Пікірлер

• 
  @pedroclaro78228 күн бұрын

  I just got a motorcycle and a full face helmet. I use strap on my glasses so to put my helmet on I have to take off the straps, the glasses, put on helmet and then shimmy the glasses into the helmet, and vice versa. So annoying! Just a couple days and I’m tired of that already. Decided to look for flip up helmets and glasses on KZread to see if anything popped up, and lo and behold, this brilliance comes ip

• 
  @warlockboyburnsАй бұрын

  It's nice to have a the front brake almost as as powerful as the back now. I think I might need 220mm to be equal.

• 
  @bikefzx2132Ай бұрын

  Braking really hard on the front makes the rear useless. It might be too much.

• 
  @gimeoden83092 ай бұрын

  I use a stainless steel screw type hose clamp for years

• 
  @sarafuller26392 ай бұрын

  How does the reinstallation go?Once you put it back in, can you tell that it was ever removed?

• 
  @YouGotThisDIY2 ай бұрын

  Good stuff 👍

• 
  @willywgb3 ай бұрын

  So what part of the ninety degrees bent section should line up with the zero line of the ruler? The top edge of the spoke, the middle of the spoke or the bottom edge of the spoke?

• 
  @willywgb3 ай бұрын

  Thanks for making this video on making your own spoke ruler.

• 
  @kiwiingenuity16774 ай бұрын

  What about the cramp busters , are they made by bark busters? How did you like them ?

• 
  @AJ-ri5ee5 ай бұрын

  Why have I been riding for a year with broke spokes when this video exists😂

• 
  @hacunamatata68025 ай бұрын

  As others have noted: Short,, To-the-Point, Helpful !! Thanks!

• 
  @EstarEnt5 ай бұрын

  Is the conversion kit still available?

• 
  @victorortiz29427 ай бұрын

  Hermoso relato de nuestra cultura muy rica, gracias por este material y me gustaria de conocerlo personalmente para intercambiar conocimiento y aprendizaje!

• 
  @juliansandoval27527 ай бұрын

  I'd like to know how to take out the right side.

• 
  @MrHandy-nr5hi7 ай бұрын

  Not all heroes wear capes

• 
  @scottzreality30618 ай бұрын

  Great narration 👍

• 
  @ozzie4448 ай бұрын

  Not a bad idea but a spoke is always measured without the nipple on it.

• 
  @tilleylepew59449 ай бұрын

  We used to do overniters where Girty run fed into the Allegheny. Good to see that trail before it became homeless encampments.

• 
  @tuckersautter18329 ай бұрын

  I have the 81, ol gal is full of electrical issues and was searching for help can ride for hours then suddenly that evening or the next afternoon it loses spark and im stranded

• 
  @sebas89franco10 ай бұрын

  Minuto 5:05 es la cuadra de mi casa, ahí el bus le pasó encima a una señora porque no giro despacio

• 
  @user-th9du8xf8t11 ай бұрын

  Can you get load stops for this rack?

• 
  @cubanassasinmma1648 Жыл бұрын

  0:27 & 1:06 203mm front and rear is the way to go cus its the best performance, idk where you get that the front should be bigger or that it looks stupid

• 
  @anterojuatco6146 Жыл бұрын

  Short , Simple and helpful...👍,..Theres another video about "HoW to measure spokes " The GUy was yapping and yapping for almost 15 minutes , and Frikin just making it sounds complicated ,..Just going around and around ,..I shit dont understand a thing ,..Your Video is no BS , right to the Poinrt . Thanks for sharing ....

• 
  @Adminstrator_xxxxxxxxxx3275 Жыл бұрын

  0:09 What is the name of the liquid you showed? How do I thicken the grease?

• 
  @sis66kk Жыл бұрын

  Que grandeeee

• 
  @gypsyjessye Жыл бұрын

  Good review, thanks!

• 
  @BillySBC Жыл бұрын

  Nice concept. I have a Suzuki DR650 that I ordered the Seat Concepts seat cover and foam for and the foam is rock hard... I don't think your butt goes numb from the sides of edges or the seat being too hard it's the middle where your tailbone rides that gets you after a while. I think I'll try your concept and see if it improves things. Thanks for the video.

• 
  @steweymacaroon7815 Жыл бұрын

  Lower your saddle and the numbness will disappear

• 
  @terremoto..6809 Жыл бұрын

  Paraguay is my retirement heaven

• 
  @YouTubesucksdix Жыл бұрын

  What a tough little engine.

• 
  @DavidGonzalez-tc2gz Жыл бұрын

  Hello there say I was looking for a review on the kenton 150 funny thing didn't aspect some one from the USA but any how I'm thinking about buying one here in Asuncion..

• 
  @shadowban481 Жыл бұрын

  It will be interesting to hear the details about the accident, what I saw is that you travelled back to take care of the injury?. It looks very tempting to go and live in Paraguay for as long as they allowed and tour in a cheap bike, but having an accident and getting medical help maybe not worth it. I enjoyed very much your tour narrative, thx.

• 
  @zambranofermin1990 Жыл бұрын

  jajajajajajajajaja

• 
  @mathguy829 Жыл бұрын

  Great idea! Any problems with grease reacting to the plastic?

• 
  @twintyara63304 ай бұрын

  Metal siringes, those to apply medicine to cows

• 
  @viljamrasmussen9003 Жыл бұрын

  So much like u i also bought 203 mm rotor and corresponding bracket to replace my 160 mm rotor in the front. But now im hesitating to do the install bc the internet is telling me its a really bad idea to do with QR skewer front wheel as the wheel will get ripped out of the drop outs bc of the increased leverage. another thing is that the fork itself might get ripped apart where the IS mounts are, unless the fork is rated for a 203mm disc, which my fork is certainly not (cheap bike). my bike is heavy as it is a diy ebike with heavy motor and battery and i could really use some more breaking power. so i have 2 questions: have u noticed any wear inside the eyelets on the fork (IS mounts), where the fork is connected to the adapter/bracket? And does your QR skewer loosen up after a ruff ride wit lots of braking?

• 
  @bikefzx2132 Жыл бұрын

  It’s fine. The internet is dumb. Make sure the QR is properly installed - pros had always used QRs and never had a problem. It’s only for morons who don’t know how to properly tighten a QR.

• 
  @bikefzx2132 Жыл бұрын

  And there have been zero problems. With anything. Never ever in life has anyone had a QR “loosen up” if properly installed.

• 
  @matthew4904 Жыл бұрын

  Thanks for making this video! Huge help. I ended up not even having to remove the vertical piece of plastic and the U shaped piece came out without moving the seat around. Super easy after watching this.

• 
  @bikefzx2132 Жыл бұрын

  Thanks for watching! Glad it helped

• 
  @deltafour12122 жыл бұрын

  Love the design! Did you ever get it up and running? If you did, how fast did she go and how was the steering. Anything you would do different, if you built another one?

• 
  @speedyspeedyi2 жыл бұрын

  So I order a spoke to the lengths of the nipple? Not to the end of the thread of a spoke without a nipple on? Thanks

• 
  @leew78632 жыл бұрын

  My Kia Sedona is a 2007. Very same process. So easy a girl can do it. It is also nice to see a video where the narrator knows the difference between a nut and bolt. I see so many vids where people call a bolt a screw, and nut a bolt, and a stud a screw, and all kinds of incorrect names. Good job. I'm doing mine for camping and all I want is one seat in the back for relaxation, computer work, etc. The large seat area makes a good trunk with a lid for great storage.

• 
  @bikefzx21322 жыл бұрын

  Thanks! Now that we have 4 kids I only take out the seat for a big load of Al thing special. And yeah, it’s generally good to know what you’re talking about!

• 
  @aydenneville12952 жыл бұрын

  Can you put the negative anywhere on the tank?

• 
  @bikefzx21322 жыл бұрын

  Bare metal. Yes.

• 
  @carnificis40292 жыл бұрын

  Lit. Love you

• 
  @palma117_2 жыл бұрын

  Paraguay 🇵🇾 es único un saludo 👌🏻🇵🇾

• 
  @bikefzx21322 жыл бұрын

  Vuelvo a Paraguay en 2023!

• 
  @llewvirtue8612 жыл бұрын

  that Anode should not touch the tank

• 
  @bikefzx21322 жыл бұрын

  True

• 
  @skallatorc2 жыл бұрын

  Doing the same thing on the same bike that I use for bike polo. I generate quite a bit of heat with it being the only brake, on the front and me weighing in at 293. Cool to see what the bike looks like stock. Found mine as a frame only and gave it a new life on the Polo court.

• 
  @blown94camaroz2 жыл бұрын

  I came on to KZread to figure out an easy way to measure my spokes. After watching this video first I can now get off KZread and measure my spokes. That was the easiest 5-minute research ever in my life thank you for a great video

• 
  @dtaus8092 жыл бұрын

  Genius! Though that door thing would be something I would totally do.

• 
  @aimansyahmiaimanharyadi63862 жыл бұрын

  👍👍🏼👍🏻👍👍🏼👍🏻👍👍🏼👍🏻👍👍🏼👍🏻😁

• 
  @declanmckee11852 жыл бұрын

  Do you know how to remove all the second row seats?

• 
  @matthew4904 Жыл бұрын

  It's not nearly as easy as the back seats and was a pain to put them back in. Here's the video I followed kzread.info/dash/bejne/jKijt8GldM-xYLw.html

• 
  @declanmckee1185 Жыл бұрын

  @@matthew4904 damn thanks bro

• 
  @matthew4904 Жыл бұрын

  @@declanmckee1185 LOL I'm guessing it was too late to help you with yours. After doing the middle seats a second time I didn't run into any problems getting them back in. Last time the lever to move the seat on the rails wouldn't line up for some reason and the seat wouldn't move after setting it down.

• 
  @paulbcote2 жыл бұрын

  Thanks for creating and sharing this informative video!

• 
  @bikefzx21322 жыл бұрын

  Thanks for watching! I have three more suitcase bikes if you search my channel!

• 
  @johnsandoval3472 жыл бұрын

  Thanks... Short, Fast, No music... Just the facts Mam...

• 
  @bikefzx21322 жыл бұрын

  Not into wasting your time. Or mine. Thanks for noticing.

• 
  @Elias-gb5bb2 жыл бұрын

  Now I feel sad for using 203 front and rear :(

• 
  @bikefzx21322 жыл бұрын

  Looks cool but not exactly necessary.

• 
  @OddBallPerformance2 жыл бұрын

  I run a 203 front and rear as well to clear a motorized bike sprocket. It honestly depends on your riding style if it is good or bad. I have both linked by a single brake lever and set the rear pull just a hair behind the front and it has worked very well for me

• 
  @pabloginesalsinaozuna43722 жыл бұрын

  Muy buena tu reseña de las motos y de Paraguay en general .

• 
  @bikefzx21322 жыл бұрын

  Gracias!! Y gracias por visitar mi canal.