Пікірлер

• 
  @KlingonCaptain4 күн бұрын

  Not really any easier than any other kind I've seen...

• 
  @markburgess45288 күн бұрын

  Hi, Looking great so far. On the strength of your review I have just ordered this as my first wooden ship model. I used to build and fly balsa RC planes back in the 1990s so hope that experience and your videos series will help me be successful. Best wishes.

• 
  @Tagliamare8 күн бұрын

  That’s great! I’m sure you’ll enjoy it :)

• 
  @N6O6X613 күн бұрын

  12:07 😅

• 
  @Tagliamare13 күн бұрын

  Ahaha 😂

• 
  @salvatorecomandatore904913 күн бұрын

  Complimenti bel lavoro,, bravo,,

• 
  @ukdave5714 күн бұрын

  Nice looking finish to the hull

• 
  @pwsod16 күн бұрын

  Interesting work. I have been experimenting with Danish oil instead of shellac. The oil gives that 1960s Danish furniture finish.

• 
  @Tagliamare16 күн бұрын

  oils are good, they do have drawbacks though

• 
  @pwsod16 күн бұрын

  @@Tagliamare please what are the drawbacks?

• 
  @jeanpierreragequit172620 күн бұрын

  Superbe !!! Quel superbe travail ! Superb ! Very impressive work !! Greetings from France.

• 
  @Tagliamare20 күн бұрын

  Merci!!

• 
  @TeeFunkable26 күн бұрын

  This is a pretty nice series, it's just too bad one has to watch it muted due to ever repeating super annoying jingle so it's almost impossible to tolerate it long enough to hear if you actually say anything at any point.

• 
  @Tagliamare26 күн бұрын

  I think I improved since the date of this video :)

• 
  @UserEzekyel91127 күн бұрын

  Where do you get the frames?

• 
  @Tagliamare27 күн бұрын

  Included in the kit

• 
  @gaylanbishop1641Ай бұрын

  Friggin’ awesome! Both the model and the video.

• 
  @carlocalcamuggi8118Ай бұрын

  Spettacolare veramente un lavoro da Maestro……

• 
  @TagliamareАй бұрын

  Grazie!!

• 
  @g-kipАй бұрын

  Nice work on the Planking, nicely explained, ive not seen a model before with the thin planking as a first layer, makes life so much easier less hassle to bend. Great video

• 
  @TagliamareАй бұрын

  Thanks!

• 
  @pwsodАй бұрын

  I love the planking stage of construction and find it very Carthaginian, no that is the wrong word. Cathartic is the correct word. I dread the rigging stage of construction as I have King Charles 111 sausage type fingers.

• 
  @TagliamareАй бұрын

  Ahahah

• 
  @TagliamareАй бұрын

  Check out my other videos on planking the hull: 📌 Complete single layering technique for curved bows (hard wood): kzread.info/dash/bejne/imWMxMirmrrFdZM.html 📌 Second layer of planks for straight bows (soft wood): kzread.info/dash/bejne/lI6btLukj7u3ZKg.html 📌 First layer of planks for stright bows (soft wood): kzread.info/dash/bejne/mod_q6-smcfKqrQ.html 📌 Single layer of planks with plywood for small boats: kzread.info/dash/bejne/k2p7t6RpYNi1h7g.html

• 
  @GregWilson635Ай бұрын

  Nice work on the planking. Using the tape to get the shape on the last plank is a really good idea!

• 
  @cajunfriedfoxАй бұрын

  Love your videos hope to see more of your work

• 
  @leespender4774Ай бұрын

  I just subscribed and nice work on the first layer of planks i am building the same kit also installing the last few planks on the first layer looking forward to the next video

• 
  @ladygardener100Ай бұрын

  Looks like a clove hitch to start

• 
  @andreastimper9848Ай бұрын

  On the other side of the machine you don't need four hooks, one in the middle would suffice perfectly, because on that end, the three or four strands are supposed to come together anyway. Other than that, you built a very fine machine 👌

• 
  @TagliamareАй бұрын

  That’s wrong. You’re talking about the traditional method and in that case you need a third component

• 
  @liviumodreanu91Ай бұрын

  haw make dedeyes model

• 
  @TagliamareАй бұрын

  that would be a nice topic for a new video =)

• 
  @gwheydukeАй бұрын

  Very interesting. Your deck looks very realistic. We visited Italy in April, but were unable to get to Florence this time. Best of luck with your beautiful models! Abbiamo viaggiato in Italia ad aprile ma sfortunatamente non siamo riusciti a raggiungere Firenze in questo viaggio. Ti auguro il meglio con i tuoi splendidi modelli!

• 
  @TagliamareАй бұрын

  Good opportunity to visit Italy again 😂 Il tuo Italiano è perfetto! Grazie!

• 
  @gwheydukeАй бұрын

  That's very cool. Well done. 👌

• 
  @gwheydukeАй бұрын

  Great video. Lots of helpful ideas on making the skylight hatch. 👍

• 
  @pwsodАй бұрын

  Impressed with your gigantic big silvery things. What are they please?

• 
  @TagliamareАй бұрын

  Very nice and cheap bought them from Amazon Italy amzn.to/3V7ALPd Also this ones might be very good from Amazon com amzn.to/3QPoo7C

• 
  @pwsodАй бұрын

  @@Tagliamare thank you for the link. Ordered.

• 
  @Yorkie285Ай бұрын

  What glue are you using?

• 
  @TagliamareАй бұрын

  Is the pattex white glue

• 
  @Yorkie285Ай бұрын

  @@Tagliamare Is that a high tack glue, I see you are using push pins on the 2nd planking. Did you use any CA glue?

• 
  @TagliamareАй бұрын

  It’s multipurpose pva glue, nothing special tbh. I tend not to use CA glue

• 
  @Yorkie285Ай бұрын

  You videos are very educational, just bought the Essex. Question? when at the rigging stage, how do you know what length to cut the threads to start the rigging. Looking at the instructions, it shows mm but not sure if I should cut longer for tying & cutting. Any info appreciated.

• 
  @TagliamareАй бұрын

  Thank you, appreciate it! You can cut the ropes ones you finished it, no need to take measurements. I am sure you will find some useful information in the playlist below Basics of rigging model ships: tutorials and techniques kzread.info/head/PLjLFeG6md-d2H60iOp3HwXxUsrA0gD0wg

• 
  @Yorkie285Ай бұрын

  @@Tagliamare Not sure what you mean cut the ropes when you finished it, I want to be able to cut the length then have enough to rig it it with a little extra for tying then trimming. Thanks

• 
  @TagliamareАй бұрын

  I mean Why do you have to cut the length before making the rigging? You can just use the full spole

• 
  @diadedescansoАй бұрын

  Es como un poco gruesa la madera que has elegido para hacer el las quadernas y la quilla del barco ?

• 
  @TagliamareАй бұрын

  keel and bulkheads are 3mm thick. But I believe this information it is not enough to assess the structure's strenght

• 
  @diadedescansoАй бұрын

  @@Tagliamare Te digo la verdad en el vídeo parece ser madera mucho mas gruesa pero si con 3 mm de la quilla y la estructura tienes un barco resistente cuando este forrando el casco y la pintura lo va hacer mas resistente

• 
  @TagliamareАй бұрын

  Consider also that the keel is going to be cover in a 1mm pear wood sheet

• 
  @diadedescansoАй бұрын

  @@Tagliamare Bueno eso creo que varia en cada carco es diferente en el que yo estoy construyendo la cubiera tiene 2 mm! y luego la recubri con laminas 1 mm asi que quedo en 3 mm!! le vas hacer recubrimiento a la cubierta ?

• 
  @Olichi60Ай бұрын

  It is very interesting to see such a different construction technique.

• 
  @romeancient3971Ай бұрын

  👍🔥 nice video.

• 
  @TagliamareАй бұрын

  Thank you!

• 
  @xxavier5369Ай бұрын

  Hi, it's okay, this hull is going to be super strong with all these reinforcements.

• 
  @Nikofox80Ай бұрын

  Ciao Compleimenti per i video che fai Bellissimi una domanda perchè al minuto 5:36 hai usato 40di colla e 60di acqua e non hai usato solo colla ? Grazie :-)

• 
  @TagliamareАй бұрын

  Ciao Nicola! Grazie mille, per questo progetto sto cercando di seguire per filo e per segno le istruzioni in modo da testare la bontà del kit. Io penso che il costruttore abbia preso questa decisione perché un collante diluito penetra meglio nell’MDF andando a creare una struttura molto più resistente

• 
  @Nikofox80Ай бұрын

  @@Tagliamare tutto chiaro Grazie mille per la risposta continuerò a seguire i tuoi Video Grazie e Buona continuazione :-)

• 
  @pwsodАй бұрын

  Amazing. I know it was speeded up, but it looked like you were enjoying yourself. Did you have to finely trim the deck to fit or did you just cut it out and fitted.?❤

• 
  @TagliamareАй бұрын

  Cut and fitted at 99%. Just a very small adjustment on a side :) but that might have been my fault

• 
  @nheatherАй бұрын

  Is this a reworking of the original Caldercraft model or totally new/different?

• 
  @TagliamareАй бұрын

  Totally different

• 
  @leespender4774Ай бұрын

  Nice unboxing i have just ordered this kit couldn't resist

• 
  @bramdamvan25242 ай бұрын

  I got into the model ship building hobby just two years ago with the tiny 18ft cutter kit from Vanguard Models. After that, I built the Duchess of Kingston model (I can highly recommend it!) I am sure I would have given up on this hobby without the elaborate manual and plans that come with the kit. Currently I'm building the HMS Indefatigable from Vanguard Models and I'm thoroughly enjoying it, thanks to everything I've learned on these two first kits.

• 
  @igormanuilovich14222 ай бұрын

  Respekt.Bravissimo!

• 
  @xxavier53692 ай бұрын

  ciao, Super little ship which can be a real little gem, it would tempt me, can't wait for next week for the start of the assembly, you scare me with the xsato 😮in your hand already that you have a doll on the go, thank you for this beautiful discovery.

• 
  @Tagliamare2 ай бұрын

  Not ship modeling related injury 😂

• 
  @xxavier53692 ай бұрын

  okay! so you can continue you still have 9 fingers left. 🖖

• 
  @Tagliamare2 ай бұрын

  Exactly ahah

• 
  @pwsod2 ай бұрын

  Regarding the adjustable pin pusher. I bought one and it seems that it is more suitable for thicker pins. I tried it and it bent the very fine pins supplied with my previous Vanguard kit. So I tapped the pins in with a very light hammer. I must treat myself to the finer pin pusher soon.

• 
  @Tagliamare2 ай бұрын

  Yes pins are super light. I prefer to use pliers in this case

• 
  @bramdamvan25242 ай бұрын

  I personally own the thin pin pusher that is sold by Vanguard Models, and that one worked very well for the small nails that came with the Duchess of Kingston kit from VM.

• 
  @pwsod2 ай бұрын

  My HM cutter Sherbourne arrived yesterday. I trust your thumb is improving.

• 
  @ukdave572 ай бұрын

  Seriously considering this model and am looking forward to following your build

• 
  @yaqisthebest2 ай бұрын

  You just earned a subscriber with this awesome ship.

• 
  @pwsod2 ай бұрын

  Superb ❤models and fell in love and lust after the presentation little brass dorade clock 😮.

• 
  @Tagliamare2 ай бұрын

  Yeees I loved it tooooo

• 
  @pwsod2 ай бұрын

  @@TagliamareI noticed that the clock was made in Italia and was wondering if it was a one off or can we buy one or two? I have nautical instrument (compass or chronometer)looking wrist watch made by the Marloe watch company called a Tay which I wear almost every day.

• 
  @Tagliamare2 ай бұрын

  I can ask more infos on it and let you know :)

• 
  @pwsod2 ай бұрын

  @@Tagliamare excellent idea thank you.

• 
  @Tagliamare2 ай бұрын

  @@pwsod so, i checked you can find different versione by searching for “manica a vento orologio”. The version you see in the video is a personal thing Oscar had, im not sure you ll find the same one on sale