Welcome to my channel, I don't get "super excited" but I do try and bring some interesting and informative videos. I try and show the things I would want to know if I was considering purchasing. I hope you enjoy my content and consider giving me a follow.
I upload new videos on a regular basis so please subscribe to get a notification of when a new one goes live.
#short #shorts #shortvideo #3d #3dprint #3dprinting
Пікірлер
Are there any rice cookers that show the countdown time in progress? Not as the final 10 minute hurdle
Hi, there are ones you can set it for a specific time that will count down. I think the issue is they work on the water being taken into the rice, so it depends on the amount of water, and the type of rice used rather than a specific cooking time.
What are the parameters for the parts?
Hi, the link to the model is here - www.thingiverse.com/thing:747305 You can scale it as you wish.
Hi,are you interested in damascus knife set,Would you like to receive a free kitchen tool in exchange for your honest review?🥰
Hi, please drop me an email with you proposal. [email protected]
Thank you my dear
The email has been sent to your mailbox. Please check and reply at your earliest convenience. We look forward to our cooperation.🥰
Does it bake?
Hi, no it does not.
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
does it still work ?
I would like to know which of the Phomomo D30 or Q30 lable machines has the best tech specs and the best variety options? I have watched both your reviews but could not find anyone doing a comparisson on these two machines. Can you please give your opinion on the difference between the two? Does the D30 alo only work on bateries or is it rechargeable?
Hi, there is very little difference results wise between the two. The D30 is rechargeable, and they both use the same software, and there is no noticeable difference on results.
Único vídeo que realmente mostra algo! Parabens !
Thabks Chris, great review and love how you answered the questions in the comments
Hi, and thank you for the kind comments, it's most appreciated :D
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
Weight of this watch?
Hi, just weighed it 141.5g with strap.
Chris, which pad you use for applying the polish and which one for signing purpose? There are 2 orange pads, one straight surface and one with crests and truph.
Hiw do you clean the middle bit around the filter?
Stupid video nothing can see clearly
Thank you
that's a LOT of nozzles. I use ONE which has been doing great for the last 2000 hours of printing (roughly 60kgs). I might use 1 per size and have a spare of my most used one, but couldn't imagine having dozens of nozzles around ever since I swapped to decent quality ones instead of the chinese knockoffs...
Hi, I tend to change the nozzles after around 15kgs as an average I would say. I change them as a matter of course, rather than having any issues as they are fairly inexpensive.
@@Kalbo64 depends on the nozzle I'd say. i used to run €3 AliExpress nozzles, but my current one is a €60 obxidian...
Interesting, I have not tried the obxidian nozzle's before, so did a bit of research. I don't get any quality issues, and print in PLA 90% of the time, would you say there are still advantages for me switching?
@@Kalbo64 If you're printing only PLA (without additives) then probably not. I printed a lot of PETG-CF and the CF would wear the nozzles out in 3-4kgs. PETG also loves clinging to the regular brass nozzles, but much less so to this obxidian one.
Thank you I really do appreciate the replies as it isn't something I had even looked at. I think I will take the plunge and try one out on one of my printers.
This video was very helpful! I bought one of these for over 50% off at a discount store in the US (w/ regular US plug), and the English section of the manual read like it was written by someone who didn’t speak English, possibly at all, in a language not native to them that also wasn’t English, then run through a very old version of Google translate to convert it to English. So it was not clear at all if it was safe to open the fryer drawer while cooking or if it would go back to the same settings when put back in, and I wasn’t ready to experiment yet! With that, two questions: 1) was your manual similarly insane? 2) I very much want to know and don’t intend this to be a jackass at all - why did you handle raw chicken then touch a bunch of stuff with the chicken juice hand? Did you disinfect all those spots off camera? This is truly eating me up inside and I can’t get past it. Thank you!!!
Hi, the manual wasn't the best for sure. I have found so many of these products have as you say been "google translated" manuals. I did wipe everything down while it was cooking. The opening and closing of the draw while cooking is a standard feature on air fryers, and it is perfectly safe.
Thanks for the reply!! This is my first air fryer of my own, previous housemates had the toaster oven style (do not recommend), good to know.
How long does one bottle last
Hi, 100ml lasts about 3 weeks for us.
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
Need one for the same application in and around 3d printers.... does Dehumidifier add much heat to the room and do you notice it making an easier time of drying and printing with PLA? ( fewer first layer issues, stinging, etc ...) Thanks for the review
Hi, it does not really add to the room temperature. Drying wise I have no real quantifiable before and after using it, but I don't or haven't had any moister issues since using it.
Woahh, cool Cyber Bee man 🍻🐝
Did you notice any decrease in the suction power?
Hi, it seems as strong as when I first got it.
Purchased Nov. 2023. Machine is not working, just continues to make a clicking noise. Cannot find warranty information, customer service information or trouble shooting guide.
Hi, I can only suggest contacting the retailer. I have no connection with the company what so ever. Hope they can sort it out.
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
Whats the app?
Hi, sorry I don't recall, and no longer have the camera. It worked well for several years until I lost it.
Did you cook a whole chicken in 20mins?
Hi, yes although it was a small chicken, and cut in half which reduces cooking time.
Can you tell me how to get my fitpolo to run. I have it paired and connect to Bluetooth
Hi, I can only really refer you to the manual covering the functions and setup. I have no connection what so ever to the company that sells of produces fitpolo.
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
For some reason I can't get into the program to show results and it comes up saying Bluetooth function and device needs to connect. Where is this
Hi, you need to connect it to your phone via Bluetooth. It is covered in the manual.
I did but something Bluetooth function and near by device. What does this mean? I am connected to Bluetooth
That power head sounds very underpowered. Don’t have that issue at all with my V15
It's amazing what you can do and the engineering that went into that fantastic
I agree, very clever and imaginative models
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
Can you 3d print lumina from destiny
Hi, it is not one I have printed, but it can be printed.
Look good, what time did it take thanks.
Thank you :D It takes around 12 hours on my Ender 5 s1
@@Kalbo64 Cheers from Australia, thanks.
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
Ender 3 Max Neo or CR 10 Smart which is better...
Hi, I haven't used the CR 10 Smart so can't really say. It would also depend on your needs and what you are looking to print. Personally the next printer I am looking at getting is the K1 Max.
@@Kalbo64 Ok.. Thank you 👍🏻
Thanks very much! This is not mentioned in the instruction book. Cheers Rob
No problem :)
Hi Chris... I just bought this Euki electric air duster and test the battery to see if 4hrs at the speed 1 (60000rpm) is true. So after I received my unit, I completely charged the blower at 100%, turn on and select the low speed. After 1h43 minutes, the Euki air blower shut down, batteries down. So, now, I'm wondering if my brand new unit is defective or maybe it's a misleading information by the company. Can you do this test with your device and let me know. Thank you for your video and your time...
Hi, I will put mine to the test, and reply again when I have the results.....
I'm always sceptical with these devices, anything that involves fast moving parts.. I'm worried about buying this and it breaking within a year..
@@JudiP-zi4fv Hi, it does come with a 12 month warrantee, but I guess that is the case with anything from a Vacuum to a desktop PC.
Hi, good video! What does the air pump do? Cheers Rob
Hi and thank you. It is for first use or if the machine hasn't been used for a long time. It is for priming the water through the system by removing the water tank, and using the pump to push water through the system.
I just got mine yesterday, and already having issues with opening the locking lever on top,damn thing keeps getting stuck, even with a little force it won't open, I really can't see what I'm doing wrong, anyone else having problems with this?
Hi, I have seen a few people saying they have this issue, but have not seen any solution. Personally I have not experienced this, and mainly use nespresso pods. The lever does take a fair bit of pressure to close and release, I presume by design in having to puncher the pods. I can only really suggest contacting the supplier.
They told me you don’t need a soft box for these lights as a key light. Surely that’s not right?
Hi, sorry I am not experienced enough in lighting to give a confident reply, hopefully someone else will be.
Next time hold/tape fans so you dont risk breaking em
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
I have this exact printer and it prints like a dream but I can’t for the life of me figure out how to print when you have just ONE label left. I just can’t figure out how to load just one label. It seems as though the printer isn’t capable of this? It has to be at least two labels connected in order to print. Is there a way to trick this thing into loading and printing from just one single label not attached to a whole accordion of labels?
So you just randomly selected which pads to use?
Hello, wonder is it quiet while running
Hi, it is fairly noisy when the blending is taking place in short bursts.
@@Kalbo64 thank you for replying! Have a nice day
Can I print on fabric 🎀 ribbon with this
Hi, I don't believe you can.
Hi. I recently 'found' your Cats Vase on Prusa Printables & am coming to the end of its 1 day+ printing time. I like the fact that the surface of the moneybox has a texture to it. I think it makes it more 'tactile'. I have a question: Would it be viable to move the slot to the back of the cat's head? It would allow a lot more money to be held in the box. Thanks for your great designs.
Hi, thank you for the kind comments :D I did consider putting the slot at the back top of the cats head, but I was concerned the coins might get trapped in the neck, so put it on the back.
@@Kalbo64 Ahh, now that's something I didn't think about, lol! It's a logical decision when one thinks about it. As I type, the vase is almost done. Just 20 minutes to go. I printed it at 0.01 layer height & the detail is absolutely fantastic. The moneybox will be next.
Hope the vase turns out well, and thank you for the interest and kind comments.
@@Kalbo64 The vase turned out extremely well. Not one 'glitch' in the print at all. Thanks for making such a great design available.
@@steveashforth5097 You are welcome, and I'm glad it turned out well :D
What about battery life..?
Hi, it does depend on the mode you are in, but on the highest power between 15-20 minutes run time.