man i only have a stick welder, can a stick weld look as good as this?
@Reminderhamid26 күн бұрын
How much money
@SaleenJ27 күн бұрын
Interesting I would have thought the weld overlap would have structural purposes...
@Flightdevildoc27 күн бұрын
Thank you so much for such excellent video. I just got today my first angle grinder from HF and despite seeing 7-8 videos, NONE of them explained as clear as you did on how to attach the different disks, paying attention to the flange nut orientation plus emphasizing on safety at the same time. Awesome. These prior KZreadrs should learn from you on how to make an excellent set up video. Just subscribed. Bravo Zulu!🙂
@cuppadanАй бұрын
Instruction was clear as glass. Thank you.
@mikeoswald15Ай бұрын
Clamp a piece of brass flat stock, like 1/2 × 1 1/2 on backside, and weld with a little more penetration. It will remain smooth on backside.
@user-ik4ey4eg3lАй бұрын
Thank you, for excellent, clear, simple, display & explanation.
@vrod1aАй бұрын
Very helpful tips 👍
@Rabiiid2 ай бұрын
The first thing imma use my angle grinder for is to cut my cars aftermarket plastic sideskirts shorter. I bought a metal cutting wheel... I think it might have been overkill but i might need it in the future. Wish I had a garage. Really sucks to be doing projects in my apt living room. But anyways thanks for the info
@bloggerpartner78383 ай бұрын
what about the inside of the angle iron? how do grind the inside part?
@francisarledge99813 ай бұрын
Ever used a belt sander?
@newry1234 ай бұрын
What do u call that first disc u used
@Fordandra6 ай бұрын
Super helpful, exactly what I needed! I was having a loosely spinning blade, turns out the dimpled nut was facing the wrong direction. Thank you for the help!
@davisseegmiller30436 ай бұрын
Hi Rob. I am a university student attempting to build a sofa with a steel pipe frame. My university has one of these machines (Hossfeld Universal Bender) but no one seems to know how to use it, it’s been around so long. Would you be available to possibly do a video call with me and give me a tutorial on how to use it specifically for my needs? It would be greatly appreciated.
@ypaulbrown6 ай бұрын
wonderful,
@Foreverandever7896 ай бұрын
JESUS SAVES SINNERS PROJECT Luke 23:42-43 kjv " A prayer to go to HEAVEN " >>> LORD I am a sinner and I believe that JESUS died on the cross for mys sins. Buried afterwards, then rose from the dead. Read Romans 10:9-11 in your Bible Time is running out ! Read John 3:36 kjv
@jordanjpl61007 ай бұрын
yeah thanks man, i was worried putting that in unthreaded grinder on cause the nut just wasn’t secure enough for my comfort
@ISO07ISO7 ай бұрын
takımlarına bayıldım. çok profesyonelce düşünülüp tasarlanmış. abonen oldum ve seni takip edeceğim.👋👋👋
@muluhedwinedwin35558 ай бұрын
How to grind round tables
@user-hm5bs5fb4i8 ай бұрын
Excellent video. I have one thin wavy/fragile looking circle piece you did not address. Any clue as to what that is? I have never used a grinder. Just using it to polish with 4” felt polishing wheels.
@sirmaxwellvonfleckenstein53769 ай бұрын
Thanks man. I have some cutting to do on a flat bar with type 27 and I plan to go full MAGA on the bar with my Dewalt D28402 and type 27 disc.
@reviveexteriorhomecare39899 ай бұрын
Thank you huge help
@Sparky-pk6fh9 ай бұрын
Great vid
@taylorjohansen495510 ай бұрын
Hi Rob! Thanks for the amazing educational videos. How did you source or create that large manual?
@robdamico530410 ай бұрын
Hey Taylor, The manual came with the machine. One of the past school technicians put together the binder and added to two colorized pages on the angle Iron flange out instructions. If you own a Hossfeld, I would call them up and see if they'll send you a copy. The official one is printed on sturdy stock and has good clear illustrations and images. Otherwise I have an OK scan I might be able to e-mail but the images are a bit blown out.
@Larry-rz4ed10 ай бұрын
Brother I start a grinding job on Monday, I don't want to fail, wish me luck 🙏
@TolaTrucking10 ай бұрын
Didn't he put the cutting disc on the wrong way? at 7:00
@oscararrisola691410 ай бұрын
Can this bender do heel up as well?
@jowelalmamun129911 ай бұрын
whate is the price I need
@johnnybahngload167311 ай бұрын
I had a lot of old pipes and rebar to cut up and from what I read kzread.infoUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
@jrjline111 ай бұрын
Exactly what a first time user is looking for. Thank you
@Xenixish Жыл бұрын
Why go to all this effort when it's going to get painted to prevent rust anyway?
@7arsenal Жыл бұрын
I wish I would’ve showed my welder this video before he made my driveway door. 😢
@gb1178 Жыл бұрын
Thank you!
@ivanleon250 Жыл бұрын
How much more infor
@michaelpepper885 Жыл бұрын
Reeeeespect. Straight to the point and thorough. 🙏 answered all my thoughts and concerns
@christopherpatrick2343 Жыл бұрын
Great 👍
@toolthoughts Жыл бұрын
If you have a good hard and wear resistant stone on a die grinder and a light touch, you can do tight spots, and it won't be too chewed up - might not even need a sanding pass if it's fine enough a stone
@PITU-f7f Жыл бұрын
best video on the subject.
@nandansharma762 Жыл бұрын
Nice
@ryanjade2836 Жыл бұрын
Great video. Thanks!!!
@montoyousjohnson4791 Жыл бұрын
Just asking have you ever used blue buffing pad reason I ask that what we use where I work
@jaredhicks6152 Жыл бұрын
This video is exactly what I needed man thank you
@rexrexford5249 Жыл бұрын
Excellent presentation with valuable information for inexperienced grinding wheel opertors like myself. This was very helpful and probably prevented me from injuring myself or others. Many thanks!
@jimgriffin4063 Жыл бұрын
Thanks Rob, great explanation
@mukeshpanchal625 Жыл бұрын
The welding are weak after griding 😊😁
@marvinbalabat8100 Жыл бұрын
Nice explanation
@99Vidsxx Жыл бұрын
Do you drag or pull when you weld?
@jimmywilson1388 Жыл бұрын
Thanks for the video. So is it acceptable if the sanding dick comes out closer to the edge of the guard?
@Jaxclay000 Жыл бұрын
Just to let yall know I'm the one who's been stealing the grinder nuts❤
@radoballfc2038 Жыл бұрын
I bought a cutting wheel and it came with 2 washers. Not sure if I need them, they seem redundant as the wheel size fits snug with the size of my arbor. Any thoughts ?
@robdamico5304 Жыл бұрын
They might be spacers to fit different size arbors than yours. The inner rim of the wheel should fit a feature on your arbor nut or the existing spacer that came with the grinder. It shouldn't ride directly on the threads of the arbor. If it fits snug and runs without vibration, you are probably good to go. Just be sure to wear your safety gear. I always wear a face shield when using a cutoff wheel on a grinder. They have a tendency to shatter if you run them wrong, so keep that guard on and stay safe!
@radoballfc2038 Жыл бұрын
@@robdamico5304 Thanks for your prompt response. You're helping us all out a great deal !
Пікірлер
man i only have a stick welder, can a stick weld look as good as this?
How much money
Interesting I would have thought the weld overlap would have structural purposes...
Thank you so much for such excellent video. I just got today my first angle grinder from HF and despite seeing 7-8 videos, NONE of them explained as clear as you did on how to attach the different disks, paying attention to the flange nut orientation plus emphasizing on safety at the same time. Awesome. These prior KZreadrs should learn from you on how to make an excellent set up video. Just subscribed. Bravo Zulu!🙂
Instruction was clear as glass. Thank you.
Clamp a piece of brass flat stock, like 1/2 × 1 1/2 on backside, and weld with a little more penetration. It will remain smooth on backside.
Thank you, for excellent, clear, simple, display & explanation.
Very helpful tips 👍
The first thing imma use my angle grinder for is to cut my cars aftermarket plastic sideskirts shorter. I bought a metal cutting wheel... I think it might have been overkill but i might need it in the future. Wish I had a garage. Really sucks to be doing projects in my apt living room. But anyways thanks for the info
what about the inside of the angle iron? how do grind the inside part?
Ever used a belt sander?
What do u call that first disc u used
Super helpful, exactly what I needed! I was having a loosely spinning blade, turns out the dimpled nut was facing the wrong direction. Thank you for the help!
Hi Rob. I am a university student attempting to build a sofa with a steel pipe frame. My university has one of these machines (Hossfeld Universal Bender) but no one seems to know how to use it, it’s been around so long. Would you be available to possibly do a video call with me and give me a tutorial on how to use it specifically for my needs? It would be greatly appreciated.
wonderful,
JESUS SAVES SINNERS PROJECT Luke 23:42-43 kjv " A prayer to go to HEAVEN " >>> LORD I am a sinner and I believe that JESUS died on the cross for mys sins. Buried afterwards, then rose from the dead. Read Romans 10:9-11 in your Bible Time is running out ! Read John 3:36 kjv
yeah thanks man, i was worried putting that in unthreaded grinder on cause the nut just wasn’t secure enough for my comfort
takımlarına bayıldım. çok profesyonelce düşünülüp tasarlanmış. abonen oldum ve seni takip edeceğim.👋👋👋
How to grind round tables
Excellent video. I have one thin wavy/fragile looking circle piece you did not address. Any clue as to what that is? I have never used a grinder. Just using it to polish with 4” felt polishing wheels.
Thanks man. I have some cutting to do on a flat bar with type 27 and I plan to go full MAGA on the bar with my Dewalt D28402 and type 27 disc.
Thank you huge help
Great vid
Hi Rob! Thanks for the amazing educational videos. How did you source or create that large manual?
Hey Taylor, The manual came with the machine. One of the past school technicians put together the binder and added to two colorized pages on the angle Iron flange out instructions. If you own a Hossfeld, I would call them up and see if they'll send you a copy. The official one is printed on sturdy stock and has good clear illustrations and images. Otherwise I have an OK scan I might be able to e-mail but the images are a bit blown out.
Brother I start a grinding job on Monday, I don't want to fail, wish me luck 🙏
Didn't he put the cutting disc on the wrong way? at 7:00
Can this bender do heel up as well?
whate is the price I need
I had a lot of old pipes and rebar to cut up and from what I read kzread.infoUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
Exactly what a first time user is looking for. Thank you
Why go to all this effort when it's going to get painted to prevent rust anyway?
I wish I would’ve showed my welder this video before he made my driveway door. 😢
Thank you!
How much more infor
Reeeeespect. Straight to the point and thorough. 🙏 answered all my thoughts and concerns
Great 👍
If you have a good hard and wear resistant stone on a die grinder and a light touch, you can do tight spots, and it won't be too chewed up - might not even need a sanding pass if it's fine enough a stone
best video on the subject.
Nice
Great video. Thanks!!!
Just asking have you ever used blue buffing pad reason I ask that what we use where I work
This video is exactly what I needed man thank you
Excellent presentation with valuable information for inexperienced grinding wheel opertors like myself. This was very helpful and probably prevented me from injuring myself or others. Many thanks!
Thanks Rob, great explanation
The welding are weak after griding 😊😁
Nice explanation
Do you drag or pull when you weld?
Thanks for the video. So is it acceptable if the sanding dick comes out closer to the edge of the guard?
Just to let yall know I'm the one who's been stealing the grinder nuts❤
I bought a cutting wheel and it came with 2 washers. Not sure if I need them, they seem redundant as the wheel size fits snug with the size of my arbor. Any thoughts ?
They might be spacers to fit different size arbors than yours. The inner rim of the wheel should fit a feature on your arbor nut or the existing spacer that came with the grinder. It shouldn't ride directly on the threads of the arbor. If it fits snug and runs without vibration, you are probably good to go. Just be sure to wear your safety gear. I always wear a face shield when using a cutoff wheel on a grinder. They have a tendency to shatter if you run them wrong, so keep that guard on and stay safe!
@@robdamico5304 Thanks for your prompt response. You're helping us all out a great deal !