Пікірлер

• 
  @randybarlow95872 сағат бұрын

  Definitely brought out the tan color. Great job Mr. Cliff

• 
  @mikewolfe95418 сағат бұрын

  Love you videos. They have taught me a lot and thank you. Just curious I watched a video of your about two years ago and you were using gutter bags. Are you still doing that today for soft wash

• 
  @PinkFlamingoPowerWash12 сағат бұрын

  Yes sir I do. I still got the same roll lol. The link for them is in the description of each video

• 
  @roman083523 сағат бұрын

  Looking clean 👌 stay hydrated

• 
  @PinkFlamingoPowerWash23 сағат бұрын

  Thank you, I will

• 
  @LeagueofBasicsКүн бұрын

  M5 AND DAVIS SHOOTER TIP -BIG UPGRADE. Glad to see you using that now instead of a jrod lol, good work Cliff!

• 
  @PinkFlamingoPowerWash23 сағат бұрын

  Not really a big upgrade. I've had it for a while and I've used it here and there. That m5 don't have the power of a jet wash nozzle to get stubborn stains or wasp nest from far away. I've always had the Davis shooter tip though that's a must

• 
  @angela9965Күн бұрын

  When resanding is polymeric sand better than silica sand for durability. Also do you need a compactor once you sweep in the sand to the joints.

• 
  @PinkFlamingoPowerWashКүн бұрын

  not necessarily better. If you have shifting loose paver then yea probably so. nope no compactor , just the way i show it in the video. They probably compact it when they pavers are installed.

• 
  @angela9965Күн бұрын

  ​@PinkFlamingoPowerWash thanks for quick reply. They didnt compact the pavers after installed. They just compacted the crushed stone before they put down the pavers.

• 
  @PinkFlamingoPowerWashКүн бұрын

  @@angela9965 oh no that's kinda off

• 
  @angela996523 сағат бұрын

  ​@PinkFlamingoPowerWash that might be the reason why the sand and seal has failed. After they installed the pavers they waited about a month after to seal them which was about 3 years ago. since then I had paid another co to sand and seal which was about 2 years ago. Now I need to fix some sunken in areas and then sand and seal again. But it sounds like I am going to have to sand then compact then sand again if needed then seal. For sealer I have foundation armor ar500 high gloss sealer which is solvent based hoping to get better quality and longevity

• 
  @PinkFlamingoPowerWash23 сағат бұрын

  @angela9965 what state are you in? Solvent based isn't the best for where I am. Which is Florida

• 
  @davidryba3303Күн бұрын

  Good job brother

• 
  @PinkFlamingoPowerWashКүн бұрын

  Thank you so much 😀

• 
  @tomalley798Күн бұрын

  I reckon you should invest in rubber flamingos with pink flamingo power wash advertised on it and throw it in every pool or house you clean

• 
  @PinkFlamingoPowerWashКүн бұрын

  lol it would be totally hard to see. My friend has tennis shoes with his business name on it. any print on boots even the ones i wear gets bleached out.

• 
  @deoriginooКүн бұрын

  Good Work Deco Should Be Sponsoring You Bro 💯

• 
  @PinkFlamingoPowerWashКүн бұрын

  Lol thanks

• 
  @philliphall5198Күн бұрын

  That roof needs to be sealed asap 😢

• 
  @PinkFlamingoPowerWashКүн бұрын

  hahaha they do sell that kind of product.

• 
  @philliphall5198Күн бұрын

  Is this a common practice in your area ???😮

• 
  @PinkFlamingoPowerWashКүн бұрын

  For mobile homes to be that dirty ? Lol idk probably

• 
  @philliphall5198Күн бұрын

  What type of soap did it take ? Did you use any vinegar ??

• 
  @PinkFlamingoPowerWashКүн бұрын

  No we use chlorine not vinegar

• 
  @BB-nw5mtКүн бұрын

  Great work bro!!! Quick question, when you pick your sealer , how do you choose? Are you choosing based on price or quality?

• 
  @PinkFlamingoPowerWashКүн бұрын

  Definitely quality. it will all be reflected on your quote anyway.

• 
  @wewashmilitarygradestreams8314Күн бұрын

  My Dawg 💪🏾

• 
  @PinkFlamingoPowerWashКүн бұрын

  Eddie my bro!

• 
  @user-iq4ze3rr2tКүн бұрын

  Do you leave the blue tape down? I have been taking mine up because I’m scared it might come up easy later

• 
  @PinkFlamingoPowerWashКүн бұрын

  It comes up easy actually. If it's easy to remove it without having to spray the drain on the 2nd coat then I remove it.

• 
  @Chilltown13Күн бұрын

  Walking on sealed pavers in between coats doesn't leave foot print marks?

• 
  @PinkFlamingoPowerWashКүн бұрын

  Nope. Doesn't we work that way. Of course If they're wet but after 30-40 mins they're not wet anymore

• 
  @BigSwoleMusickКүн бұрын

  Did anyone notice the pink flamingo in the pool 😅

• 
  @PinkFlamingoPowerWashКүн бұрын

  Lol good catch 👌 😆

• 
  @BigSwoleMusickКүн бұрын

  @PinkFlamingoPowerWash awesome!!! hey man, I got a few questions pertaining to business or a possible consult. How can I reach you? By calling the business number?

• 
  @PinkFlamingoPowerWashКүн бұрын

  @BigSwoleMusick I'm always on the go. Email me [email protected] and we can't discuss it more.

• 
  @BigSwoleMusickКүн бұрын

  @@PinkFlamingoPowerWash yessir

• 
  @darnellratcliff14822 күн бұрын

  Let's Go! Get that 💰 Cliff 🫵🏿🙏🏿

• 
  @PinkFlamingoPowerWashКүн бұрын

  my bro thanks.

• 
  @seanduenas86842 күн бұрын

  What tip are are using do you have a link. Thank you

• 
  @PinkFlamingoPowerWash2 күн бұрын

  On my 12v wand? A 2540 and 0040.

• 
  @sniffy452 күн бұрын

  So do you get any callbacks on jobs like this? I did a roof with no gutters and did not rinse the roof. It rained day after like really hard. All the SH washed off the roof hitting the grass and turned grass yellow as I would expect it to do. How do you combat this?

• 
  @PinkFlamingoPowerWash2 күн бұрын

  I haven't yet had a that issue and I don't rinse roofs unless it's a metal roof

• 
  @stanschaefer90102 күн бұрын

  Does this acid still etch concrete?

• 
  @PinkFlamingoPowerWash2 күн бұрын

  Nah

• 
  @claytonc.72613 күн бұрын

  Great work.

• 
  @PinkFlamingoPowerWash2 күн бұрын

  Thank you! Cheers!

• 
  @jerrymeyers20754 күн бұрын

  I'm surprised you don't use an M5 Twist, is there a reason for that or is it because most of the house washes you do are single story?

• 
  @PinkFlamingoPowerWash4 күн бұрын

  I have one for both of my pressure washers. I got a few different guns, nozzles and ways to wash. All are effective. Thr m5 doesn't have a jet wash nozzle power for knocking off certain things. That's why I use the jrod on certain jobs.

• 
  @richardlassiter53384 күн бұрын

  What were prices for goth roofs? You did a great job bro✊🏾

• 
  @PinkFlamingoPowerWash4 күн бұрын

  I dont advertise my business prices on KZread anymore. Sorry

• 
  @richardlassiter53383 күн бұрын

  @@PinkFlamingoPowerWash Yea I figured that too since I watched almost all your videos. Lol You have great videos & advice you taught me a lot in this field. Thank You man!

• 
  @markmitchell6085 күн бұрын

  Thanks

• 
  @PinkFlamingoPowerWash5 күн бұрын

  No problem

• 
  @venomshowcars5 күн бұрын

  I need to learn to wet seal what all do I need or just do this process?

• 
  @PinkFlamingoPowerWash5 күн бұрын

  I got 35+ videos including this one that you can follow.

• 
  @venomshowcars5 күн бұрын

  didn't know you seal this is wet seal right? can you show me the steps?

• 
  @PinkFlamingoPowerWash5 күн бұрын

  It's on the other video you commented on

• 
  @seanduenas86845 күн бұрын

  What percentage of SH you mixed

• 
  @PinkFlamingoPowerWash5 күн бұрын

  6% mix for roofs

• 
  @spydawebb78016 күн бұрын

  How much did you charge for that? And what soap did you use?

• 
  @PinkFlamingoPowerWash5 күн бұрын

  I dont put my business prices on KZread anymore. But I used slo mo surfactant in my sh mix

• 
  @spydawebb78015 күн бұрын

  @@PinkFlamingoPowerWash Thanks

• 
  @I5ZQ86 күн бұрын

  Nothing better than when someone stops and asks for a card. Especially when your like half way done and they see the difference, like you don't even have to sell it they can just see what you do.

• 
  @PinkFlamingoPowerWash3 күн бұрын

  💯 correct. I love it.

• 
  @BamBam-iq8uo2 күн бұрын

  Thats a fact. I Do commercial work for 11 krystal food chains and the customers come thru and order food and stop me to ask for a card and Do you do Homes and driveways.? Of course.🤜🏾💪🏾🤣🤣🤣

• 
  @aroundthebendpressurewashing6 күн бұрын

  The first 2 weeks of July slowed down for me in North Florida, and the last week has been slammed. Riding the Home Service Roller-coaster. Stay safe out there brother, it is HOT!!!

• 
  @PinkFlamingoPowerWash6 күн бұрын

  Keep pushing my bro. Yes it's super hot!!!

• 
  @tomalley7986 күн бұрын

  Enjoy your break 🎉

• 
  @PinkFlamingoPowerWash6 күн бұрын

  Thanks Tom!

• 
  @chrislats88916 күн бұрын

  Nice

• 
  @PinkFlamingoPowerWash6 күн бұрын

  Thanks

• 
  @TheFreshRinse6 күн бұрын

  Love it! Tight!

• 
  @tomalley7986 күн бұрын

  Don’t we all😁

• 
  @PinkFlamingoPowerWash6 күн бұрын

  Appreciate it!

• 
  @cookiecollins81796 күн бұрын

  Great work!!

• 
  @PinkFlamingoPowerWash6 күн бұрын

  Thanks a lot!

• 
  @kenny1man6 күн бұрын

  Great job Cliff….I have a Mini-Mondo with a 10 GPM setup. What tips are you using on your Mini-Mondo and what is the pressure setting on your 12 GPM please?

• 
  @PinkFlamingoPowerWash6 күн бұрын

  I'm running 4 25030 nozzles. I believe it's at 2800 psi

• 
  @kenny1man6 күн бұрын

  @@PinkFlamingoPowerWash Cliff Thanks for the information. I’m also running 2800 psi with 4 25030 nozzles and it seems the pressure is excessively high. I have had problems removing the top cream layer from the concrete, even old concrete which is not good. Have you ever had that problem? Any suggestions or advice you can give to prevent this would be much appreciated.

• 
  @PinkFlamingoPowerWash6 күн бұрын

  @@kenny1man never had that issue. But you can go up in nozzle sizes. Maybe some 25035s

• 
  @kenny1man6 күн бұрын

  @@PinkFlamingoPowerWash Thanks for the advice….I just ordered some 3.5 and 4.0 nozzles to test. Thanks again.

• 
  @PinkFlamingoPowerWash6 күн бұрын

  @@kenny1man no problem

• 
  @Travisg56 күн бұрын

  Do u tape up ring cameras

• 
  @PinkFlamingoPowerWash6 күн бұрын

  Nah I don't. And never had problems

• 
  @Travisg56 күн бұрын

  @@PinkFlamingoPowerWash ok what about sercuirity cameras

• 
  @Travisg57 күн бұрын

  I need one of those in my life

• 
  @PinkFlamingoPowerWash6 күн бұрын

  They're a beast

• 
  @Luiseo17 күн бұрын

  Man that mini Mondo is beatsmode!

• 
  @PinkFlamingoPowerWash6 күн бұрын

  Yea with the 12gpm or even 10gpm for sure

• 
  @randybarlow95877 күн бұрын

  Man that didnt take no time. Nothing wrong with doing a little extra that goes a long way. Great job Cliff

• 
  @PinkFlamingoPowerWash6 күн бұрын

  You got that right!

• 
  @claudiomoreiraamendocrem14787 күн бұрын

  Hey Cliff, nice content 👌🏽. I have a question, What type of pump do you use to apply the post-treat?

• 
  @PinkFlamingoPowerWash6 күн бұрын

  12v pump. Mine is a 12v delevan 100psi 7gpm pump

• 
  @claudiomoreiraamendocrem14785 күн бұрын

  @PinkFlamingoPowerWash That's good 👍🏼. Thanks bro 👊🏽

• 
  @phsx28907 күн бұрын

  I am not a pro but it doesn’t seem like it’s enough sand

• 
  @PinkFlamingoPowerWash7 күн бұрын

  It's not supposed to be filled to the top. (Coming from a pro)

• 
  @MikeWho_MikeJones7 күн бұрын

  Mini Mondo Is A Game Changer 🦩🔥

• 
  @PinkFlamingoPowerWash6 күн бұрын

  Heck yea it is

• 
  @Anthonysni927 күн бұрын

  Will you be at The Huge convention?

• 
  @PinkFlamingoPowerWash7 күн бұрын

  Nah I don't even keep up with those things honestly.

• 
  @boogiegirl42767 күн бұрын

  Hey, brutha!! I am riding with you. I am a new subscriber, and I give a thumbs up. I am learning so much from you. Thanks for all you share. 😊😊😊

• 
  @PinkFlamingoPowerWash7 күн бұрын

  Welcome aboard! Thanks a lot

• 
  @ronaldhall10977 күн бұрын

  Yes sir Big Cliff...awesome content once again!!!

• 
  @PinkFlamingoPowerWash7 күн бұрын

  Thanks again!

• 
  @ogcryptogodzilla187 күн бұрын

  Great Job Cliff as always ! I have been washing for about 4 months now. Can you give me an idea on what your uncharge would be for gutter cleaning for a 2000 SF house - ballpark? I have no idea what to charge.

• 
  @PinkFlamingoPowerWash7 күн бұрын

  The prices fluctuates so much accross the nation it's hard to say. By talking to other ppl I've heard $1-2 a linear ft for 1 story and $3-4 for 2 stories

• 
  @rubenkjbr7 күн бұрын

  NICE work ! Pink Flamingo! 👍👍

• 
  @PinkFlamingoPowerWash7 күн бұрын

  Thanks! 😊

• 
  @tomalley7987 күн бұрын

  Your selection of sound is class.

• 
  @PinkFlamingoPowerWash7 күн бұрын

  Thanks. Love a good vibe

• 
  @darnellratcliff14827 күн бұрын

  Get that 💰 Cliff 🫵🏿

• 
  @PinkFlamingoPowerWash7 күн бұрын

  🙏🏽🙌

• 
  @nathanielholsey46807 күн бұрын

  How do you price pool cage jobs from small to large thanks

• 
  @PinkFlamingoPowerWash7 күн бұрын

  The ones on the video are medium size. A large one are the tall 2 story cages.