Пікірлер

• 
  @benstoodley24957 күн бұрын

  Great video. How do I get the array action to link to the rotation after rotation? Lets say I have inserted a block, rotated it to the correct orientation then I want to apply the array at that rotation. Hope that makes sense.

• 
  @DigitalDraftingSystems6 күн бұрын

  Thank you! When inserting a block, you can type “R” to rotate it before placing it. Then, your array will be in the same rotation. You can also edit the block and associate a Rotate Action with a Rotate Parameter, the object(s), and the other parameters associated with the array.

• 
  @kabbythedog94098 күн бұрын

  Why can’t I use the rotate tool in thumbnails ?

• 
  @kabbythedog94098 күн бұрын

  Surely this isn’t a premium feature

• 
  @DigitalDraftingSystems8 күн бұрын

  If a PDF has been digitally signed with “Document Certification”, its pages can’t be rotated. Also, some PDFs have security permissions that restrict “assembling” the document. This can be confirmed by selecting the “Document” drop-down and selecting “Security”. Exporting the document’s pages could create a new copy without security permissions.

• 
  @user-mz3lt2gc8q8 күн бұрын

  Hi Ari, my 1st question is that how to change the unit column in Legend into sq ft, i.e. if you measure the wall in lineal length in ft, added wall height in ft, then if you toggle the wall area column, the legend only shows area quantity without the unit in sq ft. Could I change unit to sq ft in the unit column? It is somewhat misleading because the wall height could vary, and lineal measurement of wall may not be accurate enough. 2. I noticed your last column is in $, since I can't see your markup list in this video, is it a custom column where you had unit rate in $? Thank you!

• 
  @DigitalDraftingSystems8 күн бұрын

  The unit column’s data can only be changed if the markup’s units are changed. This can be done by selecting the markup, selecting the Measurements panel (It looks like a ruler), and changing the “Area” (Or whichever measurement’s unit you need to change) to something else. The Legend will automatically update with new unit info. We created Custom Columns for Quantity Takeoffs and Cost Analysis. We added these custom columns to our Legend, and they were initially created in the Markups List. Here’s a tutorial that demonstrates how we created them: kzread.info/dash/bejne/ZZ9klduEfby9gKg.htmlsi=PxTrSgPWqjjKKdXr

• 
  @user-mz3lt2gc8q7 күн бұрын

  @@DigitalDraftingSystems The column unit in my markup list is in line with my measurement which is Polylength, I have the correct Area unit in sf, since I set the depth manually, the depth times the lineal measure gives me area in sf., but the unit column is the unit of Polylength, which is set to be ft. I have the correct units in comments column, it's not the issue of unit conversion, it is not having the final wall are unit in my legend, it only gives your default Polylength unit which you set in under the 'ruler' icon to be ft or m. Unlike measuring a floor area, if I use area measurement in plan-view, it gives area unit, which is what we want. I didn't use elevation view to do my markups for wall area, I use line measurement in plan-view for wall first and add wall height, but unit should be sq in, sf, sq cm, sq mm, ac, ha, etc. What I'd like to see is having an area unit in the legend area under unit column if I started with length unit by Polylength measurement. If I want to know the volume for concrete foundation, I will start with area measurement, maybe in sf, then add the depth in ft, Bluebeam works out the volume, but the unit column is sf, but I'd like to see cubic ft, is there any way to achieve that, thank you!

• 
  @DigitalDraftingSystems5 күн бұрын

  @@user-mz3lt2gc8q Displaying more than one “Unit” in a Legend may not be possible according to our tests. This can be displayed in our Markups List, and we can create Summary Reports with multiple units and data. You can submit a feature request to Bluebeam here: community.bluebeam.com/bluebeam-community

• 
  @wailianglee23799 күн бұрын

  HOW did you create the custom markup summarising the concrete area?

• 
  @DigitalDraftingSystems8 күн бұрын

  We created the custom “Concrete Area” markup by creating an “Area”, opening the “Properties” panel, and selecting “Edit” next to “Show Caption”. You can turn on many captions, including “Label”. Then, in the “Label” section near the top of “Properties”, you can type any text you want. It will display itself on the PDF after you select a blank section of the PDF or if you select another section, such as “Subject”. We created a tutorial for this around a year ago: kzread.info/dash/bejne/eXZhq6aQid2tY6w.htmlsi=ftPe_ohPdwunjh6Y If you navigate to 7:18 in the video, you’ll find the section where we demonstrate how to create a customized area markup.

• 
  @pranavbala49229 күн бұрын

  Do we have to set the workflow by choosing somewhere whether the project has live linking or shared linking or shared and consumed linking methodology? Or is automatically determined when model coordination is turned on?

• 
  @DigitalDraftingSystems8 күн бұрын

  Hello. The Shared, Consumed and Live linking is all determined based on how the files are linked to and what workflows you follow when going about the project process (sharing, consuming, etc.). This should all be covered in the Docs and Design videos in this same playlist. From there, you can set whatever folder you choose to be your Model Coordination space and any project in that folder will be clashed.

• 
  @LeonardoLima-vk3hh11 күн бұрын

  You saved me man. Thank you very much for share your knowledge, keep it up!

• 
  @MuhammadAbdullah-cj6nx12 күн бұрын

  You didnt cover multileader ?

• 
  @DigitalDraftingSystems8 күн бұрын

  We have another video on Multileaders: kzread.info/dash/bejne/ZoqCqNtyZdvUp9Y.html&ab_channel=DigitalDraftingSystemsInc.

• 
  @urvicontractor-d1r14 күн бұрын

  really good explanation & helpful.

• 
  @SUL-KSA17 күн бұрын

  great, thanks

• 
  @kingsleyemeka213627 күн бұрын

  Thanks so much for the info.

• 
  @dominiquevanderwesthuizen177629 күн бұрын

  Culverts isnt flat its sloped easy to draw things when its flat

• 
  @w.1983.sАй бұрын

  Good afternoon, professor. Did you use feature lines for the sidewalks and the amount of concrete? Wouldn't it be better to use alignments, profiles, and assemblies?

• 
  @RitulPanchalАй бұрын

  Hellooo

• 
  @brendank6324Ай бұрын

  how do i get the line tool, polyline, circle, arc, etc permanently on? I have to click a drop down on the "draw" tab everytime

• 
  @_Areknames_Ай бұрын

  Thank you, a question: is it possible in the clash results to perform a "group by" a specific property selected by the user among the availables if i have non revitv graphic files with their own peculiar properties ? or, in other whords : is it a customizable filter quesry for the group by? thank you

• 
  @DigitalDraftingSystemsАй бұрын

  Hello. Sadly we are a bit limited in this respect, but what you can do is change how they are grouped (from a list of pre-defined parameters). To do this, click on the "Filter and Group" button near the top of the list when viewing your clashes. Here you can change the grouping from by Obrject to a number of other options. Hope this helps!

• 
  @gr131Ай бұрын

  Can I copy cutout or duplicate? If I copy and paste cutout, it pastes the area as well. In my case Area is a facade and I have windows as cutouts, lots of windows, so currently I manually draw every window cutout...

• 
  @DigitalDraftingSystemsАй бұрын

  Yes, Polygon and Ellipse Cutouts can be copied and pasted onto other parts of the same area and onto different areas. We can right-click on the center or edge of the Cutout, and the right-click menu should show “Delete Cutout” if done on the Cutout and not the Area itself. You can then mouse-over an area, right-click, and select “Paste” from the generic right-click menu. We’re using Revu 21.1, but this has been available since Revu 2017. Here’s a link to the “Release Notes” for Revu: support.bluebeam.com/articles/release-notes-bluebeam-revu/, and here’s the section that talks about how Cutouts were improved: “Along with the new ellipse cutout option, cutouts can now be copied and pasted within Area and Volume measurements. Additionally, the polygon cutout can cut through an edge of an Area or Volume measurement, reforming the overall boundary of the measurement. Automatically fill cutouts by selecting an area or volume measurement and clicking inside the cutout region. Hold the SHIFT key to fill all remaining unfilled cutouts.

• 
  @TheSuperman0822 ай бұрын

  GREAT VIDEO !! How do you (in family change the line colour) - would like to save different line types like hot, cold, gas and drainage as sperate families without overriding graphics the whole time

• 
  @DigitalDraftingSystems2 ай бұрын

  Thank you! To solve this, you'll likely need to set up a graphics override for the specific line type you're working with. Check the filters first to see which line types are involved. For each line type, you'll need to create a separate line type family. Once that’s done, you can either apply a color override to each one, or you could just create the line types in the color you want right from the start. This way, you can save them as distinct line types, making things a bit simpler and clearer.

• 
  @TheSuperman0822 ай бұрын

  @@DigitalDraftingSystems great i will try this and thank you for speedy reply!!

• 
  @adamhadji54882 ай бұрын

  Great educational video, very informative and straight to the point.

• 
  @KarimKmsi2 ай бұрын

  i have revit 2024 latest ,downloaded latest twinmotion 23.2 version access into revit but when i click on twinmotion button in revit it imediatly show an error message that i didnt find any help or a similar problem anywhere in the internet hope that you could help or have any idea bout the problem... and yes iwas in 3d view when opening twinmotion and it still crashes

• 
  @DigitalDraftingSystems2 ай бұрын

  Hello. Make sure you download the TwinMotion installer from the Autodesk site directly, it will not be the regular Twin Motion version.

• 
  @rubinbhusal85002 ай бұрын

  How to measure in mm or m?

• 
  @DigitalDraftingSystems2 ай бұрын

  While we can set our page’s scale to “cm” or “mm”, along with “m” and “km”, this won’t change each subsequent measurement, and while we can also change each measurement’s units, this will be reverted for new measurements after the first one. This can be fixed by right-clicking on a measurement set to metric units and selecting “Set as Default”. This will need to be done for all measurements and only affects our shortcuts. We can also save these measurements to our Tool Chest and retain our metric units. If you want to exclusively measure in metric with all programs, including Bluebeam Revu, you’ll want to change your Windows settings by selecting the “Start” menu, selecting “Settings”, and searching for “Measure”. The setting labeled, “Change the way measurements are displayed” should pop up, and selecting this text will lead you to the “Region” dialogue. After selecting “Additional settings”, we can change the “Measurement system” from “U.S.” to “Metric”.

• 
  @BIPINCPATIL2 ай бұрын

  I want to measure distance in mm, but every time I start new measurement, units of the measurement automatically goes back to inch-feet. It is very frustrating. I want it to set permanently to metric units, how can I set default Units to mm?

• 
  @DigitalDraftingSystems2 ай бұрын

  While we can set our page’s scale to “cm” or “mm”, along with “m” and “km”, this won’t change each subsequent measurement, and while we can also change each measurement’s units, this will be reverted for new measurements after the first one. This can be fixed by right-clicking on a measurement set to metric units and selecting “Set as Default”. This will need to be done for all measurements and only affects our shortcuts. We can also save these measurements to our Tool Chest and retain our metric units. If you want to exclusively measure in metric with all programs, including Bluebeam Revu, you’ll want to change your Windows settings by selecting the “Start” menu, selecting “Settings”, and searching for “Measure”. The setting labeled, “Change the way measurements are displayed” should pop up, and selecting this text will lead you to the “Region” dialogue. After selecting “Additional settings”, we can change the “Measurement system” from “U.S.” to “Metric”.

• 
  @DigitalDraftingSystems2 ай бұрын

  While we can set our page’s scale to “cm” or “mm”, along with “m” and “km”, this won’t change each subsequent measurement, and while we can also change each measurement’s units, this will be reverted for new measurements after the first one. This can be fixed by right-clicking on a measurement set to metric units and selecting “Set as Default”. This will need to be done for all measurements and only affects our shortcuts. We can also save these measurements to our Tool Chest and retain our metric units. If you want to exclusively measure in metric with all programs, including Bluebeam Revu, you’ll want to change your Windows settings by selecting the “Start” menu, selecting “Settings”, and searching for “Measure”. The setting labeled, “Change the way measurements are displayed” should pop up, and selecting this text will lead you to the “Region” dialogue. After selecting “Additional settings”, we can change the “Measurement system” from “U.S.” to “Metric”.

• 
  @miroahcomirt2 ай бұрын

  Great. I hope you'll post a video on how to incorporate line colors with that. Thanks a lot.

• 
  @trentwilliams97522 ай бұрын

  Love the video, have you created the next video that you mentioned for the pan tool on landscape vs. portrait? I am interested in learning how to get the pan tool with the arrow when the magnifying glass is there instead.

• 
  @DigitalDraftingSystems2 ай бұрын

  We’re glad you enjoyed the video. The Pan tool acts the same on Landscape and Portrait pages, and when we hold the “CTRL” key, we can toggle between “Scrolling Pages” and “One Full Page”. This is how you can change the icon next to the Pan tool from a magnifying glass to two arrows facing up and down. We created a video that illustrates this a couple of years ago: kzread.info/dash/bejne/ZWae0NSmY5q8Zs4.htmlsi=vf81xzAMMsBNPvru

• 
  @josephmartin98292 ай бұрын

  Having issues with image rotation within the schedule. Any suggestions?

• 
  @DigitalDraftingSystems2 ай бұрын

  We don't believe there is a way to do this in Revit. One suggestion would be to rotate the image outside of Revit, save it and then bring it into Revit/ the schedule. We hope this helps.

• 
  @jenellholt46422 ай бұрын

  Whoa, this was super helpful! Thank you!!

• 
  @hailleenunn15612 ай бұрын

  My layer states are in my xref and when I click the dropdown for my viewport in my sheet it doesn't update, just reverts back to "Unsaved Layer State". Any suggestions?

• 
  @DigitalDraftingSystems2 ай бұрын

  The Layer States must be created in the DWG with the layouts. Any Layer States in an XREF won’t work if the XREF is linked to another file.

• 
  @build_right_once2 ай бұрын

  very well explained, one of the best tutorial videos i've seen about Blue Beam! The man had everything ready (saving lots of time) and he jumped right into the meat and potatoes, and that is what makes it so appealing, because the focus was not lost. Thank you so much! _From MX

• 
  @DigitalDraftingSystems2 ай бұрын

  Thanks so much for your kind feedback!

• 
  @user-pq7vs7bi5p2 ай бұрын

  This might be a silly question, but does this only work for raster files? Or can it work for scanned PDF's as well? Great video by the way!

• 
  @DigitalDraftingSystems2 ай бұрын

  Thanks! These tools only work for vector data and not scanned files/photos/images.

• 
  @user-pq7vs7bi5p2 ай бұрын

  @@DigitalDraftingSystems Ah, I figured that but just wanted to make sure. Thanks for the quick response!

• 
  @SoudagerAamer3 ай бұрын

  Thanks a ton for this brother!

• 
  @Santigo7053 ай бұрын

  Great tutorial. Thanks!

• 
  @zoyafroloff47553 ай бұрын

  Thank you, it was very helpful!

• 
  @TrclarkWT3 ай бұрын

  Is there a way to synchronize only some views? Say I have 4 views open from the same PDF, but I only want to synchronize 2 of the four views. Is that possible?

• 
  @DigitalDraftingSystems3 ай бұрын

  According to our tests, we don’t believe it’s possible to synchronize only some views and not all views/sheets/files. We can go to suggestions.bluebeam.com/ideas/new and suggest this neat feature.

• 
  @lizpaolahuamanchayperez62933 ай бұрын

  gracias, por fin pude solucionarlo!

• 
  @dirtbagfilthyINC3 ай бұрын

  this was very helpful but im having trouble synchronizing media and page size on 2 pdfs. any help?

• 
  @DigitalDraftingSystems3 ай бұрын

  We can click on the arrow pointing down next to the “Synchronize Views” button on the bottom-right and change between “Page” and “Document”. Also, different page sizes still use the same “X & Y” coordinates, and 0,0 is on the upper-left side of all PDFs regardless of their size.

• 
  @balapesar4 ай бұрын

  @1:40 there is a "pin" botton on the left bottom conrner of the Action Recorder drop down that prevents the window from disappearing.

• 
  @DigitalDraftingSystems4 ай бұрын

  We tested that pin with different versions on different computers, and we found that it didn’t keep the window open when we switched to another tab in our Ribbon to use a command. If you had successful results when using the Pin icon, please let us know.

• 
  @Landscape_Architecture4 ай бұрын

  Great video!

• 
  @surveyminghing59944 ай бұрын

  thx for your help to tell me the CUI setting at the top workspaces to modify the selection to cope with the floating bar to the fix top setting... I am here to say FUXXING THANK YOU brother as your video is really really great helpful to solve the FUCXING AUTOCAD jaming setting sometimes! 👍👍👍👍👍👍👍👍👍👍👍👍

• 
  @sergio_henrique4 ай бұрын

  Great tutorial. Clear and concise. Very useful function.

• 
  @dougfinlay75314 ай бұрын

  I use CPS Civil Tools which has an awesome grading function better than the C3D grading tools.

• 
  @eddie44534 ай бұрын

  I called it “fil-ey” in college until a grey-beard profesor told me its pronounced “fil-ett” as the word is derived from “filling in” a weld joint. I.e., how do merge intersecting metal joints? You “fill-it” with molten metal.

• 
  @marloncastro24824 ай бұрын

  Great tutorial, you literally saved me tons of hours of work. Appreciate it!

• 
  @Ddream.134 ай бұрын

  Hi, I add an attribute in block editor and it does not appearing in my drawing,, but when i checked it using BATTMAN I can see what i added. thanks

• 
  @DigitalDraftingSystems4 ай бұрын

  An existing block on a sheet won’t update if you add/change an attribute to the block file itself. You’ll want to place a new block down after updating it. If this isn’t the issue, then you’ll want to ensure that your attribute isn’t “Invisible”. This can be checked when editing the block in the “Block Editor”, selecting the attribute, opening Properties, and scrolling down to see if certain “Misc” settings say “Yes” or “No”, including Invisible.

• 
  @purplehill034 ай бұрын

  The tool and explanations are awesome. Has anyone encountered the problem of the text only coming in as UPPERCASE ?

• 
  @n_mi59064 ай бұрын

  Hi, is there a way to insert more of the same attributes and if I change one, the other change too? I need this for a column where a tile number is used like 10 times and I don't want to change every single entry.

• 
  @DigitalDraftingSystems4 ай бұрын

  If you have several of the same blocks with attributes already on your sheet, and you go back to the “Block Editor” to add more attributes to them, they will not update and include those new attributes. You’d need to replace the blocks. If you want to change multiple existing attributes, you can select the blocks with the attributes and open the “Properties” panel (If it’s not already open, you can right-click on one of the blocks and select “Properties”). Then, if you scroll down to the bottom of Properties, you’ll see “Attributes” with text to the right of it. You can change this text for all selected blocks

• 
  @robward1554 ай бұрын

  Can’t I save as or export to an original pdf that shows the markups that I can open in other apps like adobe reader ?

• 
  @DigitalDraftingSystems4 ай бұрын

  A PDF created in Bluebeam Revu can be opened in other PDF programs like Adobe Acrobat Reader with editable markups, measurements, etc. There’s no need to use the “Export” feature. Nevertheless, if you use the “Archive as PDF/A” option and change the “Save as type:” to “PDF Files”, you can essentially create a “copy” of your PDF. However, this is much more easily accomplished by simply using “Save As” within Revu. Note: Some markups created in Bluebeam Revu (Cloud+, Typewriter, etc.) may not be compatible with other PDF programs since those programs don’t have the same markup tool(s).

• 
  @robward1554 ай бұрын

  @@DigitalDraftingSystems Thank you. Found out today I can open in Adobe with no problem. Never used Blue-beam before. Loving it.

• 
  @jmscott314 ай бұрын

  Well, maybe you can explain how to add a flipping hyperlink to a stamp. Do I really have to "control shift V" for 450 pages to paste a hyperlink hotspot? It's ridiculous. I can't for the life of me figure out how to place a simply hyperlink on all my pages, in the same place, simultaneously. Love REVU, but I also hate it. Your help (if helpful) would be amazingly appreciated lol. I'm desperate.

• 
  @DigitalDraftingSystems4 ай бұрын

  We can create the stamps on all 450+ pages first by using “Paste in Place”, and if you have Revu Complete/eXtreme, you can select “Batch” at the top of the screen and select “Apply Stamp”. After placing the stamp on all pages in the same spot, you can select all 450+ stamps in the Markups List by opening the list, selecting one stamp on your sheet, and using the “Shift” key to select all of them in the list at the same time. Then, you can right-click on one of the stamps on your sheet (Not in the Markups List), select “Edit Action”, and create your hyperlink. This will apply the hyperlink to all 450 stamps at the same time. This can also be done for regular Markups and Measurements. You can also go to “Batch” and select “Link” to apply a hyperlink to all 450+ pages at once.

• 
  @user-fz8lg4ei3u4 ай бұрын

  I flattened my drawings. Unfortunately I forgot to tick allow markup recovery option. Is there any way to unflatten it back. Please help me

• 
  @DigitalDraftingSystems4 ай бұрын

  If you saved the file and closed it, there isn’t a way to unflatten the file. I recommend making a copy of a file before flattening and incorporating this into your workflow. If you still have the file open, you can press the “Undo” key and “manually unflatten” your data. If you must, you can also use the “Edit PDF Content” tools to remove the flattened data and re-create it with Markups and Measurement tools. Best of luck!

• 
  @ammarth20514 ай бұрын

  Now show me wizard says (FlexNet License Finder) please how to fix it 🙏🏻

• 
  @DigitalDraftingSystems4 ай бұрын

  This message typically indicates that the product is looking for a network license. If this is correct, then you should set that up accordingly. Otherwise, you will need to change the licensing type which you can do with the Licensing Support Tool. You can find more info here: www.autodesk.com/support/technical/article/caas/tsarticles/ts/6IFPpIksTDfsCzp1JwIH5k.html Additionally, you can find more info about that error here: www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/FLEXnet-License-Finder-dialog-box-appears-when-you-try-to-start-program.html

• 
  @ammarth20514 ай бұрын

  @@DigitalDraftingSystems first thank uo to answer me inter the website to autodesk but talk about type of license I use something like this but Iam use crake it work before but now stop

• 
  @ammarth20514 ай бұрын

  @@DigitalDraftingSystems I think I will format my computer because I need work on programs

• 
  @DigitalDraftingSystems4 ай бұрын

  We are not able to help support the activation of non-valid (cracked) licenses as these do not comply with the Autodesk User License Agreement. @ammarth2051

• 
  @becherelisandovalparhuay8764 ай бұрын

  Muchas gracias por el aporte amigo, logre solucionar el problema gracias a tu video.

• 
  @user-sg5ev9jk7e4 ай бұрын

  I do not get this to work, trying your exact "workflow" and also changed the image to file-format png: but there is no result, nothing happens when i click "open". Do you have the "REVU advanced" version of the program?

• 
  @DigitalDraftingSystems4 ай бұрын

  Were you able to change the file format to “All Image Files”? During this tutorial, we were using Revu eXtreme, but this should work with Revu Standard, CAD, Basics, Core, and Complete as well.

• 
  @moalignell_14 ай бұрын

  @@DigitalDraftingSystemsthank you for your answer, i finally made it work, hade to change my plan in my profile.