This channel focuses on old Toyota pickups, 90s Subaru legacys, and other car and motorcycle based content. Repairs, how to's, offroading, adventures, and much much more! If you need to get ahold of me, email me directly at [email protected]
I got an 92 4Runner w EFI, my grandpa is a mopar guy and we rebuilt my engine. I thought he just tuned it differently😂 we did the timing like 12 times. It’s a pain in the ass, at this point I accept my Asian off road vehicle is now tuned to muscle. 😂🤓
@Lukin-lx9dnАй бұрын
so it wasnt a head gadket failure?
@erberIsSillyhawkАй бұрын
tried this today gues my hands are too fat, taking off the motor mounts tomorow.
@GratefulEd907Ай бұрын
How long should this take start to finish without recording a video for it? I want to have this done on my truck and the price of the spartan isn’t bad it’s the mechanics time that’s gonna be a deal breaker for the wife though.
@danielwagoner19w83Ай бұрын
Thank you so much man you helped me a lot with my wife derby car
I have an 88 4Runner with the 3.0 one of the first ones to get the 3.0, I was told there were differences but I figured the engine has to be the same and after a lot of confusing info I went ahead and stuck a new crate engine in and it runs well, The 3.0 in this seems to have plenty of power still I wonder about problems that could show up after some miles
@jessecan2 ай бұрын
So you removed the glass, not the sunroof
@DalorianShep2 ай бұрын
I am so happy to see another Medalist! I have one that is my baby and currently working on. Yours looks great!
@Toyotas_n__Tools2 ай бұрын
Hey Chris do you have a front skid plate for a 89-95 4x4?
@princeali25553 ай бұрын
sexy feet 🦶🏼 brah
@matthewkirkham82344 ай бұрын
Did you have to grind the glass or window seal to make it fit right?
@martykirkpatrick63474 ай бұрын
Is it necessary to bleed front AND back brakes when changing front brake calipers?
@chriscollison31365 ай бұрын
I got rid of fuel line from the tank to The rail by the dampener and put -6an braided line with a cleanable filter on the frame rail cause the factory fuel filter is a pain im the Aaa. But with that and some bigger Imjectors I picked up a crazy amount of power. Oh and a 340lfm racing pump.
@chriscollison31365 ай бұрын
I got rid of fuel line from the tank to The rail by the dampener and put -6an braided line with a cleanable filter on the frame rail cause the factory fuel filter is a pain im the Aaa. But with that and some bigger Imjectors I picked up a crazy amount of power. Oh and a 340lfm racing pump.
@Matthew.Christensen6 ай бұрын
How has the seal worked out for you over the last 3 years? Any leaks? I'm about to start the same project, debating on getting the same gasket you used
@TRyan-op2jo6 ай бұрын
Great video. Thanks!
@user-oc2jl3cp2d6 ай бұрын
weird that the torque converter leaking trans fluid when aimed in the pour position
@DeaFBRED5 ай бұрын
Haha
@Srulio7 ай бұрын
Yeah, I bought the Subaru Crosstrek new and I never wanted the sunroof because I expected it to be a trouble magnet. And in a big rainfall episode yesterday it started to stream water from the headboard all over the electric window switches. I hope a can of pressurized air will be enough to fix this problem.
@gordong.51547 ай бұрын
badass
@coltwinchester61247 ай бұрын
Did you ever make any update videos on your camper?
@ernestogarcia80147 ай бұрын
Looking to 3.4 (5vzfe) swap my 2nd Gen
@Johnfor37 ай бұрын
I just bought one last weekend just like for 300
@shadrichardson66277 ай бұрын
"I did not do a very good job." 😂 Subscribed. Good stuff, brother.
@baziljames94958 ай бұрын
Hey have you ever had to change your mass air flow sensor. Which type or brand did your replace it with if you did
@billieswiney40478 ай бұрын
Did the valve cover gasket replacement no oil leak now but my car is sputtering now what did i do wrong please help
@cdcorrigan8 ай бұрын
Do you need to put any sealant on before putting in the windshield?
@jamesdotson64929 ай бұрын
The two I have done I have to lift up driver side motor a little very greasy LOL
@philsil13049 ай бұрын
My car lives under trees and I get this annually. I have an old bicycle brake cable in my toolroll and use this to clear out the channels at the front of the sun roof.
@cdcorrigan9 ай бұрын
No sealant required ?
@victorrosario41099 ай бұрын
He has all these other older toyotas. 🤘🏻
@fransbernardo281910 ай бұрын
Did you had a hard time getting the motor back in to the transmission I just can't get the last inch to set.
@yabeguns1ezu3 ай бұрын
This 4runner will never run again.
@lensmanicfeleven184710 ай бұрын
...is that a long crack across the driver side bottom?...
@AbsolutePaintingLLC10 ай бұрын
Is this the same on 97’ Subaru outback?
@seeharvester10 ай бұрын
But-ton, not butt-in.
@trentorr11 ай бұрын
my factory sunroof is different looking but same size
@trentorr11 ай бұрын
pnw yota owner! my current sr5 2wd short bed has a factory sunroof its a mojave
@martinphilips609111 ай бұрын
I've never had a diff apart. I couldn't really tell what you were doing.
@boondocksoverlandandoutdoors11 ай бұрын
Dude what a deal!!!! And yooo you slapped it on a 80s Yota?! Mad respect! What a sweet combo man! Happy for y’all! Looking to get into one but for my first Gen Tundra
@jacobmcling276411 ай бұрын
u quit making videos? really been enjoying them
@kennethbigham992011 ай бұрын
Stupid question but do u have to pull the support and drop the trany? 😢
@dirtstravaga76264 ай бұрын
I didn't, just a lot of swivels and extensions. I also unbolted my crossover and tied it up and out of the way. Probably not any easier though.
@0780marco11 ай бұрын
Im having issues getting mine to fit, what did you end up doing to get them in? Just find the right angle?
@soldierpaige2554 Жыл бұрын
Whats the highways speed like and rpms
@user-ks2sx9kk7o Жыл бұрын
Your battery is not fully charged
@chrishorst6993 Жыл бұрын
I don’t like the three legged lift system. Just put four.
@soldierpaige2554 Жыл бұрын
Can still keep up on the highway?
@estebanpina2533 Жыл бұрын
Yo Tengo una Toyota 86.4 cilindros.es.tandar
@robertrichmond1831 Жыл бұрын
You do not need to remove the dash to get that lower plate off. Unbolt it and drill out the 5 spot welds and it lifts write off. My truck is a 86 if that makes any difference.
@mauriciogonzalez9337 Жыл бұрын
Hi, what brand of gear and pinion are you used, I'm goind to buy for my truck but I don't know what choose, which one can you recommend
@DanielAlvarez-xl4qy Жыл бұрын
Damn great job helping people like me thats learning as i go i have a 1995 4runner n im trying to fix as much as i can on my own do you know if the tranny has to come off to replace the oil pan gasket??? Im trying not to do unnecessary work🙏🙏
@legacynorthwest1249 Жыл бұрын
Transmission does not have to come off. But make sure to thoroughly clean all oily residue until you can eat off of it. And use a small bead of silicone. I use ultra black, as a gasket or on both sides of the gasket. As well as in between the windage tray and the block. You will have to remove your front differential, as it sounds like you'll be doing this job with the motor still in the truck. Again, any oil gets in there and mixes with the silicone, you'll still have a leak. Good luck!
@DanielAlvarez-xl4qy Жыл бұрын
@@legacynorthwest1249 nice thanks! Yeah im leaving the engine intact im tryinhtg to figure this out before i mess with it it has two nuts right where the tranny meets n im trying to seenif there special socket or wrench tha will fit in that tight space my 4runner is a 2wd so from the tranny it’s connected to the drive shaft thanks nee sub to your channel!👍
Пікірлер
I got an 92 4Runner w EFI, my grandpa is a mopar guy and we rebuilt my engine. I thought he just tuned it differently😂 we did the timing like 12 times. It’s a pain in the ass, at this point I accept my Asian off road vehicle is now tuned to muscle. 😂🤓
so it wasnt a head gadket failure?
tried this today gues my hands are too fat, taking off the motor mounts tomorow.
How long should this take start to finish without recording a video for it? I want to have this done on my truck and the price of the spartan isn’t bad it’s the mechanics time that’s gonna be a deal breaker for the wife though.
Thank you so much man you helped me a lot with my wife derby car
Excellent video. Totally demystified valve cover gasket job! Thank you.
I have an 88 4Runner with the 3.0 one of the first ones to get the 3.0, I was told there were differences but I figured the engine has to be the same and after a lot of confusing info I went ahead and stuck a new crate engine in and it runs well, The 3.0 in this seems to have plenty of power still I wonder about problems that could show up after some miles
So you removed the glass, not the sunroof
I am so happy to see another Medalist! I have one that is my baby and currently working on. Yours looks great!
Hey Chris do you have a front skid plate for a 89-95 4x4?
sexy feet 🦶🏼 brah
Did you have to grind the glass or window seal to make it fit right?
Is it necessary to bleed front AND back brakes when changing front brake calipers?
I got rid of fuel line from the tank to The rail by the dampener and put -6an braided line with a cleanable filter on the frame rail cause the factory fuel filter is a pain im the Aaa. But with that and some bigger Imjectors I picked up a crazy amount of power. Oh and a 340lfm racing pump.
I got rid of fuel line from the tank to The rail by the dampener and put -6an braided line with a cleanable filter on the frame rail cause the factory fuel filter is a pain im the Aaa. But with that and some bigger Imjectors I picked up a crazy amount of power. Oh and a 340lfm racing pump.
How has the seal worked out for you over the last 3 years? Any leaks? I'm about to start the same project, debating on getting the same gasket you used
Great video. Thanks!
weird that the torque converter leaking trans fluid when aimed in the pour position
Haha
Yeah, I bought the Subaru Crosstrek new and I never wanted the sunroof because I expected it to be a trouble magnet. And in a big rainfall episode yesterday it started to stream water from the headboard all over the electric window switches. I hope a can of pressurized air will be enough to fix this problem.
badass
Did you ever make any update videos on your camper?
Looking to 3.4 (5vzfe) swap my 2nd Gen
I just bought one last weekend just like for 300
"I did not do a very good job." 😂 Subscribed. Good stuff, brother.
Hey have you ever had to change your mass air flow sensor. Which type or brand did your replace it with if you did
Did the valve cover gasket replacement no oil leak now but my car is sputtering now what did i do wrong please help
Do you need to put any sealant on before putting in the windshield?
The two I have done I have to lift up driver side motor a little very greasy LOL
My car lives under trees and I get this annually. I have an old bicycle brake cable in my toolroll and use this to clear out the channels at the front of the sun roof.
No sealant required ?
He has all these other older toyotas. 🤘🏻
Did you had a hard time getting the motor back in to the transmission I just can't get the last inch to set.
This 4runner will never run again.
...is that a long crack across the driver side bottom?...
Is this the same on 97’ Subaru outback?
But-ton, not butt-in.
my factory sunroof is different looking but same size
pnw yota owner! my current sr5 2wd short bed has a factory sunroof its a mojave
I've never had a diff apart. I couldn't really tell what you were doing.
Dude what a deal!!!! And yooo you slapped it on a 80s Yota?! Mad respect! What a sweet combo man! Happy for y’all! Looking to get into one but for my first Gen Tundra
u quit making videos? really been enjoying them
Stupid question but do u have to pull the support and drop the trany? 😢
I didn't, just a lot of swivels and extensions. I also unbolted my crossover and tied it up and out of the way. Probably not any easier though.
Im having issues getting mine to fit, what did you end up doing to get them in? Just find the right angle?
Whats the highways speed like and rpms
Your battery is not fully charged
I don’t like the three legged lift system. Just put four.
Can still keep up on the highway?
Yo Tengo una Toyota 86.4 cilindros.es.tandar
You do not need to remove the dash to get that lower plate off. Unbolt it and drill out the 5 spot welds and it lifts write off. My truck is a 86 if that makes any difference.
Hi, what brand of gear and pinion are you used, I'm goind to buy for my truck but I don't know what choose, which one can you recommend
Damn great job helping people like me thats learning as i go i have a 1995 4runner n im trying to fix as much as i can on my own do you know if the tranny has to come off to replace the oil pan gasket??? Im trying not to do unnecessary work🙏🙏
Transmission does not have to come off. But make sure to thoroughly clean all oily residue until you can eat off of it. And use a small bead of silicone. I use ultra black, as a gasket or on both sides of the gasket. As well as in between the windage tray and the block. You will have to remove your front differential, as it sounds like you'll be doing this job with the motor still in the truck. Again, any oil gets in there and mixes with the silicone, you'll still have a leak. Good luck!
@@legacynorthwest1249 nice thanks! Yeah im leaving the engine intact im tryinhtg to figure this out before i mess with it it has two nuts right where the tranny meets n im trying to seenif there special socket or wrench tha will fit in that tight space my 4runner is a 2wd so from the tranny it’s connected to the drive shaft thanks nee sub to your channel!👍