@sirbaskerville4609 Жыл бұрын
what is the name of the game?
@NeonLuvBar Жыл бұрын
Garmin Edge mount
@mrman7371 Жыл бұрын
honestly looks like more effort than its worth to use lol might give it a try if get time
@MarcosHidalgo Жыл бұрын
I've been using pretty much the same design since Oculus Go, then Q1, now Q2... it is an effortless printing and it increases game inmersion by 500%
@Zeltroix Жыл бұрын
Jack Black?
@galphie59972 жыл бұрын
Esto está GUAPÍSIMO.
@gamelist45622 жыл бұрын
Hello, what is your other hardware and graphics settings, can you share please?
@CodenameNovacaine2 жыл бұрын
Where can I get this mod?
@MarcosHidalgo2 жыл бұрын
I didn't finished it, the player sheets are almost complete, I was preparing the "plane creation" that presets armor and weapons, and the payload... but I found some bugs in TTS that made me lose a bit of push in this project... and I've to prepare the 3D models for the planes (using my 3D models available at Cults and Thingiverse). So, it is still a work in progress, I've to go back to it at some point but right now it isn't playable, nor ready to release even in Alpha stage
@CodenameNovacaine2 жыл бұрын
@@MarcosHidalgo I need this in my life.
@CodenameNovacaine2 жыл бұрын
You're my new best friend!
@CommanderNemo12 жыл бұрын
This is awesome! I didn't even know you could use VR like this.
@StantonLuke2 жыл бұрын
Is the right hand controller seat glued onto the rail?! I have printed it and it’s obviously free of the handle? Do I glue it? The reason I ask is that you can do it without but the grip is nice as a side are piece too.
@MarcosHidalgo2 жыл бұрын
Hi there! yes! glue it!! the idea is to have the right controller (dominant hand) attached to the "tube" and have the reloading hand free to throw grenades, reload or whatever action you need... It is a different concept from the double magnet stocks, but for me it works fast, it's simple and sturdy, and helps you to get a good muscle memory for your weapon, even when you have to shoot one handed. Grip is great for pistol only games like Arizona sunshine or pistol whip, I have additional grips for that sole purpose.
@StantonLuke2 жыл бұрын
@@MarcosHidalgo perfect, I actually glued it last night and you are so right! It’s a great stock, I have the 15mm version printed and fits over a 16mm carbon fibre rod, I place a short piece of tubing inside before curing so it doesn’t stress it once it’s cured! It’s light and easy to use! Thanks for a great design, it prints so well on a resin printer.
@MarcosHidalgo2 жыл бұрын
@@StantonLuke I know I should create the grip in just one piece... but then it will not fit my 10x10x10cm fdm printer XD that's the only reason it has been made in two pieces. I made the stock for my personal use, but it actually is used all around the world and one of the best cheap, quick and easy solutions out there. Even if I can get a protube (I played enough hours to Contactor$ to really made a +100$ purchase affordable on the stock) I still prefer my solution, once you get used to the free left hand, you don't want anything different (imho)
@StantonLuke2 жыл бұрын
@@MarcosHidalgo yes it’s fantastic! Do you have a link where I can ‘buy you a coffee’ Or something to say thank you!
@rodrigogonzalezcarrizo49892 жыл бұрын
Printing right Now. Thanks a lot
@welligtonmendes22142 жыл бұрын
sempre Calígula kkk
@Jaximumpower2 жыл бұрын
Keep it up! You're doing the Lord's work.
@stephenfender58952 жыл бұрын
I just resin printed your Devastator. Beautiful model.
@akm56112 жыл бұрын
That's awesome, I started like this and ended up here. I am on the third prototype at the moment. kzread.info/dash/bejne/pn95rc2GYMTYj8o.html kzread.info/dash/bejne/iZ2j0tJxntisfbw.html
@colthewol2 жыл бұрын
My quest controllers keep sliding out of the pistol grip...
@RaqHid_2 жыл бұрын
La segunda parte tan emocionante como la primera ... SI QUE ME HA GUSTADO MUCHO !!! gracias a vosotros :)
@RaqHid_2 жыл бұрын
Que chulo !!! ... Y las "voces especiales " ;P
@lecitronXR2 жыл бұрын
Awesome! Meta must buy your design and send you a yacht.
@MarcosHidalgo2 жыл бұрын
To be fair, they'll send me the STL files to print the yacht XD
@lecitronXR2 жыл бұрын
@@MarcosHidalgo XD
@akimidir84662 жыл бұрын
Best kaligulla
@welligtonmendes22142 жыл бұрын
sempre Calígula kklk
@ocprime2 жыл бұрын
I have a Beeline Moto and looking for a cheap mount for it. My cousin had a Garmin mount that looked really similar to the Beeline mount. Any recommendations? Does this mount you used work reliably?
@Ismaagonzz2 жыл бұрын
Enserio necesito q me enseñes cosas
@Schmittfeuer2 жыл бұрын
Definitely hope you end up finishing this and upload it. Looks pretty amazing already and being able to play CS like this in TTS would be great.
@lim95273 жыл бұрын
If it looked stupid but it worked, it's not stupid.
@niogos3 жыл бұрын
Puedes compartir el perfil?
@hunterwhite73823 жыл бұрын
Its easy an cheap to make one yourselfe.
@juanwick7303 жыл бұрын
How do you reload without hitting the stock?
@MarcosHidalgo3 жыл бұрын
All games have a good tolerance for the "hitbox" of the magwell... you get used to it pretty quickly. In fact, following a "normal" path for reloading rarely hits the tube
@38thpanzerdivision563 жыл бұрын
Nice work!
@mastixas3 жыл бұрын
Hello there, nice design I am definitely going to print that. My main concern is that when we are grabbing the weapon the controllers are both not aligned perfectly with the gunstock . Your left controller is a bit further to the left as we aim down sights. Is that an issue making the gun drift a little bit to the same direction when we grab it from the front? Thanks anyway
@rafa1neves3 жыл бұрын
Olá... muito bom parabéns.
@ChaseElliottBand3 жыл бұрын
But then how do you quickly throw utility?
@DemoStatic3 жыл бұрын
Left hand throw most likely , pick with left hand pull pin with right ? Small compromise? Worth a print
@fork2309 Жыл бұрын
@@DemoStatic even then, it aint really that heavy, you can still throw with your right fine.
@dnzrdm3 жыл бұрын
This is EXACTLY what I have been looking for. Makes so much sense.
Пікірлер
Hello, can you buy this kind of thing?
Where can these be purchased from?
Como conseguiu tirar a mola? abriu por onde?
You should be able to change springs easily, the X56 comes with different tensions. I was using the softer one but for helis recentering is not adecuate... so I created this.
Manda para mim no Brasil hahahah quero pilotar helis no FS2020 mas ta dificil com meu Hotas 56!!
I'm sorry but I don't print on demand... but surely you could find someone in Brazil who does :)
It Rocks lol🤣
Jajaja, magnífico Marcos, temazo
👏👏👏🤟
Temazo
Mola ❤
THANKKK
stl plz
How to throw grenade?
wow awesome work!
puedes pasar el perfil del loco ivan quiero hacer esas maniobras con solo decirlo
his magazine has fatal design flaw. the whole gas pressure inside container was hold by small yet fragile potmetal ears pivot point shown in 5:24 - 5:30 mine suddenly explode out of the blue when stored with gas inside. upon inspection, the ears pivot point was failed to contain gas pressure, and the whole top part of magazine were shot upward at high velocity. it is shameful that this good quality external material of magazine, made by renowned manufacturer, but has such a fatal design flaw that could easily identified
cool!
what is the name of the game?
Garmin Edge mount
honestly looks like more effort than its worth to use lol might give it a try if get time
I've been using pretty much the same design since Oculus Go, then Q1, now Q2... it is an effortless printing and it increases game inmersion by 500%
Jack Black?
Esto está GUAPÍSIMO.
Hello, what is your other hardware and graphics settings, can you share please?
Where can I get this mod?
I didn't finished it, the player sheets are almost complete, I was preparing the "plane creation" that presets armor and weapons, and the payload... but I found some bugs in TTS that made me lose a bit of push in this project... and I've to prepare the 3D models for the planes (using my 3D models available at Cults and Thingiverse). So, it is still a work in progress, I've to go back to it at some point but right now it isn't playable, nor ready to release even in Alpha stage
@@MarcosHidalgo I need this in my life.
You're my new best friend!
This is awesome! I didn't even know you could use VR like this.
Is the right hand controller seat glued onto the rail?! I have printed it and it’s obviously free of the handle? Do I glue it? The reason I ask is that you can do it without but the grip is nice as a side are piece too.
Hi there! yes! glue it!! the idea is to have the right controller (dominant hand) attached to the "tube" and have the reloading hand free to throw grenades, reload or whatever action you need... It is a different concept from the double magnet stocks, but for me it works fast, it's simple and sturdy, and helps you to get a good muscle memory for your weapon, even when you have to shoot one handed. Grip is great for pistol only games like Arizona sunshine or pistol whip, I have additional grips for that sole purpose.
@@MarcosHidalgo perfect, I actually glued it last night and you are so right! It’s a great stock, I have the 15mm version printed and fits over a 16mm carbon fibre rod, I place a short piece of tubing inside before curing so it doesn’t stress it once it’s cured! It’s light and easy to use! Thanks for a great design, it prints so well on a resin printer.
@@StantonLuke I know I should create the grip in just one piece... but then it will not fit my 10x10x10cm fdm printer XD that's the only reason it has been made in two pieces. I made the stock for my personal use, but it actually is used all around the world and one of the best cheap, quick and easy solutions out there. Even if I can get a protube (I played enough hours to Contactor$ to really made a +100$ purchase affordable on the stock) I still prefer my solution, once you get used to the free left hand, you don't want anything different (imho)
@@MarcosHidalgo yes it’s fantastic! Do you have a link where I can ‘buy you a coffee’ Or something to say thank you!
Printing right Now. Thanks a lot
sempre Calígula kkk
Keep it up! You're doing the Lord's work.
I just resin printed your Devastator. Beautiful model.
That's awesome, I started like this and ended up here. I am on the third prototype at the moment. kzread.info/dash/bejne/pn95rc2GYMTYj8o.html kzread.info/dash/bejne/iZ2j0tJxntisfbw.html
My quest controllers keep sliding out of the pistol grip...
La segunda parte tan emocionante como la primera ... SI QUE ME HA GUSTADO MUCHO !!! gracias a vosotros :)
Que chulo !!! ... Y las "voces especiales " ;P
Awesome! Meta must buy your design and send you a yacht.
To be fair, they'll send me the STL files to print the yacht XD
@@MarcosHidalgo XD
Best kaligulla
sempre Calígula kklk
I have a Beeline Moto and looking for a cheap mount for it. My cousin had a Garmin mount that looked really similar to the Beeline mount. Any recommendations? Does this mount you used work reliably?
Enserio necesito q me enseñes cosas
Definitely hope you end up finishing this and upload it. Looks pretty amazing already and being able to play CS like this in TTS would be great.
If it looked stupid but it worked, it's not stupid.
Puedes compartir el perfil?
Its easy an cheap to make one yourselfe.
How do you reload without hitting the stock?
All games have a good tolerance for the "hitbox" of the magwell... you get used to it pretty quickly. In fact, following a "normal" path for reloading rarely hits the tube
Nice work!
Hello there, nice design I am definitely going to print that. My main concern is that when we are grabbing the weapon the controllers are both not aligned perfectly with the gunstock . Your left controller is a bit further to the left as we aim down sights. Is that an issue making the gun drift a little bit to the same direction when we grab it from the front? Thanks anyway
Olá... muito bom parabéns.
But then how do you quickly throw utility?
Left hand throw most likely , pick with left hand pull pin with right ? Small compromise? Worth a print
@@DemoStatic even then, it aint really that heavy, you can still throw with your right fine.
This is EXACTLY what I have been looking for. Makes so much sense.
looks useful