Пікірлер

• 
  @olivierlambinet758411 күн бұрын

  why flaps when hovering ??

• 
  @chrisjhass14 күн бұрын

  How's the roll rate?

• 
  @colbyneal116 күн бұрын

  Why don't they come with the little mount for the led bulb.

• 
  @mariomurcia4053Ай бұрын

  Question, does it come for HV from the factory? Thanks.

• 
  @JohannCass-ez8ipАй бұрын

  Can you please do a video on how to set up hover mode???

• 
  @kchong90352 ай бұрын

  Does smoothflite with latest Jeti Duplex EX R3/RSW 2.4GHz Receiver & RC Switch w/Telemetry?

• 
  @JCFLYR3 ай бұрын

  I noticed your flight log shows over 54,000 holds which is what I am getting on my turbine with my ix20SE and Smooth Flight 16. Is this normal?

• 
  @short5stick3 ай бұрын

  How do you know it's version 2? Is it different from version 1?

• 
  @JoseOrtega-df3zj4 ай бұрын

  I use Electron gear system GS200 . I want to keep using the electron system to control my gear control and brakes. How do I bypass the AR system for gears to use the Electron system instead? Thanks

• 
  @simplercmedia39484 ай бұрын

  Is the AR EXTREME RRS shell made of metal or plastic?

• 
  @Aero_Rc.3 ай бұрын

  Metal, Really nice units

• 
  @vincehutt76165 ай бұрын

  Hello Can you extend the receiver leads with servo extensions or do they have to connect directly to receiver thanks

• 
  @tiagotales33985 ай бұрын

  One of the aileron going down and the other one going up, how change that on crow or flaperon only?

• 
  @pascalturpin35836 ай бұрын

  Hi all I hope I will find an answer to my problem here. I received a Smooth Flite 16 RRS and Ignition T-Switch, the Smooth Flite 16 RRS did receive the latest update. I plugged it all in with 2 Duplex Rex3 A20, from Jéti and I drive with a DS16 G2. All material is up to date. As far as the telemetry of the Smooth Flite 16 RRS is concerned, no problem, I have the feedback regarding the batteries and the 2 receivers. On the other hand, as far as the Ignition T-Switch is concerned, no telemetry feedback on my transmitter, the Kill switch works well, the LED turns on and off depending on the position of the switch on my radio. For your information, I wanted to mount this on a UMS 150cc 5 cylinder engine. Thank you for your answers.

• 
  @bobadingo7 ай бұрын

  I fly futaba in giant scale aircraft with 8ch recever&6volt battery,and that is all that is needed!.. .

• 
  @bernyw.35517 ай бұрын

  How can an SPM9745 be connected to a current receiver (e.g. AR6610T)? Which port or which pins should I use on the receiver? XBUS?

• 
  @wayneschenk55127 ай бұрын

  Great product.

• 
  @Flying-xh9kj9 ай бұрын

  I think what people need to see too is how and what you assign to those elevon channels. It seems obvious but I know people think it just works without doing anything else.

• 
  @Clickmaster5k11 ай бұрын

  Id love something like this for heli but where it didn't need matched batter. Being able to use the main flight pack primarily and have a small back up receiver pack would be pretty cool and useful on a lot of smaller scale vehicles.

• 
  @rickgellboomarc11 ай бұрын

  You don't need matched batteries. Wallaby switch will work perfectly well with a single battery. 👌

• 
  @Clickmaster5k11 ай бұрын

  @@rickgellboomarc That's awesome. Ill be checking these out closer.

• 
  @arcturusfpv965211 ай бұрын

  Could you guys do a video on using express lrs with the smooth flite 16?

• 
  @janmb11 ай бұрын

  Which chemistry and voltage?

• 
  @rickgellboomarc11 ай бұрын

  Chemistry is Lion. Voltage is 8.4volts max and 7.4 volts to 7.6 volts operating. Designed as high end receiver batteries

• 
  @janmb11 ай бұрын

  ⁠Awesome. In other words charged as lipo then?

• 
  @WigganRC Жыл бұрын

  Looked great Rick

• 
  @rickgellboomarc11 ай бұрын

  Thanks Richard. :)

• 
  @nickprince2774 Жыл бұрын

  Can you use the a 8020t and then hook two more satellite receivers to that so you can end up with three satellite receivers instead of only having two that come out of smoothflight

• 
  @rickgellboomarc11 ай бұрын

  Yes you certainly can. :)

• 
  @stinkyfive Жыл бұрын

  How do we update please?

• 
  @rickgellboomarc11 ай бұрын

  Please check the website, www.boomarc.com you will also need an updater

• 
  @irvinparadizobeyley8400 Жыл бұрын

  Hi, Now spektrum released a new nx 20 shouldn't have any problems with the protocols on the ARXl smoothflite

• 
  @VoySpeed Жыл бұрын

  if using 2x jeti receivers in "clone" mode, are there any different settings needed on the SM 16 to support this vs "dual path" ?

• 
  @rickgellboomarc11 ай бұрын

  Jeti Dual Path allows for both RXs to be monitored as long as they are both set to EXBus

• 
  @esskiahastings7974 Жыл бұрын

  Just recently purchased I wish the had a Starr to finish set up...this seems very complicated to get started...but I heard so many great things about this product

• 
  @rickgellboomarc11 ай бұрын

  This is only for RX telemetry batteries

• 
  @louisdeschenes3073 Жыл бұрын

  Question Will the smooth flight 16 work with a iX12 . I would use it in a 22lb jet using 3 spectrum sat receivers . 2x 4651T and one standard Dsmx sat receiver . Would this set up work Thu for your reply Louis

• 
  @rickgellboomarc11 ай бұрын

  Yes it will

• 
  @airfoilsinmotion4777 Жыл бұрын

  Thanks from a new Jeti user🎉🎉🎉

• 
  @rickgellboomarc11 ай бұрын

  You're welcome

• 
  @charlesmager5615 Жыл бұрын

  I'm trying to find out which protocol to use. Just SRXL2 or SRXL2 DX-18 mode. Does it make any difference with an IX14 transmitter?

• 
  @louisdeschenes3073 Жыл бұрын

  Good luck getting any answers

• 
  @rickgellboomarc11 ай бұрын

  SRXL2 mode for anything that isnt a DX18

• 
  @rickgellboomarc11 ай бұрын

  you can always contact us directly at www.boomarc.com

• 
  @charlesmager5615 Жыл бұрын

  I'm trying to find out which protocol to use. Just SRXL2 or SRXL2 DX-18 mode. Does it make any difference with an IX14 transmitter?

• 
  @ashleym2878 Жыл бұрын

  I was talking to a guy that said he is sponsored by you Steve malcmon his name is he said your ignition switches are no good cos they cut the engine if the radio glitches and caused a crash when it killed the engine on take off. I thought it was strange he said he was a team pilot cos he then went on saying that all booma stuff is just re branded Chinese stuff like jx servos. He also was offering to buy on his discount a smart bus to another guy at the field. I was really confused on what his deal was maybe this guy is reselling your smart buses for profit and pretends to be a team pilot

• 
  @fern6978 Жыл бұрын

  How are you connecting 4 pin SRXL2 remote satellites to the AR which only has 3 pin female ports for R1 and R2? Am I missing something?

• 
  @BDSBob Жыл бұрын

  Adapter cable....

• 
  @fern6978 Жыл бұрын

  @@BDSBob I can't find any... Hmm, any links?

• 
  @vincentlee9044 Жыл бұрын

  Without a main receiver, is this setup robust with just 2 remote? Not possible to connect to the latest spektrum main receiver with srxl2 channel?

• 
  @rickgellboomarc Жыл бұрын

  It will work fine and I know of pilots using only 2 but we recommend 3 receivers for best coverage. With SRXL2 receiver you can connect a 3rd receiver to the tel input.

• 
  @richardk302 Жыл бұрын

  What additional telemetry information is gained by using a 3rd satellite Rx?

• 
  @richardk302 Жыл бұрын

  Can a spektrum GPS unit or turbine telemetry be obtained using the 3rd port?

• 
  @AphexTwinII Жыл бұрын

  Futaba already has RX pack telemetry built in their Rx

• 
  @irvinparadizobeyley8400 Жыл бұрын

  The ARXL can work with the NX10 spektrum transmitters

• 
  @rickgellboomarc Жыл бұрын

  Yes it can. You will need up to 4 SRXL2 sattelite receivers model 4651T and 9747. Minimum recommended is 3 sattelite receivers.

• 
  @Aero_Rc. Жыл бұрын

  Hi can i use 3 of thoes serial recievers on the Ess pro RSS?

• 
  @rickgellboomarc Жыл бұрын

  Yes you can

• 
  @Aero_Rc. Жыл бұрын

  @@rickgellboomarc thanks Rick

• 
  @Aero_Rc.2 жыл бұрын

  This is why all my gear is AR gear

• 
  @Mrtcoltpilot562 жыл бұрын

  Are there specific receivers that work with RSS Extreme? I couldn't even get the receivers to communicate when bound. The bars are green, but don't move. I really need some help here. Using an IX-20 and a pair of AR6610T. Doing an airshow this weekend.

• 
  @rickgellboomarc2 жыл бұрын

  Tim, The ARXL is like a powersafe receiver so you need to use SRXL2 satellite receivers with the ARXL. 1 x SPM4651T and up to 3 x SPM9747. In the ARXL unit select SRXL2 protocol.

• 
  @Mrtcoltpilot562 жыл бұрын

  HELP, I'm having issues having the RRS, setting it up to move the servos. I've rebound the TX and AR6610 RX using an IX20. Everything is on, I selected all the right parameters and model. 2s Pulse 5000, I'm definitely bound, nothing in the monitor is moving. Been trying to for two days. New to the electronics of today but flying RC many years.

• 
  @aaronskylark88182 жыл бұрын

  Try 4 thum lyts senses ignition gearbox nut rool ignition wava starts without a kee remot Finga sensas

• 
  @lacrossewisconsin2 жыл бұрын

  That sounds amazing!

• 
  @aimanfeda53342 жыл бұрын

  please do the programing of the 16 ch & Gyro setup all with the ix20

• 
  @daz23722 жыл бұрын

  Thanks mate

• 
  @Wilmer7872 жыл бұрын

  This is awesome Does the Smooth Flite 16 and AR Extreme has the same settings?

• 
  @rickgellboomarc11 ай бұрын

  certainly does

• 
  @fulviomichelutti56692 жыл бұрын

  Good Morning, my name id Fulvio and i write you just to make a question related to GR12 and GR 16 Graupner. Which is the different between the 2 RX? I understood the 6 and 8 channels, the telemetry, but in terms to use in a regular way with simple models to use at fly models club with simple model what is the different between the 2 models? one has range 2000 Mt and the other 4000 mt but normally i fly around 300 or 400 mt in this case what is the best to use? Thanks

• 
  @don-uv2zj2 жыл бұрын

  How many Amp does units can handle? Thanks

• 
  @rickgellboomarc11 ай бұрын

  its rated to 10amps per channel

• 
  @irvinparadizo66162 жыл бұрын

  The AR smoothflite RRS ARXL came with the gyro on it and can I use Spektrum transmitter with that flight controller?

• 
  @rickgellboomarc2 жыл бұрын

  Yes it does have a built in gyro and yes it can be used with Spektrum SRXL2 or SRXL high voltage receivers. ARXL can also be used with Futaba, Jeti, Core, Jr, Graupner, FRSky. Hitech or any SBus compatible transmitter.

• 
  @irvinparadizo66162 жыл бұрын

  @@rickgellboomarc hi my friends , I about to install the landing gear on my jet, I saw in your website a 200 psi air safe fail safe gear I would like to see a video on that product using an ARXL to see how it's work if is possible for you guys..

• 
  @irvinparadizo66162 жыл бұрын

  I would like to see setting up with a spektrum transmitter like ix 12 or ix20 and receiver and. Can I used with the smoothflite

• 
  @rickgellboomarc2 жыл бұрын

  We will be posting more videos in early 2022 and will look at adding this for you.

• 
  @irvinparadizo66162 жыл бұрын

  Thank you guys, I put together my first turbine jet and I would like to set the jet with a good and easy to setup flight controllers , I watched few of your videos and I interesting to give you a chance to your brand.